Mke2fs previously would give an error if the user tried setting the
stride and stripe-width parameters to zero; but this is necessary to
override the stride and stripe-width settings which get automatically
set from the block device's geometry information in sysfs. So allow
setting these parameters to zero.
Addresses-Google-Bug: #4988555
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The extended options parsing for mount_opts was horribly buggy.
Invalid mount options that had an argument would get interpreted as an
extended mount options. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tune2fs previously would give an error if the user tried setting the
stride and stripe-width parameters to zero; but this is necessary to
disable the stride and stripe-width settings. So allow setting these
superblock fields to zero.
Addresses-Google-Bug: #4988557
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Disable the compression flag, and enable symlinks for the install
(this is the same as previous debian packages; debian recommends
against using hard links across different directories)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
lib/ext2fs/Makefile.in had a buggy entry for blkmap64_ba.c in $(SRCS),
which caused this source file to not have a valid Makefile dependency
entry, so blkmap64_ba.o would not get rebuilt when it needed to be.
Also updated the Makefile dependency for the misc directory while
we're at it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Treat the s_blocks_count field in the superblock as a free block count
(instead of the number of free clusters) for bigalloc file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 2a77a784a3 (firest released in e2fsprogs 1.33) compared
superblock summary free blocks and inode counts with the allocation
bitmap counts before starting the file system check proper, and if
they differed, set the superblock and marked it as dirty. If no other
file systme changes were required, this would cause a "*** FILE SYSTEM
WAS MODIFIED ***" message without any explanation of what e2fsck had
changed.
We fix this by only setting the superblock summary free block/inodes
counts if we are skipping a full check, and in non-preen mode, e2fsck
will now print an explicit message stating how the superblock had been
updated.
In a full check, any updates to the superblock free blocks/inodes
fields will be noted in pass5.
This change requires changing a few test results (essentially
reversing the changes made in commit 2a77a784a3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If "make check" is run on a clean repository, it fails due to missing
dependencies for building the test programs. Have "make check" build
all dependencies before starting the tests to ensure that it can finish
without error.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The code which simulated handling uninitialized block bitmaps didn't
take bigalloc file systems into account correctly. Fix it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit b0ecb787ef introduced a bug in check_block_uninit(), which is
used by ext2fs_new_block2(). This bug resulted in the block bitmap
for the block group in question not having space reserved for the file
system metadata blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ignore files generated by "make" or "make check" in "git status".
Ignore backup files from editing files and generated tags files.
Delete a temporary file in tests/d_loaddump/script at test cleanup.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext2fs_add_dir_block() the dblist allocation size was changed to
grow as the number of items in the dblist increases. However, the
error handling in case of allocation failure wasn't changed to match.
Fix the error case to revert to the old allocation size on failure.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
All of the regression tests in e2fsprogs still use a block-mapped
journal (if any journal at all). Add a simple regression test that
tests extent-mapped journals for both mke2fs and e2fsck.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add test for internal journal over 4GB in size, using the
lazy_journal_init and lazy_itable_init features. Otherwise
the filesystem metadata would be too large to reliably run on
test systems, and take too long to create/check the filesystem.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the ability to skip zeroing journal blocks on disk. This can
significantly speed up mke2fs with large journals. At worst the
uninitialized journal is only a very short-term risk (if at all),
because the journal will be overwritten on any new filesystem as
soon as any significant amount of data is written to disk, and
the new journal TID would need to match the offset/TID of an old
commit block still left on disk.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The write_journal_inode() code is only setting the low 32-bit i_size
for the journal size, even though it is possible to specify a journal
up to 10M blocks in size. Trying to create a journal larger than 2GB
will succeed, but an immediate e2fsck would fail. Store i_size_high
for the journal inode when creating it, and load it upon access.
Use s_jnl_blocks[15] to store the journal i_size_high backup. This
field is currently unused, as EXT2_N_BLOCKS is 15, so it is using
s_jnl_blocks[0..14], and i_size is in s_jnl_blocks[16].
Rename the "size" argument "num_blocks" for the journal creation functions
to clarify this parameter is in units of filesystem blocks and not bytes.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
O_DIRECT is not defined on OSX. Since direct IO is only a new
optimization and not needed for correct functionality, disable
it if O_DIRECT is unavailable.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The BLKFLSBUF and FDFLUSH ioctls are Linux specific, and do not
really have anything to do with __GNUC__ (which is also used on
OS/X and Solaris). Only print these warnings on Linux systems.
statfs64() is deprecated on OSX and generates a deliberate warning.
