The single quote character must not be in the first character in a
line, or else it can get mistaken as a macro call.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the mke2fs.conf configuration option which causes the hugefiles to
be aligned to the beginning of the disk. This is important if the the
reason for aligning the hugefiles is to support hard-drive specific
features such as Shingled Magnetic Recording (SMR).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We can set flex_bg count only up to 2^30 with profile
because get_int_from_profile can handle it to 2^31-1.
Add get_uint_from_profile to read unsigned int value
so that mke2fs with profile can handle up to 2^31 flex_bg same as -G option.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mke2fs -G option allows root user to set flex_bg count (power of 2).
However ext4 has bad metadata layout if we specify more than or equal to
2^32 to mke2fs -G, because of the 32bit shift operation
in ext2fs_allocate_group_table().
And the maximum block group count of ext4 is 2^32 -1 (ext4_group_t
s_groups_count), so diallow more than 2^32 flex_bg count.
Steps to reproduce:
# mke2fs -t ext4 -G 4294967296 DEV
# dumpe2fs DEV
...
Flex block group size: 1 <----- flex_bg is 1!
...
Group 0: (Blocks 0-32767)
Checksum 0x4afd, unused inodes 7541
Primary superblock at 0, Group descriptors at 1-1
Reserved GDT blocks at 2-59
Block bitmap at 60 (+60), Inode bitmap at 61 (+61)
Inode table at 62-533 (+62)
32228 free blocks, 7541 free inodes, 2 directories, 7541 unused inodes
Free blocks: 540-32767
Free inodes: 12-7552
Group 1: (Blocks 32768-65535) [INODE_UNINIT]
Checksum 0xc890, unused inodes 7552
Backup superblock at 32768, Group descriptors at 32769-32769
Reserved GDT blocks at 32770-32827
Block bitmap at 32828 (+60), Inode bitmap at 32829 (+61)
Inode table at 32830-33301 (+62)
32234 free blocks, 7552 free inodes, 0 directories, 7552 unused inodes
Free blocks: 33302-65535
Free inodes: 7553-15104
...
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <darrick.wong@oracle.com>
Currently is used did not specified lazy_itable_init option we rely on
information from ext4 module exported via sysfs interface. However if
the ext4 module is not loaded it will not be enabled even though kernel
might support it.
With this commit we set the default according to the kernel version,
however we still allow it to be set manually via extended option or be
enabled in case that ext4 module advertise that it supports this
feature.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Currently there are many uses of ext2fs_close() which might be wrong.
First of all ext2fs_close() does not set the ext2_filsys pointer to NULL
so the caller is responsible for clearing it, however there are some
cases there we do not do it.
Second of all very small number of users of ext2fs_close() actually
check the return value. If there is a problem in ext2fs_close() it will
not even free the ext2_filsys structure, but majority of users expect it
to do so.
To fix both problems this commit introduces a new helper
ext2fs_close_free() which will not only check for the return value and
free the ext2_filsys structure if the call to ext2fs_close2() failed,
but it will also set the ext2_filsys pointer to NULL.
Replace every use of ext2fs_close() in e2fsprogs tools with
ext2fs_close_free() - there is no real reason to keep using
ext2fs_close().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
This is a straight cut and paste from the util-linux
mount manpage to ext4.5 (with commented-out lines
removed).
It's pretty much impossible for util-linux to keep up
with every filesystem out there, and Karel has more than
once expressed a wish that mount options move into fs-specific
manpages.
So, here we go.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The chattr(1) manpage and chattr usage() output were missing some flags.
Add those, and make some other minor cosmetic fixes.
(I've left out the 'B' (EXT2_COMPRBLK_FL) flag, because
it's not actually used anywhere, and I can't figure out
how it differs from 'c' (EXT2_COMPR_FL))
Also, because the matrix of filesystems & flags is quite large,
refer to filesystem-specific manpages for detailed discussion
of flags supported by those filesystems, rather than trying to
cover it all in this manpage. I'll send those manpage
updates to the appropriate lists a bit later.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
The flags described in chattr usage() and the chattr(1) manpage
were in semi-random order, which makes it hard to ascertain
which flags might be missing or undocumented, and to locate
flags within the manpage.
