Quite some definitions in quota library are not necessary. Remove them.
Also fold quota.h file into quotaio.h since it didn't contain that many
definitions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a file system was remounted read-only after a file system
corruption is detected, and then that file system is mounted and
unmounted by the kernel, the journal would have been recovered, but
the kernel currently leaves the s_errno field still set. This is
arguably a bug, since it has already propgated the non-zero s_errno
field to the file system superblock, where it will be retained until
e2fsck has been run.
However, e2fsck should handle this case for existing kernel by
checking the journal superblock's s_errno field even if journal
recovery is not required.
Without this commit, e2fsck would not notice anything wrong with the
file system, but a subsequent mount of the file system by the kernel
would mark the file system's superblock as needing checking (since the
journal's s_errno field would still be set), resulting an full e2fsck
run at the next reboot, which would find nothing wrong --- and then
when the file system was mounted, the whole cycle would repeat again.
I had seen reports of this in the past, but it wasn't until recently
that I realized exactly how this had come about, since normally e2fsck
would be run automatically before the file system is mounted again,
thus avoiding this problem. However, a user using a rescue CD who
didn't run e2fsck before mounting the a file system in this condition
could trigger this situation, and unfortunately, with previous
versions of e2fsprogs and the kernel, there would be no way out no
matter what the user tried to do.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 732e26b98e added checks to
prevent e2fsck from being run in filesystem-modifying mode against
a mounted or otherwise busy device, due to several bug reports of
users doing this even with the verbose warnings in check_mount().
However, it also prevented e2fsck from checking a mounted root
filesystem, which will prevent the node from booting. Once again
allow e2fsck to run against the mounted root filesystem if it is
also mounted read-only at the time.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The creation of inline wrappers ext2fs_open_file() and ext2fs_stat()
in commit c859cb1de0 in ext2fs.h caused
difficulties with the use of headers, since the headers for open64()
and stat64() may already be included (and skip the declaration of the
64-bit variants) before ext2fs.h is ever read. There is no real way
to solve the missing prototypes and resulting compiler warnings inside
ext2fs.h.
Since ext2fs_open_file() and ext2fs_stat() are not performance
critical operations, they do not need to be inline functions at all,
and the needed function headers can be handled properly in one file.
Similarly, posix_memalloc() was having difficulties with headers, and
was being defined in ext2fs.h, but it is now only being used by a
single file, so move the required header there.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, if e2fsck is run without the "-n" flag (i.e. it
might modify the filesystem), there is no guarantee that it will
open the filesystem with the EXCLUSIVE flag (i.e. O_EXCL) to
prevent the block device from being checked (in most cases this
means mounted, but it could also be an MD/LVM member device).
Conversely, if e2fsck is run with "-n" (i.e. read-only), and
/etc/mtab or /proc/mounts does not report the block device as
mounted then e2fsck thinks the filesystem is unmounted. In this
case, e2fsck incorrectly sets the EXCLUSIVE flag, which causes
the check to fail, even though e2fsck is running read-only.
To fix this, do not open with EXCLUSIVE if it is a read-only check,
and always open with EXCLUSIVE if the filesystem might be changed.
This also prevents filesystem mounts while e2fsck is running.
Also refuse allow e2fsck to run at all if the filesystem is BUSY.
The e2fsck check_mount() was checking for MOUNTED, but not BUSY,
and it should refuse to run outright if the block device is BUSY.
The previous MOUNTED heuristics pre-date the O_EXCL reservation
by the kernel, so there could be uncertainty due to stale /etc/mtab
data, but with newer kernels a busy device should never be modified.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The operator precedence bug means that we might pay atteion to
s_grp_quota_inum even if the RO_COMPAT_QUOTA feature flag is clear.
However, fortunately, this is unlikely to happen in practice.
Cc: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
64-bit journal support was broken; we weren't using the high bits from
the journal descriptor blocks! We were also using "unsigned long" for
the journal block numbers, which would be a problem on 32-bit systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't consider only an error in the superblock summary as incorrect.
The kernel does not update this field except at unmount time, so
don't print errors during a "-n" run if there is nothing else wrong.
Any other unfixed errors will themselves mark the filesystem invalid.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently fsck recomputes quotas and overwrites quota files
whenever its run. This causes unnecessary modification of
filesystem even when quotas were never inconsistent. We also
lose the limits information because of this. With this patch,
e2fsck compares the computed quotas to the on-disk quotas
(while updating the in-memory limits) and writes out the
quota inode only if it is inconsistent.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently e2fsck always incorrectly detects that quota inodes
need to be hidden (even if they are already hidden) and
modifies the superblock unnecessarily. This patch fixes the
check for hidden quota files and avoids modifying the
filesystem if quota inodes are already hidden.
Also, zero-out the old quota inode so that next fsck scan
doesn't complain.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have renamed buggy_init_scripts to accept_time_fudge. Explain this
so that people who find buggy_init_scripts in older e2fsck.conf files
understand what is going on.
Addresses-Debian-Bug: #646963
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change autoconf to test for setmntent() and use that to decide whether
to use getmntent() and setmntent(), since some systems don't have
setmntent() but they do have the mntent.h header file.
Also, remove the includes of mntent.h from e2fsck and mke2fs and other
places where it is not needed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We've decided to remove EOFBLOCKS_FL from the ext4 file system entirely,
because it is not actually very useful and it is causing more problems
than it solves. We're going to remove it from e2fsprogs first and then
after the new e2fsprogs version is common enough we can remove the
kernel part as well.
This commit changes e2fsck to not check for EOFBLOCKS_FL. Instead we
simply search for initialized extents past the i_size as this should not
happen. Uninitialized extents can be past the i_size as we can do
fallocate with KEEP_SIZE flag.
Also remove the EXT4_EOFBLOCKS_FL from lib/ext2fs/ext2_fs.h since it is
no longer needed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Print the actual errors returned by ext2fs_open2() and
ext2fs_check_desc() before we fall back to the backup block group
descriptors so that it's easier to see if there is some obscure
failure that is causing e2fsck to think that it should use the backup
block group descriptors.
Addresses-Google-Bug: #6208183
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For file systems that do not use MMP, there's no reason to close the
file system and then re-open the file system a second time, since
EXT2_FLAG_SKIP_MMP has no meaning for non-MMP file systems anyway.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@whamcloud.com>
We were checking for ENOMEM, but in fact if the malloc() fails,
ext2fs_check_desc() will return EXT2_ET_NO_MEMORY.
Addresses-Google-Bug: #6208183
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the ability to log messages about a file system to a specified
directory, using a file name templace that can be specified in
/etc/e2fsck.conf. This allows us to suppress the output of overly
verbose e2fsck outputs while still allowing the full logging output to
go to an appropriate file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also add appropriate documentation for options/max_count_problems and
problems/0xXXXXXX/max_count settings in /etc/e2fsck.conf
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This throttles the output of a particular problem type, to avoid a
bottleneck caused by (for example) printing a large number of
characters over a rate-limited a serial console.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If an extent has e_len set to zero, the kernel will oops with a
BUG_ON. Unfortunately, e2fsck wasn't catching this case. The kernel
needs to be fixed to notice this case and call ext4_error() instead of
failing an assertion check, but e2fsck should catch this case and
repair it (by deleting the errant extent).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We do not want to discard inode table if the underlying device does not
return zeros when reading non-provisioned blocks. The reason is that if
the inode table is not zeroed yet, then discard would not help us since
we would have to zero it anyway. In the case that inode table was
already zeroed, then the discard would cause subsequent reads to contain
non-deterministic data so we would not be able to assume that the inode
table was zeroed and we would need to zero it again, which does not
really make sense.
This commit adds check to prevent inode table from being discarded if
the discard does not zero data.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When argument '-n' was specified and should run in read-only mode, we
should not attempt to discard anything. In order to do that we have to
check for E2F_OPT_NO flag and clear E2F_OPT_DISCARD flag if E2F_OPT_NO
is set.
This commit fixes the problem when we would mark inode tables as zeroed
(EXT2_BG_INODE_ZEROED) even when e2fsck is running in read-only mode. We
also move the check for E2F_OPT_NO so we can clear E2F_OPT_DISCARD as
early as possible.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The boolean expression (!skip_group || csum_flag) is always true,
since if csum_flag is FALSE, skip_group must also be FALSE. Hence, we
can just remove the expression from the conditional altogether, thus
simplifying the code and making it easier to read/understand.
Also, in the case where the bit is set in the bitmap, there's no point
repeatedly setting first_free to be ext2fs_block_count(fs->super).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously when running e2fsck with '-E discard' argument the end of
the last group has not been discarded. This patch fixes it so we
always discard the end of the last group if needed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When calling e2fsck with '-E discard' option it might happen that
valid inodes are discarded accidentally. This is because we just
discard the part of inode table which lies past the free inode count.
This is terribly wrong (sorry!).
This patch fixes it so only the free parts of an inode table
is discarded, leaving used inodes intact. This was tested with highly
fragmented inode tables with block size 4k and 1k.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Phillip Susi <psusi@ubuntu.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Removing this check will allow us to eventually eliminate code from
the kernel which forcibly initialized the block bitmap when the inode
bitmap is first used. This would eliminate a required journal credit
and extra disk write.
