Continue to remove the external journal device even if the device
cannot be found.
Add a test to verify that the journal device/UUID are actually removed
from the superblock. It isn't possible to use a real journal device
for testing without loopback devices and such (it must be a block device)
and this would invite complexity and failures in the regression test.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Several compiler errors are quieted:
- zero-length gnu_printf format string
- unused variable
- uninitalized variable (though it isn't actually used for anything)
- fixed a bug in ext2fs_stat() if stat64() does not exist
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds new APIs: ext2fs_flush2 and ext2fs_close2 which take an
extra 'int flags' parameter.
This allows us to pass in an EXT2_FLAG_FLUSH_NO_SYNC flag which avoids
fsync'ing the filesystem when closing it. For the case we have in
mind where we are just constructing a throwaway ext2 filesystem in a
file in order to boot a VM, this saves over 5 seconds during the boot
process and avoids many unnecessary disk writes.
Existing code using ext2fs_flush and ext2fs_close remains unaffected
by this change.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since the libquota library has namespace contamination issues, don't
build a shared library and link against it statically. Don't include
it as part of the Debian packages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Enhance the debian build rules so it will create multiarch compliant
packages on those distributions that have support for it.
Also remove e2initrd-helper from the e2fsprogs package since no one
uses it any more.
Also update the debian policy standards version to 3.9.2.
Addresses-Debian-Bug: #632169
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
if tdb_dir points to a string allocated from profile_get_string,
it should be freed again before we exit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In theory sysconf() can fail, so check for an error return.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These reflect either file descriptors which aren't tested
for failure, or closures of fd's which may have failed.
In setup_tdb(), test for failure of mkstemp and return
without trying to open the file (again).
In reserve_stdio_fds, rather than closing the "extra"
fd == 3 due to the way the loop is written, just
don't go that far by using while (fd <= 2).
In logsave, it forks and retries forever if open fails,
but at least make coverity happy by explicitly not
trying to close a negative file descriptor.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Handle these failures in resize_inode, and handle the propagated
error in the caller.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fn and/or array was not freed in some error paths.
[ Also make sure the array is NULL terminated before we free it in
get_dirlist(). --tytso]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
block_buf and/or inode_buf may not be properly freed on an error
return.
Create a new errout: target to free them as needed in error conditions.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some error paths did not properly free "buf"
And the normal exit seemed to close e2_file twice (?)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In addition to not making sense, it causes a memory leak
when fs_type gets overwritten.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
e2fsck_allocate_memory() already sets allocated memory to 0,
so remove the explicit memset.
Especially since it was setting the wrong size (iter not *iter)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "count" variable is only ever set if FIBMAP is used,
due to the -B switch, or a fiemap failure. However,
we use it unconditionally to calculate "expected" for
extN files, so we can end up printing garbage.
Initialize count to 0, and unless we go through the FIBMAP
path, expected will be 0 as well, and in that case do not
print the message.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
in add_subst(), if the malloc of ent->name fails, we goto fail;
which will free ent->name (which is null, so OK) but also free
ent->value (which is uninitialized). There is no case where
we must free ent->value on an error (it is allocated last, and
if it fails it of course doesn't need to be freed) so just
remove it.
Also "retval" is only assigned once to the constant ENOMEM,
so we can just return that explicitly in the failure case.
Signed-off-by: Eric Saneeen <sandeen@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In inode_open(), if the allocation of &io fails, we go to cleanup
and dereference io to test io->name, which is a bug.
Similarly in undo_open() if allocation of &data fails, we
go to cleanup and dereference data to test data->real.
In the test_open() case we explicitly set retval to the only
possible error return from ext2fs_get_mem(), so remove that
for tidiness.
The other changes just make make earlier returns go through
the error goto for consistency.
In many cases we returned directly from the first error, but
"goto cleanup" etc for every subsequent error. In some
cases this leads to "impossible" tests such as:
if (ptr)
ext2fs_free_mem(&ptr)
on paths where ptr cannot be null because we would have
returned directly earlier, and Coverity flags this.
This isn't really indicative of an error in most cases, but
I think it can be clearer to always exit through the error goto
if it's used later in the function.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
old_op is set but never used, because we restore "0"
not old_op. So don't bother with it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The EOPNOTSUPP case is unreachable, being outside a set of:
#if
...
return;
#else
...
return;
#endif
Fix this up so that if neither HAVE_CHFLAGS nor
HAVE_EXT2_IOCTLS applies, we set EOPNOTSUPP.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no need to print out a "bad option" message; getopt
does that for us, and in fact will change "c" to "?" so
it's not even useful.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Specifying the "-n" option to uuidd would incorrectly
fall through to the "-p" case, and assign that number to
the pidfile_path.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using the /* fallthrough */ comment lets Coverity (and humans)
know that we really do want to fall through in these case statements.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
testing fs for NULL in expand_percent_expression():
e2fsck_ctx = fs ? (e2fsck_t) fs->priv_data : NULL;
implies that fs could be NULL, but it's passed to print_pathname()
which defererences it without further testing.
