Unfortunately, distributions like Ubuntu seem to have buggy init
scripts that run e2fsck and mount the root filesystem before making
sure the system time and time zone is correctly set. As a result, a
filesystem's last write and last mounted time can be set in future.
The buggy_init_scripts configuration option will stop e2fsck from
aborting the boot process, but it also inhibits the superblock times
from getting fixed. This causes resize2fs to refuse to resize the
filesystem, even after running e2fsck on the file system. To deal
with this, we need to fix the superblock write times unconditionally.
Addresses-Launchpad-bug: #373409
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext3 filesystems don't care if i_file_acl_hi is non-zero in some
inode, and newer kernels should ignore this field (although 2.6.29 and
older kernels will not). So e2fsck should fix this without aborting
an e2fsck preen operation.
Addresses-Debian-Bug: #526524
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cleanup whitespace in the problem.h and problem.c files. Removes a
bunch of places where tabs follow spaces, whitespace on empty lines, etc.
I didn't reformat the indenting of the entire problem.h error codes,
but there is some room for doing this...
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've hit a number of cases where the error codes in problem.h have
been assigned duplicate values compared to problems in our own e2fsck
patches, and this can lead to confusing and difficult to find bugs
in e2fsck (e.g. wrong problem messages, incorrect repair action, etc).
Attached is a test case for the problem.c file to ensure that the
problem table is sorted and does not contain any duplicate values.
Having the problem table sorted allows the correctness checking to be
very simple, and if it ever became important for performance we could
use binary searching of the problem table for the specific problem code.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The other problem codes associated with failing to create the
lost+found directory are non-fatal, and this one should be non-fatal
as well. The two places which call e2fsck_get_lost_and_found()
already deal with a failure to create the directory, so there's no
point making this be a fatal error.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4 filesystem uses journals too, so remove "ext3" from the
problem descriptions involving journals.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A corrupted interior node in an extent tree would cause e2fsck to
crash with the error message:
Error1: Corrupt extent header on inode 107192
Aborted (core dumped)
Handle this and related failures when scanning an inode's extent tree
more robustly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A few e2fsck problem messages supply their own prompt, and set a
prompt value of PROMPT_NULL. We have to check for this case, and not
pass the null string to _(), since that will result in the translation
header getting printed, like this:
Run journal anywayProject-Id-Version: e2fsprogs
Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>
POT-Creation-Date: 2008-02-28 21:45-0500
PO-Revision-Date: 2006-05-23 11:12+0000
Last-Translator: Somebody32 <som32@mail.ru>
Language-Team: Russian <ru@li.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 &&
n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;
X-Launchpad-Export-Date: 2008-05-28 00:43+0000
X-Generator: Launchpad (build Unknown)
<y>? yes
Addresses-Launchpad-Bug: #246892
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The rec_len field in the directory entry is 16 bits, so if the
filesystem is completely empty, rec_len of 0 is used to designate
65536, for the case where the directory entry takes the entire 64k
block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix error message to print the depth of a corrupt htree directory.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This makes it easier to locate the problem code in question.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The logical block numbers must be monotonically increasing, and there
must not be any overlapping extents. If any are found, report them as
filesystem corruption.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a check for the UNINIT_BLOCKS flag set in the last group. The kernel
patch doesn't handle this gracefully, because it assumes there are a full
set of blocks in each group marked UNINIT_BLOCKS. The kernel should be
fixed up, but in the meantime this avoids hitting the problem, and is
more consistent with lazy_bg not marking the last group UNINIT.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch has all the necesary pieces to open and fix filesystems created
with the uninit block group feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the prompt so it is clear to the user that e2fsck will be
clearing the htree information, not the directory inode itself, when
the htree information has proven to be corrupt.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Turns out a "should never happen" error can indeed happen very easily
if a directory with an htree index has an incorrect, and too-large,
i_size field. This patch fixes this so that we handle this situation
gracefully, allowing filesystems with this error to be fixed.
In another patch I will clean up the specific problem which caused the
internal "should never happen" error from happening at all, but patch
will prevent e2fsck from crashing, and prompt the user to remove the
htree index, so it can be rebuilt again after pass 3.