Addresses-Google-Bug: #5944440
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that we have multiple backend implementations of the bitmap code,
this commit teaches e2fsck to use either the most appropriate backend
for each use case.
Since we don't know for sure if we will get it all right, the default
choices can be overridden via e2fsck.conf. The various definitions
are shown here, with the current defaults (which may change as we add
more bitmap implementations and as learn what works better).
; EXT2FS_BAMP64_BITARRAY is 1
; EXT2FS_BMAP64_RBTREE is 2
; EXT2FS_BMAP64_AUTODIR is 3
[bitmaps]
inode_used_map = 2 ; pass1
inode_dir_map = 3 ; pass1
inode_reg_map = 2 ; pass1
block_found_map = 2 ; pass1
inode_bad_map = 2 ; pass1
inode_imagic_map = 2 ; pass1
block_dup_map = 2 ; pass1
block_ea_map = 2 ; pass1
inode_link_info = 2 ; pass1
inode_dup_map = 2 ; pass1b
inode_done_map = 3 ; pass3
inode_loop_detect = 3 ; pass3
fs_bitmaps = 2
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The pass5 checks would fail if the expected and current {inode,block}
bitmaps used different back ends that returned different non-zero
values from the test_*_bitmap() functions. Fix this by changing
"(actual == bitmap)" to "(!actual == !bitmap)".
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Optimize how the tdb library so that running with [scratch_files] in
/etc/e2fsck.conf is more efficient. Use a better hash function,
supplied by Rogier Wolff, and supply an estimate of the size of the
hash table to tdb_open instead of using the default (which is way too
small in most cases). Also, disable the tdb locking and fsync calls,
since it's not necessary for our use in this case (which is
essentially as cheap swap space; the tdb files do not contain
persistent data.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to do an accounting of duplicate clusters on a per-cluster
instead of a per-block basis so we know when we've correctly accounted
for all of the multiply claimed blocks in a particular inode.
Thanks to Robin Dong for reporting this bug.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
PATH_MAX is not portable (for example, it doesn't exist on the Hurd).
So replace it with a new define, which defines the maximum length of
the base quota name. As it turns out, this is substantially smaller
than PATH_MAX.
Also move the definitions relating to quotaio.c from mkquota.h to
quotaio.h, as a cleanup.
Addresses-Debian-Bug: #649689
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When I create a non-extent file with the maximum size in ext4,
e2fsck detects the following error:
Pass 1: Checking inodes, blocks, and sizes
Inode 12, i_size is 4402345721856, should be 4402345721856. Fix?
As we know, e2fsck checks the size field of the inode in pass 1.
However, in case of the ext4 with the feature of ^extent and huge_file,
the maximum file size calculated in e2fsck is less than the real one.
The patch fixes this problem.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we abort fsck (due to ENOMEM for example) we exit
with only the FSCK_ERROR flag. It seems useful
to do the same sorts of checks as we do on normal
exit, and return whether the filesystem was modified,
whether there are still uncorrected errors, etc, even
in the abort case.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch cleans up the quota code as suggested in previous reviews. This
includes
* remove BUG_ON()s and 'exit()' calls from library code
* remove calls to malloc/free and instead use ext2fs_get/free_mem functions.
* lib/quota/common.c file in not needed anymore and is removed.
* rename exported functions to start with quota_
(ex: init_quota_context --> quota_init_context)
* better error handling in quota library
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since the advent of 64bit filesystems, revoke blocks store 64-bit
block numbers instead of 32-bit block numbers. Therefore we need to
be able to handle that case.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also remove the _("<foo>") marker from a string that was all numbers
and hence didn't need punctuation.
Thanks to Philipp Thomas and Goeran Uddeborg for reporting these
buglets.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For those e2fsprogs programs which use libcom_err and are
internationalized, pass the gettext() function to libcom_err during
program initialization.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The get_qf_name() function used PATH_MAX, which is non-portable.
Worse, it blindly assumed that PATH_MAX was the size of the buffer
passed to it --- which in the one and only place where it was used in
libquota, was a buffer declared to a fixed size 256 bytes.
Fix this by simply getting rid of the function altogether.
Cc: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
One table got missed when adding #ifdef's so that e2fsck/sigcatcher.c
would compile on non-Linux systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck modifies certain superblock fields which the kernel doesn't
look at, mark the superblock as dirty without marking the file system
as changed. This will avoid e2fsck signalling the init scripts that a
reboot is necessary. This is safe, because the kernel doesn't
actually look at these superblock fields.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If MMP is enabled and e2fsck determines that it needs to restart
itself on account of various MMP conditions, it will close the current
fs and jump back to the start of fs checking. However, closing fs
also frees it, which means that we need to set ctx->fs to NULL to
prevent subsequent open code from accessing the old deleted pointer.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
All of the signals which the signal catcher tries to interpret aren't
necessarily defined on all systems. So add #ifdef's to protect
various signals to avoid compilation failures on non-x86 platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In some cases the bad block inode gets corrupted. If it looks insane,
offer to clear it before trying to interpret it does more harm than
good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Multi-mount protection is feature that allows mke2fs, e2fsck, and
others to detect if the filesystem is mounted on a remote node (on
SAN disks) and avoid corrupting the filesystem. For e2fsprogs this
means that it checks the MMP block to see if the filesystem is in use,
and marks the filesystem busy while e2fsck is running on the system.
This is useful on SAN disks that are shared between high-availability
servers, or accessible by multiple nodes that aren't in HA pairs. MMP
isn't intended to serve as a primary HA exclusion mechanism, but as a
failsafe to protect against user, software, or hardware errors.
There is no requirement that e2fsck updates the MMP block at regular
intervals, but e2fsck does this occasionally to provide useful
information to the sysadmin in case of a detected conflict.
For the kernel (since Linux 3.0) MMP adds a "heartbeat" mechanism to
periodically write to disk (every few seconds by default) to notify
other nodes that the filesystem is still in use and unsafe to modify.
Originally-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Several compiler errors are quieted:
- zero-length gnu_printf format string
- unused variable
- uninitalized variable (though it isn't actually used for anything)
- fixed a bug in ext2fs_stat() if stat64() does not exist
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These reflect either file descriptors which aren't tested
for failure, or closures of fd's which may have failed.
In setup_tdb(), test for failure of mkstemp and return
without trying to open the file (again).
In reserve_stdio_fds, rather than closing the "extra"
fd == 3 due to the way the loop is written, just
don't go that far by using while (fd <= 2).
In logsave, it forks and retries forever if open fails,
but at least make coverity happy by explicitly not
trying to close a negative file descriptor.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fn and/or array was not freed in some error paths.
[ Also make sure the array is NULL terminated before we free it in
get_dirlist(). --tytso]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
e2fsck_allocate_memory() already sets allocated memory to 0,
so remove the explicit memset.
Especially since it was setting the wrong size (iter not *iter)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
old_op is set but never used, because we restore "0"
not old_op. So don't bother with it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
testing fs for NULL in expand_percent_expression():
e2fsck_ctx = fs ? (e2fsck_t) fs->priv_data : NULL;
implies that fs could be NULL, but it's passed to print_pathname()
which defererences it without further testing.
So make this safe by returning "???" for a nul fs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The name_len field in ext2_dir_entry is actually comprised of
the name length in the lower 8 bytes, and the filetype in the
high 8 bytes. So in places, we mask name_len with 0xFF to
get the actual length.
But once we have masked name_len with 0xFF, there is no point
in testing whether it is greater than EXT2_NAME_LEN, which
is 255 - or 0xFF. So all of these tests are extraneous.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reserve EXT4_FEATURE_RO_COMPAT_METADATA_CSUM and
EXT2_FEATURE_COMPAT_EXCLUDE_BITMAP. Also reserve fields in the
superblock and the inode for the checksums. In the block group
descriptor, reserve the exclude bitmap field for the snapshot feature,
and checksums for the inode and block allocation bitmaps.
With this commit, the metadata checksum and exclude bitmap features
should have reserved all of the fields they need in ext4's on-disk
format.
This commit also fixes an a missing byte swap for s_overhead_blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Amir Goldstein <amir73il@gmail.com>
If the blocks of a filesystem is a multiple of blocks_per_group,
blocks of the ending group is computed wrongly. Use the
new ext2fs_group_blocks_count() helper instead.
Eric Sandeen: Converted to use new blocks per group helper
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If '-n' option is specified there should be no changes made to the file
system hence we should not attempt to discard the file system. This
commit adds a check into the e2fsck_discard_blocks() condition so it skip
discard if E2F_OPT_NO flag is set.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently the bigalloc implementation in the kernel requires extents,
but this restriction might get relaxed in the future. Also, old
versions of mke2fs that supported bigalloc during early testing
created the root and lost+found directories without using
extent-mapped inodes. This makes it possible for e2fsck to better
support these old legacy file systems if it comes across them.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystems with a blocksize of 1024 have the superblock starting at
block #1. However, the first data block in the superblock is 0 to
simplify the cluster calculations. So we must compensate for this in
a number of places, mostly in the ext2fs library, but also in e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Treat the s_blocks_count field in the superblock as a free block count
(instead of the number of free clusters) for bigalloc file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 2a77a784a3 (firest released in e2fsprogs 1.33) compared
superblock summary free blocks and inode counts with the allocation
bitmap counts before starting the file system check proper, and if
they differed, set the superblock and marked it as dirty. If no other
file systme changes were required, this would cause a "*** FILE SYSTEM
WAS MODIFIED ***" message without any explanation of what e2fsck had
changed.
