This commit enables read/write access via the block iterator for
extent-based inodes.
Also fixed some bugs regarding the handling on non-leaf extent nodes
when iterating over extents in a file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_extent_delete() will also update the parent node and decrement
the inode block count.
Passing in the EXT2_EXTENT_DELETE_KEEP_EMPTY flag will allow the empty
node to remain.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allows unmapping or remapping single mapped logical blocks,
and mapping currently unmapped blocks.
Also implements ext2fs_extent_fix_parents() to fix parent
index logical starts, if the first index of a node changes
its logical start block.
Currently this can result in unnecessary new single-block extents; I
think perhaps ext2fs_extent_insert should grow a flag to request
merging with a nearby extent?
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext2fs_extent_insert finds that the requested node
for insertion is full, it will currently fail.
With this patch it will split as necessary to make room, unless an
EXT2_EXTENT_INSERT_NOSPLIT flag is passed to it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When called for a given handle, the new function extent_node_split()
will split the current node such that half of the node's entries will
be moved to a new tree block. The parent will then be updated to
point to the (now smaller) original node as well as the new node.
If the root node is requested to be split, it will move all
entries out to a new node, and leave a single entry in the
root pointing to that new node.
If the reqested split node's parent is full it will recursively
split up to the root to make room for the new node's insertion.
If you ask to split a non-root node with only one entry,
it will refuse (we'd have an empty node otherwise).
It also updates the i_blocks count when a new block has
successfully been connected to the tree.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the inode's i_block[] array is completely empty, create an empty
extent tree in the in-core inode and set the EXT4_EXTENT_FL inode
flag. This makes it easy to create a new inode using extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_extent_delete() will leave the extent handle pointing at the
next extent --- except if the last extent in the node. To deal with
this last case, call ext2fs_get_extent_info() and stop scanning after
processing info->num_entries extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_delete_extent() deletes the current extent and moves to the
next extent (if present). So we need to skip moving to the next
extent and get the (new) current extent and check it before moving on.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since version 2.50 autoconf fully supports checking sizes of types
(with AC_CHECK_SIZEOF) when cross-compiling. Therefore there is no
need to preset the respective cache variables anymore. The following
patch removes the special case. There is no need to adjust AC_PREREQ
as it's set to 2.50 already.
Tested successfully cross-building for the mips64el-linux-gnu host on
an i386-linux-gnu build system, removing the following warning
(because of a mismatch for the "long" type):
Sizeof(__U64__TYPEDEF) is 4 should be 8
Problem detected with asm_types.h
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes problems turned up by a test case written by Erez Zadok's
group which constantly reformats filesystems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
While synchronizing e2fsck's recovery.c with the latest 2.6 kernel
sources, I discovered a serious bug that apparently had been fixed in
the kernel sometime between Deceber 2003 and April 2005, but which had
not been carried over to e2fsprogs. Specifically, when blocks whose
first 4 bytes are JFS_MAGIC_NUMBER (0xc03b3998) are written into the
journal, the first 4 bytes zero'ed out. A one character typo meant
that when the blocks were replayed by e2fsck, the JFS_MAGIC_NUMBER
would not be restored.
Oops.
Fortunately, it is *highly* unlikely that ext4 metadata blocks will
contain that magic number in the first four bytes, and data=journalled
is a relatively rarely used.
This commit fixes this bug, as well as updating e2fsck's recovery.c to
be in sync with 2.6.25.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The logic for stopping at the right level in extent_goto was wrong,
so if you asked it to go to any level other than 0 (the leaf
level) it would fail.
Also add this argument to the tst_extents goto command to test it.
(I thought this was a failure in my split code but it was this
helper that was causing problems...)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Swap is actually native-endian on disk, and with the latest
swapspace sanity checks I added we need to have native swapspace
examples in the blkid tests, so re-mkswap them during testing.
One one other required change, though; mkswap requires at least
10 pages of swap, so the image needs to be increased to 10x64k
if mkswap is to succeed...
Maybe it'd be better to just dd it out on the fly?
Addresses-redhat-bugzilla: 445786
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Problem was introduced by commit a4b69b7f18
Thanks to Eric Sandeen from Red Hat for pointing out this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With the new mke2fs changes the output of the
command differs if we run mke2fs on a device that
already have the file system. So erase the file system
before running mke2fs so that output remain as expected.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add new option -I <inode_size> to tune2fs. This is used to change the
inode size. The size need to be multiple of 2 and we don't allow to
decrease the inode size.
As a part of increasing the inode size we increase the inode table
size. We also move the used data blocks around and update the
respective inodes to point to the new block
tune2fs uses the undo I/O manager when migrating to large inode. This
helps in reverting the changes if end results are not correct. The
environment variable TUNE2FS_UNDO_DIR is used to indicate the
directory within which the tdb file need to be created. The file will
be named tune2fs-<device-name> If TUNE2FS_UNDO_DIR is not set
/var/lib/e2fsprogs is used
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When running mke2fs, if a file system is detected
on the device, we use Undo I/O manager as the io manager.
This helps in reverting the changes made to the filesystem
in case we wrongly selected the device.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new function ext2fs_zero_blocks(), and use it so that journal
data blocks is written in larger chunks to speed up the creation of
the journal.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2undo command can be used to replay the transaction saved in the
transaction file using undo I/O Manager.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This I/O manager saves the contents of the location being overwritten
to a tdb database. This helps in undoing the changes done to the
file system.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
"yY" should be translated to "jJ" instead of "yJ"
Addresses-Sourceforge-Bug: #1947683
Signed-off-by: Makoto Dei <makoto@turbolinux.co.jp>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The combination of meta_bg and resize_inode leads to a corrupt
filesystem, and it's not really clear it makes any logical sense.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the way we allocate bitmaps and inode tables if the FLEX_BG
feature is used at mke2fs time. It places calculates a new offset for
bitmaps and inode table base on the number of groups that the user
wishes to pack together using the new "-G" option. Creating a
filesystem with 64 block groups in a flex group can be done by:
mke2fs -j -I 256 -O flex_bg -G 32 /dev/sdX
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, the portion of the inode table for block group 0 was
always completely zero'ed out, so the ext2fs_open_inode_scan() didn't
handle a non-zero bg_itable_used value for the first block group. Fix
this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>