Thanks to Bas van Schaik at Tetra for giving me access to his system
so this problem could be debugged.
Addresses-Launchpad-Bug: #129395
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add vertificaton of the in-inode EA information, and allow in-inode
EA's to have a checksum.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If superblock mount time or last write time is in the future, and the
user refuses to fix the problem, don't mark the filesystem as being
invalid and needing to be checked.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Turkish translation has a bug in it where it has the translation
of "E@e '%Dn' in %p (%i)" to "E@E". This causes @E to be expanded at
@E, recursively, forever, until the stack fills up e2fsck core dumps.
Fix it by stopping after a recursive depth of 10, which is far more
than we need.
Addresses-Sourceforge-Bug: 1646081
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the journal had been removed because it was corrupt, the
E2F_FLAG_JOURNAL_INODE flag will be set. If this flag is set, then
recreate the filesystem after checking the filesystem.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
This is probably only useful in artificial test cases, but it will be
useful if we ever do the "inodes in directory" idea for ext4.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs and kernel implementation of directory hash tree has a
bug which causes the implementation to be dependent on whether
characters are signed or unsigned. Platforms such as the PowerPC,
Arm, and S/390 have signed characters by default, which means that
hash directories on those systems are incompatible with hash
directories on other systems, such as the x86.
To fix this we add a new flags field to the superblock, and define two
new bits in that field to indicate whether or not the directory should
be signed or unsigned. If the bits are not set, e2fsck and fixed
kernels will set them to the signed/unsigned value of the currently
running platform, and then respect those bits when calculating the
directory hash. This allows compatibility with current filesystems,
as well as allowing cross-architectural compatibility.
Addresses Debian Bug: #389772
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE (0x0008) - change i_blocks to be
in units of s_blocksize units instead of 512-byte sectors, use
l_i_frag and l_i_fsize as i_blocks_hi (could also be part of 64BIT).
E2fsck and debugfs changed to support i_blocks_hi instead of l_i_frag and
l_i_fsize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check to see if the superblock hint for the external journal needs to
be updated, and if so, offer to update it. (Addresses Debian Bug:
#355644)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the ability for the e2fsck configuration file to override the
behaviour of e2fsck when a particular filesystem problem is
encountered. This allows reconnecting an inode to lost+found to not
stop the boot sequence, if a system administrator really badly wants
this behaviour for some specialized reason, for example.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the superblock last mount time or last write time is in the future, fix
this automatically if e2fsck is in preeen mode, since Debian's boot sequence
bogusly doesn't set the time correctly until potentially very late in the bootup
process, and this can cause false positives that will cause users' systems
to fail to booting. (Addresses Debian Bugs #343662 and #343645)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Detect if the superblock's last mount field or last write field is in
the future, and offer to fix if so. (Addresses Debian Bug #327580)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
easier to understand (sorry, translators).
Add new @m (multiply-claimed) and @n (invalid) expansions for e2fsck
problem descriptions.
Add Dutch translation, and update French translation.
Add an explanation of how the @-expansion and %-exapansion works in
e2fsck/problem.c to make life easier for the translators.
Synchronize and update po files.
stored in inodes into e2fsck.
There are a number of bug fixes and enhancements over the original lustre fsck
BK repository. The biggest one is that this extended attribute values must
be aligned on 4-byte boundaries.
resize_inode capability disabled, but which still have the
s_reserved_gdt_blocks field set in the superblock, or which
still have blocks in the inode #7 (the resize inode).
problem.c (PR_1_BB_FS_BLOCK, PR_1_BBINODE_BAD_METABLOCK_PROMPT):
Fix up the handling of corrupted indirect blocks in the
bad block. We now correctly handle the case where there
is an overlap between a block group descriptor or
a superblock and a bad block indirect block. In the case
where the indirect block is corrupted, we now suggest
"e2fsck -c".
superblock. E2fsck will automatically save the journal information
in the superblock if it is not there already, and will use it if the
journal inode appears to be corrupted. ext2fs_add_journal_inode()
will also save the backup information, so that new filesystems
created by mke2fs and filesystems that have journals added via
tune2fs will also have journal location written to the superblock as
well. Debugfs's logdump command has been enhanced so that it can
use the journal information in the superblock.