Re-order the list of flags in alphanumeric order, and do
the same for the flag descriptions in the body of the manpage.
There should be no content changes here, just reordering
for consistency.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
It's a bit strange to accept revision levels higher than
the code creating the filesystem can understand, so don't
allow it.
At least the kernel will mount the fs readonly if it's too
high, but no other utility will touch it, so you can't
fix the error.
Just reject anything > EXT2_MAX_SUPP_REV at mkfs time.
Signed-off-by: Frank Sorenson <fsorenso@redhat.com>
[sandeen@redhat.com: Add more verbose commit log]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Quiet a couple of build warnings in tst_libext2fs.c
Add missing unistd.h header for misc/util.c.
Ignore generated files for lib/ext2fs/tst_libext2fs and intl/ files.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
29758d2 filefrag: exit with error code if an error is hit
introduced a couple errors; in one case it missed returning
a value, and possibly picked up errno from (unchecked) close(),
and in the other used a test where it needed an
assignment. So capture the error, move perror() directly
after the failed call in both cases, and fix the assignment.
Also fix a precedence problem with:
if (fe_flags & mask == 0)
which is equivalent to:
if (fe_flags & (mask == 0))
but we need:
if ((fe_flags & mask) == 0)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fix compile warnings found on the master branch when using LLVM.
- Add missing format string when using the libintl _() macro
- include <limits.h> header to get PATH_MAX definition
- fix format vs. variable mismatches
- add header block for create_inode.c file
- remove use of bzero(), use ext2fs_get_memzero() instead
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix various small resource leaks and error code handling issues that
Coverity pointed out.
Fixes-Coverity-Bugs: 1215250, 1193379, 119194[2-4], 1049160
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If an error is hit during filefrag operation, it will continue to run
(if multiple files are specified on the command-line), but will exit
with a non-zero value, so that callers can determine that some error
was hit.
Clean up the printing of FIEMAP flags and print some newer flags that
were missing. Also print unknown flags as hex values.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix name clash in do_mknod_internal() due to local variables named
"major" and "minor" shadowing identical macro names.
Also, no need to set the major and minor device for a FIFO inode.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
The commit:
802146c mke2fs: create a regular file if necessary
caused a regression on 32-bit machines; the open() fails if
the file size is > 4G.
Using ext2fs_open_file() fixes it.
Addresses-Red-Hat-Bugzilla: #1099892
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we're creating a fs with metadata blocks packed at the beginning
(packed_meta_blocks=1 in mke2fs.conf), set the group descriptor
checksum or else we create DOA filesystems with checksum errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
We no longer need to reference https://ext4.wiki.kernel.org/index.php/Quota
since we've fixed the nasty bugs associated with e2fsck and the quota
feature. The wiki page will be updated once we've done a release that
includes these fixes indicated the verison which these problems have
been fixed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Aditya Kali <adityakali@google.com>
There are interfaces that are used by mke2fs.c and tune2fs.c which are
in quotaio.h, and some future changes will be much simpler if we can
combine the two header files together. Also the guard #ifdef for
mkquota.h was incorrect, which caused problems when both header files
needed to be included.
Also remove quota.pc and installation rules for libquota, since this
library is never going to be something that we can export externally
anyway. Eventually we'll want to clean up the interfaces and move the
external publishable interfaces to the libext2fs library, and then
rename what's left from libquota.a to libsupport.a for internal use
only.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Aditya Kali <adityakali@google.com>
The combination of 128-byte inodes and inline_data is silly, since
there's no room in the inode table. Unfortunately, if neither
mke2fs.conf nor the mkfs command line options specify an inode size,
the default inode size is set to 128 bytes (by libext2fs) and the
warning isn't printed. Therefore, always do the check-and-warning.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since the code to copy-in a socket when creating a filesystem is
fairly simple, just do it here.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix various small resource leaks and error code handling issues that
Coverity pointed out.
