Main motivation for this change is that it's unhandy to have the class
definition in workspace.h and client.h while the implementation is in
events.cpp although nothing in events.cpp uses it directly.
By getting it out of workspace.h we get the header a little bit smaller
which should improve compile time given that it's included almost
everywhere.
In events.cpp the enum usage is changed to NETWinInfo as that's the class
where they are defined.
RootInfo does no longer hold a workspace pointer. Where it's needed it
uses the singleton accessor of Workspace.
REVIEW: 110199
Workspace is hardly interacting with Rules and all the Rules related code
is already in rules.cpp. This highly qualifies to move all the code out
of Workspace and improve the names.
REVIEW: 110207
The non-composited part handles the showWithX case with the four small
windows. The composited part shows a translucent QWidget with the
FrameSvg as done by the selection effect frame.
Outline connects to the Compositor toggled signal to switch the mode if
compositing gets suspended/resumed. This works fine also in the case that
the switch happens while the outline is shown. To support this Outline
is now a QObject and created with Workspace as a parent.
Given that the Outline handles both cases by itself, the outline effect
is no longer needed and is dropped together with all the hooks into the
effect system.
Overall all notifications except compositing suspended by DBus were
configured by default to not have any action. This means all the time we
emit a notification we keep DBus and KDED busy for nothing.
All the cases when a notification is triggered ire also exported to
KWin scripting, so if one really needs to handle something in case a
window is moved, it could be done through a KWin script with much more
context about the event.
REVIEW: 110113
BUG: 258097
FIXED-IN: 4.11
Following the approaches of other split out functionality Screens is a
singleton class created by Workspace.
The class takes over the responsibility for:
* screenChanged signal delayed by timer
* number of screens
* geometry of given screen
* active screen
* config option for active screen follows mouse
The class contains a small abstraction layer and has a concrete subclass
wrapping around QDesktopWidget, but the idea is to go more low level and
interact with XRandR directly to get more detailed information.
All over KWin the usage from QDesktopWidget is ported over to the new
Screens class.
REVIEW: 109839
This allows to move the slot to reset the decoration when compositing
got toggled from Workspace to DecorationPlugin and the custom cleanup
is no longer needed.
REVIEW: 109909
The define KWIN_SINGLETON adds to a class definition:
public:
static Foo *create(QObject *parent = 0);
static Foo *self() { return s_self; }
protected:
explicit Foo(QObject *parent = 0);
private:
static Foo *s_self;
There is an additional define KWIN_SINGLETON_VARIABLE to set a different
name than s_self.
The define KWIN_SINGLETON_FACTORY can be used to generate the create
method. It expands to:
Foo *Foo::s_self = 0;
Foo *Foo::create(QObject *parent)
{
Q_ASSERT(!s_self);
s_self = new Foo(parent);
return s_self;
}
In addition there are defines to again set a different variable name and
to create an object of another inheriting class.
All the classes currently using this pattern are adjusted to use these
new defines. In a few places the name was adjusted. E.g. in Compositor
the factory method was called createCompositor instead of create.
REVIEW: 109865
There is only one instance hold by Workspace which means it should follow
the common approach with ::self and ::create.
The hasTabBox is completely removed as it's rather useless and the same
as the ifdef around the usages any way.
REVIEW: 109851
All activities related code moves into new singleton class Activities.
This class gets only included into the build if the build option is
enabled which means there are less ifdefs all over the code and it also
handles better the moc doesn't like ifdef case.
The class holds the list of open and all activites, the current and the
previous activity and the KActivities::Controller. It also emits the
signals for any activities related changes.
Workspace still contains some activities related code. That is the
adjustment on change of current activity. Nevertheless the code looks
much cleaner now and does not contain the confusing naming conflict with
takeActivity() which existed before.
In all the places where Activities got used the code got adjusted and
quite often the ifdef got added with a fallback for the disabled case.
The hack used to be used to hide windows before they get embedded into
another window. This has been wrong on multiple levels:
1. it does not belong into a window manager - the window should take care
of this by itself
2. Window title is not a proper way to identify windows
3. Using D-Bus to inform an X11 window manager about windows which should
not get managed is rather strange
4. The hack only works with KWin, but not with any other X Window Manager
5. Windows identified with this hack still appear in Alt+Tab, that is
they are managed after all. Only a flicker is suppressed
6. Such windows are shown in the taskbar which nicely illustrates how
wrong a D-Bus call to the window manager is
That the hack has been introduced for Java Applets in KHTML also shows
that this is wrong. Why does Gecko and WebKit not need such a hack? Why
is KHTML tied so closely to X11 and KWin? Having a hack for a technology
which is obsoleted (Java Applets) and shouldn't be used due to security
issues is another reason to no longer support this hack. This usage has
been removed from KHTML as of 67939b1 of kdelibs git repo.
