resize_inode capability disabled, but which still have the
s_reserved_gdt_blocks field set in the superblock, or which
still have blocks in the inode #7 (the resize inode).
problem.c (PR_1_BB_FS_BLOCK, PR_1_BBINODE_BAD_METABLOCK_PROMPT):
Fix up the handling of corrupted indirect blocks in the
bad block. We now correctly handle the case where there
is an overlap between a block group descriptor or
a superblock and a bad block indirect block. In the case
where the indirect block is corrupted, we now suggest
"e2fsck -c".
superblock. E2fsck will automatically save the journal information
in the superblock if it is not there already, and will use it if the
journal inode appears to be corrupted. ext2fs_add_journal_inode()
will also save the backup information, so that new filesystems
created by mke2fs and filesystems that have journals added via
tune2fs will also have journal location written to the superblock as
well. Debugfs's logdump command has been enhanced so that it can
use the journal information in the superblock.
The debugfs man page has been improved to more fully describe the
logdump command.
Added two new functions, ext2fs_file_open2() and
ext2fs_inode_io_intern2() which take a pointer to an inode structure;
this is needed so that e2fsck and debugfs can synthesize a
fake journal inode and use it to access the journal.
a single directory block (because this is the easy case;
we don't currently check for duplicates that span
directory blocks, for now. Eventually for htree
directories we can do this by searching for all directory
blocks that have a hash overflow, and then searching the
adjacent blocks to find all other potential duplicates.)
Add additional checks to HTREE directories. We now check the count
and limit fields in the htree header, as well as assuring that the
hash table in each interior node is in ascending order. We also
check to make sure all leaf nodes are have the expected depth in
the tree.
Updated test cases to deal with all of the above.
using a non-zero hash version (i.e., half MD4 or TEA hash).
The hash version wasn't getting copied into dx_dir->hashversion and
this caused the kernel to treat all directories if they were using the
legacy hash, which was Bad.
would cause i_size to be too big), and offer to truncate the inode.
Remove old bogus i_size checks.
Add test case which tests e2fsck's handling of large sparse files.
Older e2fsck with the old(er) bogus i_size checks didn't handle
this correctly.
V2 fields are set on a V1 journal superblock, or an
internal V2 journal has s_nr_users is non-zero, clear the
entire journal superblock beyond the V1 superblock. This
fixes botched V1->V2 updates.
problem.c, problem.h (PR_0_CLEAR_V2_JOURNAL): Add new problem code.
f_bad_local_jnl: New test which tests for a V2 journal with bad
fields caused by a botched V1->V2 upgrade.
which will automatically relocate the ext3 journal from a
visible file to an invisible journal file if the
filesystem has been opened read/write.
super.c (check_super_block): Add call to e2fsck_move_ext3_journal
problem.c, problem.h (PR_0_MOVE_JOURNAL, PR_0_ERR_MOVE_JOURNAL):
Add new problem codes.
Andreas's symlink code; check_blocks() was unconditionally testing
inode_bad_map without checking to see if it existed first. Fixed
problem a different way; we now no longer check inode_bad_map at all,
since the file might not get deleted in pass 2 anyway. We move the
large file feature reconciliation code to to e2fsck_pass2(), and in
deallocate_inode() in pass2.c, we decrement the large files counter if
we're about to delete a large file.
pass1.c (mark_inode_bad): Replace alloc_bad_map with a function which
sets the bit in the bad inode bitmap.
(e2fsck_pass1): Check for fast symlinks with an invalid size, and set
the bad inode map in that case.
pass2.c (e2fsck_process_bad_inode): Check for fast symlinks with an
invalid size and prompt the user if the inode should be cleared.
problem.h, problem.c (PR_2_SYMLINK_SIZE): Added new problem code.
problem.c, problem.h: Change PR_0_JOURNAL_UNSUPP_INCOMPAT and
PR_0_JOURNAL_UNSUPP_ROCOMPAT so they aren't fatal errors, but prompt
to see if the user should abort. Removed the
PR_0_JOURNAL_RESET_COMPAT problem code.
journal.c (e2fsck_journal_load): If there are incompatible journal
flags, just return an error code.
(e2fsck_check_ext3_journal): If e2fsck_journal_load returns an error
code indicating that there are incompatible journal flag, check to see
if we should abort, and then offer to clear the journal.
journal.c (e2fsck_journal_reset_super): Fix bug; the reset journal
wasn't getting written out to disk since the dirty bit wasn't being
set on the buffer.
