The -R option is only used for backwards compatibility, and -E is
preferred, so change the usage message accordingly.
Signed-off-by: Coly Li <coyli@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add macros to support variable-length group descriptors for ext4.
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a user specifies a bind mount with a non-zero fsck pass number, for
example:
/foo /bar ext3 bind,defaults 1 3
print a warning and ignore the fstab entry.
Addresses-Red-Hat-Bugzilla: #151533
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix up $(root_sysconfdir) handling misc/Makefile.in so that
make install and make uninstall works correctly when $prefix != /.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new functions ext2fs_{set,get}_{inode,block}_bitmap_range()
which allow programs like e2fsck, dumpe2fs, etc. to get and set chunks
of the bitmap at a time.
Move the representation details of the 32-bit old-style bitmaps into
gen_bitmap.c.
Change calls in dumpe2fs, mke2s, et. al to use the new abstractions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
People are getting surprised by mke2fs creating filesystems with
different defaults than earlier versions of mke2fs if mke2fs.conf is
not present. Having gotten two complaints about ramdisks getting
created by with 4k blocksizes which then blow up when the ramdisk is
mounted with a "Magic mismatch, very weird" error message from the
kernel, let's fix this by making sure mke2fs has a built-in version of
mke2fs.conf file. People can still override the built-in version of
mke2fs.conf by editing /etc/mke2fs.conf, but this maintains the
previous behavior.
Addresses-Sourceforge-Bug: #1745818
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch changes ext2fs_open() to set EXT2_FLAG_MASTER_SB_ONLY by
default. This avoids some problems in e2fsck (reported by Jim Garlick)
where a corrupt journal can end up writing the bad superblock to the
backups. In general, only e2fsck (after the filesystem is clean),
tune2fs, and resize2fs should change the backup superblocks by default.
Most callers of ext2fs_open() should not be touching anything where the
backups should be touched. So let's change the defaults to avoid
potential problems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A quick patch to sanity check the inode ratio vs the inode size. In
some cases Lustre users have tried specifying an inode size of 4096
bytes, while keeping an inode ratio of one inode per 4096 bytes. I'm
sure more people will do this now that large inodes are available in
ext4 and documented in e2fsprogs.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Store the RAID stride value when a filesystem is created with a requested
RAID stride, and then use it automatically in resize2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mke2fs is supposed to set the uid/gid ownership of the root directory when
a non-rooot user creates the filesystem. This wasn't working correctly
if the uid/gid was > 16 bits. In additional, debugfs wasn't displaying
large uid/gid's correctly. This patch fixes these two programs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
One of our testers filed a bug that said "mkfs.ext3 is much slower
when mke2fs.conf is missing..."
This is because the shipped defaults in mke2fs.conf do not match the
shipped defaults in the mkfs code itself; he wound up making a 1k
block filesystem on a very large block device, for example.
So - How about this patch, to bring them back into line? Which makes
me wonder; having "defaults" in 2 different places is bound to get out
of sync; should we instead generate both code & config file defaults
(and maybe man page defaults) from a common source?
Anyway, here's a patch to bring mke2fs.conf and mke2fs.c into line for
current defaults...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Increase the maximum size of the journal to 100 times the previous
maximum, but add a restriction that it can be no more than half the size
of the filesystem.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The memory allocated by inst is not reclaimed. There also was a
call to exit that coverity did not catch the resource leak. This
might not really be a big issue since the memory will be freed when
fsck exits, but it should be done anyway imho.
Coverity ID: 32: Resource Leak
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
zero_buf and buf must be freed on return from the
output_meta_data_blocks() function.
Coverity ID: 26+27: Resource Leak
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
If the fs_type is not specified and we are creating a journal device, to
use a fs_type of "journal"; this used to be the behavior before we added
support for the /etc/mke2fs.conf file, so let's fix it to restore the
old behavior.
Coverity ID: 4: Deadcode
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change all of the e2fsprogs programs to use the newer add_error_table()
and remove_error_table() interfaces instead of the much older
initialize_*_error_table() function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add support for the new flag EXT2_FLAG_SOFTSUPP_FEATURES flag to
ext2fs_open() , which allows application to open filesystes with features
which are currently only partially supported by e2fsprogs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Badblocks now interprets last_block argument as the last block to check,
instead of the number of blocks to check, to be consistent with the
badblocks man page.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix revision 0 error checking so that it doesn't give spurious error
when the user gives a command-line option of "-O none".Add error
checking so that "-r 0 -j", "-r 0 -s 1", and "-r 0 -E resize=XXX" will
print an explanatory error message and abort.
