Disordered inode tables may appear when inode_blocks_per_group is lesser
or equal to the number of groups in a flex group.
This bug can be reproduced with:
mkfs.ext4 -t ext4dev -G512 70G
In that case, you can see with dump2fs that inode tables for groups 510
and 511 are placed just after group 51's inode table instead of being
placed after group 509's inode table.
Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It looks like the right place to check for ino=0 in
ext2fs_read_inode_full() is before creating the inode cache, otherwise
since we set icache[i].ino = 0 in create_icache(), it will match the
loop below and thus we return a wrong value.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_group_desc_csum_verify() is always checking the bg_checksum (to
make sure it is zero) even when the GDT_CSUM feature is not present.
This is normally OK, but apparently there are filesystems in the wild
where this field has not be initialized to zero.
Addresses-Debian-Bug: #490637
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Solaris's header files are very picky about which C compiler can be
used for SUSv3 conformance. Use of C99 is not compatible with SUSv2
(_XOPEN_SOURCE=500), and C89 is not compatible with SUSv3
(_XOPEN_SOURCE=600). Since we need some SUSv3 functions, consistently
use SUSv3 so that e2fsprogs will build on Solaris using c99.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we fail doing ext2fs_allocate_block_bitmap() or
ext2fs_allocate_inode_bitmap() we directly goto cleanup and don't free
the memory allocated to buf.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck could to do more damage to a filesystem by trying to relocate
inode tables due to corrupted block group descriptors, and the
relocation could seriously damage the filesystem.
This patch enhances ext2fs_check_desk() so it detects more
self-inconsistent block group descriptors, including the cases where
e2sck might be tempted to relocate the inode table, and reports the
block group descriptors as invalid; this will cause e2fsck to attempt
to use the backup superblocks, which hopefully have not been trashed.
Addresses-Sourceforge-Bug: #1840291
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also change mke2fs.conf to enable huge_file,dir_nlink,extra_isize, and
uninit_bg by default for ext4 filesystems, and enable extra_isize in
the library as well.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The offset for both inode bitmaps and inode tables is overshot by one
block causing a hole between the group of bitmaps and inode tables
when initializing a filesystem using mke2fs.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
extent.c should only try to include ss/ssh.h when it is compiled with
-DDEBUG. Otherwise it's not necessary and it breaks the Debian MIPS
build (and the Debian MIPS build only) because it tries to build
libext2fs without building libss as part of a MIPS-specific build
rule.
Addresses-Debian-Bug: #487675
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This could cause certain mke2fs feature combinations to result in the
initial blocks of the inode table getting wiped out when the journal
is created.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The public header files depend on the the autoconf defines
WORDS_BIGENDIAN and HAVE_SYS_TYPES_H, so we add them to ext2_types.h
so that external programs which try to use ext2fs_swap*() will work
correctly on big-endian systems. Fortunately, few if any programs
need to use this libext2's byte-swap functions directly.
Addresses-Debian-Bug: #484879
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add callback functions for ext2fs_alloc_block() and
ext2fs_block_alloc_stats(). This is needed so e2fsck can be informed
when the extent_set_bmap() function needs to allocate or deallocate
blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit enables read/write access via the block iterator for
extent-based inodes.
Also fixed some bugs regarding the handling on non-leaf extent nodes
when iterating over extents in a file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_extent_delete() will also update the parent node and decrement
the inode block count.
Passing in the EXT2_EXTENT_DELETE_KEEP_EMPTY flag will allow the empty
node to remain.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allows unmapping or remapping single mapped logical blocks,
and mapping currently unmapped blocks.
Also implements ext2fs_extent_fix_parents() to fix parent
index logical starts, if the first index of a node changes
its logical start block.
Currently this can result in unnecessary new single-block extents; I
think perhaps ext2fs_extent_insert should grow a flag to request
merging with a nearby extent?
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext2fs_extent_insert finds that the requested node
for insertion is full, it will currently fail.
With this patch it will split as necessary to make room, unless an
EXT2_EXTENT_INSERT_NOSPLIT flag is passed to it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When called for a given handle, the new function extent_node_split()
will split the current node such that half of the node's entries will
be moved to a new tree block. The parent will then be updated to
point to the (now smaller) original node as well as the new node.
If the root node is requested to be split, it will move all
entries out to a new node, and leave a single entry in the
root pointing to that new node.
If the reqested split node's parent is full it will recursively
split up to the root to make room for the new node's insertion.
