Allow files to be preallocated on-disk up to the next multiple of the
system's page size without complaining about extra blocks.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch instruments the libext2fs unix I/O manager and adds bytes
read/written and data rate to e2fsck -tt pass/overall timing output.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new functions ext2fs_{set,get}_{inode,block}_bitmap_range()
which allow programs like e2fsck, dumpe2fs, etc. to get and set chunks
of the bitmap at a time.
Move the representation details of the 32-bit old-style bitmaps into
gen_bitmap.c.
Change calls in dumpe2fs, mke2s, et. al to use the new abstractions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A recent change to e2fsck_add_dir_info() to use tdb files to check
filesystems with a very large number of filesystems had a typo which
caused us to resize the wrong data structure. This would cause a
array overrun leading to malloc pointer corruptions. Since we
normally can very accurately predict how big the the dirinfo array
needs to be, this bug only got triggered on very badly corrupted
filesystems.
Thanks to Andreas Dilger for submitting the test case which discovered
this problem, and to Kalpak Shah for writing a random testing script
which created the test case.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Recently, one of our customers found this message in pass2 of e2fsck
while doing some regression testing:
"Entry '4, 0x695a, 0x81ff, 0x0040, 0x8320, 0xa192, 0x0021' in ??? (136554) has
rec_len of 14200, should be 26908."
Both the displayed rec_len and the "should be" value are bogus. The
reason is that salvage_directory sets a offset beyond blocksize
leading to bogus messages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
profile_set_default() sets the value of the pseudo file "<default>".
If the file "<default>" had previously been passed to profile_init(),
then def_string parameter will be parsed and used as the profile
information for the "<default>" file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Turkish translation has a bug in it where it has the translation
of "E@e '%Dn' in %p (%i)" to "E@E". This causes @E to be expanded at
@E, recursively, forever, until the stack fills up e2fsck core dumps.
Fix it by stopping after a recursive depth of 10, which is far more
than we need.
Addresses-Sourceforge-Bug: 1646081
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add an extra validity test in check_ext_attr(). If an attribute's
e_value_size is zero the current code does not allocate a region for it
and as a result the e_value_offs value is not verified. However, if
e_value_offs is very large then the later call to
ext2fs_ext_attr_hash_entry() can dereference bad memory and crash
e2fsck.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Jim Garlick <garlick@llnl.gov>
The original code only checked the direct blocks to make sure the
journal inode was sane. Unfortunately, if some or all of the indirect
or doubly indirect blocks were corrupted, this would not be caught.
Thanks to Andreas Dilger and Kalpak Shah for noticing this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the journal inode was corrected from s_jnl_blocks, write the fixed
journal inode back to disk.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
If the journal had been removed because it was corrupt, the
E2F_FLAG_JOURNAL_INODE flag will be set. If this flag is set, then
recreate the filesystem after checking the filesystem.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
This patch changes ext2fs_open() to set EXT2_FLAG_MASTER_SB_ONLY by
default. This avoids some problems in e2fsck (reported by Jim Garlick)
where a corrupt journal can end up writing the bad superblock to the
backups. In general, only e2fsck (after the filesystem is clean),
tune2fs, and resize2fs should change the backup superblocks by default.
Most callers of ext2fs_open() should not be touching anything where the
backups should be touched. So let's change the defaults to avoid
potential problems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Linux floppy driver is a bit different from the other block device
drivers, in that if the device has been opened with O_EXCL, it disallows
another open(), even if the second open() does not have the O_EXCL flag.
So this patch moves the call to ext2fs_get_device_size() so that if it
returns EBUSY, e2fsck can close the filesystem, retry the device size,
and then reopen it. This rather complicated approach is required since
we need to know the blocksize of the filesystem before we can call
ext2fs_get_device_size().
Addresses Debian Bug: #410569
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I've been investigating why e2fsck refuses to restore the backup superblock
of a partition with a broken primary superblock.
The partition in question has a block size of 4096, and mke2fs reports that
backup superblocks were created on blocks 32768, 98304, 163840, ...
When running e2fsck, get_backup_sb starts by guessing a block size of 1024
and backup superblock at block 8193. I'm not sure why, but it actually finds
a superblock at this location, so returns a context with superblock 8193,
blocksize 1024.
Later on, ext2fs_open2() tries to process this superblock. It then realises
that the block size value stored in the superblock (4096) does not match what
it was told (1024), so it bails out with EXT2_ET_UNEXPECTED_BLOCK_SIZE. fsck
aborts without fixing the partition.
The following patch solves the problem by discounting superblocks which do
not meet the currently-sought block size.
As a result, block 32768 (blocksize=4096) is now used to restore the backup,
which agrees with the first location that mke2fs listed.
Signed-off-by: Daniel Drake <d.drake@mmm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
At the second conditional iter->file could still be NULL. We need to
check for it again. Should never happen in practice, but better to be
sure.
Coverity ID: 6: Forward Null
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch removes a code snippet from check_ea_in_inode() in pass1 which checks
if the EA values in the inode are sorted or not. The comments in fs/ext*/xattr.c
state that the EA values in the external EA block are sorted but those in the
inode need not be sorted. I have also attached a test image which has unsorted
EAs in the inodes. The current e2fsck wrongly clears the EAs in the inode.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Mke2fs is supposed to set the uid/gid ownership of the root directory when
a non-rooot user creates the filesystem. This wasn't working correctly
if the uid/gid was > 16 bits. In additional, debugfs wasn't displaying
large uid/gid's correctly. This patch fixes these two programs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Another small bug I think: if the root directory contains shared
blocks, e2fsck pass1c search_dirent_proc() will be looking for
one more containing directory than it will ever find, and thus
loses an opportunity to terminate early.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Fix a problem byte-swapping fast symlinks inodes that contain extended
attributes.
Addresses Red Hat Bugzilla: #232663
Addresses LTC Bugzilla: #27634
Signed-off-by: "Bryn M. Reeves" <breeves@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a typo which could cause e2fsck to throw an I/O error while doubling
checking whether or not a special device file was really an inode.
Also, don't do this tests on symbolic links since for filesystems with a
large numbers of symlinks it could degrade performance and increases the
risk for false positives.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add better ehandler_operation() markers so it is clearer what e2fsck was
doing when an I/O error is reported.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I think this is a small buglet in e2fsck: if a file has multiple hard
links, e2fsck pass1c search_dirent_proc() doesn't maintain its count
properly and may return DIRENT_ABORT before it has found containing
directories for all inodes sharing blocks.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck.conf configures a scratch_files directory which is available,
and the number of directories exceeds scratch_files.numdirs_threshold,
then try to use the tdb library to store the directory information
abstraction. This allows us to check very large filesystems without
needing as much physical memory.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck.conf configures a scratch_files directory which is available,
and the number of directories exceeds scratch_files.numdirs_threshold,
then try to use the tdb library to store the inode count abstraction.