Addresses Debian bug: #392107
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make the smallest journal be 1400 blocks instead of 1024 blocks to
make sure there is enough room to support on-line resizing.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new ext2fs library inline functions in order to calculate
the starting and ending blocks in a block group.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
There were still some %d's lurking when we print blocks & inodes; also
many of the counters in the e2fsck_struct were signed, and probably
need to be unsigned to avoid overflows.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
For loops iterating over all group descriptors, consistently define
first_block and last_block in a way that they are inclusive of the
range, and do not overflow.
Previously on the last block group we did a test of <= first +
dec_blocks; this would actually wrap back to 0 for a total block count
of 2^32-1
Also add handling of last block group which may be smaller.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Add a new functiom, e2p_percent(), which correct calculates the percentage
of a number based on a given percentage, without worrying about overflow
issues. This is used where we calculate the number of reserved blocks using
a percentage of the total number of blocks in a filesystem.
Based on patches from Eric Sandeen, but generalized to use this new function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Add a new function, ext2fs_div_ceil(), which correctly calculates a division
of two unsigned integer where the result is always rounded up the next
largest integer. This is used everywhere where we might have
previously caused an overflow when the number of blocks
or inodes is too close to 2**32-1.
Based on patches from Eric Sandeen, but generalized to use this new function
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
This patch fixes the blkid.8.in description of the "-l" option. The man
page gives the impression that the first match is the one that is returned.
However, the blkid_find_dev_with_tag() function returns the device with
the highest priority (which is good, because that is what people really want).
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Improve the findsuper program by printing the uuid and label from the
superblocks, as well as the starting and ending offsets of the
filesystem given the information in the superblock. Omit by
default printing superblocks that are likely found in located in an ext3
journal unless an explicit -j option is given.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Disambiguate the use of "-F" (force) flag for mke2fs to avoid dangerous
situations. The use of -F is needed for regular backing files and
for filesystems on whole block devices. It should NOT be confused
with mke2fs on an apparently-mounted or in-use filesystem.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch allows "inode_size" to be specified in the mke2fs.conf file,
and always compiles in the "-I" option. In addition, it disallows
specifying the inode size on rev 0 filesystems, though I don't think
this was much of a danger anyways.
Clean up dead lines in ext2fs.h.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes some (but not all) of the compatibility bugs which prevented
e2fsprogs from being compiled on a Linux 2.0.35 system. There are still
some unprotected use of long long's, and apparently some type problems
with the uuid library, but these can be fixed up later.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We were complaining with a confusing error message if the user tried to specify
a check interval larger than a 365 days. It's probably a bad idea if the user wants to
do this, but it's not worth it to complain.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The exlcusive device safety check that was added inadvertently broke
e2fsck -cc and mke2fs -cc since e2fsck and mke2fs hold the device
in exclusive access when badblocks is run. So we add a private option
to badblocks, -X, which is passed by e2fsck and mke2fs to badblocks
to indicate that it is OK to skip the EXT2_MF_BUSY checks.
Addresses Debian Bug: #366017
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This feature is initially intended for testing purposes; it allows an
ext2/ext3 developer to create very large filesystems using sparse files
where most of the block groups are not initialized and so do not require
much disk space. Eventually it could be used as a way of speeding up
mke2fs and e2fsck for large filesystem, but that would be best done by
adding an RO_COMPAT extension to the filesystem to allow the inode table
to be lazily initialized on a per-block basis, instead of being entirely initialized
or entirely unused on a per-blockgroup basis.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently filefrag uses signed int for block numbers, thus it reporting
corrupted block number for a file on a more than 8TB ext3. The following
trivial patch replace the signed int type block number with "unsigned
long type.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make sure $(DESTDIR)/usr/share/man/man5 exists when installing the man
page. Make sure the compressed version of the man pages are deleted
when installing the man pages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use "stanza" to refer to top-level stanzas, and fix a few typos. Also
indent the sample profile format so it looks nicer.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixed a bug caused by using an insufficiently larger counter field so
that mklost+found would work properly on filesystems with larger block
sizes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the format string(%d, %ld) for a block number and inode number
to %u or %lu.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add notes in chattr's man page to make sure the reader refers to the
BUGS AND LIMITATIONS section so that even an idiot will be able to see
that some of these attributes are not yet implemented. (Addresses
Debian Bug: #312515)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On Mon, Oct 31, 2005 at 01:23:53PM +0000, Martin Michlmayr wrote:
> Package: e2fsprogs
> Version: 1.38-2
> Severity: minor
>
> e2fsprogs isn't consistent in its use of spaces before an exclamation
> mark. The patch below fixed this by removing some spaces.