Fixes-Coverity-Bugs: 11919{39-45}, 1174118, 1049160, 1049144
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix some minor bugs relating to passing CFLAGS to cppcheck, and
package the cppcheck output into nicer looking reports.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This supercedes the "whole disk" check, since it does a better job and
there are times when it is quite legitimate to want to use the whole
disk.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The basic idea is to provide a bit more context in this situation:
% ./misc/mke2fs -t ext4 /dev/sdc3
mke2fs 1.42.9 (4-Feb-2014)
/dev/sdc3 contains a ext4 file system
Proceed anyway? (y,n)
... by adding this bit of context:
% ./misc/mke2fs -t ext4 /dev/sdc3
mke2fs 1.42.9 (4-Feb-2014)
/dev/sdc3 contains a ext4 file system
last mounted on /SOX-backups on Mon May 5 08:59:53 2014
Proceed anyway? (y,n)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We've added the ability to automatically recreate a file if it doesn't
exist prior to creating the file system, since this is often used (for
example) when managing file system images for use in virtual machines.
We should at least notify the user that this is going on to avoid
surprises in the case of misspelled device/file names.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Filefrag doesn't catch and print the shared extent flag. Add this for
users of filefrag on file systems with shared extents (such as btrfs).
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Warn the system administrator if there is an existing file system on
the block device, and give the administrator an opportunity to abort
the mkfs operation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If mke2fs needs to ask the user for permission, and the user doesn't
type anything the specified delay in the /etc/mke2fs.conf file,
proceed as if the user had said yes. The default is to do what we
currently do, which is to wait until the user answers the question one
way or the other.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't ask the user if it's OK that a regular file is smaller than the
requested size. This test only makes sense if we are creating the
file system on a block device. This allow users to not need to
manually answer the "proceed?" question when creating a file system
backed by a simple file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the call to proceed_question() from check_plausibility() to its
caller. This allows more fine grained control by mke2fs about when it
might want to call check_plausibility().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Very often people are creating file systems using regular files, so we
shouldn't ask the user to confirm using the proceed question.
Otherwise it encourages users to use the -F flag, which is a bad
thing.
We do need to continue to check if the external journal device is a
block device.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix various unused variable and use-uninitialized warnings.
Add generated files into .gitignore.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need return retval when "mke2fs -d" failed, otherwise the "$?"
would be 0 which is misleading.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
This allows e4defrag to work with 64-bit and bigalloc file systems.
Signed-off-by: Jon Ernst <jonernst07@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When calling populate_fs, the map for hardlink detection is not
cleaned up between populate_fs invocations, which could lead to
unexpected results if anyone calls populate_fs twice in the same
client program). This doesn't happen right now, but we might as well
clean it up.
The detctor fails if the external directory crosses mountpoints,
so fix that too.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since create_inode.c is shared between debugfs and mke2fs, don't
spread debugfs internal state into mke2fs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a couple of small style issues in the create_inode files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
do_write_internal returns errno when ext2 library calls fail; since
errno only reflects the outcome of the last C library call, this will
result in confused callers. Eliminate the naked return since
this results in an undefined return value.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Update the manual for the -d option
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create the inode and save the native inode number when we meet the hard
link (st_nlink > 1) at the first time, use ext2fs_link() to link the
name to the target inode number when we meet the same native inode
number again.