We fix this by only setting the superblock summary free block/inodes
counts if we are skipping a full check, and in non-preen mode, e2fsck
will now print an explicit message stating how the superblock had been
updated.
In a full check, any updates to the superblock free blocks/inodes
fields will be noted in pass5.
This change requires changing a few test results (essentially
reversing the changes made in commit 2a77a784a3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The code which simulated handling uninitialized block bitmaps didn't
take bigalloc file systems into account correctly. Fix it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The write_journal_inode() code is only setting the low 32-bit i_size
for the journal size, even though it is possible to specify a journal
up to 10M blocks in size. Trying to create a journal larger than 2GB
will succeed, but an immediate e2fsck would fail. Store i_size_high
for the journal inode when creating it, and load it upon access.
Use s_jnl_blocks[15] to store the journal i_size_high backup. This
field is currently unused, as EXT2_N_BLOCKS is 15, so it is using
s_jnl_blocks[0..14], and i_size is in s_jnl_blocks[16].
Rename the "size" argument "num_blocks" for the journal creation functions
to clarify this parameter is in units of filesystem blocks and not bytes.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I had an extremely corrupted customer filesystem which, after thousands
of lines of e2fsck output, found one more problem on an immediately
subsequent e2fsck. In short, a file had had its i_file_acl block
cloned due to being a duplicate. That ultimately got cleared
because the fs did not have the xattr feature, and the inode
was subsequently removed due to invalid mode.
The 2nd e2fsck pass found the cloned xattr block as in use, but
not owned by any file, and had to fix up the block bitmaps.
Simply skipping the processing of duplicate xattr blocks on a
non-xattr filesystem seems reasonable, since they will be cleared
later in any case.
(also fix existing brace misalignment)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for specifying 'reserved_ratio' (percent blocks
reserved for super user, same as '-m' command line option) in mke2fs.conf.
It adds profile_get_double function in profile.c that allows reading
floating point values from profile files.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A user received the "file system is mounted; do you really want to
continue" prompt, and then instead of typing "n" for no, forgot that
he hadn't declined to continuation question, and typed the up-arrow
key, which in his locale, the 'A' in "^[[A" was interpreted as "yes",
and he lost data.
This was clearly the user's fault, but to make e2fsck a bit safer
against user stupidity/carelessness, we will change the "fs is
mounted; continue?" prompt to default to no, and treat the escape
character (along with the return and space characters, currently) as a
request for the default answer.
Addresses-Debian-Bug: #619859
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a few typos in manpages.
Reported-by: Branislav Náter <bnater@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds the superblock fields needed so that dumpe2fs works and the
code points and renames the superblock fields from describing
fragments to clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for detecting the new 'quota' feature in ext4.
The patch reserves code points for usr and group quota inodes and also
for the feature flag EXT4_FEATURE_RO_COMPAT_QUOTA.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Flags used during RHEL/Fedora builds lead to a couple type-punning
warnings:
recovery.c: In function 'do_one_pass':
recovery.c:539: warning: dereferencing type-punned pointer will break strict-aliasing rules
./csum.c: In function 'print_csum':
./csum.c:170: warning: dereferencing type-punned pointer will break strict-aliasing rules
The two changes below fix this up.
Note that the csum test binary output changes slightly, but this does
not break any tests.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As recently discussed on linux-ext4@vger.kernel.org add an option to e2fsck
to allow to replay the journal only. That will allow scripts, such as
pacemakers 'Filesystem' RA to first replay the journal and if that sets
an error state from the journal replay, further check for that error
(dumpe2fh -h | grep "Filesystem state:") and if that shows and error
to refuse to mount. It also allows automatic e2fsck scripts to first
replay the journal and on a second run after the real pass1 to passX checks
to test for the return code.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the user specifies "e2fsck -j UUID=XXX", e2fsck should do blkid
interpretation, since e2fsck does it with the base file system name.
So from the sake of consistency and user convenience, we should do it
here too.
Addresses-Debian-Bug: #559315
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The boolean options "force_no" in the problems stanza of e2fsck.conf
allows a particular problem code be treated as if the user will answer
"no" to the question of whether a particular problem should be fixed
--- even if e2fsck is run with the -y option.
As an example use case, suppose a distribution had widely deployed a
version of the kernel where under some circumstances, the EOFBLOCKS_FL
flag would be left set even though it should not be left set, and a
customer had a workload which exercised the fencepost error all the
time, resulting in many large number of inodes that had EOFBLOCKS_FL
set erroneously. Enough, in fact, the e2fsck runs were taking too
long. (There was such a bug in the kernel, which was fixed by commit
58590b06d in 2.6.36).
Leaving EOFBLOCKS_FL set when it should not be isn't a huge deal, and
is certainly than having high availability timeout alerts going off
left and right. So in this case, the best fix might be to put the
following in /etc/e2fsck.conf:
[problems]
0x010060 = { # PR_1_EOFBLOCKS_FL_SET
force_no = true
no_ok = true
no_nomsg = true
}
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes two possible causes for the error message:
WARNING: PROGRAMMING BUG IN E2FSCK!
OR SOME BONEHEAD (YOU) IS CHECKING A MOUNTED (LIVE) FILESYSTEM.
inode_link_info[X] is Y, inode.i_links_count is Z. They should be the same!
One cause which can trigger this message is when an inode has an
illegal link count > 65500 --- for example, 65535. This was the case
in the Debian Bug report #555456.
Another cause which could trigger this message is if an ext4 directory
previously had more than 65000 subdirectories (thus causing
i_link_count to be set to 1), but then some of the subdirectories were
deleted, such that i_link_count should now be the actual number of
subdirectories.
Addresses-Debian-Bug: #555456
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Clarify the e2fsck.conf(5) man page to make it clear that it applies
for ext4 file systems.
Addresses-Debian-Bug: #591083
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In Pass 5 when we are checking block and inode bitmaps we have great
opportunity to discard free space and unused inodes on the device,
because bitmaps has just been verified as valid. This commit takes
advantage of this opportunity and discards both, all free space and
unused inodes.
I have added new set of options, 'nodiscard' and 'discard'. When the
underlying devices does not support discard, or discard ends with an
error, or when any kind of error occurs on the filesystem, no further
discard attempt will be made and the e2fsck will behave as it would
with nodiscard option provided.
As an addition, when there is any not-yet-zeroed inode table and
discard zeroes data, then inode table is marked as zeroed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This prevents accidentally replaying and resetting the journal while
it is mounted, due to an accidental attempt to run e2fsck on an LVM
snapshot of a file system with an external journal.
Addresses-Debian-Bug: #587531
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For file systems with 64-bit block numbers, we need to make sure we
correct the i_blocks_hi field as well as the i_blocks field when
setting it to the correct value.
Thanks to Justin Maggard for pointing this out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When a device name is misspelled, we output the full text about specifying
alternate superblock. This is slightly misleading because when the device
cannot be open because of ENOENT, this certainly won't help. So just print
that device does not exist and exit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 641b66b fixed a floating point precision error which can result
in a search algorithm looping forever. It can also result in an array
index being out of bounds and causing a segfault. Here are two more
cases in e2fsck and resize2fs that need to be fixed. I've just used
the same fix from the that commit.
Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where the original superblock and the backup superblock
are both invalid in some way, e2fsck will try to go back to the
orignal superblock. To do that, it must close the attempted open
using the backup superblock first (since otherwise the exclusive open
will prevent the subsequent open from succeding).
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The getopt() function returns an int, not a char. On systems where the
default char is unsigned (like ppc), we get weird behavior where -1 is
truncated to 0xff but compared to (int)-1.
Also fix this same bug for two test programs, test_rel and iscan,
which aren't currently used at the moment.
Addresses-Gentoo-Bug: #299386
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add superblock fields which track where and when the first and most
recent file system errors occured. These fields are displayed by
dumpe2fs and cleared by e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This test, added to e2fsprogs-1.41.12, is backwards.
If EOFBLOCKS is set, then the size -should- be less than
the last physical block...
xfstests 013 caught this.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It's a bad idea to set the checksums if e2fsck is aborted by the user,
and it often causes an error message, "Inode bitmap not loaded while
setting block group checksum info".
Addresses-Launchpad-Bug: #582035
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These options allow e2fsprogs to be built using symlinks instead of
hard links, and to be installed using symlinks instead of hard links,
respectively.
Addresses-Sourceforge-Bug: #1436294
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where s_first_data_block is 1, we need to explictly reject
an extent whose starting physical block is zero.