This allows us to check very large filesystems without needing as much
physical memory.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the iterator abstraction and replace e2fsck_get_dir_info() with
e2fsck_dir_info_{set,get}_{parent,dotdot} so that we can support an
on-disk dirinfo implementation. This allows e2fsck to check very large
filesystems on systems with smaller amounts of memory and/or address
space.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is probably only useful in artificial test cases, but it will be
useful if we ever do the "inodes in directory" idea for ext4.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If there is an orphaned inode whose '..' entry is pointing at a special
file, the filetype of the '..' entry will set to the type of the special
file. When the orphaned directory is reconnected to /lost+found, the
filetype of the '..' field is not reset to EXT2_FT_DIR, so a second
e2fsck is required to repair the filesystem.
We address this situation by setting the filetype of '..' when we
reconnect the inode to /lost+found.
Addresses Lustre Bug: #11645
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't assume that a special device is bogus just because i_blocks is
non-zero. The i_blocks field could get adjusted later, and if this
happens it will confuse the e2fsck_process_bad_inode() in pass 2. In
practice true garbage inodes will have random non-zero in
i_blocks[4..15], so there's no point doing the check for an illegal
i_blocks value.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The profile must be freed early if the subsequent memory allocation
fails for 'expanded_filename'.
Coverity ID: 14: Resource Leak
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It is possible that e2fsck_get_dir_info() returns a NULL pointer.
We do not want to blow up when dereferencing p. It seems to be
more sane/safe to call fix_problem(ctx, PR_3_NO_DIRINFO, pctx)
if p is NULL at this point since we do not have any DIRINFO
for pctx->ino.
Also fix another (already existing) error check for
e2fsck_get_dir_info() later in the function so that it reports the
correct inode number if the dirinfo information is not found for
p->parent.
(Both of these are "should-never-happen" internal e2fsck errors that
would indicate a programming bug of some kind.)
Coverity ID: 10: Null Returns
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The dict_lookup() function can potentially return a NULL dnode_t. It is
not checked in two places in the clone_file() function. Looks to be
safe to continue if n is NULL, so just print a warning message and
continue.
Coverity ID: 9: Null Returns
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Found 2 of the three places where a return code for ext2fs_write_inode() was
not being checked.
The second fix in e2fsck/emptydir.c is basically just to shut coverity up even
though it really is unnecessary.
Coverity ID: 1: Checked Return
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change all of the e2fsprogs programs to use the newer add_error_table()
and remove_error_table() interfaces instead of the much older
initialize_*_error_table() function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs and kernel implementation of directory hash tree has a
bug which causes the implementation to be dependent on whether
characters are signed or unsigned. Platforms such as the PowerPC,
Arm, and S/390 have signed characters by default, which means that
hash directories on those systems are incompatible with hash
directories on other systems, such as the x86.
To fix this we add a new flags field to the superblock, and define two
new bits in that field to indicate whether or not the directory should
be signed or unsigned. If the bits are not set, e2fsck and fixed
kernels will set them to the signed/unsigned value of the currently
running platform, and then respect those bits when calculating the
directory hash. This allows compatibility with current filesystems,
as well as allowing cross-architectural compatibility.
Addresses Debian Bug: #389772
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE (0x0008) - change i_blocks to be
in units of s_blocksize units instead of 512-byte sectors, use
l_i_frag and l_i_fsize as i_blocks_hi (could also be part of 64BIT).
E2fsck and debugfs changed to support i_blocks_hi instead of l_i_frag and
l_i_fsize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Badblocks now interprets last_block argument as the last block to check,
instead of the number of blocks to check, to be consistent with the
badblocks man page.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't core dump if there is a corrupt htree interior node. If the block
number is larger than the number of blocks in the directory, don't write
past the end of malloc'ed memory.
Addresses SourceForge Bug: #1512778
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new ext2fs library inline functions in order to calculate
the starting and ending blocks in a block group.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
There were still some %d's lurking when we print blocks & inodes; also
many of the counters in the e2fsck_struct were signed, and probably
need to be unsigned to avoid overflows.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
For loops iterating over all group descriptors, consistently define
first_block and last_block in a way that they are inclusive of the
range, and do not overflow.
Previously on the last block group we did a test of <= first +
dec_blocks; this would actually wrap back to 0 for a total block count
of 2^32-1
Also add handling of last block group which may be smaller.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
For loops such as:
for (i=1; i <= fs->super->s_blocks_count; i++) {
<do_stuff>
}
if i is an int and s_blocks_count is (2^32-1), the condition is never false.
Change these loops to:
for (i=1; i <= fs->super->s_blocks_count && i > 0; i++) {
<do_stuff>
}
to stop the loop when we overflow i
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes some (but not all) of the compatibility bugs which prevented
e2fsprogs from being compiled on a Linux 2.0.35 system. There are still
some unprotected use of long long's, and apparently some type problems
with the uuid library, but these can be fixed up later.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add missing brelse() calls to avoid memory leaks in error paths. (Thanks
to Michael C. Thompson for pointing these out; they were originally
found using Coverity.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The exlcusive device safety check that was added inadvertently broke
e2fsck -cc and mke2fs -cc since e2fsck and mke2fs hold the device
in exclusive access when badblocks is run. So we add a private option
to badblocks, -X, which is passed by e2fsck and mke2fs to badblocks
to indicate that it is OK to skip the EXT2_MF_BUSY checks.
Addresses Debian Bug: #366017
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This feature is initially intended for testing purposes; it allows an
ext2/ext3 developer to create very large filesystems using sparse files
where most of the block groups are not initialized and so do not require
much disk space. Eventually it could be used as a way of speeding up
mke2fs and e2fsck for large filesystem, but that would be best done by
adding an RO_COMPAT extension to the filesystem to allow the inode table
to be lazily initialized on a per-block basis, instead of being entirely initialized
or entirely unused on a per-blockgroup basis.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Integrate profile_std_line() into parse_line(), and profile_parse_file()
into profile_update_file() to make the code use less memory.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the format string(%d, %ld) for a block number and inode number
to %u or %lu.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Thanks to Andreas Dilger for this idea. If the filesystem is not mounted,
e2fsck will open it in exclusive mode to prevent the a confused/careless
system administrator from mounting the filesystem while the filesystem
check is taking place, which could cause all sorts of problems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check to see if the superblock hint for the external journal needs to
be updated, and if so, offer to update it. (Addresses Debian Bug:
#355644)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
(This was an artifact of the migration of the sources from BitKeeper
to Mercurial; mea culpa, mea maximum culpa --- Ted)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Whether fs checks are skipped when the system is running on battery can be
controlled by the new e2fsck.conf option defer_check_on_battery (this option
defaults to TRUE).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On Sat, Jan 28, 2006 at 12:53:33PM -0600, Fredrick Knieper wrote:
> Package: e2fsprogs
> Version: 1.38+1.39-WIP-2005.12.31-1
>
> When running fsck at boot or when running e2fsck manually on a device,
> fsck will not check a filesystem based on the maximum mount count,
> unless a flag such as -f or -c is used to force the filesystem check.
