ext2fs_group_last_block2() already properly calculates
the last block in the last group, so there is no need
to special-case this after the call.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the blocks of a filesystem is a multiple of blocks_per_group,
blocks of the ending group is computed wrongly. Use the
new ext2fs_group_blocks_count() helper instead.
Eric Sandeen: Converted to use new blocks per group helper
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Code to count the number of blocks in the last partial
group is cut and pasted around the e2fsprogs codebase
a few times.
Making this a helper function should improve matters.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If '-n' option is specified there should be no changes made to the file
system hence we should not attempt to discard the file system. This
commit adds a check into the e2fsck_discard_blocks() condition so it skip
discard if E2F_OPT_NO flag is set.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we need to grep, list or just search for failed tests when
running 'make check' which is annoying. This commit simply prints out
the list of failed test names at the end of the output.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If e2fsprogs tools (mke2fs, e2fsck) is run on regular file instead of
on block device, we can use punch hole instead of regular discard
command which would not work on regular file anyway. This gives us
several advantages. First of all when e2fsck is run with '-E discard'
parameter it will punch out all ununsed space from the image, hence
trimming down the file system image. And secondly, when creating an
file system on regular file (with '-E discard' which is default), we
can use punch hole to clear the file content, hence we can skip inode
table initialization, because reads from sparse area returns zeros. This
will result in faster file system creation (without the need to specify
lazy_itable_init) and smaller images.
This commit also fixes some tests that would fail due to mke2fs showing
discard progress, hence the output would differ.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In many places we are using #ifdef HAVE_OPEN64 to determine if we can
use open64() but that's ugly. This commit creates two new helpers
ext2fs_open_file() for open() and ext2fs_stat() for stat(). Also we need
new typedef ext2fs_struct_stat for struct stat.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a slicing-by-8 CRC32c implementation for metadata checksumming.
Adapted from Bob Pearson's kernel patch.
Also added a self-test mechanism so we can verify that the crc32c
implementation is working correctly.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block size can be specified manually via the -b option or deduced
automatically. Unfortunately, the check that it is still smaller than
the system page size is only performed right after the command line
options are parsed.
Therefore, if buggy or inappropriately installed/configured hardware
hints that larger block sizes have to be used, mkfs will silently create
a file system which can not be mounted on the system in question.
By moving the check beyond the last assignment to blocksize it is now
ensured, that mkfs will issue a warning even if inappropriate blocksize
was auto-detected.
The new behavior can be easily tested, by exporting the following
variables before running mkfs:
export MKE2FS_DEVICE_SECTSIZE=8192
export MKE2FS_DEVICE_PHYS_SECTSIZE=8192
Signed-off-by: Yury V. Zaytsev <yury@shurup.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The condition ((start+num) & ~0xffffffffULL) in bitmap_range2
and generic_bmap_range funcs in get_bitmap64.c was wrong and
inconsistent with the condition (start+num-1 > bmap->real_end)
in generic_bitmap_range funcs in get_bitmap.c.
I got the following error from tune2fs on a 16TB fs:
Illegal block number passed to ext2fs_unmark_block_bitmap #4294967295
for block bitmap for 16TB.img
tune2fs: Invalid argument while reading bitmaps
Fix to condition to ((start+num-1) & ~0xffffffffULL), because
the bit (start+num) is not going to be changed by the funcs.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The dump program relies on fs->frag_size and the
EXT2_FRAGS_PER_BLOCK() macro. Kind of silly for it to do so, but it's
part of the kludgy way the dump program (which was originally written
for the BSD FFS was ported over to support ext2/3.) Given how it
makes assumptions about the ext2/3/4 file system being similar to the
BSD FFS, it's a bit of a miracle it works for ext4 --- or at least
appears to work...
Addresses-Debian-Bug: #636418
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In flush_l2_cache() we are using ext2fs_llseek() however we do not
properly detect the error code returned from the function, because we
are assigning it into ULL variable, hence we will not see negative
values.
Fix this by changing the type of the variable to ext2_loff_t which is
signed and hence will store negative values.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is needed to support online resizing for > 32-bit file systems
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We are doing ext2fs_flush() twice right now at the end of the mke2fs.
First by directly calling ext2fs_flush() which is intended to write
superblock and fs accounting information. And then it is invoked again
when we are calling ext2fs_close(), only this time, because the fs is
not dirty, we are writing out only superblock.
I think it is bad to call it twice because even when writing only super
block it takes some time on bigger file systems and moreover
ext2fs_close() can fail without any reasonable explanation for the user.
Also ext2fs_flush() is printing out progress and it is confusing for the
users.