Thanks to Jiaying Zhang <jiayingz@google.com> for finding this bug.
Addresses-Google-Bug: #2573806
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a corrupted file system causes us to want to delete an extent, and
that causes us to want to release a block in e2fsck pass #1, it would
be preferable if e2fsck didn't seg fault. This tends to get users
craky, as users are wont to do. :-)
Thanks to Dirk Reiners for reporting this bug:
e2fsck crashes fixing a corrupted 3.5 TB filesystem:
0x0000000000432002 in ext2fs_unmark_generic_bitmap (bitmap=0x0, bitno=623386749)
at gen_bitmap.c:183
183 if ((bitno < bitmap->start) || (bitno > bitmap->end)) {
(gdb) bt
bitno=623386749) at gen_bitmap.c:183
block=623386749) at ../../lib/ext2fs/bitops.h:319
inuse=-1) at alloc_stats.c:78
extent.c:1509
pb=0x7fffffffdfe0, start_block=0, ehandle=0x6dcf50) at pass1.c:1709
pb=0x7fffffffdfe0, start_block=0, ehandle=0x6dcf50) at pass1.c:1737
pctx=0x7fffffffe100, pb=0x7fffffffdfe0) at pass1.c:1842
block_buf=0x6c4330 "\373\212#") at pass1.c:1920
The source of the NULL bitmap is fs on stack frame 2:
(gdb) up 2
inuse=-1) at alloc_stats.c:78
78 ext2fs_unmark_block_bitmap(fs->block_map, blk);
Addresses-SourceForge-Bug: #2971800
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are broken embedded devices that have system clocks that always
reset to January 1, 1970 whenever they boot (even if no power is
lost). There are also systems that have super cheap clock crystals
that can be very inaccurate. So if the option broken_system_clock is
given, disable all time based checks. E2fsck will also try to detect
incorrect system clock times, and automatically mark the system clock
as insane.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Justin reported that creating a 4T file with posix_fallocate led
to fsck errors:
e2fsck 1.41.10 (10-Feb-2009)
Pass 1: Checking inodes, blocks, and sizes
Inode 12, i_blocks is 8589935432, should be 840. Fix? yes
This looks like a 32-bit overflow.
commmit 8a8f36540b added handling of
the high i_blocks number, but we accumulate blocks in the num_blocks
field, and that's still just 32 bits.
Note: we don't need to expand max_blocks for now, that's only used
in the non-extents case, and those files have smaller max sizes.
I haven't been able to replicate the problem, oddly, but Justin
reports that this patch fixed his situation.
Reported-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For a filesystem that fails with:
journal_bmap: journal block not found at offset 7334 on loop0
JBD: bad block at offset 7334
e2fsck won't actually fix this; it will mark the fs as clean,
so it will mount, but it does not fix that block, and when the
journal reaches this point again it will fail again.
The following simple change to process_journal_block() might be
a little drastic; it will clear & recreate the journal inode if
it's sparse - i.e. if it gets block 0.
I suppose we could be more complicated and try to replay the journal
up to the error, but I'm not sure it's worth it since we're fscking
it anyway.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There were a number of problems that were prompting the user whether
or not to ABORT, but then would abort regardless of whether the user
answered yes or no. Change those to be PROMPT_NONE, PR_FATAL.
Also, fix PR_1_RESIZE_INODE_CREATE so that it recovers appropriately
after failing to create the resize inode. This problem now uses
PROMPT_CONTINUE instead of PROMPT_ABORT, and if the user says, "no",
the code will abort.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 6267ee4 avoided repeating pass #1 over and over again if
multiple block groups are found with inodes in the bg_itable_unused
region during pass #2. This caused a regression because the problem
with not restarting pass #1 right away is that e2fsck will offer to
clear directory entries for inodes that are deleted, and e2fsck can't
easily distinguish between deleted inodes and inodes that were skipped
because of an incorrect bg_itable_unused value. So once an inode is
found in an unused region and we know that we're going to restart the
e2fsck pass, don't offer to clear any deleted inodes --- since those
will be caught in the second round.
Addresses-Google-Bug: #2642165
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some kernels will crash if EOFBLOCKS_FL is set when it is it not
needed, and this if it is left set when it isn't needed, it is a sign
of a kernel bug.
Addresses-Google-Bug: #2604224
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This reverts commit 0ea910997b.
Since the Linux kernel now has support for the EXT4_EOFBLOCKS_FL flag
starting in 2.6.34, we don't need this workaround any more.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a corrupted file system causes us to want to delete an extent, and
that causes us to want to release a block in e2fsck pass #1, it would
be preferable if e2fsck didn't seg fault. This tends to get users
craky, as users are wont to do. :-)
Thanks to Dirk Reiners for reporting this bug:
e2fsck crashes fixing a corrupted 3.5 TB filesystem:
0x0000000000432002 in ext2fs_unmark_generic_bitmap (bitmap=0x0, bitno=623386749)
at gen_bitmap.c:183
183 if ((bitno < bitmap->start) || (bitno > bitmap->end)) {
(gdb) bt
bitno=623386749) at gen_bitmap.c:183
block=623386749) at ../../lib/ext2fs/bitops.h:319
inuse=-1) at alloc_stats.c:78
extent.c:1509
pb=0x7fffffffdfe0, start_block=0, ehandle=0x6dcf50) at pass1.c:1709
pb=0x7fffffffdfe0, start_block=0, ehandle=0x6dcf50) at pass1.c:1737
pctx=0x7fffffffe100, pb=0x7fffffffdfe0) at pass1.c:1842
block_buf=0x6c4330 "\373\212#") at pass1.c:1920
The source of the NULL bitmap is fs on stack frame 2:
(gdb) up 2
inuse=-1) at alloc_stats.c:78
78 ext2fs_unmark_block_bitmap(fs->block_map, blk);
Addresses-SourceForge-Bug: #2971800
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the user grows a partition bigger than 2**32 blocks, e2fsprogs
1.41.x is not going to be able to support resizing the filesystem,
since it doesn't have > 2**32 block support. However, e2fsck should
still work, so the system administrator doesn't get stuck.
Addresses-Launchpad-Bug: #521648
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I guess the message wasn't scary enough for users who are just smart
enough to really get themselves in deep doo-doo. Let's make it even
scarier.
Addresses-Launchpad-Bug: #537483
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A user was surprised when -n -D caused the file system to be opened
read/write, and then outsmarted himself when e2fsck asked the question:
WARNING!!! Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.
Do you really want to continue (y/n)?
This is partially our fault for not documenting the fact that -D
overrode opening the filesystem read-write. But the bottom line is it
much safer if -n *always* opens the file system read-only, so there
can be no confusion. This means that we have to disable certain
combination of options, such as "-n -c", "-n -l", and "-n -L", and
"-n -D", but the utility of these combinations is pretty low, and
is more than offset by making e2fsck idiot-proof.
Addresses-Launchpad-Bug: #537483
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is the userspace side of Jiaying's EOFBLOCKS patch. With
Aneesh's patches for .33, Jiaying's patch, and this one, xfstests
013/fsstress (even with direct IO enabled) has held up through many
runs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsprogs 1.41.10 introduced a regression (in commit b71e018) where
e2fsck -fD can corrupt non-indexed directories when are exists one or
more file names which alphabetically sort before ".". This can happen
with ext2 filesystems or for small directories (take less than a
block) which contain filenames that begin with a space or some other
punctuation mark.
Fix this by making sure we never reorder the '.' or '..' entry in the
directory, since they must be first.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pass 1 has a test to see if a special file is really a directory.
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The broken_system_clock allows the time to be in the future when in
preen mode. It's useful for people who have, as the name implies,
broken system clocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsck_get_alloc_block() callback is used so that if the ext2fs
library needs to allocate blocks internally (most notably by the
extents functions), e2fsck's internal block usage map is consulted
since it is the only thing that can be trusted during a large part of
e2fsck's operation.
Change it to update the on-disk bitmap if it is loaded. This reduces
the number of spurious differences found in pass #5.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In pass 2, when allocating new blocks for holes in directories, use
ext2fs_set_bmap() instead of ext2fs_block_iterate2() with a helper
function so that the newly allocated directory blocks are correctly
assigned in extent-mapped directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Directories are not allowed to be sparse; the code for scanning
extent-mapped directories was not calling ext2fs_add_dir_block() for
missing directory blocks, so we weren't catching this form of file
system corruption. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The check that determines whether an directory needs to be have an
index added to it depends on i_size. So move it after we have fixed
up i_size so that we reliable will rehash a directory that needs it,
even if its i_size field was originally incorrect. Otherwise, a
second run of e2fsck would be needed before the directory gets an
index added.
Thanks to Mikulas Patocka for providing a sample file system which
demonstrated this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The old method for detecting directories with holes depended on i_size
being correct, even though the correct value of i_size hadn't been
calculated yet. Hence, a directory inode with holes and an i_size of
0 would require two e2fsck passes to fix completely.
The replacement method for determining whether or not
ext2fs_add_dir_block() should be called is more reliable, and reduces
the size of e2fsck and makes the code more readable as a bonus.
