Each time an extent handle is opened and closed, if the inode has an
extent tree which does not fit in the inode's i_block structure, a
filesystem block buffer was not getting released. Since e2fsck opens
an extent handle for every inode using extents, this can translate to
a very large amount of memory getting lost.
Thanks to Henrik 'Mauritz' Johnson for discovering and pointing out
this leak, which he ran into while running the "rdump" command in
debugfs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs programs have historically just said that they operate
on ext2 and ext3 file system in their man pages. Update them to say
that they also operate on ext4 file systems.
Addresses-Launchpad-bug: #381854
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the test code which is used to build the tst_csum progam from
tst_csum into csum.c under an #ifdef DEBUG to simplify things and to
avoid compile problems caused by not having a prototype for
ext2fs_group_desc_csum().
Addresses-Sourceforge-Bug: #2484331
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
To reduce user confusion, if the /etc/mtab file is missing
ext2fs_check_mount_point and ext2fs_check_if_mounted will return a
new, explicit error code to indicate this case.
Addresses-Debian-Bug: #527859
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where the block group descriptors appear corrupt, e2fsck
will try to use the backup superblock. However, it could be that the
backup superblock itself is completely corrupted, in which e2fsck
should go back to the original superblock instead of refusing to fix
the file system.
Addresses-Debian-Bug: #516820
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add an -a option to the close_filesys command which writes any changes
to the superblock or block group descriptors to all of the backup
superblock locations.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext3 filesystems don't care if i_file_acl_hi is non-zero in some
inode, and newer kernels should ignore this field (although 2.6.29 and
older kernels will not). So e2fsck should fix this without aborting
an e2fsck preen operation.
Addresses-Debian-Bug: #526524
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The patch below adds a function, ext2fs_extent_open2(), that behaves
as ext2fs_extent_open(), but will use the user-supplied inode
structure when opening an extent instead of reading the inode from
disk. It also changes several of the calls to extent_open() to use
this enhancement.
Signed-off-by: Nic Case <number9652@yahoo.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
in the case of ! defined RESOURCE_TRACK, so that we can clean up #ifdef
throughout e2fsck source.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On ext2, time tracking for pass1 includes both error detection and
specific type of fs fix-up phase (e.g. block referenced by multiple
inodes). The multi-reference fix-up phase some time take significant
amount of time to complete. We would like to track time spent in sub
component of pass1 by having a finer granularity during pass1b through
pass1d phase.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tidy up the chattr(1) manpage to completely document all
available options, and differentiate those which are read-only
early in the manpage as well.
* Remove "I" from settable attribute list
* add "e" to 2nd list of settable attributes & descriptions
* Note that h/E/I/X/Z are readonly
* Correct "H" to "h" for huge file attribute description
* fix long_name for indexed directory in flags_array
Addresses-Red-Hat-Bugzilla: BZ#502971
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds new option, +e to chattr. The +e option
is used to convert the ext3 format (non extent) file
to ext4 (extent) format. This can be used to migrate
the ext3 file system to ext4 file system.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use unsigned values for printing memory tracking to avoid overflows.
The mallinfo() data is currently signed ints, but it might change in
the future so we may as well compute/print unsigned longs.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Restart e2fsck only once in case of multiple inodes in uninit range.
Display correct inode number during BG_INO_UNINIT and INOREF_IN_USED errors.
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Without a force flag, don't allow resize2fs to even start resizing
below what it thinks the minimum safe value is.
This may stop resizes which could otherwise proceed with a bit
of space still left, but seems like a reasonably safe thing to do.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The extra padding added to the minimum size calculations:
/*
* We need to reserve a few extra blocks if extents are
* enabled, in case we need to grow the extent tree. The more
* we shrink the file system, the more space we need.
*/
if (fs->super->s_feature_incompat & EXT3_FEATURE_INCOMPAT_EXTENTS)
blks_needed += (fs->super->s_blocks_count - blks_needed)/500;
can go quite wrong if we've already added up more "blks_needed"
than our current size, and the above subtraction wraps. This can
easily happen for a filesystem which is almost completely full.
In this case, just return the current fs size as the minimum and
be done with it.
With this fix we could probably call calculate_minimum_resize_size()
for each resize2fs invocation and refuse to resize smaller than that?
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
http://people.redhat.com/esandeen/livecd-creator-imagefile.bz2
contains an image (for now) which, when resized to 578639, corrupts
the filesystem.
This is a bit crazy, I guess, because the fs currently has only
1 free block, but still, we should be graceful about the failure.
Perhaps it would make sense to check the requested valuea against
the minimum value resize2fs would compute for "-P" and fail (at
least without a force).
But in any case, this exposed 2 bugs when moving that one block
required an extent split, which is what hit the ENOSPC.
