Add an explanation of exactly what ext2fs_super_and_bgd_loc() and
ext2fs_reserve_super_and_bgd_loc() do, and more importantly, exactly
what they return. Note that most callers should *not* rely on the
return value since it's rarely useful, especially once the flex_bg
feature is enabled and inode table and allocation bitmap blocks may
not be in the block group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function tried to set BLOCK_UNINIT based on the return value of
ext2fs_super_and_bgd_loc. That's not something that works once we
start allowing flex_bg since the block group metadata might not be
located in the blockgroup itself.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It used to be the case that ext2fs_set_gdt_csum set the ITABLE_ZEROED
flag if the INODE_UNINIT is not set. This assumed that the only
caller of ext2fs_set_gdt_csum was e2fsck (which was not true), and
that e2fsck would take care of zeroing the inode table (whic was also
not true).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make dumpe2fs and debugfs print out the s_min_extra_isize and
s_wanted_extra_isize fields from the superblock.
Update tests expect files as appropriate.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Set the s_min_extra_isize and s_wanted_extra_isize superblock fields
to reasonable defaults in ext2fs_initialize().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
mkswap followed by pvcreate on a block device
will still turn up as "swap" in blkid, because
pvcreate isn't particularly careful about zeroing
old signatures. (neither is mkswap, for that matter).
Testing for appropriate version and page counts
gives us a bit more confidence that we have a
real swap (v1) partition.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This was the original name used by Lustre's patches; keep the plural
when converting feature names to a feature mask for compatibility's
sake.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allow the old name of uninit_groups when converting feature names for
backwards compatibility for scripts running mke2fs and tune2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make sure that extent_goto() leaves us at the last extent
prior to the requested logical block, if the logical block
requested lands in a hole.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_extent_insert() only did a memmove if path->left
was > 0, but if we are at the last extent in the node,
path->left == 0, and this node must be moved before the
current extent is replaced with the newly inserted node.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
$(LIBSS) should automatically include @DLOPEN_LIB@ so the right thing
happens for programs that need to use the ss library.
Reorder the library link order for tst_extents since the blkid library
uses libuuid functions.
Thanks to Eric Sandeen for pointing this problem out!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fedora seems to be gearing up to add
-Werror-implicit-function-declaration
to the standard build flags, so I thought I'd get out ahead
of this one...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Thanks to Max Lindner (lokimuh) for pointing this out.
I'm playing around a bit with ext2 and multi-user encryption and I
need space for my key management. So I set s_first_data_block to 4000
or something like that.
This way mke2fs segfaults when executing
ext2fs_create_resize_inode() because
blk_t goal = 3 + sb->s_reserved_gdt_blocks + fs->desc_blocks +
fs->inode_blocks_per_group;
will produce a integer underrun later and segfault then in the
ext2fs_test_bit assembler inline function.
when exchanging 3 with 2 + sb->s_first_data_block, mke2fs does not
segfault.
I'm not 100% sure if thats the correct way dealing with this issue
but I think its a proper solution.
Addresses-Sourceforge-Bug: #1935847
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some library makefiles use $(LIB)/$(LIBRARY).a as a dependency for the
static library built by the makefile fragment. Add it as a target
created when building $(LIBRARY).a so that it is rebuilt when necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the function signature so that ext2fs_set_gdt_csum() returns an
error code.
If the inode bitmap hasn't been loaded return EXT2_ET_NO_INODE_BITMAP.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Never set the UNINIT_BLOCKS flag for the last group since the kernel
doesn't handle the case graefully if there is a full set of blocks in
each blockgroup marked UNINIT_BLOCKS. The kernel should be fixed up,
but in the meantime this avoids hitting the problem, and is more
consistent with lazy_bg not marking the last group UNINIT.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Only mark the superblock as dirty if the function actually managed to
change part of the block group descriptor.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_swap_inode_full() was incorrectly swapping the i_block array
for extents.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_extent_get() function was not OR-ing together UNINIT
and LEAF flags in the case where an extent was both; so if we
had an extent which was both uniint and leaf, pass1 would bail
out where depth == max_depth but was not marked as leaf, and
e2fsck (from the next branch) would abort with:
e2fsck 1.40.8 (13-Mar-2008)
Pass 1: Checking inodes, blocks, and sizes
Error1: No 'down' extent
Aborted
Also, if the error is encountered again, print the inode number
to aid debugging until it's properly handled, at least.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This name is a more intuitive option when running mke2fs.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- Add support for computing CRC-16 value.
- Add call to check/verify/set csum on block_groups.
- Add a test program to verify csum operations.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch includes the changes required to e2fsck to understand the
nlink count changes made in the kernel.
In e2fsck pass 4, when we fetch the actual link count, if it is
exceeds 65,000 we set the link count to 1. We silently fix the
situation where the nlink count of the directory is 1, and there are
fewer than 65,000 subdirectories, since since that can happen
naturally.
Patch originally from CFS, significantly rewritten by Theodore Ts'o.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In order to more accurately count the number of directories, which
with the DIR_NLINKS feature can now be greater than 65,000, change
icount to use a 32-bit counter. This doesn't cost us anything extra
when the icount data structures are stored in memory, since due to
padding for alignment reasons.
If the actual count is greater than 65,500, we return 65,500. This is
because e2fsck doesn't actually need to know the exact count; it only
needs to know if the number of subdirectories is greater than 65,000.
In the future if someone really needs to know the exact number, we
could add a 32-bit interface. One isn't needed now, though.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
No application will ever use the ORPHAN_FS flag, since it only shows
up in kernel memory, but it's been pointed out it was first used in
ext3, and so it should be renamed for accuracy.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After the fix for resize2fs's inode mover losing in-inode
extended attributes, the regression test I wrote caught
that the attrs were still getting lost on powerpc.
Looks like the problem is that ext2fs_swap_inode_full()
isn't paying attention to whether or not the EA magic is
in hostorder, so it's not recognized (and not swapped)
on BE machines. Patch below seems to fix it.
Yay for regression tests. ;)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_extent_insert() was copying n-1 of the existing extents when
moving things down to make room for the new extent.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When deleting the last entry in a node, back up the current pointer so
it is always pointing at a valid entry.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add 64-bit block capable routines to inode IO manager. Since fileio.c
does not yet have 64bit support, these routines will not handle 64bit
block numbers correctly yet.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In order to provide 64-bit block support for IO managers an maintain
ABI compatibility with the old API, some new functions need to be
added to struct_io_manger. Luckily, strcut_io_manager has some
reserved space that we can use to add these new functions.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add two new functions which allows the caller to examine the last
directory block entry added to the list, and to drop if it necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a device mapper volume disappears while libblkid code is running,
it is possible for the devicemapper code to return errors, and since
libblkid wasn't checking for error returns, it would dereference a
null pointer and crash. Add error checking to prevent this.
Addresses-RedHat-Bugzilla: #433857
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a flag which returns the partially completed filesystem object so
e2fsck can print more intelligent error messages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o