Thanks to Mikulas Patocka for providing a sample file system which
demonstrated this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Duplicate directory entries were not necessarily getting found and
fixed for non-indexed directories, since we were sorting these
directories by inode number, and the duplicate entry code assumed the
entries were getting sorted by name or directory name hash.
Addresses-Sourceforge-Bug: #2862551
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixes build problem on systems where gettext() isn't in libc,
such as FreeBSD.
Signed-off-by: Matthias Andree <matthias.andree@gmx.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unfortunately, due to Windows' unfortunate design decision to
configure the hardware clock to tick localtime, instead of the more
proper and less error-prone UTC time, many users end up in the
situation where the system clock is incorrectly set at the time when
e2fsck is run.
Historically this was usually due to some distributions having buggy
init scripts and/or installers that didn't correctly detect this case
and take appropriate countermeasures. However, it's still possible,
despite the best efforts of init script and installer authors to not
be able to detect this misconfiguration, usually due to a buggy or
misconfigured virtualization manager or the installer not having
access to a network time server during the installation process. So
by default, we allow the superblock times to be fudged by up to 24
hours. This can be disabled by setting options.accept_time_fudge to
the boolean value of false in e2fsck.conf. The old
options.buggy_init_scripts is left for backwards compatibility.
Since we are now accepting the 24 hour time fudge by default, there is
no longer a need to install an Ubuntu-specific e2fsck.conf file, so we
can remove it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck was not properly printing the i_blocks field in filesystem
corruption messages, and it was not properly checking i_blocks_hi and
i_blocks_lo, either. This commit fixes this.
Thanks to Felipe Conteras for pointing this out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Non-expert users get confused when they see messages like this:
Illegal block #-1 (2291965952) in inode 176. CLEARED.
So change it to be something a little bit more understandable:
Illegal indirect block (2291965952) in inode 176. CLEARED.
Addresses-SourceForge-Bug: #2871782
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit forces the use of the system-provided blkid or uuid header
files if we are using the system-provided blkid or uuid libraries.
This avoids using the in-tree header files with the system libraries.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Blocks per group and group desc count are both 32-bit; multiplied they
produce a 32-bit quantity which overflowed.
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On a very low-memory system, where ext2fs_check_desc() fails because
it can't allocate a block bitmap, catch this error and report it
immediate. This avoids something like this, which could scare and
mislead the user:
e2fsck: Group descriptors look bad... trying backup blocks...
Media was not cleanly unmounted, check forced.
Pass 1: Checking inodes, blocks, and sizes
Error allocating block bitmap (1): Memory allocation failed
e2fsck: aborted
Addresses-Debian-Bug: #509529
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Very often all the block group descriptors will have bad checksums, so
don't force the user answer 'yes' many, many times.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If multiple blocks of a block group's inode table overlaps with other
file system blocks, only ask once for each block group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the filesystem feature FLEX_BG is enabled, the inode table and
bitmap blocks can be located anywhere in the inode table. So for
FLEX_BG filesystems, new_table_block() now tries allocate in the block
group's flex_bg first, and if there is no space in the local flex_bg,
then try to allocate from the whole filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixed a bug where e2fsck would report that last mount time was in the
future when it was really the last write time that was in the future.
Also, since people can't seem to believe that (a) their distribution
has buggy init scripts, or (b) their CMOS/RTC clock or backup battery
is dead, print the incorrect time and the current system time.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unfortunately, distributions like Ubuntu seem to have buggy init
scripts that run e2fsck and mount the root filesystem before making
sure the system time and time zone is correctly set. As a result, a
filesystem's last write and last mounted time can be set in future.
The buggy_init_scripts configuration option will stop e2fsck from
aborting the boot process, but it also inhibits the superblock times
from getting fixed. This causes resize2fs to refuse to resize the
filesystem, even after running e2fsck on the file system. To deal
with this, we need to fix the superblock write times unconditionally.
Addresses-Launchpad-bug: #373409
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
check_block_bitmap() calculates the block number of superblock in the current
block group but it's not used.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If unused range of the bitmap has an unmarked bit, check_[inode/block]_end()
marks all bits in the range. However, we know that the checked bits are marked.
So this patch fixes loop counter to mark from the unmarked bit.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the continue statement because it calls at the end of the loop.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some people don't want to see the concise "kernel-style" make output.
This configure option allows build engines that want to see the full
set of commands executed by the makefile to get what they want. Most
people will find this more distracting than useful, unless they need
to debug the Makefiles.
(It is not necessary to rerun configure to enable this verbose make
output temprarily; if a developer wants to do a quick debug of a
directory's makefile, he or she can simply edit the definition of the
$(E) and $(Q) variables in the Makefile; instructions can be found in
the MCONFIG file which is included in at the beginning of every
Makefile.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs makefiles were using the same Makefile variable
LIBCOM_ERR for the link-line arguments as well as the dependencies.
Since LIBCOM_ERR can now include non-file arguments such as
"-lpthread", we need to use a separate DEPLIBCOM_ERR variable that
only has build file dependencies.
Do the same thing for STATIC_LIBCOM_ERR and PROFILED_LIBCOM_ERR.
Addresses-Sourceforge-Patches: #2813809
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously e2fsprogs interpreted 0 for a rec_len of 65536 (which could
occur if the directory block is completely empty in 64k blocksize
filesystems), while the kernel interpreted 65535 to mean 65536. The
kernel will accept both to mean 65536, and encodes 65535 to be 65536.
This commit changes e2fsprogs to match.
We add the encoding agreed upon for 128k and 256k filesystems, but we
don't enable support for these larger block sizes, since they haven't
been fully tested.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The new ext2fs_super_and_bgd_loc2() function has some changes aside
from just blk64_t support. Lets make sure that the interfaces are
sane by adding libext2fs support early to get the new API tested here.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
e2fsck_pass5() checks whether the inode and block allocation bitmaps
are consistent. However, if EXT2_BG_[INODE/BLOCK]_BITMAP is set to a
ext4's block group, most of its bitmap is uninitialized (0). In that
case, we can optimize e2fsck's pass 5 by checking the entire range of
an uninitalized block group instead of checking bit by bit.
This can speed up e2fsck pass 5 by up to 80%:
+-----+--------------------+--------------------+
| | old e2fsck | new e2fsck |
|Pass | time(s) | time(s) |
| | real | user |system| real | user |system|
+-----+------+------+------+------+------+------+
| 1 | 5.70| 3.29| 0.50| 5.66| 3.21| 0.54|
| 2 | 3.33| 0.80| 0.19| 3.40| 0.82| 0.23|
| 3 | 0.01| 0.00| 0.00| 0.01| 0.00| 0.00|
| 4 | 1.04| 1.04| 0.00| 1.05| 1.04| 0.00|
| 5 | 19.60| 17.27| 0.06| 3.53| 1.21| 0.05|
+-----+------+------+------+------+------+------+
|Total| 29.94| 22.57| 0.80| 13.90| 6.47| 0.86|
+-----+------+------+------+------+------+------+
Comparison of e2fsck time on an ext4 500GB partition (20% blocks used)
Machine environment:
CPU: Intel(R) Xeon(TM) CPU 3.00GHz
Memory: 1GB
Kernel: linux-2.6.29-git2
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs programs have historically just said that they operate
on ext2 and ext3 file system in their man pages. Update them to say
that they also operate on ext4 file systems.
Addresses-Launchpad-bug: #381854
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where the block group descriptors appear corrupt, e2fsck
will try to use the backup superblock. However, it could be that the
backup superblock itself is completely corrupted, in which e2fsck
should go back to the original superblock instead of refusing to fix
the file system.
Addresses-Debian-Bug: #516820
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext3 filesystems don't care if i_file_acl_hi is non-zero in some
inode, and newer kernels should ignore this field (although 2.6.29 and
older kernels will not). So e2fsck should fix this without aborting
an e2fsck preen operation.
Addresses-Debian-Bug: #526524
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The patch below adds a function, ext2fs_extent_open2(), that behaves
as ext2fs_extent_open(), but will use the user-supplied inode
structure when opening an extent instead of reading the inode from
disk. It also changes several of the calls to extent_open() to use
this enhancement.
Signed-off-by: Nic Case <number9652@yahoo.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
in the case of ! defined RESOURCE_TRACK, so that we can clean up #ifdef
throughout e2fsck source.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On ext2, time tracking for pass1 includes both error detection and
specific type of fs fix-up phase (e.g. block referenced by multiple
inodes). The multi-reference fix-up phase some time take significant
amount of time to complete. We would like to track time spent in sub
component of pass1 by having a finer granularity during pass1b through
pass1d phase.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use unsigned values for printing memory tracking to avoid overflows.
The mallinfo() data is currently signed ints, but it might change in
the future so we may as well compute/print unsigned longs.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Restart e2fsck only once in case of multiple inodes in uninit range.
Display correct inode number during BG_INO_UNINIT and INOREF_IN_USED errors.