> (Interestingly, I couldn't find the error message in the sources where
> I noticed this inconsistency, namely "group descriptors corrupted !").
Patch applied, but none of the source files you touched are actually
compiled in e2fsprogs, and most of them weren't written by me. :-)
Addresses Debian Bug #336604
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
fsck.8.in: Add additional fsck.* programs to the SEE ALSO section.
Fix missing commas in list. (Addresses Debian Bug #329859)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix mke2fs man page to properly document the fact that mke2fs -L takes
an argument. (Addresses Debian Bug #322188)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add extra spaces when printing the "done" message to clear out the
block number to fix a display corruption when the -s option is used to
display the progress of the test. (Addresses Debian Bug #322231)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reorder some mke2fs arg parsing to be more alphabetical, and remove
use of atoi() (which doesn't report errors) in favour of strtoul().
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Allow the reserved blocks ratio to be specified in fractional
percentages.
Addresses-Debian-Bug: #80205
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
an integer, not an unsigned long. Fix this to avoid problems on 64-bit
platforms where the size of an integer != the size of a long.
(Addresses Debian Bug #309655)
for a single device.
Add a new function to the blkid library, blkid_probe_all_new().
Optimize blkid_find_dev_with_tag() so that extraneous device validation are
skipped. (Makes a difference for system with a large number of disks).
and changes "bad" to "invalid" in some messages to avoid confusion with
"bad blocks" in the e2fsck, mke2fs, and badblocks programs. Thanks to
Benno Schulenberg. (Addresses Sourceforge Bug: #1189803)
stored using the new experimental file fragments format,
and use the non-ext2 algorithm for determing the number of
extents. Avoid reporting a false discontinuity if there
is a non-allocated block (or extent) at the beginning of
the file.
we changed ext2fs_create_resize_inode to always create the resize inode,
even when s_reserved_gdt_blocks is zero. Mke2fs and e2fsck was calling
ext2fs_create_resize_inode() unconditionally, and depending on
s_reserved_gdt_blocks to be zero, instead of explicitly checking the
resize_inode feature.
consistently when the blkid cache file is explicitly set
to /dev/null. (Addresses Debian Bug #292425)
Also expose blkid_verify() as a public function to the blkid library.
2.6 kernels, unless explicitly requested by the user; not
all 2.6 kernels (includeing stock 2.6 kernels as of this
writing) don't support blocksizes > 4k.
e2fsprogs-1.35-11.2. Fixed multiple command-line parsing
bugs so that backwards compatibility is maintained, and so
that certain command-line options wouldn't be ignored.
the resize= raid/extended option so it actually works.
(The patch from Fedora e2fsprogs-1.35-11.2 claimed it
worked, but it was a placebo, despite the claim that it
worked in the usage message.)
should use the passed-in argument, not optarg, even though
the two are the same in the case of the current caller of
said function. (i.e., no user-visible problems were caused
by this, even though the code was wrong).
correctly.
Update Makefile dependencies.
Update "make depend" production so that it filters out comments
inserted by newer gcc compilers.
Remove sync from e2fsck's "make all" target.
example, /tmp/test.img?offset=1024. Multiple options can separated using
the & character, although at the moment the only option implemented is
the offset option in the unix_io layer.
e2initrd_helper, which obviates the need for using /bin/awk
and mounting/unmounting the root filesystem during the initrd
process. (Addresses Debian Bug #247775)
TUNE2FS_SKIP_MOUNT_CHECK is set, do not try
to check if the filesystem is mounted.