The debugfs man page has been improved to more fully describe the
logdump command.
Added two new functions, ext2fs_file_open2() and
ext2fs_inode_io_intern2() which take a pointer to an inode structure;
this is needed so that e2fsck and debugfs can synthesize a
fake journal inode and use it to access the journal.
a single directory block (because this is the easy case;
we don't currently check for duplicates that span
directory blocks, for now. Eventually for htree
directories we can do this by searching for all directory
blocks that have a hash overflow, and then searching the
adjacent blocks to find all other potential duplicates.)
code accidentally had the INDEX_FL backwards compatibility code
removed. E2fsck will now fix HTREE corruptions in preen mode, and
mke2fs will not create filesystems with the dir_index flag set
by default. (The user has to specifically request it.)
Add additional checks to HTREE directories. We now check the count
and limit fields in the htree header, as well as assuring that the
hash table in each interior node is in ascending order. We also
check to make sure all leaf nodes are have the expected depth in
the tree.
Updated test cases to deal with all of the above.
using a non-zero hash version (i.e., half MD4 or TEA hash).
The hash version wasn't getting copied into dx_dir->hashversion and
this caused the kernel to treat all directories if they were using the
legacy hash, which was Bad.
would cause i_size to be too big), and offer to truncate the inode.
Remove old bogus i_size checks.
Add test case which tests e2fsck's handling of large sparse files.
Older e2fsck with the old(er) bogus i_size checks didn't handle
this correctly.
V2 fields are set on a V1 journal superblock, or an
internal V2 journal has s_nr_users is non-zero, clear the
entire journal superblock beyond the V1 superblock. This
fixes botched V1->V2 updates.
problem.c, problem.h (PR_0_CLEAR_V2_JOURNAL): Add new problem code.
f_bad_local_jnl: New test which tests for a V2 journal with bad
fields caused by a botched V1->V2 upgrade.
which will automatically relocate the ext3 journal from a
visible file to an invisible journal file if the
filesystem has been opened read/write.
super.c (check_super_block): Add call to e2fsck_move_ext3_journal
problem.c, problem.h (PR_0_MOVE_JOURNAL, PR_0_ERR_MOVE_JOURNAL):
Add new problem codes.
Andreas's symlink code; check_blocks() was unconditionally testing
inode_bad_map without checking to see if it existed first. Fixed
problem a different way; we now no longer check inode_bad_map at all,
since the file might not get deleted in pass 2 anyway. We move the
large file feature reconciliation code to to e2fsck_pass2(), and in
deallocate_inode() in pass2.c, we decrement the large files counter if
we're about to delete a large file.
pass1.c (mark_inode_bad): Replace alloc_bad_map with a function which
sets the bit in the bad inode bitmap.
(e2fsck_pass1): Check for fast symlinks with an invalid size, and set
the bad inode map in that case.
pass2.c (e2fsck_process_bad_inode): Check for fast symlinks with an
invalid size and prompt the user if the inode should be cleared.
problem.h, problem.c (PR_2_SYMLINK_SIZE): Added new problem code.
problem.c, problem.h: Change PR_0_JOURNAL_UNSUPP_INCOMPAT and
PR_0_JOURNAL_UNSUPP_ROCOMPAT so they aren't fatal errors, but prompt
to see if the user should abort. Removed the
PR_0_JOURNAL_RESET_COMPAT problem code.
journal.c (e2fsck_journal_load): If there are incompatible journal
flags, just return an error code.
(e2fsck_check_ext3_journal): If e2fsck_journal_load returns an error
code indicating that there are incompatible journal flag, check to see
if we should abort, and then offer to clear the journal.
journal.c (e2fsck_journal_reset_super): Fix bug; the reset journal
wasn't getting written out to disk since the dirty bit wasn't being
set on the buffer.
(e2fsck_journal_load): Don't print an error message if the journal
version number is wrong; just return a error code reflecting this
fact. If the block type in the journal superblcok is obviously not a
version number, report the journal is corrupted.