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a regression in e2fsprogs 1.41.5 which would undo updates to the
block group descriptors after a journal replay, caused by commit
b7c5b403. We now use ext2fs_free() instead of ext2fs_close() to make
sure we the library will never try to write out superblock or block
group descriptors.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
One of our customers hit a temporary IO error during an e2fsck run during
the read from the journal. It seems that the read error resulted in
e2fsck automatically discarding the journals and recreating them on several
filesystems on this node without any prompting from the user:
end_request: I/O error, dev sdg, sector 484832
Buffer I/O error on device sdg, logical block 60604
fsck-sdg[8276]: ls2-OST024c: Superblock has an invalid ext3 journal (inode 8).
fsck-sdg[8276]: CLEARED.
fsck-sdg[8276]: *** ext3 journal has been deleted - filesystem is now ext2
only ***
fsck-sdg[8276]: ls2-OST024c was not cleanly unmounted, check forced.
fsck-sdg[8276]: ls2-OST024c: Journal inode is not in use, but contains data.
CLEARED.
fsck-sdg[8276]: ls2-OST024c: Recreate journal to make the filesystem ext3
again?
fsck-sdg[8276]: FIXED.
fsck-sdg[8276]: Creating journal (32768 blocks): Done.
fsck-sdg[8276]:
fsck-sdg[8276]: *** journal has been re-created - filesystem is now ext3 again
***
fsck-sdg[8276]: ls2-OST024c: 39818/20183248 files (8.2% non-contiguous), 222122257/779902976 blocks
fsck-sdg[8276]: exit code 1 (file system errors corrected)
The following patch moves the e2fsck error handler initialization earlier
in the e2fsck startup code before the journal is processed, so that the
user will be prompted for an action. This is the first IO that is not
part of ext2fs_open() where fs->io is first initialized.
It doesn't seem possible to initialize the error handlers for the initial
filesystem open without changing the prototype for ext2fs_open2(). If we
are getting a new ext2fs_open3() prototype for 64-bit it might make sense
to add at least "read_error" as a parameter ("write_error" is not strictly
necessary for the open and could be set afterward).
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If ext2fs_extent_open() fails due to a corrupt extent header, and the
user declines to clear the inode, check_blocks_extents() should bail
out; otherwise, it will cause a core dump due a null pointer
dereference.
Addresses-Sourceforge-Bug: #2791794
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cleanup whitespace in the problem.h and problem.c files. Removes a
bunch of places where tabs follow spaces, whitespace on empty lines, etc.
I didn't reformat the indenting of the entire problem.h error codes,
but there is some room for doing this...
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've hit a number of cases where the error codes in problem.h have
been assigned duplicate values compared to problems in our own e2fsck
patches, and this can lead to confusing and difficult to find bugs
in e2fsck (e.g. wrong problem messages, incorrect repair action, etc).
Attached is a test case for the problem.c file to ensure that the
problem table is sorted and does not contain any duplicate values.
Having the problem table sorted allows the correctness checking to be
very simple, and if it ever became important for performance we could
use binary searching of the problem table for the specific problem code.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we are checking a mounted filesystem (typically the root
filesystem, mounted read/only) and the NEEDS_RECOVERY flag is not set,
skip all of the checks associated with making sure the journal is
consistent. There is the very slight possibility we could lose if the
NEEDS_RECOVERY flag was somehow cleared even though there was data in
the journal, but this has practically never happend in practice, and
it reduces the number of reads required at boot-time, which is a big
deal when trying to reduce boot times with HDD's.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck needs to check to see if the backup superblock differs from the
primary superblock. Previously it was doing so by calling
ext2fs_open(), which does a lot of unnecessary work, including reading
all of the backup block group descriptors. Avoid this by reading in
the backup superblock directly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move check_resize_inode() out of check_super_block(), since we only
need to test the resize_inode for correctness only if the filesystem
requires checking. This change avoids a lot of I/O operations which
slows down a 1 second boot.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixed a potential bug where by partial returns from the write(2)
system call could lost characters to be sent to external progress bar
display program.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Running e2fsck against a 14.5TB filesystem with -tt it reported
-200904kB for RAM usage in pass3 instead of the correct 2300773kB.
The RAM usage statistics were being printed with %d instead of %u.
Also fix a few places using %ld for inode numbers instead of %lu.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we resize online, the primary superblock gets copied to all
the backups, and of course since we're mounted the NEEDS_RECOVERY
flag is set. A subsequent fsck will find the backups have the
NEEDS_RECOVERY flag set while the primary does not, and this
forces a full fsck pass.
I think this flag can be safely ignored in the flag comparisons.
Addresses-Red-Hat-Bugzilla: #471925
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The coverity scanner found this one.
If a line in modules.dep has a ":" but no "/" then:
if ((cp = strchr(buf, ':')) != NULL)
*cp = 0;
else
continue;
if ((cp = strrchr(buf, '/')) != NULL)
cp++;
/* XXX else cp is still null */
i = strlen(cp);
... we will deref a null pointer (cp). This can be
demonstrated by putting a line like:
foo.ko:
into modules.dep. The below change just says that if no "/" is
found, treat the whole string as the module name.
Addresses-Red-Hat-Bugzilla: #486997
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The other problem codes associated with failing to create the
lost+found directory are non-fatal, and this one should be non-fatal
as well. The two places which call e2fsck_get_lost_and_found()
already deal with a failure to create the directory, so there's no
point making this be a fatal error.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
An deliberately corrupted filesystem with an insanely large
s_first_ino field could cause e2fsck to crash with a seg fault.
Thanks to Eric Sesterhenn for supplying test cases which demonstrated
this issue.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck was using a fixed-size 8k buffer for replaying blocks from the
journal. So attempts to replay a journal on filesystems greater than
8k would cause e2fsck to crash with a segfault.
Thanks to Miao Xie <miaox@cn.fujitsu.com> for reporting this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4 filesystem uses journals too, so remove "ext3" from the
problem descriptions involving journals.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A corrupted interior node in an extent tree would cause e2fsck to
crash with the error message:
Error1: Corrupt extent header on inode 107192
Aborted (core dumped)
Handle this and related failures when scanning an inode's extent tree
more robustly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the directory is packed with no slack space, as soon as any new
directory entries are added, leaf nodes end up getting split and
directory ends up getting very inefficient.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Report whether a fragmented inode is a directory or a file, as this is
highly useful for determining what is going on with an ext4 filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Track the number of non-contiguous files and directories so we can
give more detailed information in verbose mode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some of these could affect filesystems between 2^31 and 2^32-1 blocks.
Thanks to Valerie Aurora Henson for pointing out the problems in
lib/ext2fs/alloc_tables.c, which led me to do a "make gcc-wall" scan
over the source tree.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It's been a while since I've done a build using "configure
--enable-profile", and some bitrot had set into the Makefiles...
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a block device is read-only, e2fsck -p gets into an infinite loop
trying to preenhalt, closing and flushing the fs, which tries to flush
the cache, which gets a write error and calls preenhalt which tries to
close and flush the fs ... ad infinitum.
Per Ted's suggestion just flag the ctx as "exiting" and short-circuit
the infinite loop.
Tested by running e2fsck -p on a block device set read-only by BLKROSET.
Thanks to Vlado Potisk for reporting this.
Addresses-Red-Hat-Bugzilla: #465679
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some recent changes had caused diet libc support to bitrot. Fix up
missing header files and other portability fixups needed for dietlibc.
(Many of these changes also improve general portability.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes a regression that was introduced in commit dcc91e10 (it
showed up first in e2fsprogs 1.40.7). Since we weren't freeing the
filesystem handle, ext2fs_open2() was returning EBUSY, and so this
caused a failure in the code that would automatically determine the
filesystem block size when only the superblock number was specified by
the user.
This was discussed in http://ubuntuforums.org/showthread.php?t=789323,
and Matthias Bannach pointed this out to me, for which I am very
grateful.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A few e2fsck problem messages supply their own prompt, and set a
prompt value of PROMPT_NULL. We have to check for this case, and not
pass the null string to _(), since that will result in the translation
header getting printed, like this:
Run journal anywayProject-Id-Version: e2fsprogs
Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>
POT-Creation-Date: 2008-02-28 21:45-0500
PO-Revision-Date: 2006-05-23 11:12+0000
Last-Translator: Somebody32 <som32@mail.ru>
Language-Team: Russian <ru@li.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 &&
n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;
X-Launchpad-Export-Date: 2008-05-28 00:43+0000
X-Generator: Launchpad (build Unknown)
<y>? yes
Addresses-Launchpad-Bug: #246892
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pass in -rpath-link option to the linker so that blkid will build
correctly on systems that don't have libcom_err.so.2 installed.
Fix debugfs to only try to link with -ldl when building without shared
libraries; with ELF shared libraries, the library which requires -ldl
(libss.so) can required the library dependency itself.
Fix how we build tune2fs.static so that we use @LDFLAG_STATIC@, via
$(LDFLAGS_STATIC), instead of hard-coding the use of -static.