This algorithm is referred this from the genext2fs.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This option is used for adding the files from a given directory (the
root-directory) to the filesystem, it is similiar to genext2fs, but
genext2fs doesn't fully support ext4.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Set the uid, gid, mode and time for inode.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The do_mkdir_internal() is used for making dir on the target fs, most of
the code are from debugfs/debugfs.c, the debugfs/debugfs.c will be
modified to use this function.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The do_write_internal() is used for copying file from native fs to
target, most of the code are from debugfs/debugfs.c, the
debugfs/debugfs.c will be modified to use this function.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The do_symlink_internal() is used for creating symlinks, most of the
code are from debugfs/debugfs.c, the debugfs/debugfs.c will be modified
to use this function.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The do_mknod_internal() is used for creating special file which is
block, character and fifo, most of the code are from debugfs/debugfs.c,
the debugfs/debugfs.c will be modified to use this function.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use opendir() and readdir() to read the native directory, then use
lstat() to identify the file type and call the corresponding function to
add the file to the filesystem, call the populate_fs() recursively if it
is a directory.
NOTE: the libext2fs can't create the socket file.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We will add a -d option which will be used for adding the files from a
given directory to the filesystem, it is similiar to genext2fs, but
genext2fs doesn't fully support ext4.
* We already have the basic operations in debugfs:
- Copy regular file
- Create directory
- Create symlink
- Create special file
We will move these operations into create_inode.h and create_inode.c,
then let both mke2fs and debugfs use them.
* What we need to do are:
- Copy the given directory recursively, this will be done by the
populate_fs()
- Set the owner, mode and other informations
- Handle the hard links
TODO:
- The libext2fs can't create the socket file (S_IFSOCK), do we have a
plan to support it ?
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since auto_64-bit_support is on by default, resize_inode feature will
be disabled when creating a >16T ext4 according to mke2fs.conf(5).
This should also be done when making ext4 with "-O 64bit" to enable
64bit feature explicitly. Otherwise online resize to enlarge a
over-16T fs to larger would fail.
[root@localhost resize]# truncate -s 50t fs.img
[root@localhost resize]# losetup /dev/loop0 fs.img
[root@localhost resize]# mkfs -t ext4 -O 64bit /dev/loop0 30t
[root@localhost resize]# mount /dev/loop0 mnt
[root@localhost resize]# resize2fs /dev/loop0
resize2fs 1.42.7 (21-Jan-2013)
Filesystem at /dev/loop0 is mounted on /root/resize/mnt; on-line resizing required
old_desc_blocks = 3840, new_desc_blocks = 6400
resize2fs: Invalid argument While checking for on-line resizing support
And dmesg shows
[688378.442623] EXT4-fs (loop0): resizing filesystem from 6710886400 to 13421772800 blocks
[688378.443216] EXT4-fs warning (device loop0): verify_reserved_gdb:700: reserved GDT 3201 missing grp 177147 (5804756097)
[688378.443222] EXT4-fs (loop0): resized filesystem to 8858370048
[688378.528451] EXT4-fs warning (device loop0): ext4_group_extend:1710: can't shrink FS - resize aborted
With this fix resize2fs could do the online enlarge correctly.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now inline_data doesn't depend on ext_attr. Hence we don't need to do
this sanity check. But if the inode size is too small (128 bytes),
inline_data will be useless because we couldn't save data in ibody
extented attribute. So we need to report this error.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After applied this commit (a7f4c635), we have banned to traverse blocks
for an inode which has inline data because no block belongs to it. But
before calling this function, we need to check inline data flag. This
commit add a sanity check ext2fs_inode_has_valid_blocks2() to fix them
except that ext2fs_expand_dir because it will be fixed by another patch.
Meanwhile in this commit it fixes a bug that when we kill a file we
could leak an inode.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
To check the coverage of e2fsprogs's regression test, do the
following:
configure --enable-gcov
make -j8 ; make -j8 check ; make coverage.txt
The coverage information will be the coverage.txt and *.gcov files in
the build directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Jim pointed out that "tune2fs -f -O ^has_journal" won't remove the
journal if the needs_recovery flag is set; the manpage seems to indicate
that it should. And if you've lost an external journal and can no longer
replay it, how should one proceed?
Change tune2fs so that two "-f" options will allow removal of a dirty
journal from a filesystem, even if the filesystem needs recovery.
e2fsck can then do its best to pick up the pieces.