(e2fsck_check_ext3_journal): On an unsupported journal version, prompt
to abort by default, but then offer a chance to clear the journal as
corrupt.
problem.c, problem.h (PR_0_JOURNAL_UNSUPP_VERSION): Added new problem code.
pass1.c: Treat inodes with a low dtime (that were from a corrupted
orphan list) specially.
problem.c, problem.h: Add new problem codes PR_1_LOW_DTIME and
PR_1_ORPHAN_LIST_REFUGEES, and a new latch group, PR_LATCH_LOW_DTIME.
problemP.h: Expand the size of the problem flag to be an int instead
of a short. Expand space in the flag word which is reserved for
problem latch flags from 3 bits to 8 bits.
ChangeLog, expect.1, expect.2, image.gz, name:
f_badorphan: New test which verifies corrupted orphan list handling.
super.c (check_super_block): Be more strict on checking
s_r_blocks_count superblock field.
problem.c, problem.h (PR_0_JOURNAL_UNSUPP_ROCOMPAT,
PR_0_JOURNAL_UNSUPP_INCOMPAT, PR_0_JOURNAL_RESET_COMPAT): New problem
codes.
journal.c (e2fsck_journal_load): Use a problem code to report
unsupported feature flags. There is code to clear unsupported flags,
but since this is dangerous, it's not allowed in the problem code
table.
journal.c (e2fsck_journal_reset_super): initialize the journal
sequence number to a random value to avoid recovering bad transactions
from a corrupt journal.
pass1.c (e2fsck_pass1): Cap the maximum legal size of a file by the
limit caused by the fact that i_blocks is in 512 byte units, and that
the Linux buffer cache also fundamentally assumes 512 byte sectors.
Make sure that the journal inode is a regular file, and when clearing
an unused journal inode, make sure the icount db is updated.
problem.c, problem.h (PR_1_JOURNAL_BAD_MODE): Add new problem code.
ChangeLog, journal.c:
journal.c (e2fsck_journal_fix_unsupported_super): Remove unused
function. Add FIXME notes to e2fsck_get_journal(), from Andreas
Dilger.
problem.c: For PR_1_RESERVED_BAD_MODE, print a description of the
reserved inode. In PR_0_JOURNAL_HAS_JOURNAL, prompt to clear the
journal, rather than deleting it (which is more accurate). (From
Andreas Dilger.)
journal.c (e2fsck_journal_fix_bad_inode): Set pctx->ino to the bad
journal number.
problem.c (PR_0_JOURNAL_BAD_INODE): Use pctx->ino instead of pctx->num
when printing the bad journal inode number.
pass1.c (e2fsck_pass1): Moved journal inode handling out to its own
block; if the journal inode is not in use, and it contains data, offer
to clear it.
problem.h, problem.c (PR1_JOURNAL_INODE_NOT_CLEAR): Add new problem
code.
problem.c: Modified problem table to use a new abbreviations.
pass1b.c: Change routines to use PR_1B_BLOCK_ITERATE when reporting
problems rather than using com_err directly.
problem.c, problem.h (PR_1B_BLOCK_ITERATE): Add new problem code.
message.c (expand_percent_expression): Add safety check. If ctx->str
is NULL, print "NULL" instead of dereferencing the null pointer.
pass1b.c, pass2.c, pass3.c: Change calls to ext2fs_block_iterate to
ext2fs_block_iterate2, to support 64-bit filesizes and to speed things
up slightly by avoiding the use of the ext2fs_block_iterate's
compatibility shim layer.
version.h:
Update for WIP release.
super.c (release_inode_block, release_inode_blocks,
release_orphan_inodes): Add code to deal with truncating inodes which
are still in use (but which are on the orphan list because they need
truncation).
problem.c, problem.h: Rename PR_0_CLEAR_ORPHAN_INODE to
PR_0_ORPHAN_CLEAR_INODE, and remove PR_0_ORPHAN_INODE_INUSE.
journal.c (e2fsck_run_ext3_journal): Add i18n support, and print a
message when the journal is being recovered.
journal.c (e2fsck_journal_load): Fix **nasty** bug which caused
e2fsck_check_ext3_journal to smash the journal because
journal->j_transaction_sequence wasn't getting initialized.