Addresses-Sourceforge-Bug: #2088537
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In order to make it possible for the test_io manager to be compiled in
by default, make all of the programs that might try to use it to only
do so if the environment variables TEST_IO_FLAGS and TEST_IO_DEBUG are
set.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The rec_len field in the directory entry is 16 bits, so if the
filesystem is completely empty, rec_len of 0 is used to designate
65536, for the case where the directory entry takes the entire 64k
block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix error message to print the depth of a corrupt htree directory.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This makes it easier to locate the problem code in question.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch changes the e2fsck_write_bitmaps() function to write out the
block and inode bitmaps together, instead of writing them in two passes.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
__LITTLE_ENDIAN is set by the glibc headers, and isn't portable. We
should be using WORDS_BIGENDIAN, which is set by autoconf.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For inodes with blocks preallocated with FALLOC_FL_KEEP_SIZE, e2fsck
complained about i_size being too small. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A misunderstanding C's precedence rules and the meaning of
s_log_block_size meant that we were capping the maximum size of
extent-based files at 8GB instead of the 64TB that it should be for
filesystems with 4k block sizes.
Addresses-Kernel-Bugzilla: #11341
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also added support for "e2fsck -E fragcheck" which issues a
comprehensive report of discontiguous file extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Makefile should use BUILD_CFLAGS instead of ALL_CFLAGS since it
will be built for the host, not the target.
Addresses-Sourceforge-Bug: #2019287
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is needed so that "make check" works in the e2fsck library even
if the shared libraries are not yet installed, and so that we run
those programs against the version of the libraries built in the build
tree.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Solaris's header files are very picky about which C compiler can be
used for SUSv3 conformance. Use of C99 is not compatible with SUSv2
(_XOPEN_SOURCE=500), and C89 is not compatible with SUSv3
(_XOPEN_SOURCE=600). Since we need some SUSv3 functions, consistently
use SUSv3 so that e2fsprogs will build on Solaris using c99.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Gcc only supports __builtin_expect for gcc versions 2.96 and up.
Since it's tricky to check for gcc 2.95 vs 2.96 (and either are only
used on really ancient systems anyway), we only use this optimization
on 3.x and newer versions of gcc.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Solaris polutes the C namespace with kmem_cache_t when
you include in/netinet.h is included, so rename kmem_cache_t
to lkmem_cache_t.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This:
Truncating bigfile to 14680064000000
Pass 1: Checking inodes, blocks, and sizes
Inode 49154, i_size is 14680064000000, should be 0. Fix<y>?
is a bit unexpected. It's because the size is being checked against
the max sizes for bitmap files, not extent-based files.
Nick saw this with his 14TB file.
Patch below applies different size limits to the different file
formats.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The logical block numbers must be monotonically increasing, and there
must not be any overlapping extents. If any are found, report them as
filesystem corruption.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Wire up callback functions for ext2fs_alloc_block() and
ext2fs_block_alloc_stats() so that we use the ctx->block_found_map
block bitmap to determine which new block we should allocate, and then
to update the block_found_map bitmap if the extent functions need to
allocate or release blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_extent_delete() will leave the extent handle pointing at the
next extent --- except if the last extent in the node. To deal with
this last case, call ext2fs_get_extent_info() and stop scanning after
processing info->num_entries extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_delete_extent() deletes the current extent and moves to the
next extent (if present). So we need to skip moving to the next
extent and get the (new) current extent and check it before moving on.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
While synchronizing e2fsck's recovery.c with the latest 2.6 kernel
sources, I discovered a serious bug that apparently had been fixed in
the kernel sometime between Deceber 2003 and April 2005, but which had
not been carried over to e2fsprogs. Specifically, when blocks whose
first 4 bytes are JFS_MAGIC_NUMBER (0xc03b3998) are written into the
journal, the first 4 bytes zero'ed out. A one character typo meant
that when the blocks were replayed by e2fsck, the JFS_MAGIC_NUMBER
would not be restored.
Oops.
Fortunately, it is *highly* unlikely that ext4 metadata blocks will
contain that magic number in the first four bytes, and data=journalled
is a relatively rarely used.
This commit fixes this bug, as well as updating e2fsck's recovery.c to
be in sync with 2.6.25.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This simplifies the code, and using the uninit_bg with the inode table
lazily initialized is just as good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allow the old name of uninit_groups when converting feature names for
backwards compatibility for scripts running mke2fs and tune2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
pass1 was checking that an "extent's" start+len did not extend
past the last filesystem block, but unless we are at a leaf
block, the physical block is that of a node in the tree, and
the length may include sparseness. The test is only valid
for leaf blocks.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In current git there is a double free on ctx->filesystem_name in the
end of main() and in e2fsck_free_context, causing e2fsck to abort at
the end of pass5.
Signed-off-by: Matthias Koenig <mkoenig@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fedora seems to be gearing up to add
-Werror-implicit-function-declaration
to the standard build flags, so I thought I'd get out ahead
of this one...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Extent data is shared with the i_block[] space in the inode,
but it is always swapped on access, not when the inode is read.
In e2fsck/pass1.c we must be careful when checking validity
of the extents flag on the inode. If the flag was set when
the inode was read & swapped, then the extents data itself
(in ->i_block[]) was NOT swapped, so testing for a valid
extent header requires some swapping first. Then, if we
ultimately set the extents flag, all of i_block[] must be
re/un-swapped.
This passes the f_extent regression test on both ppc & x86.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a check for the UNINIT_BLOCKS flag set in the last group. The kernel
patch doesn't handle this gracefully, because it assumes there are a full
set of blocks in each group marked UNINIT_BLOCKS. The kernel should be
fixed up, but in the meantime this avoids hitting the problem, and is
more consistent with lazy_bg not marking the last group UNINIT.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the function signature so that ext2fs_set_gdt_csum() returns an
error code.
If the inode bitmap hasn't been loaded return EXT2_ET_NO_INODE_BITMAP.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also make sure the device name has no spaces in it, to avoid confusing
displays, and make ctx->filesystem_name and ctx->device_name allocated
memory to avoid potential problems in the future.
Addresses-Launchpad-Bug: #203323
Addresses-Sourceforge-Bug: #1926023
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a negative progress argument is given to -C, initially suppress the
progress information. It can be enabled later by sending the e2fsck
process a SIGUSR1 signal.
Addresses-Launchpad-Bug: #203323
Addresses-Sourceforge-Bug: #1926023
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_extent_get() function was not OR-ing together UNINIT
and LEAF flags in the case where an extent was both; so if we
had an extent which was both uniint and leaf, pass1 would bail
out where depth == max_depth but was not marked as leaf, and
e2fsck (from the next branch) would abort with:
e2fsck 1.40.8 (13-Mar-2008)
Pass 1: Checking inodes, blocks, and sizes
Error1: No 'down' extent
Aborted
Also, if the error is encountered again, print the inode number
to aid debugging until it's properly handled, at least.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch has all the necesary pieces to open and fix filesystems created
with the uninit block group feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch includes the changes required to e2fsck to understand the
nlink count changes made in the kernel.
In e2fsck pass 4, when we fetch the actual link count, if it is
exceeds 65,000 we set the link count to 1. We silently fix the
situation where the nlink count of the directory is 1, and there are
fewer than 65,000 subdirectories, since since that can happen
naturally.
Patch originally from CFS, significantly rewritten by Theodore Ts'o.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the prompt so it is clear to the user that e2fsck will be
clearing the htree information, not the directory inode itself, when
the htree information has proven to be corrupt.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a directory's i_size is bigger than the number of blocks, don't try
to allocate extra empty blocks to the end of the directory; there's no
real point to do that. Also, if a directory's i_size is not a
multiple of the blocksize, flag that as a mistake so it can be fixed.
This more elegantly addresses the problem which was found on Bas van
Schaik's filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Turns out a "should never happen" error can indeed happen very easily
if a directory with an htree index has an incorrect, and too-large,
i_size field. This patch fixes this so that we handle this situation
gracefully, allowing filesystems with this error to be fixed.
In another patch I will clean up the specific problem which caused the
internal "should never happen" error from happening at all, but patch
will prevent e2fsck from crashing, and prompt the user to remove the
htree index, so it can be rebuilt again after pass 3.
Thanks to Bas van Schaik at Tetra for giving me access to his system
so this problem could be debugged.
Addresses-Launchpad-Bug: #129395
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Stop clearing the EXT2_FEATURE_RO_COMPAT_LARGE_FILE flag automatically
if there are no large files in the filesystem. It's been almost a
decade since there have been kernels that don't support this flag, and
e2fsck clears it quietly without telling the user why the filesystem
has been changed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Document in the e2fsck man page that e2fsck finds duplicate filenames
only when the -D option is passed to e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add vertificaton of the in-inode EA information, and allow in-inode
EA's to have a checksum.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Factor out code to clear a bogus inode and update e2fsck's internal
data structures accordingly into a common routine,
e2fsck_clear_inode(). This saves about 200 bytes in the compiled x86
e2fsck executable, and makes the code more maintainable in the
long-term.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also removed the --enable-dynamic-static configure option.
Unfortunately the usefulness of building e2fsck statically is gone on
all modern distributions, since everything else on the system is built
dynamically these days. In fact on some distributions it is almost
impossible to build programs statically any more.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Recent e2fsprogs (1.40.3 and higher) fsck compares primary superblock to
backups, and if things differ, it forces a full check. However, the
kernel has a penchant for updating flags the first time a feature is
used - attributes, large files, etc.