If you ask to split a non-root node with only one entry,
it will refuse (we'd have an empty node otherwise).
It also updates the i_blocks count when a new block has
successfully been connected to the tree.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the inode's i_block[] array is completely empty, create an empty
extent tree in the in-core inode and set the EXT4_EXTENT_FL inode
flag. This makes it easy to create a new inode using extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The logic for stopping at the right level in extent_goto was wrong,
so if you asked it to go to any level other than 0 (the leaf
level) it would fail.
Also add this argument to the tst_extents goto command to test it.
(I thought this was a failure in my split code but it was this
helper that was causing problems...)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a new function ext2fs_zero_blocks(), and use it so that journal
data blocks is written in larger chunks to speed up the creation of
the journal.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This I/O manager saves the contents of the location being overwritten
to a tdb database. This helps in undoing the changes done to the
file system.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the way we allocate bitmaps and inode tables if the FLEX_BG
feature is used at mke2fs time. It places calculates a new offset for
bitmaps and inode table base on the number of groups that the user
wishes to pack together using the new "-G" option. Creating a
filesystem with 64 block groups in a flex group can be done by:
mke2fs -j -I 256 -O flex_bg -G 32 /dev/sdX
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, the portion of the inode table for block group 0 was
always completely zero'ed out, so the ext2fs_open_inode_scan() didn't
handle a non-zero bg_itable_used value for the first block group. Fix
this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes some bugs which I introduced recently while revamping the
uninit_bg code. Since mke2fs is no longer calling
ext2fs_set_gdt_csum(), it's important that ext2fs_initialize()
correctly initialize bg_itable_unused for all block group descriptors.
In addition, mke2fs needs to zero out the the reserved inodes based on
the values of bg_itable_unused set by ext2fs_initialize().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mke2fs used to have special case, ugly code in
setup_lazy_bg/setup_uninit_bg flag which set the flags based on all
sorts of special cases. Change it so that it is done in libext2fs,
and fix mke2fs to use alloc_stats functions which will take care of
clearing the *_UNINIT flags automatically as needed.
This is preparatory work to make the flex_bg allocation patch much
cleaner.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This simplifies the code, and using the uninit_bg with the inode table
lazily initialized is just as good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add an explanation of exactly what ext2fs_super_and_bgd_loc() and
ext2fs_reserve_super_and_bgd_loc() do, and more importantly, exactly
what they return. Note that most callers should *not* rely on the
return value since it's rarely useful, especially once the flex_bg
feature is enabled and inode table and allocation bitmap blocks may
not be in the block group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function tried to set BLOCK_UNINIT based on the return value of
ext2fs_super_and_bgd_loc. That's not something that works once we
start allowing flex_bg since the block group metadata might not be
located in the blockgroup itself.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It used to be the case that ext2fs_set_gdt_csum set the ITABLE_ZEROED
flag if the INODE_UNINIT is not set. This assumed that the only
caller of ext2fs_set_gdt_csum was e2fsck (which was not true), and
that e2fsck would take care of zeroing the inode table (whic was also
not true).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Set the s_min_extra_isize and s_wanted_extra_isize superblock fields
to reasonable defaults in ext2fs_initialize().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make sure that extent_goto() leaves us at the last extent
prior to the requested logical block, if the logical block
requested lands in a hole.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_extent_insert() only did a memmove if path->left
was > 0, but if we are at the last extent in the node,
path->left == 0, and this node must be moved before the
current extent is replaced with the newly inserted node.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
$(LIBSS) should automatically include @DLOPEN_LIB@ so the right thing
happens for programs that need to use the ss library.
Reorder the library link order for tst_extents since the blkid library
uses libuuid functions.
Thanks to Eric Sandeen for pointing this problem out!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fedora seems to be gearing up to add
-Werror-implicit-function-declaration
to the standard build flags, so I thought I'd get out ahead
of this one...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Thanks to Max Lindner (lokimuh) for pointing this out.
I'm playing around a bit with ext2 and multi-user encryption and I
need space for my key management. So I set s_first_data_block to 4000
or something like that.
This way mke2fs segfaults when executing
ext2fs_create_resize_inode() because
blk_t goal = 3 + sb->s_reserved_gdt_blocks + fs->desc_blocks +
fs->inode_blocks_per_group;
will produce a integer underrun later and segfault then in the
ext2fs_test_bit assembler inline function.
when exchanging 3 with 2 + sb->s_first_data_block, mke2fs does not
segfault.