Addresses-Debian-Bug: #559301
Reported-by: Jim Faulkner <james.faulkner@yale.edu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The locally defined versions of both sync_file_range and fallocate are broken
on 32bit systems. On these systems two 32bit registers are needed for each
64bit parameter. Also, sync_file_range on MIPS32 needs a dummy parameters
after the fd parameter. Just leave all these subtleties to the C library.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a number of non-literal string format warnings from LLVM due
to the use of _() that were not fixed in commit 45ff69ffeb.
Fix mismatched int vs. __u64 format warnings in blkmap64_rb.c.
There were also some comparisons of __u64 start or count <= 0.
Change them to be comparisons == 0, or start + count overflow.
Fix operator precedence warning for (value & (value - 1) != 0)
introduced in 11d1116a7c. It seems "&" is lower precedence
than "!=", so the above didn't fail for power-of-two values,
but only odd values. Fortunately, either s_desc_size nor
s_inode_size is valid if odd.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext4 file system also supports to set/clear 'j' attribute, but it just
say that this option is only useful for ext3 in manpage. This commit
fixes it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Refactor the running kernel version checks to hide the details of
version code checking, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When meta_bg feature is enabled, group descriptor block is allocated
every 128 block group (or every 64 block group if 64bit feature is
enabled).
In such situation, files in block group more than #128 will be removed
if sparse_super feature is enabled with tune2fs and afterwards
necessary e2fsck running.
Because tune2fs does not reallocate group descriptor blocks but just
set sparse_super feature. If ext4 has sparse_super,
ext2fs_descriptor_block_loc2() called by e2fsck thinks the block group
(e.g. #128) that it has group descriptor block at the head offset. But
that offset is used as backup super block before. So e2fsck fixes
ext4 based on invalid group descriptor blocks and this cause data
lost.
The patch avoids this problem simply by disallow tune2fs enabling
sparse_super if meta_bg is enabled.
Steps to reproduce:
1. Create ext4 which has meta_bg, ^sparse_super and 129+ block groups.
# mke2fs -t ext4 -O meta_bg,^resize_inode,^sparse_super DEV 17G
# mount DEV /MP
2. Create direcotry and files which use block group #128's metadata.
# echo $((8192*128+1)) > /sys/fs/ext4/DEV/inode_goal
# mkdir /MP/DIR
# for i in $(seq 1 100); do dd if=/dev/urandom of=/MP/DIR/file$i bs=1024 count=10; done
3. Enable sparse_super with tune2fs then execute e2fsck.
Data in block group #128 will be lost!!
# umount DEV
# tune2fs -O sparse_super DEV
# e2fsck/e2fsck -yf DEV
Signed-off-by: Akira Fujita <a-fujita@rs.jp.ne.cocm>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Interpret "zero_hugefiles" relation in mke2fs.conf as a boolean value,
as documented in the man page.
If the hugefile is larger than 2GB, set the large_file file system
feature so e2fsck doesn't complain.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The getopt() function will never let optarg be NULL (at least without
using the GNU double-colon extension, which we don't use because it's
not portable), so don't bother checking for that case. It's harmless,
but it triggers a Coverity warning elsewhere, since it thinks optarg
could in fact be NULL.
Addresses-Coverity-Id: #1049156
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the extended options packed_meta_blocks and journal_location_front
which causes mke2fs to place the metadata blocks at the beginning of
the file system.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In practice, it is **extremely** rare for users to try to use more
than the first backup superblock located at the beginning of block
group #1. (i.e., at block number 32768 for file systems with a 4k
block size). This new compat feature restricts the backup superblock
to block group #1 and the last block group in the file system.
Aside from reducing the overhead of the file system by a small number
of blocks, by eliminating the rest of the backup superblocks, it
allows us to have a much more flexible metadata layout. For example,
we can force all of the allocation bitmaps and inode table blocks to
the beginning of the disk, which allows most of the disk to be
exclusively used for contiguous data blocks.