What's happening is that when you run on battery, e2fsck will delay
running the filesystem check, on the assumption that it is better to
defer the check until some time in the future when your laptop is
running on AC mains again. This deferral is not infinite, however; if
the number of mounts exceeds twice the max mount counts, or if the
interval between checks exceeds twice the check interval, e2fsck will
force the check even though you are on battery.
I've changed the sources to print a message to make this more clear.
Addresses Debian Bug: #350306
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This also changes syntax accepted by the profile parser. The value of
profile relations must not contain spaces unless it is quoted;
otherwise the parser will throw an error. Previously something like
this was allowed:
[liboptions]
test = foo bar
Now, the relation must be in double quotes in order to be valid, i.e.,
"foo bar".
Comments are allowed anywhere and can be started with either a ';' or
a '#' character. The only place where comments will not be intepreted
as beginning a comment is in a quoted string.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck will now report syntax errors in /etc/e2fsck.conf intead of simply
ignoring the config file when there are errors.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unified batchmode and command-line handling.
profile_is_node_final() and profile_find_node_relation() are static,
unused functions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix #include of com_err.h so that it isn't required that the com_err
development environment be installed. (Addresses Debian Bug: #345519)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the ability for the e2fsck configuration file to override the
behaviour of e2fsck when a particular filesystem problem is
encountered. This allows reconnecting an inode to lost+found to not
stop the boot sequence, if a system administrator really badly wants
this behaviour for some specialized reason, for example.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also, use this environtment variable to make sure that a local
/etc/e2fsck.conf file will not interfere with the regression test
suite.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the e2fsck configuration file sets the allow_cancellation option to be
true, then if the filesystem does not have any known problems, and was
known to be cleanly unmounted, then let e2fsck exit with a status code of 0
instead of 32 (FSCK_CANCELED) so that the bootup scripts will continue
without stopping the boot. (Addresses Debian Bug: #150295)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The profile library was originally written by Theodore Ts'o in 1995
for use in the MIT Kerberos v5 library. It has been
modified/enhanced/bug-fixed over time by other members of the MIT
Kerberos team. This version was originally taken from the Kerberos
v5 distribution, version 1.4.2, and radically simplified for use in
e2fsprogs. (Support for locking for multi-threaded operations,
being able to modify and update the configuration file
programmatically, and Mac/Windows portability have been removed.
It has been folded into a single C source file to make it easier to
fold into an application program.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the superblock last mount time or last write time is in the future, fix
this automatically if e2fsck is in preeen mode, since Debian's boot sequence
bogusly doesn't set the time correctly until potentially very late in the bootup
process, and this can cause false positives that will cause users' systems
to fail to booting. (Addresses Debian Bugs #343662 and #343645)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A user was confused about whether or not e2fsck -c performed a destructive
test on the filesystem, since it stated that -cc resulted in a non-destructive
read/write test. Clarify that -c does a read/only test.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't let the user run e2fsck -ccn on the root partition, without warning
that he or she might be doing something Really Stupid.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Detect if the superblock's last mount field or last write field is in
the future, and offer to fix if so. (Addresses Debian Bug #327580)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't do a structure copy via an assignment in e2fsck's pass #1 when
it is a no-op in order to avoid false positives from valgrind.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This was actually caused by two bugs. The first bug is that if the
inode has been fully fixed up, the code will attempt to remove the
inode from the inode_bad_map without checking to see if this bitmap is
present. Since it is cleared at the end of pass 2, if
e2fsck_process_bad_inode is called in pass 4 (as it is for
disconnected inodes), this would result in a core dump.
The first bug was mostly hidden by a second bug, which caused
e2fsck_process_bad_inode() to consider all inodes without an extended
attribute to be not fixed.
Note: This bug was introduced in e2fsprogs 1.36.
(Addresses Debian Bug: #316736)
easier to understand (sorry, translators).
Add new @m (multiply-claimed) and @n (invalid) expansions for e2fsck
problem descriptions.
Add Dutch translation, and update French translation.
Add an explanation of how the @-expansion and %-exapansion works in
e2fsck/problem.c to make life easier for the translators.
Synchronize and update po files.
and changes "bad" to "invalid" in some messages to avoid confusion with
"bad blocks" in the e2fsck, mke2fs, and badblocks programs. Thanks to
Benno Schulenberg. (Addresses Sourceforge Bug: #1189803)
stored in inodes into e2fsck.
There are a number of bug fixes and enhancements over the original lustre fsck
BK repository. The biggest one is that this extended attribute values must
be aligned on 4-byte boundaries.
a new inode we make sure that the extra information in the inode (any extra
fields in a large inode and any ea-in-inode information) is cleared. This
can happen when e2fsck creates a new root inode or a new lost+found directory,
or when the user uses the debugfs write, mknod, or mkdir commands. Otherwise,
the newly create inode could inherit garbage (or old EA information) from
a previously deleted inode.
we changed ext2fs_create_resize_inode to always create the resize inode,
even when s_reserved_gdt_blocks is zero. Mke2fs and e2fsck was calling
ext2fs_create_resize_inode() unconditionally, and depending on
s_reserved_gdt_blocks to be zero, instead of explicitly checking the
resize_inode feature.
as well as the filesystem-wide inode and block free counts. If any of the
free counts is too large, force a full filesystem check. (Addresses
Debian Bug #291571)
enabled, but s_reserved_gdt_blocks is zero and there is no double indirect
block in the resize inode. If there are no blocks reserved for on-line
expansion, there is no need for the DIND block to be allocated in the resize
inode.
autoconf 2.13 version of AC_CHECK_TYPE. Otherwise, on some platforms
intptr_t might get erroneously #define'd to be long. (Addresses
Debian Bug #289133)
byte-swapping options to e2fsck. This was the cause of some hard to
reproduce problems that had been reported in the past, and which the
resize_inode changes tickled in a much more repeatable fashion.
resize_inode capability disabled, but which still have the
s_reserved_gdt_blocks field set in the superblock, or which
still have blocks in the inode #7 (the resize inode).
correctly.
Update Makefile dependencies.
Update "make depend" production so that it filters out comments
inserted by newer gcc compilers.
