mke2fs.c (zap_sector): Fix error message printed when zap_sector
fails.
dumpe2fs.c (list_desc): Fixed format string bug when printing the
inode table location in non-hex format.
jfs_compat.h (J_ASSERT):
journal.c (e2fsck_run_ext3_journal):
pass3.c (adjust_inode_count): Use fatal_error() instead of exit().
ChangeLog, super.c:
super.c (release_orphan_inodes): Fix typo; should do bounds checking
on next_ino instead of ino.
unix.c: Use fatal_error() instead of exit() whenever possible. Also
fix the fsck exit codes so that we use FSCK_USAGE when it is
appropriate. Rename global_signal_ctx to e2fsck_global_ctx and let it
be exported globally.
journal.c (e2fsck_journal_load): Fix **nasty** bug which caused
e2fsck_check_ext3_journal to smash the journal because
journal->j_transaction_sequence wasn't getting initialized.
journal.c: (recover_ext3_journal, e2fsck_run_ext3_journal): Move call
to e2fsck_clear_recover from recover_ext3_journal to after the
filesystem has been closed and reopened. Otherwise, the superblock in
the filesystem handle will probably be stale, and will overwrite the
newer version of the superblock written by the log recovery.
message.c (expand_inode_expression): Add support for %Iu and %Ig
problem.h (PR_0_CLEAR_ORPHAN_INODE): Add new problem code.
super.c (release_orphan_inodes, release_inode_block,
release_inode_blocks): Update the block group descriptor counts when
freeing the orphan inode. Use PR_0_CLEAR_ORPHAN_INODE to report when
we clear an orphan.
journal.c (e2fsck_run_ext3_journal): Fix a bug where we attempted to
reopen the filesystem using the device name instead of the filesystem
name.
random_exercise.c: New file which feeds a lot of file creations and
deletions (while leaving the file descriptor open, and then closing
the file descriptor later). This generates lots of fodder for the
orphan list code, as well as for the ext3 journal.
hold_inode.c: New file which holds an inode or a directory open (for
testing orphan list code).
ChangeLog, run_e2fsck, expect.1, expect.2, image.gz, name, expect:
run_e2fsck: Filter out JFS DEBUG messages when comparing e2fsck output.
f_journal: New test case which checks out running the ext3 journal.
f_orphan: New test case which checks clearing the list of orphan
inodes (files and directories).
f_swapfs/expect: Update to reflect new debugfs format for dumping the
blocks of an inode.
get_device_by_label.c: Add call to ext2fs_find_block_device if we
can't find the device using the name given by /proc/partitions. (This
can happen if devfs is compiled into the kernel, but not mounted.)
Fixup one more missing use of lb->f instead stdout when printing the
comma separator.
ChangeLog, util.c:
util.c (open_pager): Set SIGPIPE to be ignored, so that quitting out
of the pager doesn't blow away debugfs.
finddev.c, ext2fs.h, Makefile.in: Add new file, finddev.c, which
provides the function ext2fs_find_block_device(). This function
returns the pathname to a block device, given its device number.
Makefile.in: Update the make dependencies
problem.c, problem.h: Add the problem codes:
PR_0_ORPHAN_ILLEGAL_BLOCK_NUM, PR_0_ORPHAN_ALREADY_CLEARED_BLOCK,
PR_0_ORPHAN_ILLEGAL_HEAD_INODE, PR_0_ORPHAN_ILLEGAL_INODE,
PR_0_ORPHAN_INODE_INUSE
super.c (release_inode_blocks, release_orphan_inodes,
check_super_block): Add support for clearing orphaned inodes from the
unmounted filesystem.
journal.c (e2fsck_recover_ext3_journal): Remove the last orphan check;
this is now handled in check_super_block --- non-journaled filesystems
can use the orphan list in the future. Also, move the the re-opening
of the filesystem to e2fsck_run_ext3_journal().
debugfs.c:
debugfs.c (finish_range): Make sure the pager FILE pointer to use.
configure, configure.in, ChangeLog:
configure.in (JFS_DEBUG): Add support for --enable-jfs-debug
setsuper.c: New function which implements the set_super_value command.
Allows the user to set arbitrary superblock fields.
ChangeLog, util.c:
util.c (open_pager): If the PAGER environment variable is not set,
default to using "more".
debugfs.c (dump_inode): Cap the length when printing a fast symbolic
link to inode.i_size.
(list_blocks_proc): Print block ranges (4510-4533) to make the stat
output easier to read.
dumpe2fs.c (usage): add fhx options to usage message, add -x option to
print out the per-group block numbers in hex, add line for location of
primary/backup superblock and group descriptors
mke2fs.c: rename max to group_blk_max avoid potential macro conflict
e2fsprogs.spec (Summary): Add description of resize2fs to the package
summary.
POTFILES.in:
Add recover.c and journal.c to the list of files that need
internationalization processing.
mke2fs.c (zap_sector): Change zap_bootsect to more general zap_sect.
(main): Clear the superblock when starting mke2fs, to avoid leaving
the filesystem in an inconsistent state.
ls.c (list_super): Use better description of s_last_orphan
.del-ext2_fs.h~7a460879, ChangeLog:
ext2_fs.h: Add comment explaining when journal fields are valid.
journal.c: implement loading of ext3 journal for recovery code
problem.c (fix_problem): return answer from PR_AFTER_CODE to caller.