For starters, ext2fs_extent_set_bmap() in the "(re/un)mapping last
block in extent" case was replacing the old extent before the
new one was created; when the new extent creation failed, it
left us in an inconsistent state. Simply changing the order of
the two should fix this problem.
Next, ext2fs_extent_insert was calling ext2fs_extent_delete()
on *any* error, including one caused by failure to allocate a new
block to split the node to hold that extent ... the handle was left
unchanged, and we deleted the -original- extent.
As a quick fix for this, just don't do the delete if we fail the split,
though this may need to be smarter. I don't think we have terribly
consistent behavior about where a handle is left on various errors.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a regression in e2fsprogs 1.41.5 which would undo updates to the
block group descriptors after a journal replay, caused by commit
b7c5b403. We now use ext2fs_free() instead of ext2fs_close() to make
sure we the library will never try to write out superblock or block
group descriptors.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
One of our customers hit a temporary IO error during an e2fsck run during
the read from the journal. It seems that the read error resulted in
e2fsck automatically discarding the journals and recreating them on several
filesystems on this node without any prompting from the user:
end_request: I/O error, dev sdg, sector 484832
Buffer I/O error on device sdg, logical block 60604
fsck-sdg[8276]: ls2-OST024c: Superblock has an invalid ext3 journal (inode 8).
fsck-sdg[8276]: CLEARED.
fsck-sdg[8276]: *** ext3 journal has been deleted - filesystem is now ext2
only ***
fsck-sdg[8276]: ls2-OST024c was not cleanly unmounted, check forced.
fsck-sdg[8276]: ls2-OST024c: Journal inode is not in use, but contains data.
CLEARED.
fsck-sdg[8276]: ls2-OST024c: Recreate journal to make the filesystem ext3
again?
fsck-sdg[8276]: FIXED.
fsck-sdg[8276]: Creating journal (32768 blocks): Done.
fsck-sdg[8276]:
fsck-sdg[8276]: *** journal has been re-created - filesystem is now ext3 again
***
fsck-sdg[8276]: ls2-OST024c: 39818/20183248 files (8.2% non-contiguous), 222122257/779902976 blocks
fsck-sdg[8276]: exit code 1 (file system errors corrected)
The following patch moves the e2fsck error handler initialization earlier
in the e2fsck startup code before the journal is processed, so that the
user will be prompted for an action. This is the first IO that is not
part of ext2fs_open() where fs->io is first initialized.
It doesn't seem possible to initialize the error handlers for the initial
filesystem open without changing the prototype for ext2fs_open2(). If we
are getting a new ext2fs_open3() prototype for 64-bit it might make sense
to add at least "read_error" as a parameter ("write_error" is not strictly
necessary for the open and could be set afterward).
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If ext2fs_extent_open() fails due to a corrupt extent header, and the
user declines to clear the inode, check_blocks_extents() should bail
out; otherwise, it will cause a core dump due a null pointer
dereference.
Addresses-Sourceforge-Bug: #2791794
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Linux kernel (since 2.6.29, patch 784aae735d9b0bba3f8b9faef4c8b30df3bf0128)
exports the real DM device names in /sys/block/<ptname>/dm/name.
The sysfs based solution is nicer and faster than scan for devno in
/dev/mapper/.
CC: Milan Broz <mbroz@redhat.com>
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cleanup whitespace in the problem.h and problem.c files. Removes a
bunch of places where tabs follow spaces, whitespace on empty lines, etc.
I didn't reformat the indenting of the entire problem.h error codes,
but there is some room for doing this...
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've hit a number of cases where the error codes in problem.h have
been assigned duplicate values compared to problems in our own e2fsck
patches, and this can lead to confusing and difficult to find bugs
in e2fsck (e.g. wrong problem messages, incorrect repair action, etc).
Attached is a test case for the problem.c file to ensure that the
problem table is sorted and does not contain any duplicate values.
Having the problem table sorted allows the correctness checking to be
very simple, and if it ever became important for performance we could
use binary searching of the problem table for the specific problem code.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The FIEMAP ioctl is more efficient and doesn't require root
privileges. So if it is available, use it in preference to repeated
FIBMAP calls.
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the superblock is clean, and we only need to update
s_kbytes_written, then we only need to update the superblock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we are checking a mounted filesystem (typically the root
filesystem, mounted read/only) and the NEEDS_RECOVERY flag is not set,
skip all of the checks associated with making sure the journal is
consistent. There is the very slight possibility we could lose if the
NEEDS_RECOVERY flag was somehow cleared even though there was data in
the journal, but this has practically never happend in practice, and
it reduces the number of reads required at boot-time, which is a big
deal when trying to reduce boot times with HDD's.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>