(e2fsck_journal_load): Don't print an error message if the journal
version number is wrong; just return a error code reflecting this
fact. If the block type in the journal superblcok is obviously not a
version number, report the journal is corrupted.
(e2fsck_check_ext3_journal): On an unsupported journal version, prompt
to abort by default, but then offer a chance to clear the journal as
corrupt.
problem.c, problem.h (PR_0_JOURNAL_UNSUPP_VERSION): Added new problem code.
pass1.c: Treat inodes with a low dtime (that were from a corrupted
orphan list) specially.
problem.c, problem.h: Add new problem codes PR_1_LOW_DTIME and
PR_1_ORPHAN_LIST_REFUGEES, and a new latch group, PR_LATCH_LOW_DTIME.
problemP.h: Expand the size of the problem flag to be an int instead
of a short. Expand space in the flag word which is reserved for
problem latch flags from 3 bits to 8 bits.
ChangeLog, expect.1, expect.2, image.gz, name:
f_badorphan: New test which verifies corrupted orphan list handling.
super.c (check_super_block): Be more strict on checking
s_r_blocks_count superblock field.
problem.c, problem.h (PR_0_JOURNAL_UNSUPP_ROCOMPAT,
PR_0_JOURNAL_UNSUPP_INCOMPAT, PR_0_JOURNAL_RESET_COMPAT): New problem
codes.
journal.c (e2fsck_journal_load): Use a problem code to report
unsupported feature flags. There is code to clear unsupported flags,
but since this is dangerous, it's not allowed in the problem code
table.
journal.c (e2fsck_journal_reset_super): initialize the journal
sequence number to a random value to avoid recovering bad transactions
from a corrupt journal.
pass1.c (e2fsck_pass1): Cap the maximum legal size of a file by the
limit caused by the fact that i_blocks is in 512 byte units, and that
the Linux buffer cache also fundamentally assumes 512 byte sectors.
Make sure that the journal inode is a regular file, and when clearing
an unused journal inode, make sure the icount db is updated.
problem.c, problem.h (PR_1_JOURNAL_BAD_MODE): Add new problem code.
ChangeLog, journal.c:
journal.c (e2fsck_journal_fix_unsupported_super): Remove unused
function. Add FIXME notes to e2fsck_get_journal(), from Andreas
Dilger.
pass1.c (e2fsck_pass1): Moved journal inode handling out to its own
block; if the journal inode is not in use, and it contains data, offer
to clear it.
problem.h, problem.c (PR1_JOURNAL_INODE_NOT_CLEAR): Add new problem
code.
problem.c: Modified problem table to use a new abbreviations.
problem.h: Fixed numbering of pass1 error messages; an extra 0 had
slipped into some of the numbers. (Pointed out by Andreas Dilger)
journal.c (e2fsck_journal_fix_corrupt_super): Clean up unnecessary
automatic variable. Add explanatory comment about the kernel
emulation routines. (Suggested by Andreas Dilger)
pass1b.c: Change routines to use PR_1B_BLOCK_ITERATE when reporting
problems rather than using com_err directly.
problem.c, problem.h (PR_1B_BLOCK_ITERATE): Add new problem code.
message.c (expand_percent_expression): Add safety check. If ctx->str
is NULL, print "NULL" instead of dereferencing the null pointer.
pass1b.c, pass2.c, pass3.c: Change calls to ext2fs_block_iterate to
ext2fs_block_iterate2, to support 64-bit filesizes and to speed things
up slightly by avoiding the use of the ext2fs_block_iterate's
compatibility shim layer.
version.h:
Update for WIP release.
super.c (release_inode_block, release_inode_blocks,
release_orphan_inodes): Add code to deal with truncating inodes which
are still in use (but which are on the orphan list because they need
truncation).
problem.c, problem.h: Rename PR_0_CLEAR_ORPHAN_INODE to
PR_0_ORPHAN_CLEAR_INODE, and remove PR_0_ORPHAN_INODE_INUSE.
journal.c (e2fsck_run_ext3_journal): Add i18n support, and print a
message when the journal is being recovered.
journal.c (e2fsck_journal_load): Fix **nasty** bug which caused
e2fsck_check_ext3_journal to smash the journal because
journal->j_transaction_sequence wasn't getting initialized.