(update_feature_set): If the compatibility bitmasks were
not modified, don't set the superblock dirty bit.
some generated files, by having subst update the modtime on these
files even when the generated file hasn't changed. We do this with
generated files that do not have any downstream dependencies.
fixing up gcc -Wall nits. badblocks -t random was not
getting handled properly because ~0 needed to be cast to
an unsigned long instead of an unsigned char. (Addresses
Debian bug #234828)
the superblock and block group descriptors into two functions:
ext2fs_reserve_super_and_bgd, found in lib/ext2fs/alloc_sb.c, and
ext2fs_super_and_bgd_lock, found in lib/ext2fs/close.c.
Change e2fsck/pass1.c (mark_table_blocks), lib/ext2fs/closefs.c
(ext2fs_flush), lib/ext2fs/initialize.c (ext2fs_initialize),
and misc/dumpe2fs.c (list_desc) to use these functions.
e2fsck/ChangeLog
pass1.c (mark_table_blocks): Use the new function
ext2fs_reserve_super_and_bgd to calculate the blocks to be
reserved.
lib/ext2fs/ChangeLog
closefs.c (ext2fs_super_and_bgd_loc): New function which
centralizes the calculation of the superblock and block
group descriptors.
(ext2fs_flush): Use ext2fs_super_and_bgd_lock to figure
out where to write the superblock and block group
descriptors.
alloc_sb.c (ext2fs_reserve_super_and_bgd): New function which
reserves space in the block bitmap using
ext2fs_super_and_bgd_loc.
initialize.c (ext2fs_initialize): Use
ext2fs_reserve_super_and_bgd to initialize the block bitmap.
misc/ChangeLog
dumpe2fs.c (list_desc): Use ext2fs_super_and_bgd_loc to
determine the locations of the superblock and block group
descriptors.
Mke2fs has been modified to honor the MKE2FS_SKIP_PROGRESS,
MKE2FS_DEVICE_SECTSIZE, and MKE2FS_SKIP_CHECK_MSG in order
facilitate the regression testing.
offset of the device is page aligned. (Addresses Debian
Bug #203713)
badblocks.c (test_ro, test_rw): Add code to recover after an
error so that we continue reading on page-aligned
boundaries. (Thanks to Philippe Troin <phil@fifi.org> for
the patch.)
new semantics: WAIT_ALL vs. WAIT_ATLEAST_ONE. This fixes
a bug where when fsck is waiting for another partition on
the same spindle, it spins wasting a lot of CPU.
test to honor the -c option (number of blocks at a time).
do_read and do_write will try to turn on the O_DIRECT flag
if it appears that it is possible to use it. (Addresses
Debian bug #198006)
device is larger than the default block size, then use the
sector size of the device as the default block size.
getsectsize.c (ext2fs_get_device_sectsize): New function which
returns the hardware sector size (if it is available).
by Thayne Harbaugh. These patches allow the -t option to
control the test pattern(s) used when checking the disk.
Test patterns may be specified in all modes (r/w, r/o and
non-destructive).
called for multiple passes.
(test_nd): Fix bug in chosing randomness for the
non-destructive test. We were only using 1 bit of
randomness per byte instead of 8 due to a bit-shift bug.
Also, initialize the random number generator from the time
in main(). Thanks to Thayne Harbaugh for pointing out
these bugs.
tune2fs to use the test I/O manager.
The test I/O manager has been changed to not do anything extra by
default, unless the TEST_IO_FLAGS and/or TEST_IO_BLOCK environment
variables are set, which controls what I/O operations are logged and
a block number to watch, respectively. The log messages are sent to
stderr by default, unless a filename is specified via the
TEST_IO_LOGFILE environment variable.
Fix typo's in README.subset
Change debian control file so it doesn't bomb out if the EVMS FSIM
is not there, since it is not built on the Hurd. Resolves Debian
bug #189687.
* Change e2fsck to bracket its progress bar output with ctrl-A and ctrl-B
characters, so that logsave -s can omit writing the progress bar output
to the log file.
in a log file, even if the containing directory hasn't been
mounted yet (in which case the it saves the output in
memory until it can write out the logfile).
main): Don't evaluate the filesystem type when loading the
fstab file, since that might cause fsck to hang trying to
read from a floppy disk. (Addresses Debian bug #187812)
Add tmpfs and devpts to filesystems that should be
ignored, and add jfs, reseirfs, and xfs as filesystems
types where we should complain if we can't find the fsck
program for that filesystem type.
Theodore Ts'o