When running dumpe2fs on a filesystem formatted with flex_bg, it
prints out the relative offsets for the bitmaps and inode table
badly on 64-bit systems, because the offset is computed as a
large positive number instead of being a negative numer (which
will not be printed at all):
Group 1: (Blocks 0x8000-0xffff) [INODE_UNINIT, ITABLE_ZEROED]
Block bitmap at 0x0102 (+4294934786), Inode bitmap at 0x0202 (+4294935042)
Inode table at 0x037e-0x03fa (+4294935422)
This commit prints out the relative offsets for flex_bg
groups as the offset within the reported group. This makes it
more clear where the metadata is located, rather than simply
printing some large negative number.
Group 1: (Blocks 0x8000-0xffff) [INODE_UNINIT, ITABLE_ZEROED]
Block bitmap at 0x0102 (bg #0 +258), Inode bitmap at 0x0202 (bg #0 +514)
Inode table at 0x037e-0x03fa (bg #0 +894)
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the user passes a file system type which is not defined in
mke2fs.conf (i.e., mke2fs -t xfs ...) change mke2fs so that it prints
a warning and aborts the run. (There is an exception for ext2, since
that file system does not need a special definition in the fs_types
section of the /etc/mke2fs.conf file.)
In addition, print a warning if there are usage types (specified using
the -T option) which are not defined in /etc/mke2fs.conf.
Addresses-Debian-Bug: #594609
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The dependency definitions for DEPSTATIC_LIBBLKID and
DEPPROFILED_LIBBLKID incorrectly referenced the non-dependency macros
(i.e., STATIC_LIBUUID instead of DEPSTATIC_LIBUUID). This resulted in
-luuid showing up as a Makefile dependency, which is of course wrong.
Addresses-Debian-Bug: #604629
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes two possible causes for the error message:
WARNING: PROGRAMMING BUG IN E2FSCK!
OR SOME BONEHEAD (YOU) IS CHECKING A MOUNTED (LIVE) FILESYSTEM.
inode_link_info[X] is Y, inode.i_links_count is Z. They should be the same!
One cause which can trigger this message is when an inode has an
illegal link count > 65500 --- for example, 65535. This was the case
in the Debian Bug report #555456.
Another cause which could trigger this message is if an ext4 directory
previously had more than 65000 subdirectories (thus causing
i_link_count to be set to 1), but then some of the subdirectories were
deleted, such that i_link_count should now be the actual number of
subdirectories.
Addresses-Debian-Bug: #555456
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Clarify the e2fsck.conf(5) man page to make it clear that it applies
for ext4 file systems.
Addresses-Debian-Bug: #591083
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allow to specify discard in mke2fs.conf. Also change the way how to
specify default value for lazy_itable_init. It is better to have all
this defaulting done in the same place so do it in definition (as we do
with discard).
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It would be nice to have consistent "discard" options in every system
tool (mount, fsck, mkfs) taking advantage of discards. Also "discard"
and "nodiscard" is more descriptive instead of just "-K" and can be
easily defaulted and it is something we can not do with "-K".
With this commit you need to specify extended option like this:
./mke2fs -T <fstype> -E nodiscard <device>
in order make a filesystem without discarding the device first. And
./mke2fs -T <fstype> -E discard <device>
respectively.
-K option is with this commit deprecated and should not be used anymore.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If MKE2FS_DEVICE_SECTSIZE is set, then this will override the logical
sector size, which is the smallest sector size that can be written
atomically by the device. (Previously MKE2FS_DEVICE_SECTSIZE set the
physical sector size, which was incorrect given its historical usage.)
The environment variable MKE2FS_DEVICE_PHYS_SECTSIZE will set the
physical sector size, which is the actual sector size used by the
device in reality.
The logical sector size is always less than or equal to the physical
sector size; and writes smaller than the physical sector size but
greather than or equal to the logical sector size will cause a
read-modify-write cycle within the device firmware (or in some
abstract layer lower than the Linux block I/O subsystem, at any rate).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the device does not have an explicitly specified minimum io_size or
optimal io_size, and the physical sector size is greater than the
block size, then use the physical sector size as a better-than-nothing
hint.