Remove sync from e2fsck's "make all" target.
example, /tmp/test.img?offset=1024. Multiple options can separated using
the & character, although at the moment the only option implemented is
the offset option in the unix_io layer.
some generated files, by having subst update the modtime on these
files even when the generated file hasn't changed. We do this with
generated files that do not have any downstream dependencies.
incorrectly treat as valid symlinks created with SE Linux
(Debian bug #228723) as well as failing the f_journal test case on
big endian systems due to the backup journal blocks not being swapped.
need to create a lost+found directory. This may
invalidate our pointer to the directory information, so we
must look it up again after calling
e2fsck_reconnect_file(). (Addresses Debian bug #219640).
E2F_FLAG_RESTARTED. This fixes a bug where if the user
specifies an alternate superblock, and the journal needs
to be replayed, e2fsck would erroneously assume that
journal had been run already without clearing the
NEEDS_RECOVERY flag, and bomb out with an error.
a filesystem check if a laptop system reports it is running on
battery. This way the laptop will be biased to waiting until
it is on AC power before doing a filesystem check. (Addresses
Debian bug #205177)
problem.c (PR_1_BB_FS_BLOCK, PR_1_BBINODE_BAD_METABLOCK_PROMPT):
Fix up the handling of corrupted indirect blocks in the
bad block. We now correctly handle the case where there
is an overlap between a block group descriptor or
a superblock and a bad block indirect block. In the case
where the indirect block is corrupted, we now suggest
"e2fsck -c".
the superblock and block group descriptors into two functions:
ext2fs_reserve_super_and_bgd, found in lib/ext2fs/alloc_sb.c, and
ext2fs_super_and_bgd_lock, found in lib/ext2fs/close.c.
Change e2fsck/pass1.c (mark_table_blocks), lib/ext2fs/closefs.c
(ext2fs_flush), lib/ext2fs/initialize.c (ext2fs_initialize),
and misc/dumpe2fs.c (list_desc) to use these functions.
e2fsck/ChangeLog
pass1.c (mark_table_blocks): Use the new function
ext2fs_reserve_super_and_bgd to calculate the blocks to be
reserved.
lib/ext2fs/ChangeLog
closefs.c (ext2fs_super_and_bgd_loc): New function which
centralizes the calculation of the superblock and block
group descriptors.
(ext2fs_flush): Use ext2fs_super_and_bgd_lock to figure
out where to write the superblock and block group
descriptors.
alloc_sb.c (ext2fs_reserve_super_and_bgd): New function which
reserves space in the block bitmap using
ext2fs_super_and_bgd_loc.
initialize.c (ext2fs_initialize): Use
ext2fs_reserve_super_and_bgd to initialize the block bitmap.
misc/ChangeLog
dumpe2fs.c (list_desc): Use ext2fs_super_and_bgd_loc to
determine the locations of the superblock and block group
descriptors.
superblock. E2fsck will automatically save the journal information
in the superblock if it is not there already, and will use it if the
journal inode appears to be corrupted. ext2fs_add_journal_inode()
will also save the backup information, so that new filesystems
created by mke2fs and filesystems that have journals added via
tune2fs will also have journal location written to the superblock as
well. Debugfs's logdump command has been enhanced so that it can
use the journal information in the superblock.
The debugfs man page has been improved to more fully describe the
logdump command.
Added two new functions, ext2fs_file_open2() and
ext2fs_inode_io_intern2() which take a pointer to an inode structure;
this is needed so that e2fsck and debugfs can synthesize a
fake journal inode and use it to access the journal.
e2fsck_simple_progress): Don't print the ^A and ^B
characters which bracket the progress bar when the e2fsck
program is talking directly to a tty, but only when it is
being piped to another program. (Addresses Debian bug
#204137)
unix.c: Move some initialized variables to the BSS segment to
shrink the size of the e2fsck executable.
tune2fs to use the test I/O manager.
The test I/O manager has been changed to not do anything extra by
default, unless the TEST_IO_FLAGS and/or TEST_IO_BLOCK environment
variables are set, which controls what I/O operations are logged and
a block number to watch, respectively. The log messages are sent to
stderr by default, unless a filename is specified via the
TEST_IO_LOGFILE environment variable.
Fix typo's in README.subset
Change debian control file so it doesn't bomb out if the EVMS FSIM
is not there, since it is not built on the Hurd. Resolves Debian
bug #189687.
* Change e2fsck to bracket its progress bar output with ctrl-A and ctrl-B
characters, so that logsave -s can omit writing the progress bar output
to the log file.
inode counters from the block group specific counters
quietly. This is needed for an experimental patch which
eliminates locking the entire filesystem when allocating
blocks or inodes; if the filesystem is not unmounted
cleanly, the global counts may not be accurate.
a single directory block (because this is the easy case;
we don't currently check for duplicates that span
directory blocks, for now. Eventually for htree
directories we can do this by searching for all directory
blocks that have a hash overflow, and then searching the
adjacent blocks to find all other potential duplicates.)
code accidentally had the INDEX_FL backwards compatibility code
removed. E2fsck will now fix HTREE corruptions in preen mode, and
mke2fs will not create filesystems with the dir_index flag set
by default. (The user has to specifically request it.)
When byte-swapping a filesystem on a PPC architecture, byte-swap
the bitmaps since the historical big-endian ext2 variant had
byte-swapped bitmaps, and the ext2fs library assumes this. Otherwise
the regression test suite will fail...
Add additional checks to HTREE directories. We now check the count
and limit fields in the htree header, as well as assuring that the
hash table in each interior node is in ascending order. We also
check to make sure all leaf nodes are have the expected depth in
the tree.
Updated test cases to deal with all of the above.
to determine whether or not a directory entry is a
completely empty leaf block or leaf node. Otherwise
e2fsck might get confused into thinking that a valid dxdir
was corrupted.
directories.
Speed up e2fsck slightly by only updating the master superblock;
there is no point to update the backup superblocks.
Fix a small bug in the rehashing code which could leave the indexed
flag set even after the directory was compressed instead of indexed.
(Not fatal, since the kernel will deal with this, but technically
it filesystem isn't consistent, and the filesystem will be marked
as being in error when the kernel comes across the directory. It
should also never happen in real life, since directories that small
will never be indexed, but better safe than sorry.)
Also change the threshold of when directories are indexed, so that
directories of size 2 blocks will be indexed. Otherwise they will
never be indexed by the kernel when they grow.
using a non-zero hash version (i.e., half MD4 or TEA hash).
The hash version wasn't getting copied into dx_dir->hashversion and
this caused the kernel to treat all directories if they were using the
legacy hash, which was Bad.
make sure we gracefully clean up and only exit at safe points.
For fsck, we pass the SIGINT/SIGTERM signal to the child processes,
so they can do their own cleanup.
8192-byte and 16384-byte blocksize filesystems.
Change the default bytes-per-inode ratio of a new filesystem to be at most
one inode per block for large blocksizes.
would cause i_size to be too big), and offer to truncate the inode.