journal.c: (recover_ext3_journal, e2fsck_run_ext3_journal): Move call
to e2fsck_clear_recover from recover_ext3_journal to after the
filesystem has been closed and reopened. Otherwise, the superblock in
the filesystem handle will probably be stale, and will overwrite the
newer version of the superblock written by the log recovery.
message.c (expand_inode_expression): Add support for %Iu and %Ig
problem.h (PR_0_CLEAR_ORPHAN_INODE): Add new problem code.
super.c (release_orphan_inodes, release_inode_block,
release_inode_blocks): Update the block group descriptor counts when
freeing the orphan inode. Use PR_0_CLEAR_ORPHAN_INODE to report when
we clear an orphan.
journal.c (e2fsck_run_ext3_journal): Fix a bug where we attempted to
reopen the filesystem using the device name instead of the filesystem
name.
Makefile.in: Update the make dependencies
problem.c, problem.h: Add the problem codes:
PR_0_ORPHAN_ILLEGAL_BLOCK_NUM, PR_0_ORPHAN_ALREADY_CLEARED_BLOCK,
PR_0_ORPHAN_ILLEGAL_HEAD_INODE, PR_0_ORPHAN_ILLEGAL_INODE,
PR_0_ORPHAN_INODE_INUSE
super.c (release_inode_blocks, release_orphan_inodes,
check_super_block): Add support for clearing orphaned inodes from the
unmounted filesystem.
journal.c (e2fsck_recover_ext3_journal): Remove the last orphan check;
this is now handled in check_super_block --- non-journaled filesystems
can use the orphan list in the future. Also, move the the re-opening
of the filesystem to e2fsck_run_ext3_journal().
debugfs.c:
debugfs.c (finish_range): Make sure the pager FILE pointer to use.
configure, configure.in, ChangeLog:
configure.in (JFS_DEBUG): Add support for --enable-jfs-debug
journal.c: implement loading of ext3 journal for recovery code
problem.c (fix_problem): return answer from PR_AFTER_CODE to caller.
Add journal problems.
recovery.c (journal_recover): user-space ext3 journal recovery code
unix.c (main) : check journal and do recovery in separate steps
jfs.h, recovery.c: Files ext3 kernel code.
jfs_compat.h: Compatibility header file to allow kernel code to be
linked to e2fsck.
pass5.c (check_block_bitmaps, check_inode_bitmaps): Add error checking
for a "should never happen case".
problem.c, problem.h (PR_5_COPY_IBITMAP_ERROR,
PR_5_COPY_BBITMAP_ERROR): Add new error codes.
pass1.c (pass1, check_size): Apply patch from Chris Wedgewood
(cw@foof.org) which checks to see if special devices have a non-zero
size, and deals with it.
problem.c, problem.h (PR1_SET_NONZSIZE): Add new problem code.
problem.c, problem.h (PR_0_HURD_CLEAR_FILETYPE): Add new problem code.
super.c (check_super_block): If the OS type in the superblock is the
Hurd, check to see if the filetype feature is set, and offer to clear
it if so. This needs to be done since the Hurd doesn't properly
support the filetype feature. (And since the hurd allows the
transmogrification of files to special files and vice versa --- for no
good reason that I can understand --- it can't support the filetype
feature for the forseeable future, either.)
ChangeLog, mke2fs.c:
mke2fs.c (main): We forcibly turn off the filetype feature if the OS
is the hurd, since the hurd doesn't support it. (And since the hurd
allows the transmogrification of files to special files and vice versa
--- for no good reason that I can understand --- it can't support the
filetype feature for the forseeable future, either.)
mke2fs.c (proceed_question): Fix reversed sense of proceed_question
that was busted due to the internationalization patch. Fixed bug
where if proceed_question was called twice, the input buffer wasn't
cleared of the previous question's newline.
ChangeLog, expect.1, expect.2, image.gz, name:
f_hurd: Add test for Hurd-specific features (right now, just checks to
make sure the filetype feature is cleared)
ChangeLog, ls.c:
ls.c (list_super): Change the string displayed for the Hurd to be
GNU/Hurd, instead of just "GNU".
pass1.c (check_immutable, e2fsck_pass1_check_device_inode): Check for
the append-only as well as the immutable flag.
problem.c (PR_1_SET_IMMUTABLE): Adjust message to include append-only
flag. Fix comment for compression flag.
unix.c (main): If compression is enabled on the filesystem, print a
warning message (for now).
message.c: Add new compression shortcut: @c == compress
problem.c, problem.h (PR_1_COMPR_SET): Add new error code.
pass1.c (check_blocks): If the inode has EXT2_COMPRBLK_FL flag set,
check to see if the filesystem supports compression. If it does pass
this information down to process_block() so it can treat the
compressed block flag words correctly. If not, offer to clear the
flag, since it shouldn't be set.