I'm not 100% sure if thats the correct way dealing with this issue
but I think its a proper solution.
Addresses-Sourceforge-Bug: #1935847
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the function signature so that ext2fs_set_gdt_csum() returns an
error code.
If the inode bitmap hasn't been loaded return EXT2_ET_NO_INODE_BITMAP.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Never set the UNINIT_BLOCKS flag for the last group since the kernel
doesn't handle the case graefully if there is a full set of blocks in
each blockgroup marked UNINIT_BLOCKS. The kernel should be fixed up,
but in the meantime this avoids hitting the problem, and is more
consistent with lazy_bg not marking the last group UNINIT.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Only mark the superblock as dirty if the function actually managed to
change part of the block group descriptor.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_swap_inode_full() was incorrectly swapping the i_block array
for extents.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_extent_get() function was not OR-ing together UNINIT
and LEAF flags in the case where an extent was both; so if we
had an extent which was both uniint and leaf, pass1 would bail
out where depth == max_depth but was not marked as leaf, and
e2fsck (from the next branch) would abort with:
e2fsck 1.40.8 (13-Mar-2008)
Pass 1: Checking inodes, blocks, and sizes
Error1: No 'down' extent
Aborted
Also, if the error is encountered again, print the inode number
to aid debugging until it's properly handled, at least.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- Add support for computing CRC-16 value.
- Add call to check/verify/set csum on block_groups.
- Add a test program to verify csum operations.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch includes the changes required to e2fsck to understand the
nlink count changes made in the kernel.
In e2fsck pass 4, when we fetch the actual link count, if it is
exceeds 65,000 we set the link count to 1. We silently fix the
situation where the nlink count of the directory is 1, and there are
fewer than 65,000 subdirectories, since since that can happen
naturally.
Patch originally from CFS, significantly rewritten by Theodore Ts'o.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In order to more accurately count the number of directories, which
with the DIR_NLINKS feature can now be greater than 65,000, change
icount to use a 32-bit counter. This doesn't cost us anything extra
when the icount data structures are stored in memory, since due to
padding for alignment reasons.
If the actual count is greater than 65,500, we return 65,500. This is
because e2fsck doesn't actually need to know the exact count; it only
needs to know if the number of subdirectories is greater than 65,000.
In the future if someone really needs to know the exact number, we
could add a 32-bit interface. One isn't needed now, though.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
No application will ever use the ORPHAN_FS flag, since it only shows
up in kernel memory, but it's been pointed out it was first used in
ext3, and so it should be renamed for accuracy.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After the fix for resize2fs's inode mover losing in-inode
extended attributes, the regression test I wrote caught
that the attrs were still getting lost on powerpc.
Looks like the problem is that ext2fs_swap_inode_full()
isn't paying attention to whether or not the EA magic is
in hostorder, so it's not recognized (and not swapped)
on BE machines. Patch below seems to fix it.
Yay for regression tests. ;)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_extent_insert() was copying n-1 of the existing extents when
moving things down to make room for the new extent.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When deleting the last entry in a node, back up the current pointer so
it is always pointing at a valid entry.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add 64-bit block capable routines to inode IO manager. Since fileio.c
does not yet have 64bit support, these routines will not handle 64bit
block numbers correctly yet.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In order to provide 64-bit block support for IO managers an maintain
ABI compatibility with the old API, some new functions need to be
added to struct_io_manger. Luckily, strcut_io_manager has some
reserved space that we can use to add these new functions.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add two new functions which allows the caller to examine the last
directory block entry added to the list, and to drop if it necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a flag which returns the partially completed filesystem object so
e2fsck can print more intelligent error messages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a block buffer was not supplied and ext2fs_alloc_block() returned
with no errors, it would leak a temporary block buffer.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is useful for mballoc to align block allocation on the RAID
stripe boundaries.
Signed-off-by: Rupesh Thakare <rupesh@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add vertificaton of the in-inode EA information, and allow in-inode
EA's to have a checksum.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Responsibility for byte swapping the extents information rests with
the low-level extent code, which translates the on-disk extents
information to the abstract extent format. The on-disk format will
eventually get more complicated, in order to add support for 64-bit
block numbers, bit-compressed extents, etc. So to avoid needing to
expose all of that complexity in swapfs.c, the in-memory contents of
i_blocks will not be byte-swapped and will be identical to the on-disk
format.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The major changes were:
* Fix realloc() leak on failure case from Jim Meyering
* Fixed various problems in transaction lock code
* Made transaction_brlock() static
* Added more fine-grained locking features
Moved from svn revision #22080 to #23590
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
DJGPP lacks sys/select.h and sys/un.h; add header checks to be more
portable.