Remove old bogus i_size checks.
Add test case which tests e2fsck's handling of large sparse files.
Older e2fsck with the old(er) bogus i_size checks didn't handle
this correctly.
.cvsignore in include/asm directory so it can disappear. Updated
makefile dependencies, and stop including <topsrc>/include in the
-I search path, since it's no longer needed.
a read/write test on the disk. Update the man pages to encourage
using the -c option, and to discouraging running badblocks separately,
since users tend to forget to set the blocksize when running
badblocks.
- Renamed linux/list.h to be linux/linked_list.h to work around a
problem caused by diet libc insistence to search the kernel
header files ahead of all other files in the include path,
including the user specified include files.
- Worked around a bug in diet libc which core dumps when using
putc with stderr by using fputs instead. As a bonus, this
also shaved a few bytes off of com_err.o.
- Fixed a real bug in debugfs which was detected because diet libc
was more sensitive than glibc when incorrectly using fclose()
where pclose() is required.
or allocation bitmap is zero, that it is marked as
invalid, so that in pass #1, a new bitmap/inode table gets
properly allocated. (Addresses Debian Bug #116975)
V2 fields are set on a V1 journal superblock, or an
internal V2 journal has s_nr_users is non-zero, clear the
entire journal superblock beyond the V1 superblock. This
fixes botched V1->V2 updates.
problem.c, problem.h (PR_0_CLEAR_V2_JOURNAL): Add new problem code.
f_bad_local_jnl: New test which tests for a V2 journal with bad
fields caused by a botched V1->V2 upgrade.
which will automatically relocate the ext3 journal from a
visible file to an invisible journal file if the
filesystem has been opened read/write.
super.c (check_super_block): Add call to e2fsck_move_ext3_journal
problem.c, problem.h (PR_0_MOVE_JOURNAL, PR_0_ERR_MOVE_JOURNAL):
Add new problem codes.
any sectors in the same filesystem block after the superblock.
The latter will remove (for example) swapspace signatures
on 4kB+ blocksize filesystems. Also when zeroing the "end"
of the filesystem don't actually zero the start of a very
small device (less than 128kB).
Andreas's symlink code; check_blocks() was unconditionally testing
inode_bad_map without checking to see if it existed first. Fixed
problem a different way; we now no longer check inode_bad_map at all,
since the file might not get deleted in pass 2 anyway. We move the
large file feature reconciliation code to to e2fsck_pass2(), and in
deallocate_inode() in pass2.c, we decrement the large files counter if
we're about to delete a large file.
unconditional ext2_flush() call. Also made ext2_flush() more
efficient when the superblock is modified after the filesystem has
been flushed, and make it clear the superblock dirty flag
after doing the superblock/block group descriptor flush.
field calculation so that it only counts EA block entries
as a single multiply claimed block (since once we clone
the EA blocks for one inode, we fix the problem for all of
the other inodes). Also, I moved the num_bad calculation
from process_pass1b_block to the end of pass1b. This
fixes a *significant* performance bug in pass1b which hit
people who had to had a lot of multiply claimed blocks.
(Can you say O(n**3) boys and girls? I knew you could...
Fortunately, this case didn't happen that much in actual practice.)
block for later processing to avoid extra seeks across the disk.
(process_inode_cmp): If there is no indirect block, sort by the
extended attribute (i_file_acl) block.
blocks. Moved free of block_buf to after the code which clones the
extattr block, and fixed logic for changing pointers to the extended
attribute field in the inodes which were affected.
(decrement_badcount): New function which is used whenever we need to
decrement the number of files which claim a particular bad block.
Fixed bug where delete_file wasn't checking check_if_fs_block() before
clearing the entry in block_dup_map. This could cause a block which
was claimed by multiple files as well as the filesystem metadata to
not be completely fixed.
unix.c (check_if_skip): Adapted patch from Andreas Dilger which prints
the number of mounts or days elapsed since the last check when e2fsck
is forced to check an otherwise clean filesystem.
dumpe2fs.c: Use WORDS_BIGENDIAN to determine whether or not we're
(not) using i386 byte order.
dumpe2fs.c, mke2fs.c: Stop using the compatibility badblocks function,
and use the ext2fs_badblocks_* functions instead.
ChangeLog, inode.c, tst_iscan.c:
inode.c, tst_iscan.c: Stop using the compatibility badblocks function,
and use the ext2fs_badblocks_* functions instead.
ChangeLog, badblocks.c:
badblocks.c: Stop using the compatibility badblocks function, and use
the ext2fs_badblocks_* functions instead.
Makefile.in, gen_bitmap.c, bitops.h: Move inline functions
ext2fs_mark_generic_bitmap and ext2fs_unmark_generic_bitmap to
gen_bitmap.c as normal functions. (This saves space and doesn't
significantly change the speed of e2fsck on a P-III.)
ChangeLog:
Add missing log entry for unix.c.
Makefile.in: Add message.c and swapfs.c to the list of source files to
build the make depend.
swapfs.c, unix.c: Only support the -s and -S options to e2fsck if
ENABLE_SWAPFS is defined.
Many files:
ext2fs.h, bitops.h, block.c, bmap.c, closefs.c, dirblock.c, inode.c,
native.c, openfs.c, rw_bitmaps.c, swapfs.c: Only include the
byte-swapping logic if ENABLE_SWAPFS is turned on or if we're on a
big-endian machine.
initialize.c (ext2fs_initialize):Use WORDS_BIGENDIAN directly to set
EXT2_FLAG_SWAP_BYTES, instead of using ext2fs_native_flag.
native.c (ext2fs_native_flag): Use WORDS_BIGENDIAN provided by
autoconf to determine whether or not return EXT2_FLAG_SWAP_BYTES.
pass1.c (mark_inode_bad): Replace alloc_bad_map with a function which
sets the bit in the bad inode bitmap.
(e2fsck_pass1): Check for fast symlinks with an invalid size, and set
the bad inode map in that case.
pass2.c (e2fsck_process_bad_inode): Check for fast symlinks with an
invalid size and prompt the user if the inode should be cleared.
problem.h, problem.c (PR_2_SYMLINK_SIZE): Added new problem code.
problem.c, problem.h: Change PR_0_JOURNAL_UNSUPP_INCOMPAT and
PR_0_JOURNAL_UNSUPP_ROCOMPAT so they aren't fatal errors, but prompt
to see if the user should abort. Removed the
PR_0_JOURNAL_RESET_COMPAT problem code.
journal.c (e2fsck_journal_load): If there are incompatible journal
flags, just return an error code.
(e2fsck_check_ext3_journal): If e2fsck_journal_load returns an error
code indicating that there are incompatible journal flag, check to see
if we should abort, and then offer to clear the journal.