(process_block): If an inode has the compressed inode flag set, allow
EXT2FS_COMPRESSED_BLKADDR.
pass1b.c (process_pass1b_block, delete_file_block, clone_file_block):
pass2.c (deallocate_inode_block): Use HOLE_BLKADDR to check to see if
the block can be skipped.
ChangeLog, Makefile.in:
Makefile.in: Exclude the internationalization files from being
distributed.
ChangeLog, configure, configure.in:
configure.in: Add support for --enable-compression. This is
experimental code only for now, which is why it's under --enable test.
Once it's stable, it will always be compiled in.
TODO:
Commit additional TODO items.
problem.c (fix_problem): Support a new flag, PR_PREEN_NO which means
the answer is assumed to be no in preen mode. This is now used in the
PR_1_SET_IMMUTABLE code, so that in preen mode we ignore these inodes
and just print a warning message.
pass1.c (e2fsck_pass1): If the filesystem does not support imagic
inodes, if an inode has the imagic flag set, offer to clear the imagic
flag. If a valid device/fifo/socket has the immutable flag set, call
the new helper function check_immutable() to offerto clear the
immutable flag.
pass2.c (check_filetype): Use the new ext2_file_type() helper function
instead of calculating the file_type information manually.
pass3.c (e2fsck_reconnect_file): When adding a link to lost+found,
calculate the filetype information so that ext2fs_link() can use the
information if applicable. (get_lost_and_found): Create the
/lost+found directory with the correct filetype information if
applicable.
util.c (ext2_file_type), e2fsck.h: New function which returns the
directory entry file type information given the inode's mode bits.
problem.c, problem.h: Added new problem codes PR_1_SET_IMAGIC and
PR_1_SET_IMMUTABLE.
ChangeLog, mke2fs.8.in:
mke2fs.8.in: Update manual page so that the sparse_option filesystem
option is properly named.
problem.c, problem.h (PR_2_NULL_NAME): Add new problem code.
pass2.c (check_dir_block): Require that the length of the directory
entry be at least 12 bytes. Check to see if the filename is
zero-length, and flag that as an error.
pass2.c (check_filetype): If the filetype filesystem feature is not
set, and a directory entry has a dirent feature, offer to clear it
(since 2.0 kernels will do complain will interpret it as a very large
name length field).
pass4.c (e2fsck_pass4): If an inode is set in the inode_imagic_map
bitmap, don't check to see if it is disconnected from the inode tree
(because it almost certainly will be). Free inode_imagic_map at the
end of pass 4.
pass2.c (check_dir_block, check_filetype): If the FILETYPE feature is
set, check the directory entry's filetype information field, and
fix/set it if necessary. (e2fsck_pass2): Free the inode_reg_map
bitmap at the end of pass 2.
pass1.c (e2fsck_pass1, alloc_imagic_map): Allocate and fill in
information for inode_reg_map and inode_imagic_map, which indicates
which inodes are regular files and AFS inodes, respectively.
Since only the master superblock is written during a restart, force
that superblock to be used after a restart; otherwise changes to the
block group descriptors end up getting ignored.
problem.c, problemP.h: If e2fsck is run -n, make def_yn variable be 0
for "no". Add support for a new flag, PR_NO_NOMSG, which supresses
the problem message if e2fsck is run with the -n option.
problem.c, problem.h (PR_2_SET_FILETYPE, PR_2_BAD_FILETYPE): Add new
problem codes.
message.c (expand_dirent_expression): Add support for %dt which prints
the dirent type information.
e2fsck.c (e2fsck_reset_context): Free new bitmaps (inode_reg_map and
inode_imagic_map).
e2fsck.h (e2fsck_t): Add new inode_reg_map and inode_magic_map to the
context structure.