This simplifies taking advantage of certain HDD specific features,
such as Shingled Magnetic Recording (aka Shingled Drives), and the
TCG's OPAL Storage Specification where having a simple mapping between
LBA block ranges and the data blocks used by the file system can make
life much simpler.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of iterating over the allocation bitmap using
ext2fs_test_block_bitmap2(), bit by bit, use
ext2fs_find_first_set_block_bitmap2() instead.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Newer versions of autoconf pull in AC_PROG_GCC as part of
AC_CANONICAL_HOST. So we need check for WITH_DIET_LIBC earlier in
configure.in.
Also, e2fsprogs now needs functions which are found in diet libc's
compat library. So add support for autoconf's LIBS function, and
automatically set libs to include -lcompat.
Finally, disable compiling e4defrag by deault if --with-diet-libc is
specified because the program has too many glibc dependencies.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use posix_fadvise64() when available. This allows 64bit offsets on
32bit systems.
[ Modified by tytso to try to use fadvise64() as well, and to remove
the attempt to call the syscall directly, since because and
complexities caused by required dummy arguments on some
architectures, it's not worth the hair. ]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It's highly unlikely after five seconds that zero blocks would have
been written, but let's silence the Coverity warning.
Addresses-Coverity-ID: 1147780
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Dividing a floating point number by zero is undefined in C. It
happens to work with gcc/glibc, but it's not something that's
guaranteed.
Addresses-Coverity-ID: #1147781
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
An integer overflow could happen if the file system is large and has
very large contiguous chunks of free space.
Addresses-Debian-Bug: #718205
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This allows "e2image -rp /dev/sdc1 - | bzip2 > sdc1.img.bz2" to work
correctly, so the progress information doesn't corrupt the image being
sent to stdout.
Also add a diagnostic indicating that the -p option is currently only
implemented for raw mode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The old progress reporting code would crash on small file systems.
For example:
cp /dev/null /tmp/foo.img
mke2fs -t ext4 -F /tmp/foo.img 100
e2image -o 0 -O 4096 -rap /tmp/foo.img
Fix this, and while we're at it, factor out the code to make it easier
to read and maintain.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If dumpe2fs tries to print journal info when using an image file
created using e2image, it will crash since the journal isn't
available. So don't even try to print it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2image progam was originally intended to create image files.
However, some people have started using e2image to copy a file system
from one block device to another, since it is more efficient than
using dd because it only copies the blocks which are in use. If we
are doing this, however, we must not skip writing blocks which are all
zero in the source device, since they may not be zero in the
destination device.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Phillip Susi <psusi@ubuntu.com>
Refactor calls to ext2fs_llseek(). This makes the code more compact,
easier to read, and it also fixes a number of places where we call
ext2fs_llseek() without doing proper error checking.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When doing an in place move, interrupting it past the
point of no return will destroy the filesystem since
parts of it have been overwritten. Catch SIGINT the
first time and issue a warning if this is the case.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When given the -p switch, print progress information, including
block counts, percentage complete, estimated time remaining, and
throughput.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If given at least one offset and only one file, assume source
and dest are the same, and do an in place move.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add -o and -O switches to specify the offset where the source
and destination filesystems start. This is useful if you have
an image of a partitioned disk or wish to create one.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The mke2fs(8) man page was updated in 4727c67dc2, but needs some
more clear descriptions for extra_isize and metadta_csum features.
The uninit_bg feature is supported by all ext4-capable kernels,
and does have a slow e2fsck pass for newly-formatted filesystems,
so remove the caveat.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The s_desc_size in the superblock specifies the group descriptor
size in bytes, but in various places the EXT4_FEATURE_INCOMPAT_64BIT
flag implies that the descriptor size is EXT2_MIN_DESC_SIZE_64BIT
(64 bytes) instead of checking the actual size. In other places,
the s_desc_size field is used without checking for INCOMPAT_64BIT.