Makefile.in: Move include/asm/types.h.in to lib/ext2fs/ext2_fs.h.in.
wordwrap.pl: Add some rules which help fix up the dependencies.
Many files:
Move include/asm/types.h.in to lib/ext2fs/ext2_fs.h.in.
pass1.c (pass1_get_blocks, pass1_read_inode, pass1_write_inode,
pass1_check_directory): Add a safety check to make sure
ctx->stashed_inode is non-zero.
pass1b.c (pass1b): Use e2fsck_use_inode_shortcuts() to disable the
inode shortcut processing, instead of manually clearing only half of
the function pointers that needed to be NULL'ed out. This caused
nasty bugs if the last inode in the filesystem needed dup block
processing.
pass1b.c (clone_file_block): When cloning a directory's metadata
block, don't try to update the directory block list database, since
indirect blocks aren't stored in the database and the resulting error
will abort the file clone operation.
journal.c (e2fsck_journal_reset_super): Fix bug; the reset journal
wasn't getting written out to disk since the dirty bit wasn't being
set on the buffer.
(e2fsck_journal_load): Don't print an error message if the journal
version number is wrong; just return a error code reflecting this
fact. If the block type in the journal superblcok is obviously not a
version number, report the journal is corrupted.
(e2fsck_check_ext3_journal): On an unsupported journal version, prompt
to abort by default, but then offer a chance to clear the journal as
corrupt.
problem.c, problem.h (PR_0_JOURNAL_UNSUPP_VERSION): Added new problem code.
pass1.c: Treat inodes with a low dtime (that were from a corrupted
orphan list) specially.
problem.c, problem.h: Add new problem codes PR_1_LOW_DTIME and
PR_1_ORPHAN_LIST_REFUGEES, and a new latch group, PR_LATCH_LOW_DTIME.
problemP.h: Expand the size of the problem flag to be an int instead
of a short. Expand space in the flag word which is reserved for
problem latch flags from 3 bits to 8 bits.
ChangeLog, expect.1, expect.2, image.gz, name:
f_badorphan: New test which verifies corrupted orphan list handling.
badblocks.c, chattr.c, dumpe2fs.c, e2image.c, findsuper.c, lsattr.c,
mke2fs.c, mklost+found.c, tune2fs.c, util.c: Change location of
ext2_fs.h to be ext2fs/ext2_fs.h
ChangeLog, Makefile.in, resize2fs.h:
resize2fs.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h
ChangeLog, Makefile.in, debugfs.h:
debugfs.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h
ChangeLog, Makefile.in, e2fsck.h, scantest.c:
e2fsck.h, scantest.c: Change location of ext2_fs.h to be
ext2fs/ext2_fs.h
ChangeLog, Makefile.in, tst_uuid.c, uuid_time.c:
tst_uuid.c, uuid_time.c: Remove unneeded #include of ext2_fs.h
ChangeLog, Makefile.in, e2p.h:
e2p.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h
ChangeLog, Makefile.in, test_icount.c, test_rel.c:
test_icount.c, test_rel.c: Change location of ext2_fs.h to be
ext2fs/ext2_fs.h
super.c (check_super_block): Be more strict on checking
s_r_blocks_count superblock field.
problem.c, problem.h (PR_0_JOURNAL_UNSUPP_ROCOMPAT,
PR_0_JOURNAL_UNSUPP_INCOMPAT, PR_0_JOURNAL_RESET_COMPAT): New problem
codes.
journal.c (e2fsck_journal_load): Use a problem code to report
unsupported feature flags. There is code to clear unsupported flags,
but since this is dangerous, it's not allowed in the problem code
table.
journal.c (e2fsck_journal_reset_super): initialize the journal
sequence number to a random value to avoid recovering bad transactions
from a corrupt journal.
util.c (fatal_error): Use the correct magic number when checking the
magic number for the io_channel data structure. Also remove
extraneous call to io_channel_flush() that was left over from an
editing session.
super.c (check_super_block): Fix bad calculation of inodes_per_block,
and tighten min/max checks to be a bit more paranoid. Thanks to
Andreas Dilger for pointing out this bug.
pass1.c (check_blocks): Fix large file checking code so that files >
2GB are considered large files, and restrict directories from being >
2GB.
version.h:
Update for WIP release.
pass1.c (e2fsck_pass1): Cap the maximum legal size of a file by the
limit caused by the fact that i_blocks is in 512 byte units, and that
the Linux buffer cache also fundamentally assumes 512 byte sectors.
Make sure that the journal inode is a regular file, and when clearing
an unused journal inode, make sure the icount db is updated.
problem.c, problem.h (PR_1_JOURNAL_BAD_MODE): Add new problem code.
ChangeLog, journal.c:
journal.c (e2fsck_journal_fix_unsupported_super): Remove unused
function. Add FIXME notes to e2fsck_get_journal(), from Andreas
Dilger.
problem.c: For PR_1_RESERVED_BAD_MODE, print a description of the
reserved inode. In PR_0_JOURNAL_HAS_JOURNAL, prompt to clear the
journal, rather than deleting it (which is more accurate). (From
Andreas Dilger.)
journal.c: Make sure all functions which return an error code use the
errcode_t return type, and not "int"
(e2fsck_journal_release): Add new parameter, "drop", which is used
when we just want to deallocate the journal without trying to write
out any changes.
(mark_buffer_clean): New function e2fsck_check_ext3_journal): If we
fail loading the journal, make sure we free all memory associated with
it.
(recover_ext3_journal): If we fail to load the journal or initialize
the revoke data structures, make sure we free all memory associated
with the journal.
super.c: Minor whitespace cleanups, from Andreas Dilger.
mtrace.h:
mtrace.h: Minor whitespace cleanups, from Andreas Dilger.
ChangeLog, message.c:
message.c (special_inode_name): Add more special inode names (From
Andreas Dilger)
journal.c (e2fsck_journal_fix_bad_inode): Set pctx->ino to the bad
journal number.
problem.c (PR_0_JOURNAL_BAD_INODE): Use pctx->ino instead of pctx->num
when printing the bad journal inode number.
iscan.c, unix.c, e2fsck.h: Don't use NOARGS, and use
ext2fs_sync_device() instead of using BLKFLSBUF.
flushb.c: Don't use NOARGS anymore; everything is STDC these days.