Fix some other warnings that show up on OSX builds.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This was reported as "control reaches end of non-void function",
but comparing to other similar functions it should be a void
function. Since it is only declared in the "private" ext2fsP.h
header, it should be OK to change the function prototype.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This was an "uninitialized variable" warning, but it turns out to be
a real bug. Without this change, it is not possible to use "icheck"
to find blocks that are used for the i_file_acl (xattr) block.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add description of missing dir_index feature to tune2fs(8) man page.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Older distros do not define posix_memalign() by default in the
headers. If ext2fs.h is included early in the headers, it is
possible to "#define _XOPEN_SOURCE 600" so that the stdlib.h
header will define it, but if ext2fs.h is included after stdlib.h
there is no posix_memalign() declaration.
Add a posix_memalign() declaration if stdlib.h didn't do it. This
is a bit of a hack for GNU headers, but it works on Linux and OS/X
without problems.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Teach ext2fs_expand_dir() and ext2fs_add_journal_inode() about
allocating blocks when clustered allocation is enabled.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Optimize ext2fs_new_block2() and ext2fs_get_free_blocks2() when
bigalloc is enabled. Also fix the uninitialized block bitmap code so
that it correctly deals clustered allocation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch makes the following changes:
* ext2fs_allocate_block_bitmap() now allocates a bitmap with cluster
granularity for bigalloc file systems. For mke2fs and e2fsck, a
newly added function, ext2fs_allocate_subcluster_bitmap() allocates
a bitmap with block granularity (even for bigalloc file systems).
The newly added function ext2fs_get_bitmap_granularity() will return
the number of bits (log2) of the granularity used by the bitmap.
* The ext2fs_{mark,unmark,test}_block_bitmap2() functions will shift
their passed-in argument by log2(cluster_ganularity) bits right.
This means that the arguments for the single-argument bitmap
functions will be interpreted with block granluarity, since this
minimizes code changes in the rest of the code base.
* The ext2fs_{get,set}_block_bitmap_range() functions will interpret
their arguments in cluster granularity. This is a bit inconsistent,
but the caller of those functions will need to be taught about the
subtleties of clusters for bigalloc file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If "mke2fs -n" is used, there should be no changes to the underlying
device. Unfortunately, when the "discard" option was added in commit
c7cd908be5, it did not check for the "-n"
flag, and will discard all data on a flash device even if "-n" is given.
Check for the "noaction" flag before discarding any filesystem data.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The log2 of the ratio of cluster size to block size is far more useful
than just storing the cluster size. So make this change, and then
define basic utility macros: EXT2FS_CLUSTER_RATIO(),
EXT2FS_CLUSTER_MASK(), EXT2FS_B2C(), EXT2FS_C2B(), and
EXT2FS_NUM_B2C().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the EXT2_MAX_BLOCKS_PER_GROUP so that it takes the cluster size
into account. This way we can open bigalloc file systems without
ext2fs_open() thinking that they are corrupt.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext2fs_open() check to make sure the cluster size superblock field
is the same as the block size field when the bigalloc feature is not
set. This is necessary since we will start introducing calculations
based on the cluster size field.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If $(LINK_INSTALL_FLAGS) is -f instead of -sf, the Makefile's install
rule would not work correctly while installing com_err.h
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I had an extremely corrupted customer filesystem which, after thousands
of lines of e2fsck output, found one more problem on an immediately
subsequent e2fsck. In short, a file had had its i_file_acl block
cloned due to being a duplicate. That ultimately got cleared
because the fs did not have the xattr feature, and the inode
was subsequently removed due to invalid mode.
The 2nd e2fsck pass found the cloned xattr block as in use, but
not owned by any file, and had to fix up the block bitmaps.
Simply skipping the processing of duplicate xattr blocks on a
non-xattr filesystem seems reasonable, since they will be cleared
later in any case.
(also fix existing brace misalignment)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the check of maximum check interval.
s_checkinterval is 32bit variable, so it cannot be set more than 2^32.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In e2fsprogs, the upper limit of reserved blocks count is a half of
filesystem's blocks count. This patch fixes the incorrect checks of
reserved blocks count.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Theodore Ts'o