journal.c: (recover_ext3_journal, e2fsck_run_ext3_journal): Move call
to e2fsck_clear_recover from recover_ext3_journal to after the
filesystem has been closed and reopened. Otherwise, the superblock in
the filesystem handle will probably be stale, and will overwrite the
newer version of the superblock written by the log recovery.
message.c (expand_inode_expression): Add support for %Iu and %Ig
problem.h (PR_0_CLEAR_ORPHAN_INODE): Add new problem code.
super.c (release_orphan_inodes, release_inode_block,
release_inode_blocks): Update the block group descriptor counts when
freeing the orphan inode. Use PR_0_CLEAR_ORPHAN_INODE to report when
we clear an orphan.
journal.c (e2fsck_run_ext3_journal): Fix a bug where we attempted to
reopen the filesystem using the device name instead of the filesystem
name.
Makefile.in: Update the make dependencies
problem.c, problem.h: Add the problem codes:
PR_0_ORPHAN_ILLEGAL_BLOCK_NUM, PR_0_ORPHAN_ALREADY_CLEARED_BLOCK,
PR_0_ORPHAN_ILLEGAL_HEAD_INODE, PR_0_ORPHAN_ILLEGAL_INODE,
PR_0_ORPHAN_INODE_INUSE
super.c (release_inode_blocks, release_orphan_inodes,
check_super_block): Add support for clearing orphaned inodes from the
unmounted filesystem.
journal.c (e2fsck_recover_ext3_journal): Remove the last orphan check;
this is now handled in check_super_block --- non-journaled filesystems
can use the orphan list in the future. Also, move the the re-opening
of the filesystem to e2fsck_run_ext3_journal().
debugfs.c:
debugfs.c (finish_range): Make sure the pager FILE pointer to use.
configure, configure.in, ChangeLog:
configure.in (JFS_DEBUG): Add support for --enable-jfs-debug
journal.c: implement loading of ext3 journal for recovery code
problem.c (fix_problem): return answer from PR_AFTER_CODE to caller.
Add journal problems.
recovery.c (journal_recover): user-space ext3 journal recovery code
unix.c (main) : check journal and do recovery in separate steps
jfs.h, recovery.c: Files ext3 kernel code.
jfs_compat.h: Compatibility header file to allow kernel code to be
linked to e2fsck.
pass5.c (check_block_bitmaps, check_inode_bitmaps): Add error checking
for a "should never happen case".
problem.c, problem.h (PR_5_COPY_IBITMAP_ERROR,
PR_5_COPY_BBITMAP_ERROR): Add new error codes.
pass1.c (pass1, check_size): Apply patch from Chris Wedgewood
(cw@foof.org) which checks to see if special devices have a non-zero
size, and deals with it.
problem.c, problem.h (PR1_SET_NONZSIZE): Add new problem code.
problem.c, problem.h (PR_0_HURD_CLEAR_FILETYPE): Add new problem code.
super.c (check_super_block): If the OS type in the superblock is the
Hurd, check to see if the filetype feature is set, and offer to clear
it if so. This needs to be done since the Hurd doesn't properly
support the filetype feature. (And since the hurd allows the
transmogrification of files to special files and vice versa --- for no
good reason that I can understand --- it can't support the filetype
feature for the forseeable future, either.)
ChangeLog, mke2fs.c:
mke2fs.c (main): We forcibly turn off the filetype feature if the OS
is the hurd, since the hurd doesn't support it. (And since the hurd
allows the transmogrification of files to special files and vice versa
--- for no good reason that I can understand --- it can't support the
filetype feature for the forseeable future, either.)
mke2fs.c (proceed_question): Fix reversed sense of proceed_question
that was busted due to the internationalization patch. Fixed bug
where if proceed_question was called twice, the input buffer wasn't
cleared of the previous question's newline.
ChangeLog, expect.1, expect.2, image.gz, name:
f_hurd: Add test for Hurd-specific features (right now, just checks to
make sure the filetype feature is cleared)
ChangeLog, ls.c:
ls.c (list_super): Change the string displayed for the Hurd to be
GNU/Hurd, instead of just "GNU".
unix.c (main): If compression is enabled on the filesystem, print a
warning message (for now).
message.c: Add new compression shortcut: @c == compress
problem.c, problem.h (PR_1_COMPR_SET): Add new error code.
pass1.c (check_blocks): If the inode has EXT2_COMPRBLK_FL flag set,
check to see if the filesystem supports compression. If it does pass
this information down to process_block() so it can treat the
compressed block flag words correctly. If not, offer to clear the
flag, since it shouldn't be set.