ChangeLog, pass1.c:
pass1.c (process_block): Remove dead code which was never getting
executed.
journal.c, pass1.c, pass1b.c, pass3.c, recovery.c, revoke.c, super.c,
unix.c, util.c: Fix random gcc -Wall complaints.
jfs_user.h: Use more sophisticated inline handling to allow building
with --enable-gcc-wall
pass1.c (e2fsck_pass1): Moved journal inode handling out to its own
block; if the journal inode is not in use, and it contains data, offer
to clear it.
problem.h, problem.c (PR1_JOURNAL_INODE_NOT_CLEAR): Add new problem
code.
problem.c: Modified problem table to use a new abbreviations.
journal.c (e2fsck_check_ext3_journal): Force a fsck if we remove the
journal stored on a reserved inode. Also force a fsck if the journal
appears to exist while !NEEDS_RECOVERY, and we forcibly reset the
journal.
journal.c, pass1.c, super.c, unix.c: Replace use of struct ext2fs_sb
with struct ext2_super_block.
ChangeLog, debugfs.c:
debugfs.c Replace use of struct ext2fs_sb with struct ext2_super_block.
ext2fs.h: Cleaned up header file by removing definitions of feature
flags that might not have been defined in older ext2 header files.
Now that we're using our own include/linux/ext2fs.h header file, this
can never happen.
jfs_dat.h: Removed old header file which is no longer needed.
ChangeLog:
jfs_compat.h: Remove uneeded header file.
problem.h: Fixed numbering of pass1 error messages; an extra 0 had
slipped into some of the numbers. (Pointed out by Andreas Dilger)
journal.c (e2fsck_journal_fix_corrupt_super): Clean up unnecessary
automatic variable. Add explanatory comment about the kernel
emulation routines. (Suggested by Andreas Dilger)
super.c (release_orphan_inodes): Fix spelling typo in error message.
ChangeLog, unix.c:
unix.c (main): Clarify coments (no code changes)
ChangeLog, journal.c:
journal.c (e2fsck_check_ext3_journal): Check to make sure the journal
fields are consistent if any of the superblock fields are set. (Backs
out erroneous change made by sct, pointed out by Andreas.)
super.c (check_super_block): If we have any of the compatibility flags
set, we need to have a revision 1 filesystem. Most kernels will not
check the flags on a rev 0 filesystem and we may have corruption
issues because of the incompatible changes to the filesystem. Patch
from Andreas Dilger.
flushb.c: Fix flushb so that it does something other than waste disk
space when built on systems with modern header files and add a
non-subtle Copyright Licensing restriction so Yann will remove it from
the Debian Distribution. (Now violates the Debian Free Software
Guidelines, on purpose.)
jfs_e2fsck.h, jfs_user.h: Replaces jfs_compat.h. The jfs.h file has
been moved to the include/linux directory.
journal.c, revoke.c, recovery.c: Updated files from Stephen to support
the V2 superblock and revoke processing. The journal.c and revoke.c
files are copies from the ext3 kernel source.
Makefile.in: Added revoke.c to the list of source/object files.
Makefile.in:
Fix up some mistakes in the source file list, and regenerate the
dependencies.
Update Makefile dependencies.
ChangeLog, jfs.h:
jfs.h: Remove excess #include of JFS_DEBUG. Not needed for e2fsprogs,
since we optioanlly define it in the configuration file system.
pass1b.c: Change routines to use PR_1B_BLOCK_ITERATE when reporting
problems rather than using com_err directly.
problem.c, problem.h (PR_1B_BLOCK_ITERATE): Add new problem code.
message.c (expand_percent_expression): Add safety check. If ctx->str
is NULL, print "NULL" instead of dereferencing the null pointer.
pass1b.c, pass2.c, pass3.c: Change calls to ext2fs_block_iterate to
ext2fs_block_iterate2, to support 64-bit filesizes and to speed things
up slightly by avoiding the use of the ext2fs_block_iterate's
compatibility shim layer.
version.h:
Update for WIP release.
jfs.h, jfs_compat.h, journal.c: Updated to include the definition of
the new journal superblock format; still only supports V1 superblocks
for now. (From sct)
super.c (release_inode_block, release_inode_blocks,
release_orphan_inodes): Add code to deal with truncating inodes which
are still in use (but which are on the orphan list because they need
truncation).
problem.c, problem.h: Rename PR_0_CLEAR_ORPHAN_INODE to
PR_0_ORPHAN_CLEAR_INODE, and remove PR_0_ORPHAN_INODE_INUSE.
journal.c (e2fsck_run_ext3_journal): Add i18n support, and print a
message when the journal is being recovered.
jfs_compat.h (J_ASSERT):
journal.c (e2fsck_run_ext3_journal):
pass3.c (adjust_inode_count): Use fatal_error() instead of exit().
ChangeLog, super.c:
super.c (release_orphan_inodes): Fix typo; should do bounds checking
on next_ino instead of ino.
unix.c: Use fatal_error() instead of exit() whenever possible. Also
fix the fsck exit codes so that we use FSCK_USAGE when it is
appropriate. Rename global_signal_ctx to e2fsck_global_ctx and let it
be exported globally.
journal.c (e2fsck_journal_load): Fix **nasty** bug which caused
e2fsck_check_ext3_journal to smash the journal because
journal->j_transaction_sequence wasn't getting initialized.
journal.c: (recover_ext3_journal, e2fsck_run_ext3_journal): Move call
to e2fsck_clear_recover from recover_ext3_journal to after the
filesystem has been closed and reopened. Otherwise, the superblock in
the filesystem handle will probably be stale, and will overwrite the
newer version of the superblock written by the log recovery.
message.c (expand_inode_expression): Add support for %Iu and %Ig
problem.h (PR_0_CLEAR_ORPHAN_INODE): Add new problem code.
super.c (release_orphan_inodes, release_inode_block,
release_inode_blocks): Update the block group descriptor counts when
freeing the orphan inode. Use PR_0_CLEAR_ORPHAN_INODE to report when
we clear an orphan.
journal.c (e2fsck_run_ext3_journal): Fix a bug where we attempted to
reopen the filesystem using the device name instead of the filesystem
name.
Makefile.in: Update the make dependencies
problem.c, problem.h: Add the problem codes:
PR_0_ORPHAN_ILLEGAL_BLOCK_NUM, PR_0_ORPHAN_ALREADY_CLEARED_BLOCK,
PR_0_ORPHAN_ILLEGAL_HEAD_INODE, PR_0_ORPHAN_ILLEGAL_INODE,
PR_0_ORPHAN_INODE_INUSE
super.c (release_inode_blocks, release_orphan_inodes,
check_super_block): Add support for clearing orphaned inodes from the
unmounted filesystem.
journal.c (e2fsck_recover_ext3_journal): Remove the last orphan check;
this is now handled in check_super_block --- non-journaled filesystems
can use the orphan list in the future. Also, move the the re-opening
of the filesystem to e2fsck_run_ext3_journal().
debugfs.c:
debugfs.c (finish_range): Make sure the pager FILE pointer to use.
configure, configure.in, ChangeLog:
configure.in (JFS_DEBUG): Add support for --enable-jfs-debug
journal.c: implement loading of ext3 journal for recovery code
problem.c (fix_problem): return answer from PR_AFTER_CODE to caller.