In the case of ext2fs_group_desc() the s_desc_size was being ignored,
and assumed to be sizeof(struct ext4_group_desc), which would result
in garbage for any but the first group descriptor. Similarly, in
ext2fs_group_desc_csum() and print_csum() they assumed that the
maximum group descriptor size was sizeof(struct ext4_group_desc).
Fix these functions to use the actual superblock s_desc_size if
INCOMPAT_64BIT.
Conversely, in ext2fs_swap_group_desc2() s_desc_size was used
without checking for INCOMPAT_64BIT being set.
The e2fsprogs behaviour is different than that of the kernel,
which always checks INCOMPAT_64BIT, and only uses s_desc_size to
determine the offset of group descriptors and what range of bytes
to checksum.
Allow specifying the s_desc_size field at mke2fs time with the
"-E desc_size=NNN" option. Allow a power-of-two s_desc_size
value up to s_blocksize if INCOMPAT_64BIT is specified. This
is not expected to be used by regular users at this time, so it
is not currently documented in the mke2fs usage or man page.
Add m_desc_size_128, f_desc_size_128, and f_desc_bad test cases to
verify mke2fs and e2fsck handling of larger group descriptor sizes.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mostly by adding static and removing excess extern qualifiers. Also
convert a few remaining non-ANSI function declarations to ANSI.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I've added documentation for all available filesystem features
settable by mke2fs.
* Features now include the kernel constant attached to the function.
* Some pre-existing feature explanations have been expanded based on
ext4.wiki.kernel.org.
[ Edited by tytso for stylistic and correctness. ]
Addresses-Debian-Bug: #586218
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
According to mke2fs man, we can create a filesystem on the mounted
device when -FF option is specified.
However, currently we have to specify -F option third to force mke2fs.
This patch fixes the problem.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Include ext2fsP.h in fileio.c for ext2fs_file_block_offset_too_big()
declaration. Fix up the declaration to mark it extern in the header.
Include <strings.h> header for strcasecmp() in tune2fs.c if available,
as described in the strcasecmp(3) man page, instead of doing this
indirectly by declaring _BSD_SOURCE and getting it from <string.h>.
If CONFIG_QUOTA is undefined, parse_quota_opts() is unused in
tune2fs.c so #ifdef it out.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Compiling with LLVM generates a large number of warnings due
to the use of _() for wrapping strings for i18n:
warning: format string is not a string literal
(potentially insecure) [-Wformat-security]
./nls-enable.h:4:14: note: expanded from macro '_'
#define _(a) (gettext (a))
^~~~~~~~~~~~
These warnings are fixed by using "%s" as the format string,
and then _() is used as the string argument.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't print a verbose configure error in parse-types.h if
<asm/types.h> missing and __[SU]*_TYPEDEF is unset. This is
always the case for non-Linux builds.
The printf formatting strings all use "%llu" for printing 64-bit
values and this it produces a large number of warnings if __u64
is defined as "unsigned long". If __U64_TYPEDEF isn't set use
"unsigned long long" for __u64 in ext2-types.h and blkid-types.h
by default instead of using "unsigned long".
Fix a few places where "%d" or "%u" or "%Lu" were used to print a
64-bit value, by converting them to use "%lld" or "%llu" instead.
Fix a few places where "%lu" was used to print .tv_usec, by casting
the variable to "(long)" since .tv_usec is "int" on some systems.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The old uninit_bg checksums depend on the UUID, so prohibit changes to
the UUID if a checksumming filesystem is mounted, because this
introduces a nasty race where the kernel and tune2fs are both trying
to rewrite group descriptors at the same time, with different ideas
about what the UUID is.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
metadata_csum implies uninit_bg, and in fact forces the bit off for
rocompat with older implementations. Therefore, to detect the
presence of checksums, we should use the predicate function to decide
if group descriptor checksums are turned on, not open-coded flag
tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o
Vitaliy Filippov