Signed-off-by: Christophe Grenier <grenier@cgsecurity.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This flag allows the caller to promise that it will not try to modify
the block numbers returned by the iterator.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously we used a hard-coded test where for the Alpha and the IA64,
we used lseek instead of llseek(). Generalize this to whenver
sizeof(long) is the same as sizeof(long long).
It turns out this fixes a FTBFS problem on the x86_64 for Debian,
since dietlibc doesn't provide llseek() on that architecture.
Addresses-Debian-Bug: #459614
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The test_fs flag is an "ok to be used with test kernel code" flag. It
makes it easier for us to determine whether a filesystem should be
mounted using ext4 or not.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
inode_uid() and inode_gid() weren't getting defined on systems that
were not Linux, Hurd, or Masix.
Addresses-Sourceforge-Bug: #1859778
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add some additional checks, primarily in resize2fs and in the rarely
used (and soon to-be-deprecated) e2fsck byte-swap filesystem function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that e2fsck tries to backup the primary superblock to the backups
when the feature sets ar different, it's important when tune2fs writes
out a changed superblock, that we filter out the
EXT3_FEATURE_INCOMPAT_RECOVER feature to the backup superblocks, since
it will be removed from the primary superblock either when the
filesystem is mounted uncleanly or when journal is replayed.
Addresses-Debian-Bug: #454926
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This addresses a potential security vulnerability where an untrusted
filesystem can be corrupted in such a way that a program using
libext2fs will allocate a buffer which is far too small. This can
lead to either a crash or potentially a heap-based buffer overflow
crash. No known exploits exist, but main concern is where an
untrusted user who possesses privileged access in a guest Xen
environment could corrupt a filesystem which is then accessed by the
pygrub program, running as root in the dom0 host environment, thus
allowing the untrusted user to gain privileged access in the host OS.
Thanks to the McAfee AVERT Research group for reporting this issue.
Addresses CVE-2007-5497.
Signed-off-by: Rafal Wojtczuk <rafal_wojtczuk@mcafee.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We cannot merge a removed directory entry to just arbitrary previous
directory entry. The previous entry must be in the same block. So
really bad things can happen when are deleting the first directory
entry in a block where the last directory entry in the previous
directory block is not in use. We fix this bug by checking to see if
the current entry is not the first one in the block before trying to
merge it to the previous entry.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On my FC8 install, ismounted.c fails to build because open(O_CREAT) is
used without passing a mode. The following trivial patch fixes it.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add FLEX_BG as a supported feature bit.
Add support to mke2fs to create filesystems with FLEX_BG.
Add support to tune2fs to add (and remove, if it won't break
filesystem consistency) the FLEX_BG feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
lib/e2p/feature.c | 2 ++
lib/ext2fs/ext2fs.h | 6 ++++--
misc/mke2fs.c | 7 ++++++-
3 files changed, 12 insertions(+), 3 deletions(-)
The FLEX_BG feature allows the inode table, block bitmap, and inode
bitmaps to be located anywhere in the filesystem. Update e2fsck and
libext2fs's checking code to recognize this.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
e2fsck/super.c | 14 ++++++++++++--
lib/ext2fs/check_desc.c | 15 +++++++++++++--
2 files changed, 25 insertions(+), 4 deletions(-)
All files under $(OBJS) and $(SRCS) should be in alphabetical order
but this is not always the case. Let fix some some of these before
applying new files to the list of $(SRCS).
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
lib/ext2fs/Makefile.in | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
When fgets() function fails, contents of the buffer is undefined. That
is, fgets() return value needs to be checked, to avoid undefined behavior.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add macros to support variable-length group descriptors for ext4.
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use ext2fs_group_first_block() instead of the open-coded equivalent in
ext2fs_super_and_bgd_loc() and ext2fs_descriptor_block_loc().
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_dblist_dir_iterate() calls ext2fs_dblist_iterate(), which calls
ext2fs_process_dir_block(), which in turn calls the helper function
db_dir_proc() which calls callback function passed into
ext2fs_dblist_dir_iterate(). At each stage the conventions for
signalling requests to abort the iteration or to signal errors
changes, db_dir_proc() was not properly mapping the abort request back
to ext2fs_dblist_iterate().