Add journal problems.
recovery.c (journal_recover): user-space ext3 journal recovery code
unix.c (main) : check journal and do recovery in separate steps
jfs.h, recovery.c: Files ext3 kernel code.
jfs_compat.h: Compatibility header file to allow kernel code to be
linked to e2fsck.
Commit this file for future use; contains a configure.in script for when
libuuid gets separtead out into its own package.
libext2fs.texinfo:
Update version numbers for 1.19 release.
TODO:
Commit TODO list for 1.19 release.
README:
Update file for 1.19 release.
ChangeLog, e2fsprogs.spec:
e2fsprogs.spec: Merge in a few changes from the Red Hat 6.2 spec file,
now that we're using a modern rpm to build e2fsprogs. Also updated
version number to 1.19.
version.h:
Update version number for 1.19 release.
ChangeLog:
Check in changes for 1.19 release.
Add this file to the release, so that translators can easily get their hands
on the template file.
.cvsignore:
Remove e2fsprogs.pot from ignore list.
it.po, nyc.po:
Update .po files for 1.19 release.
badblocks.8.in: Added text explaining that the -n and -w options are
mutually exclusive.
badblocks.c (usage): Fix usage message to make it clear that the block
count must be specified if the starting block is to be specified.
(The starting block should be a option, in the long run.)
badblocks.c (test_nd): Save and restore the currently_testing variable
before going into the write verification loop. This avoids a loop
termination problem if the last block on the disk is bad. Also, turn
off the SIGALRM signal while restoring blocks after the user types ^C.
The num_saved variable is now static so that it won't get clobbered by
a longjmp. buf_used and bb_count are no longer static, since they
aren't used by the cleanup routines anymore.
badblocks.c (main): Removed an unsued varaible (buf_size). Fixed bad
getopt argument that didn't allow the 'b' option to take an argument.
Added error checking when parsing the starting block number. Fixed
lint warning in fscanf format string.
ext2fs.h (EXT2_LIB_FEATURE_INCOMPAT_SUPP): Add
EXT3_FEATURE_INCOMPAT_RECOVER (aka needs_recovery) to the list of
filesystem flags supported by the library.
ChangeLog, e2fsprogs.spec:
e2fsprogs.spec (%post): Remove resize2fs from its old location in
/usr/sbin in the postinstall script.
RELEASE-NOTES, version.h:
Update for WIP release.
Makefile.in (uuid_time): Fix compilation rule so that uuid_time.o
doesn't get bashed in order to build the command-line version of
uuid_time.
.del-ext2_fs.h~7a460879, ChangeLog:
ext2_fs.h: Update ext3 extension feature #define's.
unix.c (check_if_skip): Modify algorithm for checking s_max_mnt_count
to match with the kernel. (If s_max_mnt_count is negative, ignore the
mnt_count check.)
unix.c (e2fsck_update_progress): Adjust the width of the progress bar
dynamically, based on the filesystem name that we need to display.
unix.c (main): If the ext3 needs_recovery flag is set, call
e2fsck_run_ext3_journal() and then restart the e2fsck run.
journal.c (e2fsck_run_ext3_journal): New file which contains logic to
recover the ext3 journal. This version relies on the kernel being
able to mount the filesystem in order to run the journal.
fsck.c (execute, wait_one): Treat fsck.ext3 the same as fsck.ext2
(because they are the same) for the purposes of the progress bar
display logic.
ChangeLog, ls.c:
ls.c (list_super): Display the journal information fields in the
superblock if the filesystem has a journal.
tune2fs.8.in: Update manual page to document what happens if
max_mount_count is negative.
tune2fs.c (main): Allow setting the maximal count value to be
negative, since the kernel interprets that as forcing a check.
fsck.c (lookup, load_fs_info, check_all): Use lazy evaluation for
calling interpret_device(), since this requires root privileges if the
partitions need to be scanned. Otherwise, it's not possible to do
non-proot fsck's for removeable devices such as floppies if there are
any LABEL= or UUID= entries in /etc/fstab.
badblocks.c (check_mount, main): Check to see if the filesystem is
mounted before doing a read/write or non-destructive test. This can
be overriden using the new -f option.
badblocks.8.in: Added documentation for the -f option.
badblocks.8.in: Update manual page to reflect that the blocks-count
parameter is now optional. Also properly document the start-block
parameter.
badblocks.c (main): Allow the blocks-count parameter to be optional.
If it's not specified, use the size of the device as a default.
badblocks.c (test_nd): Significantly simplify the logic so that it's
more obviously what's going on. Fixed a few potential cases which
weren't handled correctly in the old, overly complicated logic.
(flush_bufs): Now doesn't take a second argument, and always forces a
sync; this is required before it's really safe to call BLKFLSBUF, at
least for some kernels.
Makefile.in (install): Install resize2fs in /sbin, not /usr/sbin.
ChangeLog, unix.c:
unix.c: Also, re-arrange the logic so that we do the time check only
after doing the percentage check, and we only advance the spinner if
we're about to display it.
ChangeLog:
Fix minor wording error in Chagelog.
unix.c (e2fsck_update_progress): Only save and check the last
percentage after multiplying it by 10, nor 1000, since we only need to
save values to a tenth of a percent (and the percentage is already
from 0 .. 100%, not 0 .. 1).