This is a bad idea, and we should break the kernel of this habit,
especially for the ext4 feature flags. But for now, let's make e2fsck
avoid forcing a full check and backup except when absolutely
necessary.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously "e2fsck -fD" on a non-htree directory would sort the
directory alphabetically by name. That's stupid. Better to sort the
directory by inode number, since that will optimize performance much
more significantly than sorting by name!
Addresses-Sourceforge-Feature-Request: #532439
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add an explanation of how e2fsck might decide to optimize a few
directories even without the -D option being specified.
Addresses-Debian-Bug: #441872
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add some additional checks, primarily in resize2fs and in the rarely
used (and soon to-be-deprecated) e2fsck byte-swap filesystem function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ubuntu has init script and installer issues which cause them to have
significant problems with time zones. This is compounded with a
relatively inexperienced user base who want to dual boot with Windows
and so have their hardware clocks tick localtime.
Addresses-Ubuntu-Bug: #131201
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The FLEX_BG feature allows the inode table, block bitmap, and inode
bitmaps to be located anywhere in the filesystem. Update e2fsck and
libext2fs's checking code to recognize this.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
e2fsck/super.c | 14 ++++++++++++--
lib/ext2fs/check_desc.c | 15 +++++++++++++--
2 files changed, 25 insertions(+), 4 deletions(-)
Avoid pointer cast and call e2fsck_write_inode_full() the same way
as check_inode_extra_space() does.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the primary superblock differs from the backup superblock in
certain key respects, force a full check (if e2fsck was invoked in
preen mode). If the filesystem check passes cleanly, and the
filesystem was opened in read/write mode, then write the primary
superblock to all of the backups.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck adds or deletes any of the feature bitmasks, clear
EXT2_FLAG_MASTER_SB_ONLY so the backup superblocks are updated when
e2fsck finishes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If superblock mount time or last write time is in the future, and the
user refuses to fix the problem, don't mark the filesystem as being
invalid and needing to be checked.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Ubuntu init scripts don't properly set the system time correctly
from hardware clock if the hardware clock is configured to tick local
time instead of GMT time.
Work around this as best as we can by providing an option in
/etc/e2fsck.conf which can be set on Ubuntu systems:
[options]
buggy_init_scripts = 1
Addresses-Debian-Bug: #441093
Addresses-Ubuntu-Bug: #131201
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck currently only retries with the backup superblock if the
primary superblock is missing (e.g., overwritten with garbage). If
the superblock is just corrupted enough that it looks like ext2/3/4
superblock, but it is corrupt enough that ext2fs_open2() returns an
error, e2fsck stops without retrying. Let's fix this oversight.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
atoi() does not check for errors so it shouldn't be used for human
input. For example, if the user enters the command "e2fsck -C -n" and
forgets that -C requires an argument, the -n will be used as the
argument to -C, and not parsed as an option. When using sscanf(),
this error case can be detected.
Addresses-Debian-Bug: #435381
Signed-off-by: Bernd Schubert <bs@q-leap.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The need for fixing byte-swapped filesystems is long-gone, and this is
getting in the way of cleaning up e2fsprogs's bitmaps code. So let's
get rid of it; modern kernels haven't been able to deal with a
byte-swapped filesystem in in about 9 years.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allow files to be preallocated on-disk up to the next multiple of the
system's page size without complaining about extra blocks.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch instruments the libext2fs unix I/O manager and adds bytes
read/written and data rate to e2fsck -tt pass/overall timing output.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new functions ext2fs_{set,get}_{inode,block}_bitmap_range()
which allow programs like e2fsck, dumpe2fs, etc. to get and set chunks
of the bitmap at a time.
Move the representation details of the 32-bit old-style bitmaps into
gen_bitmap.c.
Change calls in dumpe2fs, mke2s, et. al to use the new abstractions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A recent change to e2fsck_add_dir_info() to use tdb files to check
filesystems with a very large number of filesystems had a typo which
caused us to resize the wrong data structure. This would cause a
array overrun leading to malloc pointer corruptions. Since we
normally can very accurately predict how big the the dirinfo array
needs to be, this bug only got triggered on very badly corrupted
filesystems.
Thanks to Andreas Dilger for submitting the test case which discovered
this problem, and to Kalpak Shah for writing a random testing script
which created the test case.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Recently, one of our customers found this message in pass2 of e2fsck
while doing some regression testing:
"Entry '4, 0x695a, 0x81ff, 0x0040, 0x8320, 0xa192, 0x0021' in ??? (136554) has
rec_len of 14200, should be 26908."
Both the displayed rec_len and the "should be" value are bogus. The
reason is that salvage_directory sets a offset beyond blocksize
leading to bogus messages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
profile_set_default() sets the value of the pseudo file "<default>".
If the file "<default>" had previously been passed to profile_init(),
then def_string parameter will be parsed and used as the profile
information for the "<default>" file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Turkish translation has a bug in it where it has the translation
of "E@e '%Dn' in %p (%i)" to "E@E". This causes @E to be expanded at
@E, recursively, forever, until the stack fills up e2fsck core dumps.
Fix it by stopping after a recursive depth of 10, which is far more
than we need.
Addresses-Sourceforge-Bug: 1646081
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add an extra validity test in check_ext_attr(). If an attribute's
e_value_size is zero the current code does not allocate a region for it
and as a result the e_value_offs value is not verified. However, if
e_value_offs is very large then the later call to
ext2fs_ext_attr_hash_entry() can dereference bad memory and crash
e2fsck.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Jim Garlick <garlick@llnl.gov>
The original code only checked the direct blocks to make sure the
journal inode was sane. Unfortunately, if some or all of the indirect
or doubly indirect blocks were corrupted, this would not be caught.
Thanks to Andreas Dilger and Kalpak Shah for noticing this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the journal inode was corrected from s_jnl_blocks, write the fixed
journal inode back to disk.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
If the journal had been removed because it was corrupt, the
E2F_FLAG_JOURNAL_INODE flag will be set. If this flag is set, then
recreate the filesystem after checking the filesystem.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
This patch changes ext2fs_open() to set EXT2_FLAG_MASTER_SB_ONLY by
default. This avoids some problems in e2fsck (reported by Jim Garlick)
where a corrupt journal can end up writing the bad superblock to the
backups. In general, only e2fsck (after the filesystem is clean),
tune2fs, and resize2fs should change the backup superblocks by default.
Most callers of ext2fs_open() should not be touching anything where the
backups should be touched. So let's change the defaults to avoid
potential problems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Linux floppy driver is a bit different from the other block device
drivers, in that if the device has been opened with O_EXCL, it disallows
another open(), even if the second open() does not have the O_EXCL flag.
So this patch moves the call to ext2fs_get_device_size() so that if it
returns EBUSY, e2fsck can close the filesystem, retry the device size,
and then reopen it. This rather complicated approach is required since
we need to know the blocksize of the filesystem before we can call
ext2fs_get_device_size().
Addresses Debian Bug: #410569
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I've been investigating why e2fsck refuses to restore the backup superblock
of a partition with a broken primary superblock.
The partition in question has a block size of 4096, and mke2fs reports that
backup superblocks were created on blocks 32768, 98304, 163840, ...
When running e2fsck, get_backup_sb starts by guessing a block size of 1024
and backup superblock at block 8193. I'm not sure why, but it actually finds
a superblock at this location, so returns a context with superblock 8193,
blocksize 1024.
Later on, ext2fs_open2() tries to process this superblock. It then realises
that the block size value stored in the superblock (4096) does not match what
it was told (1024), so it bails out with EXT2_ET_UNEXPECTED_BLOCK_SIZE. fsck
aborts without fixing the partition.
The following patch solves the problem by discounting superblocks which do
not meet the currently-sought block size.
As a result, block 32768 (blocksize=4096) is now used to restore the backup,
which agrees with the first location that mke2fs listed.
Signed-off-by: Daniel Drake <d.drake@mmm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
At the second conditional iter->file could still be NULL. We need to
check for it again. Should never happen in practice, but better to be
sure.
Coverity ID: 6: Forward Null
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch removes a code snippet from check_ea_in_inode() in pass1 which checks
if the EA values in the inode are sorted or not. The comments in fs/ext*/xattr.c
state that the EA values in the external EA block are sorted but those in the
inode need not be sorted. I have also attached a test image which has unsorted
EAs in the inodes. The current e2fsck wrongly clears the EAs in the inode.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Mke2fs is supposed to set the uid/gid ownership of the root directory when
a non-rooot user creates the filesystem. This wasn't working correctly
if the uid/gid was > 16 bits. In additional, debugfs wasn't displaying
large uid/gid's correctly. This patch fixes these two programs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Another small bug I think: if the root directory contains shared
blocks, e2fsck pass1c search_dirent_proc() will be looking for
one more containing directory than it will ever find, and thus
loses an opportunity to terminate early.
Signed-off-by: Jim Garlick <garlick@llnl.gov>