Currently db_dir_proc() is ignoring errors (i/o errors or directory
block corrupt errors) from ext2fs_process_dir_block(), since the main
user of ext2fs_dblist_dir_iterate() is e2fsck, for which this is the
correct behavior. In the future ext2fs_dblist_dir_iterate() could
take a flag which would cause it to abort if
ext2fs_process_dir_block() returns an error; however, it's not clear
how useful this would be since we don't have a way of signalling the
exact nature of which block had the error, and the caller wouldn't
have a good way of knowing what percentage of the directory block list
had been processed. Ultimately this may not be the best interface for
applications that need that level of error reporting.
Thanks to Vladimir V. Saveliev <vs@clusterfs.com> for pointing out
this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Any attempt to open a filesystem with s_inode_size set to zero causes
a floating point exception. This is true for e2fsck, dumpe2fs,
e2image, etc. Fix ext2fs_open2() so that it returns the error code
EXT2_ET_CORRUPT_SUPERBLOCK instead of crashing.
Thanks to Dean Bender for reporting this bug.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch instruments the libext2fs unix I/O manager and adds bytes
read/written and data rate to e2fsck -tt pass/overall timing output.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new functions ext2fs_{set,get}_{inode,block}_bitmap_range()
which allow programs like e2fsck, dumpe2fs, etc. to get and set chunks
of the bitmap at a time.
Move the representation details of the 32-bit old-style bitmaps into
gen_bitmap.c.
Change calls in dumpe2fs, mke2s, et. al to use the new abstractions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the 32-bit specific bitmap code into gen_bitmap.c, and the
high-level interfaces into bitmaps.c. Eventually we'll move the
new-style bitmap code into gen_bitmap64.c, but first we need to
isolate the code with knowledge of the bitmap internals in one place
first.
In this patch we move allocation, free, copy, clear, set_padding, and
fudge_end function into gen_bitmap.c, and make sure that the bitmaps.c
and bitops.c no longer have any knowledge of the bitmap internals.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This changes ext2fs_fast_{mark,unmark,test}_{inode,block}_bitmap() to
be inline functions which calls ext2fs_{mark,unmark,test}_generic_bitmap().
This is part of the preparation to support the new-style bitmaps.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The test in ext2fs_check_desc() is off by one; if the inode table
goes all the way to the last block of the block group, it will
falsely assert that it has extended past it. The last block
of a range is start + len -1, not start + len.
You can create (valid) filesystems that will cause e2fsck to complain
via one of the following mkfs commands:
mkfs.ext3 -F -b 1024 /dev/sdb1 2046000000
mke2fs -j -F -b 4096 -m 0 -N 5217280 /mnt/test/fsfile2 327680
mkfs.ext2 -F -b 1024 -m 0 -g 256 -N 3744 fsfile 1024
Addresses-Red-Hat-Bugzilla: #214765
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For some odd geometries*, mkfs will try to allocate inode tables off
the end of the block group and fail, rather than warning that too
many inodes have been requested.
This is because when ext2fs_initialize calculates metadata overhead,
it is only adding in group descriptor blocks and the superblock
if the *last* bg contains them - but the first bg also has all of
the various metadata bits taking up space.
We need to calculate the overhead both for the first block group and
the last block groups separately, since the two different tests need
to know what the overheads are for those two cases, which may be
different.
*for example "mke2fs -b 1024 -m 0 -g 256 -N 3745 fsfile 1024"
(Note, the test here is a little funky; the expected output is
actually a mkfs failure - but a proper failure instead of the
allocator catching the problem at the last minute)
Addresses-Red-Hat-Bugzilla: #241767
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to set t->i_file_acl before we test it in
ext2fs_inode_data_blocks()
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that we are moving to x.y.z version number scheme for maintenance
releases, we ned to change ext2fs_parse_version_string and
blkid_parse_version_string to ignore the second period so we don't
have maintenance releases with a substantially bigger verison number
than the initial x.y release.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On big-endian systems, while swapping, ext2fs_swap_inode_full() swaps
only 128+extra_isize bytes and the EAs if they are present. Now if inode
N has EAs, (and this is the inode in the "scratch inode") then inode N+1
also carries seems to have them since the "scratch inode" was never
zeroed.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>