Fix all this by removing the ext2fs_flush() and leaving it all to
ext2fs_close(). However we need to introduce new variables to store
check interval and max mount count, because fs structure is freed on
ext2fs_close() and we really want to print those information as the last
info for the user.
[ Fixed type mismatch in a printf format statement -tytso]
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since e2image can be optionally compiled out, we tested to see if
e2image was built; but using "test -x $E2IMAGE" fails if e2image is
something like "valgrind --simhints=lax-ioctls ../misc/e2image".
Define and use $E2IMAGE_EXE, much like we have done with e2undo and
resize2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for setting the quota feature in superblock
and allows selectively creating quota inodes (user or group or both)
in the superblock. Currently, modifying the quota feature is only
supported when the filesystem is unmounted.
Also, when setting the quota feature, tune2fs will use aquota.user or
aquota.group file inode number in superblock if these files exist.
Otherwise it will initialize empty quota inodes #3 and #4 and use them.
Here is how it works:
# Set quota feature and initialize both (user and group) quota inodes
$ tune2fs -O quota /dev/ram1
# Enable only one type of quota
$ tune2fs -Q usrquota /dev/ram1
# Enable grpquota, disable usrquota
$ tune2fs -Q ^usrquota,grpquota /dev/ram1
# Clear quota feature and remove quota inodes
$ tune2fs -O ^quota /dev/ram1
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mke2fs also creates quota inodes (userquota: inode# 3 and
groupquota: inode #4) inodes while creating a filesystem when 'quota'
feature is set.
# To set quota feature and initialize quota inodes during mke2fs:
$mke2fs -t ext4 -O quota /dev/ram1
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds the quota library (ported form Jan Kara's quota-tools) in
e2fsprogs in order to make quotas as a first class supported feature in Ext4.
This patch also provides interface in lib/quota/mkquota.h that will be used by
mke2fs, tune2fs, e2fsck, etc. to initialize and update quota files.
This first version of the quota library does not support reading existing quota
files. This support will be added in the near future.
Thanks to Jan Kara for his work on quota-tools. Most of the files in this patch
are taken as-is from quota tools and were simply modified to work with
libext2fs in e2fsprogs.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the interpolation because there is a bug in icount which can
cause a core dump if calculated range gets turned into a NaN and then
do an out-of-bounds array access. We could fix this with some more
tests, but the complexity is such that nuking all of the interpolation
code will be faster than fixing the interpolation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The f_lotsbad regression test was failing on some systems
with:
Restarting e2fsck from the beginning...
Pass 1: Checking inodes, blocks, and sizes
+Illegal block number passed to ext2fs_test_block_bitmap #0 for in-use block map
Pass 2: Checking directory structure
Entry 'termcap' in / (2) has deleted/unused inode 12. Clear? yes
Running with valgrind (./test_script --valgrind f_lotsbad) we
see:
+==31409== Conditional jump or move depends on uninitialised value(s)
+==31409== at 0x42927A: ext2fs_test_generic_bmap (gen_bitmap64.c:378)
among others.
Looking at gen_bitmap64.c:
376: arg >>= bitmap->cluster_bits;
377:
378: if ((arg < bitmap->start) || (arg > bitmap->end)) {
A little more debugging showed that it was actually
bitmap->cluster_bits which was uninitialized, because it never
gets copied over in ext2fs_copy_generic_bmap()
Patch below resolves the issue.
Reported-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For consistency with other multi-word options, document the extended
option stripe_width instead of stripe-width. This also avoids the
complexity of parsing options that have an embedded '-'.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently the bigalloc implementation in the kernel requires extents,
but this restriction might get relaxed in the future. Also, old
versions of mke2fs that supported bigalloc during early testing
created the root and lost+found directories without using
extent-mapped inodes. This makes it possible for e2fsck to better
support these old legacy file systems if it comes across them.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the callback interator modifies a block in the middle of an extent
during a call to the block iterator, causing the extent to be split,
ext2_block_iterate3() will end up calling the callback function twice
for some number of blocks. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The blocks command prints out the blocks used by a particular inode,
in a format which is useful for test suite automation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The /tmp directory is often a memory based file system, and using this
can speed up running the regression test suite.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change ext2fs_block_alloc_stats2() so that when a cluster is
allocated, the free blocks counter in the superblock is appropriately
decremented by the cluster size.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 25567a7b0f accidentally removed the initialization for flexbg
and flexbg_size, which affected ext2fs_allocate_group_table() and
ext2fs_allocate_tables(). Replace them.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Eric Sandeen