This should help for SSD's that have a physical sector size of 8k or
16k (which are reportedly will be coming soon).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There will be SSD's out soon that have 8k or 16k phyiscal block sizes.
So don't enforce a requirement that the block size be less than the
physical block size unless the force option is given, and don't give a
warning if the user can't do anything about it (i.e., if the physical
block size is > than the page size).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add check for /sys/fs/ext4/features/lazy_itable_init. If this file
exists, it should be OK to skip initializing the inode table since the
kernel will do it at mount time.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This prevents accidentally replaying and resetting the journal while
it is mounted, due to an accidental attempt to run e2fsck on an LVM
snapshot of a file system with an external journal.
Addresses-Debian-Bug: #587531
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The development branch of e2fsprogs already has a code point assigned
in conflict with EXT2_FLAG_DIRECT_IO. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use "[u]" instead of "[uninit]" and limit the amount of detail printed
for the extent tree blocks, so it is more similar to the format used
for direct/indirect mapped inodes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allocate various memory structures to be properly aligned to avoid
needing to use a bounce buffer when doing direct I/O read/writes.
This should also help on FreeBSD systems which require aligned buffers
unconditionally.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds the basic support for Direct I/O to unix_io.c, and adds a
new flag EXT_FLAG_DIRECT_IO which can be passed to ext2fs_open() or
ext2fs_open2() to request Direct I/O support.
Note that device mapper devices in Linux don't support Direct I/O, and
in some circumstances using Direct I/O can actually make performance
*worse*!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mistakes on the commandline can lead to odd error messages:
# mke2fs -t ext4 -E stride=128 stripe-width=512 /dev/sda1
mke2fs: invalid blocks count - /dev/sda1
Making it a bit more explicit is more obvious:
mke2fs: invalid blocks count '/dev/sda1' on device 'stripe-width=512'
(hint, the mistake was no comma separation for -E)
Reported-by: Adam Huffman <bloch@verdurin.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a device supports discard -and- returns 0s for discarded blocks,
then we can skip the inode table initialization -and- the inode table
zeroing at mkfs time, and skip the lazy init as well since they are
already zeroed out.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a device name is misspelled, we output the full text about specifying
alternate superblock. This is slightly misleading because when the device
cannot be open because of ENOENT, this certainly won't help. So just print
that device does not exist and exit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This bit of the mke2fs manpage is slightly confusing:
-b block-size
Specify the size of blocks in bytes. <snip>
If block-size is negative, then mke2fs will use heuristics
to determine the appropriate block size, with the constraint
that the block size will be at least block-size bytes.
because it sounds like the block size will be at least a negative
number. Clarify just what the negative sign means.
Reported-by: Chris Frost <chris@frostnet.net>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Requiring an immediate pre-fsck before printing a minimum
resize size seems a bit draconian; if the fs isn't clean or marked
with error, then certainly, but for an informational minimum
size, I don't think we need to require a fsck since last mount.
I had simply copied the checks from the actual resize path,
previously.
Installers use this option (-P) to gather minimum resize info,
and requiring an actual fsck before use just seems to go too far.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 641b66b fixed a floating point precision error which can result
in a search algorithm looping forever. It can also result in an array
index being out of bounds and causing a segfault. Here are two more
cases in e2fsck and resize2fs that need to be fixed. I've just used
the same fix from the that commit.
Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where the original superblock and the backup superblock
are both invalid in some way, e2fsck will try to go back to the
orignal superblock. To do that, it must close the attempted open
using the backup superblock first (since otherwise the exclusive open
will prevent the subsequent open from succeding).
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The getopt() function returns an int, not a char. On systems where the
default char is unsigned (like ppc), we get weird behavior where -1 is
truncated to 0xff but compared to (int)-1.
Also fix this same bug for two test programs, test_rel and iscan,
which aren't currently used at the moment.
Addresses-Gentoo-Bug: #299386
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The test now checks to make sure the superblock fields are correctly
aligned and prints them out so they can be manually checked to make
sure they are where we expect them to be.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add superblock fields which track where and when the first and most
recent file system errors occured. These fields are displayed by
dumpe2fs and cleared by e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We also support for byte-swapping the Next3 fields, although the
current Next3 implementation doesn't support big-endian systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>