This was causing dumpe2fs to crash on the ARM platform when examining
the badblocks list.
Also reverts an incorrect fix made by changeset 38078f692c20
Addresses Debian Bug: #397044
Add support for the new flag EXT2_FLAG_SOFTSUPP_FEATURES flag to
ext2fs_open() , which allows application to open filesystes with features
which are currently only partially supported by e2fsprogs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs and kernel implementation of directory hash tree has a
bug which causes the implementation to be dependent on whether
characters are signed or unsigned. Platforms such as the PowerPC,
Arm, and S/390 have signed characters by default, which means that
hash directories on those systems are incompatible with hash
directories on other systems, such as the x86.
To fix this we add a new flags field to the superblock, and define two
new bits in that field to indicate whether or not the directory should
be signed or unsigned. If the bits are not set, e2fsck and fixed
kernels will set them to the signed/unsigned value of the currently
running platform, and then respect those bits when calculating the
directory hash. This allows compatibility with current filesystems,
as well as allowing cross-architectural compatibility.
Addresses Debian Bug: #389772
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE (0x0040?) - add s_min_extra_isize and
s_want_extra_isize fields to superblock, which allow specifying
the minimum and desired i_extra_isize fields in large inodes
(for nsec+epoch timestamps, potential other uses). Needs RO_COMPAT
flag handling, needs e2fsck support, patch complete, little testing.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_INCOMPAT_64BIT (0x0080) - support for 64-bit block count
fields in the superblock (s_blocks_count_hi, s_free_blocks_count_hi),
large group descriptors (s_desc_size), extents with high 16 bits
(ee_start_hi, ei_leaf_hi), inode ACL (i_file_acl_hi). May also grow
to encompass the previously proposed BIG_BG.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_DIR_NLINK (0x0020?) - allow directories to have
> 65000 subdirectories (i_nlinks) by setting i_nlinks = 1 for such
directories. RO_COMPAT protects old filesystems from unlinking such
directories incorrectly and losing all files therein.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_GDT_CSUM (0x0010?) - store a crc16 checksum in
the group descriptor (s_uuid[16] | __u32 group | ext3_group_desc
(excluding gd_checksum itself)). This allows the kernel to more safely
manage UNINIT groups.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE (0x0008) - change i_blocks to be
in units of s_blocksize units instead of 512-byte sectors, use
l_i_frag and l_i_fsize as i_blocks_hi (could also be part of 64BIT).
E2fsck and debugfs changed to support i_blocks_hi instead of l_i_frag and
l_i_fsize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check for potential overflow for filesystems contained in regular files
where the filesystem image size is returned by stat64().
Signed-off-by: Eric Sandeen <esandeen@sandeen.net>
Create new ext2fs library inline functions in order to calculate
the starting and ending blocks in a block group.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
There were still some %d's lurking when we print blocks & inodes; also
many of the counters in the e2fsck_struct were signed, and probably
need to be unsigned to avoid overflows.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
For loops iterating over all group descriptors, consistently define
first_block and last_block in a way that they are inclusive of the
range, and do not overflow.
Previously on the last block group we did a test of <= first +
dec_blocks; this would actually wrap back to 0 for a total block count
of 2^32-1
Also add handling of last block group which may be smaller.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
For loops such as:
for (i=1; i <= fs->super->s_blocks_count; i++) {
<do_stuff>
}
if i is an int and s_blocks_count is (2^32-1), the condition is never false.
Change these loops to:
for (i=1; i <= fs->super->s_blocks_count && i > 0; i++) {
<do_stuff>
}
to stop the loop when we overflow i
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new function, ext2fs_div_ceil(), which correctly calculates a division
of two unsigned integer where the result is always rounded up the next
largest integer. This is used everywhere where we might have
previously caused an overflow when the number of blocks
or inodes is too close to 2**32-1.
Based on patches from Eric Sandeen, but generalized to use this new function
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
This patch allows "inode_size" to be specified in the mke2fs.conf file,
and always compiles in the "-I" option. In addition, it disallows
specifying the inode size on rev 0 filesystems, though I don't think
this was much of a danger anyways.
Clean up dead lines in ext2fs.h.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When allocating space for the RAID filesystems with the stride parameter,
place each portion of the group's inode table right up after the superblock
(if present) in order to minimize fragmentation of the freespace.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This feature is initially intended for testing purposes; it allows an
ext2/ext3 developer to create very large filesystems using sparse files
where most of the block groups are not initialized and so do not require
much disk space. Eventually it could be used as a way of speeding up
mke2fs and e2fsck for large filesystem, but that would be best done by
adding an RO_COMPAT extension to the filesystem to allow the inode table
to be lazily initialized on a per-block basis, instead of being entirely initialized
or entirely unused on a per-blockgroup basis.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This caused FTBFS bugs on AMD64 platforms, since it uses a different
64-bit type when compared with IA64, so we need to make our
autoconfiguration system more intelligent.
Addresses Debian Bugs: #360661, #360317
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the filesystem is opened in exclusive mode, then device will be
busy by definition, so don't return -EBUSY. This caused mke2fs -j to
fail on the 1.39-WIP (29-Mar-2006) release. (Addresses Debian Bug:
#360652)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The x86 assembly instructures for bit test-and-set, test-and-clear,
etc., interpret the bit number as a 32-bit signed number, which is
problematic in order to support filesystems > 8TB.
Added new inline functions (in C) to implement a
ext2fs_fast_set/clear_bit() that does not return the old value of the
bit, and use it for the fast block/bitmap functions.
Added a regression test suite to test the low-level bit operations
functions to make sure they work correctly.
Note that a bitmap can address 2**32 blocks requires 2**29 bytes, or
512 megabytes. E2fsck requires 3 (and possibly 4 block bitmaps),
which means that the block bitmaps can require 2GB all by themselves,
and this doesn't include the 4 or 5 inode bitmaps (which assuming an
8k inode ratio, will take 256 megabytes each). This means that it's
more likely that a filesystem check of a filesystem greater than 2**31
blocks will fail if the e2fsck is dynamically linked (since the shared
libraries can consume a substantial portion of the 3GB address space
available to x86 userspace applications). Even if e2fsck is
statically linked, for a badly damaged filesystem, which may require
additional block and/or inode bitmaps, I am not sure e2fsck will
succeed in all cases.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This flag when specified to ext2fs_open or ext2fs_initialize indicates
that the application wants the io_channel to be opened in exclusive mode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new io_channel open flag, IO_FLAG_EXCLUSIVE,which requests that
the device be opened in exclusive (O_EXCL) mode. Add support to the unix_io
implementation for this flag.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a dependency to make sure that the subdirectories are created before
creating all of the object files.
Addresses Sourceforge Bug: #1261553
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We no longer have the sparc assembly code in the header file any more, so we
shouldn't set _EXT2_HAVE_AS_BITOPS_. This would break compiles on the sparc
architectures when using gcc.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
#include <string.h> is needed since the inline functions use memcpy().
(Addresses Sourceforge Bug #1251062)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a bug when writing an external journal device on an big
endian machine (such as a S/390), where when the number of
block groups is zero, we never end up writing out the
primary superblock at all.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If fs->now is non-zero, use that as the time instead of the system
time when setting various filesystem fields (last modified time, last
write time, etc.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o