Add journal problems.
recovery.c (journal_recover): user-space ext3 journal recovery code
unix.c (main) : check journal and do recovery in separate steps
jfs.h, recovery.c: Files ext3 kernel code.
jfs_compat.h: Compatibility header file to allow kernel code to be
linked to e2fsck.
Commit this file for future use; contains a configure.in script for when
libuuid gets separtead out into its own package.
libext2fs.texinfo:
Update version numbers for 1.19 release.
TODO:
Commit TODO list for 1.19 release.
README:
Update file for 1.19 release.
ChangeLog, e2fsprogs.spec:
e2fsprogs.spec: Merge in a few changes from the Red Hat 6.2 spec file,
now that we're using a modern rpm to build e2fsprogs. Also updated
version number to 1.19.
version.h:
Update version number for 1.19 release.
ChangeLog:
Check in changes for 1.19 release.
unix.c (check_if_skip): Modify algorithm for checking s_max_mnt_count
to match with the kernel. (If s_max_mnt_count is negative, ignore the
mnt_count check.)
unix.c (e2fsck_update_progress): Adjust the width of the progress bar
dynamically, based on the filesystem name that we need to display.
unix.c (main): If the ext3 needs_recovery flag is set, call
e2fsck_run_ext3_journal() and then restart the e2fsck run.
journal.c (e2fsck_run_ext3_journal): New file which contains logic to
recover the ext3 journal. This version relies on the kernel being
able to mount the filesystem in order to run the journal.
Makefile.in (install): Install resize2fs in /sbin, not /usr/sbin.
ChangeLog, unix.c:
unix.c: Also, re-arrange the logic so that we do the time check only
after doing the percentage check, and we only advance the spinner if
we're about to display it.
ChangeLog:
Fix minor wording error in Chagelog.
unix.c (e2fsck_update_progress): Only save and check the last
percentage after multiplying it by 10, nor 1000, since we only need to
save values to a tenth of a percent (and the percentage is already
from 0 .. 100%, not 0 .. 1).
pass1.c (e2fsck_pass1): Check to see if the ext3 s_last_orphan field
is set; if so, clear it, so that ext3 mounting code won't get confused
by the fact that we've cleared out the orphaned inodes.
pass5.c (check_block_bitmaps, check_inode_bitmaps): Add error checking
for a "should never happen case".
problem.c, problem.h (PR_5_COPY_IBITMAP_ERROR,
PR_5_COPY_BBITMAP_ERROR): Add new error codes.
pass1.c (pass1, check_size): Apply patch from Chris Wedgewood
(cw@foof.org) which checks to see if special devices have a non-zero
size, and deals with it.
problem.c, problem.h (PR1_SET_NONZSIZE): Add new problem code.
getsize.c: Under linux, manually define the ioctl for BLKGETSIZE if it
isn't already defined and it's safe to do so.
.cvsignore:
Ignore build files when builddir==srcdir
Makefile.in (install): Create a symbolic link for fsck.ext3 as well.
ChangeLog, e2fsprogs.spec:
e2fsprogs.spec (fsck.ext3): Add /sbin/fsck.ext3 to the spec file.
problem.c, problem.h (PR_0_HURD_CLEAR_FILETYPE): Add new problem code.
super.c (check_super_block): If the OS type in the superblock is the
Hurd, check to see if the filetype feature is set, and offer to clear
it if so. This needs to be done since the Hurd doesn't properly
support the filetype feature. (And since the hurd allows the
transmogrification of files to special files and vice versa --- for no
good reason that I can understand --- it can't support the filetype
feature for the forseeable future, either.)
ChangeLog, mke2fs.c:
mke2fs.c (main): We forcibly turn off the filetype feature if the OS
is the hurd, since the hurd doesn't support it. (And since the hurd
allows the transmogrification of files to special files and vice versa
--- for no good reason that I can understand --- it can't support the
filetype feature for the forseeable future, either.)
mke2fs.c (proceed_question): Fix reversed sense of proceed_question
that was busted due to the internationalization patch. Fixed bug
where if proceed_question was called twice, the input buffer wasn't
cleared of the previous question's newline.
ChangeLog, expect.1, expect.2, image.gz, name:
f_hurd: Add test for Hurd-specific features (right now, just checks to
make sure the filetype feature is cleared)
ChangeLog, ls.c:
ls.c (list_super): Change the string displayed for the Hurd to be
GNU/Hurd, instead of just "GNU".
badblocks.c, dumpe2fs.c, e2label.c, mke2fs.c, tune2fs.c, uuidgen.c:
For platforms that don't define optarg.h, manually define optarg and
optind.
ChangeLog, main.c:
main.c: For platforms that don't define optarg.h, manually define
optarg and optind.
ChangeLog, unix.c:
unix.c: For platforms that don't define optarg.h, manually define
optarg and optind.
pass1.c (check_immutable, e2fsck_pass1_check_device_inode): Check for
the append-only as well as the immutable flag.
problem.c (PR_1_SET_IMMUTABLE): Adjust message to include append-only
flag. Fix comment for compression flag.
unix.c (e2fsck_update_progress): Limit the number of updates to the
progress bars to 8 times a second. This allows a 9600 baud console
link to keep up.
unix.c (main): If compression is enabled on the filesystem, print a
warning message (for now).
message.c: Add new compression shortcut: @c == compress
problem.c, problem.h (PR_1_COMPR_SET): Add new error code.
pass1.c (check_blocks): If the inode has EXT2_COMPRBLK_FL flag set,
check to see if the filesystem supports compression. If it does pass
this information down to process_block() so it can treat the
compressed block flag words correctly. If not, offer to clear the
flag, since it shouldn't be set.
(process_block): If an inode has the compressed inode flag set, allow
EXT2FS_COMPRESSED_BLKADDR.
pass1b.c (process_pass1b_block, delete_file_block, clone_file_block):
pass2.c (deallocate_inode_block): Use HOLE_BLKADDR to check to see if
the block can be skipped.
ChangeLog, Makefile.in:
Makefile.in: Exclude the internationalization files from being
distributed.
ChangeLog, configure, configure.in:
configure.in: Add support for --enable-compression. This is
experimental code only for now, which is why it's under --enable test.
Once it's stable, it will always be compiled in.
TODO:
Commit additional TODO items.
e2fsck.h:
pass1.c (mark_table_blocks, e2fsck_pass1): Remove
ctx->block_illegal_map, since it's not needed by pass1, and pass1b has
been modified to calculate it manually if needed. This reduces the
memory footprint needed by e2fsck.
pass1b.c (check_if_fs_block): New static function which returns
whether or not a block overlaps with filesystem metadata. This
replaces consulting the block_illegal_map bitmap.
util.c:
Make resource tracking message more concise.