ChangeLog, nt_io.c:
nt_io.c: New file which supports I/O under Windows NT.
ChangeLog, gen_uuid_nt.c:
gen_uuid_nt.c: New file which creates a UUID under Windows NT.
Many files:
Add support for non-Unix compiles
problem.c, problem.h (PR_0_INODE_COUNT_WRONG): Add new problem code.
super.c (check_super_block): Add check to make sure the total number
of inodes is sane, since this can be calculated from the number of
groups times the number of inodes per group. Offer to correct it if
it is incorrect.
util.c (print_resource_track): Use mallinfo if present to get more
accurate malloc statistics.
pass3.c (get_lost_and_found): Check to see if lost+found is a plain
fail; if so, offer to unlink it.
problem.c, problem.h (PR_3_LPF_NOTDIR): Add new problem code.
problem.c: Fix problem message for PR_1_BAD_GROUP_DESCRIPTORS so that
the block group number is printed. Add new prompt, PROMPT_UNLINK.
pass3.c (get_lost_and_found): If the filesystem is not opened
read-only, then force /lost+found to be created if it is not present.
problem.c: Allow PR_3_NO_LF_DIR to be handled during a preen operation.
ChangeLog, Makefile.in:
Makefile.in: Updated dependencies.
ChangeLog, fsck.c:
fsck.c (load_fs_info): Parse /etc/fstab ourselves, instead of relying
on getmntent(). This has the advantage of allowing us to properly
handle missing pass numbers correctly.
ChangeLog, configure.in:
configure.in: Add paths.h to header files for which we search.
tune2fs.8.in: Fix minor display bug in the nroff.
mke2fs.c (show_stats, write_inode_tables): Use the log10 function to
calculate the display of block numbers so that things look nice on an
80 character display.
mke2fs.c (usage): Add the sparse-super-flag to the usage message.
ChangeLog, e2fsck.c, pass1.c, pass2.c, problem.c, problem.h, unix.c:
unix.c (main): Move ext2fs_close() after e2fsck_free_context() since
e2fsck_free_context may reference data in ctx->fs.
e2fsck.c (e2fsck_reset_context): Make sure ctx->fs is non-NULL before
checking ctx->fs->dblist.
pass1.c (e2fsck_pass1): Use the device check subroutine on FIFO's and
Socket's, so that we catch bogus immutable inodes.
pass2.c (process_bad_inode): Process bad socket and fifo's.
problem.h, problem.c: Define new problem codes PR_2_BAD_FIFO and
PR_2_BAD_SOCKET.
problem.c: Add PR_3_NO_DIRINFO error code.
super.c (check_super_value): Rename min and max to min_val and max_val
to avoid possible cpp macro conflicts.
pass4.c (e2fsck_pass4): Rename max to maxgroup, to avoid possible cpp
macro conflicts.
pass3.c (e2fsck_pass3): Rename max to maxdirs, to avoid possible cpp
macro conflicts.
(check_directory): Fix logic to avoid possible core dump in the
case of ext2fs_get_dir_info returning NULL. (By the time we get here,
it should never happen, but...). Also simply/streamline the control
flow of the function.
unix.c: Fix bug in check of feature set, to make sure we can really
fix this filesystem.
problem.h: Make blkcount type to be of type blkcnt_t. Make the num
field be a 64 bit type. Add the problem code PR_1_FEATURE_LARGE_FILES
problem.c: Add table entry for the problem code PR_1_FEATURE_LARGE_FILES.
pass1.c (e2fsck_pass1): A non-zero i_dir_acl field is only a problem
for directory inodes. (Since it is also i_size_high now.) If there
are no large_files, then clear the LARGE_FLAG feature flag. If there
are large_files, but the LARGE_FLAG feature flag is not set, complain
and offer to fix it.
(check_blocks): Add support to deal with non-directory inodes that
have i_size_high set (i.e., large_files). Don't give an error if a
directory has preallocated blocks, to support the DIR_PREALLOC
feature.