So make this safe by returning "???" for a nul fs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the !undo_io_backing_manager case, undo_err_handler_init
will be passed a null data->real, which will be dereferenced.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If !WORDS_BIGENDIAN, it is pointless to test whether buf
is NULL, because it is initialized to NULL and never changed.
This makes Coverity complain, so we can just move all handling
of "buf" under the #ifdef.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
parse_fs_type explicitly sets usage_types if it is null,
so there is no need to test for null later.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The i++; statement is unreachable; fix same as commit
f1c2eaac535bd9172a35ce39b6d8f392321f274d in util-linux
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The name_len field in ext2_dir_entry is actually comprised of
the name length in the lower 8 bytes, and the filetype in the
high 8 bytes. So in places, we mask name_len with 0xFF to
get the actual length.
But once we have masked name_len with 0xFF, there is no point
in testing whether it is greater than EXT2_NAME_LEN, which
is 255 - or 0xFF. So all of these tests are extraneous.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT2_LIB_SOFTSUPP_INCOMPAT_* are supposed to be bitmasks
of features which can be opened even though they are
under development. The intent is that these are masked
out of the features list, so that they will be ignored
on open.
However, the code does a logical not vs. a bitwise not:
features &= !EXT2_LIB_SOFTSUPP_INCOMPAT;
which will not have the desired effect...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Also cleaned up ext2_fs.h, and improved the byte swapping code so the
extra fields in the large inode are properly byte swapped.
Addresses-Debian-Bug: #641838
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The set_fields commands (set_super_value, set_inode_field,
set_block_group) now handle fields which store in split fields on
ext4's on-disk format. For example, the superblock fields
s_blocks_count and s_blocks_count_hi.
The user can either set the low or high part of the field via
"blocks_count_lo" or "blocks_count_hi", or both parts can be set via
"blocks_count".
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reserve EXT4_FEATURE_RO_COMPAT_METADATA_CSUM and
EXT2_FEATURE_COMPAT_EXCLUDE_BITMAP. Also reserve fields in the
superblock and the inode for the checksums. In the block group
descriptor, reserve the exclude bitmap field for the snapshot feature,
and checksums for the inode and block allocation bitmaps.
With this commit, the metadata checksum and exclude bitmap features
should have reserved all of the fields they need in ext4's on-disk
format.
This commit also fixes an a missing byte swap for s_overhead_blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Amir Goldstein <amir73il@gmail.com>
ext2fs_group_last_block2() already properly calculates
the last block in the last group, so there is no need
to special-case this after the call.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the blocks of a filesystem is a multiple of blocks_per_group,
blocks of the ending group is computed wrongly. Use the
new ext2fs_group_blocks_count() helper instead.
Eric Sandeen: Converted to use new blocks per group helper
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Code to count the number of blocks in the last partial
group is cut and pasted around the e2fsprogs codebase
a few times.
Making this a helper function should improve matters.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If '-n' option is specified there should be no changes made to the file
system hence we should not attempt to discard the file system. This
commit adds a check into the e2fsck_discard_blocks() condition so it skip
discard if E2F_OPT_NO flag is set.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we need to grep, list or just search for failed tests when
running 'make check' which is annoying. This commit simply prints out
the list of failed test names at the end of the output.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If e2fsprogs tools (mke2fs, e2fsck) is run on regular file instead of
on block device, we can use punch hole instead of regular discard
command which would not work on regular file anyway. This gives us
several advantages. First of all when e2fsck is run with '-E discard'
parameter it will punch out all ununsed space from the image, hence
trimming down the file system image. And secondly, when creating an
file system on regular file (with '-E discard' which is default), we
can use punch hole to clear the file content, hence we can skip inode
table initialization, because reads from sparse area returns zeros. This
will result in faster file system creation (without the need to specify
lazy_itable_init) and smaller images.
This commit also fixes some tests that would fail due to mke2fs showing
discard progress, hence the output would differ.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In many places we are using #ifdef HAVE_OPEN64 to determine if we can
use open64() but that's ugly. This commit creates two new helpers
ext2fs_open_file() for open() and ext2fs_stat() for stat(). Also we need
new typedef ext2fs_struct_stat for struct stat.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a slicing-by-8 CRC32c implementation for metadata checksumming.
Adapted from Bob Pearson's kernel patch.
Also added a self-test mechanism so we can verify that the crc32c
implementation is working correctly.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Andreas Dilger