With the recent patches AMS should be stable enough for daily use. It was
tested by several people in the last week without reporting back any problems.
So make it the new default on master.
Leave an env variable for now to deactivate it, in case something bad happens.
Reviewers: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5934
Summary:
As noted by Thomas L we're casting the scaleFactor to an int far too
early, which in the worst case means we end up with Aurorare themes not
rendering.
This moves the rounding to where it's used per border.
BUG: 380524
Test Plan:
Forced Xft.DPI to 95 with xrdb. Confirmed that it was broken
Applied this patch. Got decoration again
Reviewers: #plasma, mart
Reviewed By: #plasma, mart
Subscribers: mart, rikmills, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6099
Summary:
So far KWin started to filter out the escape key as soon as it gets
pressed. This was done by unsetting keyboard focus. The idea was to
reset keyboard focus when it is only a short press and that then the
keyboard state is correct for the application. But in practice this
does not work. The only application currently supporting pointer
constraints (Xwayland) does not do anything on a key which is pressed
when gaining keyboard focus. The result is escape not working in
pointer constrained Xwayland windows.
This change addresses this problem by changing the interaction to only
unset keyboard focus when our break constraints condition is met. This
should also result in the application not handling the key release, but
it means it gets the key press. Unfortunately I don't have a good way
to test.
BUG: 378452
Test Plan: None
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5488
Summary:
resourceClass is the more useful half of WM_CLASS. It's what modern X
clients are supposed to set to a .desktop file name, which is closer to
the semantics of appId than resourceName.
Reviewers: #plasma, graesslin
Subscribers: kwin, plasma-devel, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5815
Summary:
I keep having to re-add this patch locally to see which config is
actually in play.
Test Plan: Compiles
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5795
Summary:
TODO no longer applies since ShellClient::init already connects
SurfaceInterface::sizeChanged to update m_clientSize
Test Plan
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5787
This patch makes the AMS execution path work with the new DrmCrtc and
DrmBuffer structure and solves major issues about:
* VT switching
* DPMS
* Hot plugging
* Logout
* Memory leaks
Test Plan:
Tested with Gl and QPainter.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5191
Split off GBM based buffers to a separate file, which gets only included,
when GBM is available.
Note, that this also removes the gbmCallback, since already before this
patch we did delete the buffers always without it.
The plan is to later use this file for via GBM directly imported Wayland
buffers as well.
Test Plan:
Tested with Gl and QPainter backends.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5179
To get an image from KWin to the screen in the DRM pipeline we combine a CRTC,
an encoder and a connector. These objects are static in the sense, that they
represent real hardware on the graphics card, which doesn't change in a
session. See here for more details:
https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms.html
Until now we used DrmOutput as the main representation for such an active
rendering pipeline. I.e. it gets created and destroyed on hot plug events of
displays. On the other side we had no fixed representation of the static kernel
objects throughout the lifetime of KWin. This has several disadvantages:
* We always need to query all available static objects on an hot plug event.
* We can't manipulate the frame buffer of a CRTC after an output has been
disconnected
* Adding functionality for driving multiple displays on a single CRTC (i.e.
cloning) would be difficult
* We can't destroy the last frame buffer on display disconnect because the CRTC
still accesses it and have therefore a memory leak on every display disconnect
This patch solves these issues by storing representations of all available CRTC
and Connector objects in DrmBackend on init via DrmCrtc and DrmConnector
instances. On an hotplug event these vectors are looped for a fitting CRTC and
Connector combinations. Buffer handling is moved to the respective CRTC
instance. All changes in overview:
* Query all available CRTCs and Connectors and save for subsequent hotplug
events
* Fix logic errors in `queryResources()`
* Move framebuffers, buffer flip and blank logic in DrmCrtc
* Remove `restoreSaved()`. It isn't necessary and is dangerous if the old
framebuffer was deleted in the meantime. Also could reveal sensitive user
info from old session.
Test Plan:
Login, logout, VT switching, connect and disconnect external monitor, energy
saving mode.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5118
This is what 7ce380497f tried to do (and got reverted by my previous commit).
The approach is basically the same, just temporarily fake that the window
is on all activities, thus it will be temporarily shown for the session
interact, but this time there seem to be no broken side-effects (and if there
are, they'll be at least limited to activities and not break virtual desktops).
Also, 'needsSessionInteract' was a misnomer - it certainly wasn't set for all
windows that needed session interaction. Just call it what it really is.
Differential Revision: https://phabricator.kde.org/D5614
The member variable is not what determines which desktop a window is on,
it's more like caching the state. Therefore trying to fake a new value
eventually leads to inconsistencies, e.g. having KWrite open with unsaved
changes on inactive desktop results in the window ending up on all desktops
after session save (both successful and cancelled).
This pretty much reverts the whole 7ce380497f that introduced this and also
a0a976885c that tried to fix some of the problems resulting from it.
The original problem of session saving of windows of inactive activities still
remains, to be fixed by another commit.
Differential Revision: https://phabricator.kde.org/D5613
Summary:
Making QActions with the Connection as a parent is dangerous as it gets
moved to a new thread, moving all child objects to that thread.
KGlobalAccel and QAction aren't thread safe and we shouldn't be using it
in two threads. This was notably seen when runnng invokeShortcut over
DBus which then invokes it on the main thread. Something my laptop was
doing when I closed the lid.
This patch simply moves the code to the Input class, where we set up the
libinput connection.
Test Plan:
Closed lid, kwin_wayland was still there when I resumed
Set manual shortcut for toggling touchpad, that still worked
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5733
Summary:
Change 0bec9ad733 introduced a regrssion
on Wayland. On Wayland getTimestamp always returns 0, thus the X11
timestamp gets reset again and again. This results in broken interaction
for Xwayland windows as the broken unit tests show.
This change addresses the regression by ignoring a value of 0.
It means the addressed bug is still present on Wayland for X11 windows
as the timestamp doesn't get updated properly. This requires further
changes.
Test Plan: TestShade works again, testX11TimestampUpdate still works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5731
Summary:
Normally the xclipboardsyncer should terminate because the socket
becomes unusable. But we have reports of it not really going down and
running amok.
In order to prevent such situations this change registers SIGTERM to be
sent to xclipboardsyncer when the parent process (that is kwin_wayland)
dies in whatever way. This ensures that xclipboardsyncer cannot become
an orphan.
BUG: 371862
Test Plan: Only compile tested, no way to get into the problematic situation
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5589
Summary:
So far KWin only updated the x11 timestamp if the new timestamp is larger
than the existing one. While this is a useful thing it creates problems
when the 32 bit msec based time stamp wraps around which happens after
running an X server for 49 days. After the timestamp wrapped around KWin
would not update the timestamp any more and thus some calls might fail.
Most prominent victims are keyboard and pointer grab which fails as the
timestamp is either larger than the server timestamp or smaller than the
last grab timestamp.
Another problem related to timestamp handling is KWin getting broken by
wrong timestamps sent by applications. A prominent example is clusterssh
which used to send a timestamp as unix time which is larger than the
x timestamp and thus our timestamp gets too large.
This change addresses these problems by allowing to reset the timestamp.
This is only used from updateXTime (which is normally invoked before we
do things like grabKeyboard). Thus we make QX11Info::getTimestamp the
ultimate trusted source for timestamps.
BUG: 377901
BUG: 348569
FIXED-IN: 5.8.7
Test Plan: As I cannot wait 50 days: unit tests for the two conditions added.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5704
l10n daemon script