(process_block, process_bad_block): The blockcnt variable is a type of
blkcnt_t, for conversion to the new block_iterate2.
pass2.c (process_bad_inode): A non-zero i_dir_acl field is only a
problem for directory inodes. (Since it is also i_size_high now.)
message.c (expand_inode_expression): Print a 64-bits of the inode size
for non-directory inodes. (Directory inodes can only use a 32-bit
directory acl size, since i_size_high is shared with i_dir_acl.) Add
sanity check so that trying to print out the directory acl on a
non-directory inode will print zero. (expand_percent_expression): %B
and %N, which print pctx->blkcount and pctx->num, can now be 64 bit
variables. Print them using the "%lld" format if EXT2_NO_64_TYPE is
not defined.
e2fsck.h: Add the large_flagsfield to the e2fsck context.
e2fsck.c (e2fsck_reset_context): Clear the large_flags field.
ChangeLog, expect.1:
f_messy_inode: Modify test to deal with changes to support 64-bit size
files. (/MAKEDEV had i_dir_acl, now i_size_high, set.)
pass1.c, pass2.c, pass3.c, pass4.c, pass5.c: Add calls to the progress
indicator function.
pass1.c (scan_callback): Add call to the progress feedback function
(if it exists).
super.c (check_super_block): Skip the device size check if the
get_device_size returns EXT2_EXT_UNIMPLEMENTED.
iscan.c (main): Don't use fatal_error() anymore.
pass1b.c, swapfs.c, badblocks.c: Set E2F_FLAG_ABORT instead of calling
fatal_error(0).
problem.c, pass3.c (PR_3_ROOT_NOT_DIR_ABORT,
PR_3_NO_ROOT_INODE_ABORT): New problem codes.
problem.c, pass2.c (PR_2_SPLIT_DOT): New problem code.
problem.c, pass1.c (PR_1_SUPPRESS_MESSAGES): New problem code.
problemP.h: New file which separates out the private fix_problem data
structures.
util.c, dirinfo.c, pass1.c, pass1b.c, pass2.c, pass5.c, super.c,
swapfs.c util.c: allocate_memory() now takes a e2fsck context as its
first argument, and rename it to be e2fsck_allocate_memory().
problemP.h:
New file which contains the private problem abstraction definitions.
Makefile.pq:
Remove include of MAKEFILE.STD, which doesn't exist at this point.
pass*.c, super.c: Massive changes to avoid using printf and com_err
routines. All diagnostic messages are now routed through the
fix_problem interface.
pass2.c (check_dir_block): Check for duplicate '.' and '..' entries.
problem.c, problem.h: Add new problem codes PR_2_DUP_DOT and
PR_2_DUP_DOT_DOT.
problem.c: Added new problem codes for some of the superblock
corruption checks, and for the pass header messages. ("Pass
1: xxxxx")
util.c (print_resource_track): Now takes a description argument.
super.c, unix.c, e2fsck.c: New files to separate out the
operating-specific operations out from e2fsck.c. e2fsck.c now
contains the global e2fsck context management routines, and
super.c contains the "pass 0" initial validation of the
superblock and global block group descriptors.
pass1.c, pass2.c, pass3.c, pass4.c, pass5.c, util.c: Eliminate
(nearly) all global variables and moved them to the e2fsck
context structure.
problem.c, problem.h: Added new problem codes PR_0_SB_CORRUPT,
PR_0_FS_SIZE_WRONG, PR_0_NO_FRAGMENTS, PR_0_BLOCKS_PER_GROUP,
PR_0_FIRST_DATA_BLOCK
expect.1, expect.2:
Updated tests to align with e2fsck problem.c changes.
message.c: Add compression for the word "Illegal"
problem.c: Added entries for PR_2_BAD_CHAR_DEV and PR_2_BAD_BLOCK_DEV
pass1.c (pass1, check_device_inode), pass2.c (process_bad_inode): Use
a more stringent test for a valid device.
ChangeLog, Makefile.in:
Makefile.in (install): Fix rm command to use $(DESTDIR) appropriately.
pass1.c (mark_table_blocks): Mark the superblock and group descriptor
blocks first, so that any conflicts between these and the bitmap or
inode table blocks is noticed.
problem.c: Fix message printed out when a block or inode bitmap
conflicts with other fs data, has the correct group number in it.
Theodore Ts'o