(process_block): If an inode has the compressed inode flag set, allow
EXT2FS_COMPRESSED_BLKADDR.
pass1b.c (process_pass1b_block, delete_file_block, clone_file_block):
pass2.c (deallocate_inode_block): Use HOLE_BLKADDR to check to see if
the block can be skipped.
ChangeLog, Makefile.in:
Makefile.in: Exclude the internationalization files from being
distributed.
ChangeLog, configure, configure.in:
configure.in: Add support for --enable-compression. This is
experimental code only for now, which is why it's under --enable test.
Once it's stable, it will always be compiled in.
TODO:
Commit additional TODO items.
pass1.c (e2fsck_pass1): If the filesystem does not support imagic
inodes, if an inode has the imagic flag set, offer to clear the imagic
flag. If a valid device/fifo/socket has the immutable flag set, call
the new helper function check_immutable() to offerto clear the
immutable flag.
pass2.c (check_filetype): Use the new ext2_file_type() helper function
instead of calculating the file_type information manually.
pass3.c (e2fsck_reconnect_file): When adding a link to lost+found,
calculate the filetype information so that ext2fs_link() can use the
information if applicable. (get_lost_and_found): Create the
/lost+found directory with the correct filetype information if
applicable.
util.c (ext2_file_type), e2fsck.h: New function which returns the
directory entry file type information given the inode's mode bits.
problem.c, problem.h: Added new problem codes PR_1_SET_IMAGIC and
PR_1_SET_IMMUTABLE.
ChangeLog, mke2fs.8.in:
mke2fs.8.in: Update manual page so that the sparse_option filesystem
option is properly named.
pass4.c (e2fsck_pass4): Clear inode_imagic_map after freeing it, to
prevent it from getting freed twice.
unix.c (main): Close the filesystem before freeing the context, so
that in the event of a free()-related segmentation violation, the
filesystem is properly closed and written out.
e2fsck.c (e2fsck_reset_context): When freeing ctx->inode_reg_map, we
weren't zero'ing ctx->inode_reg_map, which could cause a segfault
later on in the e2fsck run.
problem.h (PR_2_SPLIT_DOT): Fix excess zero in problem code (now
matches the standard convention).
problem.c, problem.h (PR_2_NULL_NAME): Add new problem code.
pass2.c (check_dir_block): Require that the length of the directory
entry be at least 12 bytes. Check to see if the filename is
zero-length, and flag that as an error.
pass2.c (check_filetype): If the filetype filesystem feature is not
set, and a directory entry has a dirent feature, offer to clear it
(since 2.0 kernels will do complain will interpret it as a very large
name length field).
pass4.c (e2fsck_pass4): If an inode is set in the inode_imagic_map
bitmap, don't check to see if it is disconnected from the inode tree
(because it almost certainly will be). Free inode_imagic_map at the
end of pass 4.
pass2.c (check_dir_block, check_filetype): If the FILETYPE feature is
set, check the directory entry's filetype information field, and
fix/set it if necessary. (e2fsck_pass2): Free the inode_reg_map
bitmap at the end of pass 2.
pass1.c (e2fsck_pass1, alloc_imagic_map): Allocate and fill in
information for inode_reg_map and inode_imagic_map, which indicates
which inodes are regular files and AFS inodes, respectively.
Since only the master superblock is written during a restart, force
that superblock to be used after a restart; otherwise changes to the
block group descriptors end up getting ignored.
problem.c, problemP.h: If e2fsck is run -n, make def_yn variable be 0
for "no". Add support for a new flag, PR_NO_NOMSG, which supresses
the problem message if e2fsck is run with the -n option.
problem.c, problem.h (PR_2_SET_FILETYPE, PR_2_BAD_FILETYPE): Add new
problem codes.
message.c (expand_dirent_expression): Add support for %dt which prints
the dirent type information.
e2fsck.c (e2fsck_reset_context): Free new bitmaps (inode_reg_map and
inode_imagic_map).
e2fsck.h (e2fsck_t): Add new inode_reg_map and inode_magic_map to the
context structure.
ChangeLog, nt_io.c:
nt_io.c: New file which supports I/O under Windows NT.
ChangeLog, gen_uuid_nt.c:
gen_uuid_nt.c: New file which creates a UUID under Windows NT.
Many files:
Add support for non-Unix compiles
Theodore Ts'o