REVIEW: 109450
Following the approach to move out of Workspace what doesn't belong into
Workspace Appmenu support goes into an own class.
This also has the advantage of better compilation with Qt 5 as moc seems
to dislike ifdefs in the slot definitions.
REVIEW: 109497
according to NETWM spec implementation notes suggests
"focused windows having state _NET_WM_STATE_FULLSCREEN" to be on the highest layer.
We'll also take the screen into account
The user set stacking (being raised) is not considered by the spec note
This behavior is also suggested by an old comment in activation.cpp, void Workspace::setActiveClient()
BUG: 296076
CCBUG: 224600
REVIEW: 109572
FIXED-IN: 4.11
Many headers included KLocale to use i18n and co. But those methods are
defined in KLocalizedString and not in KLocale.
With KF5 klocale.h does no longer include KLocalizedString causing lots
of compile errors.
Where possible it is changed to Cursor::pos(), where we cannot use the
Cursor class (e.g. Aurorae) we can at least try to limit the usage to
prevent roundtrips to the X server.
REVIEW: 109178
With Qt5 QCursor does no longer provide ::handle() which was used to
set a cursor on a native XWindow for which we do not have a QWidget.
Also KWin has had for quite some time an optimized version to get the
cursor position without doing XQueryPointer each time ::pos() is called.
These two features are merged into a new class Cursor providing more or
less the same API as QCursor.
In addition the new class provides a facility to perform mouse polling
replacing the implementations in Compositor and ScreenEdges.
For more information about the new class see the documentation for the
new class in cursor.h.
The new class FocusChain manages two different kind of focus chains.
First of all there is a most recently used focus chain which is primarily
used for TabBox.
Then there is one focus chain per virtual desktop. These chains are used
to determine which Client needs to be activated when e.g. switching to a
virtual desktop.
The individual chains are implemented as a simple QList of Client* with
the most recently used Client as the last element. That way one can see
it as a LIFO like structure.
The desktop focus chains are internally represented as a hash with the id
of the virtual desktop as the key and a list as described as the value.
FocusChain is a singleton which provides some methods to manipulate the
chains and to get a specific Client for a task (e.g. TabBox).
While splitting out the code some unused code inside TabBox got removed
as well as some activities related code (windows cannot be moved while
switching activities).
REVIEW: 107494
Corners are still ours (it's a valid use case to still be able to switch
window through e.g. Present Windows even when running a fullscreen app).
How is it done? An Edge can be blocked and does no longer trigger if it
is blocked. For WindowBasedEdges the edge windows get unmapped in the
blocking case and mapped again when the blocking condition is no longer
valid.
The blocking is so far connected to:
* changes of active window
* changes of fullscreen windows
Whenever one of the events occurs it is checked whether there is:
1. an active client
2. it is fullscreen
3. on the same screen as the edge
If this is the case the edge will be blocked, otherwise unblocked.
BUG: 271607
FIXED-IN: 4.11
In fact it already used to be a Singleton as there is just one object
hold by the Singleton Workspace. So let's make it a proper Singleton
following our kind of standard approach of having a ::create factory
method called from Workspace ctor and a ::self to get to the singleton
instance.
This rewrite is mostly motivated by the need to handle multi screen
setups correctly. That is have edges per screen and not for the combined
geometry. Also porting from XLib to XCB has been a motivation for the
rewrite.
The design of the new ScreenEdge handling is described in the
documentation of ScreenEdges in screenedge.h.
In addition the following changes have been performed:
* move configuration from Options to ScreenEdge
* add screen edge information to Workspace::supportInformation (obviously
replaces what had been read from Options)
* have Workspace hold a pointer to ScreenEdges instead of an object
* forward declaration of ScreenEdges in workspaces.h, this explains the
seemingly unrelated changes of just another include in some files
BUG: 290887
FIXED-IN: 4.11
Use WindowAttributes and WindowGeometry everywhere where the xcb commands
had already been used.
Introduces another wrapper for overlay window and a subclass for query
tree which also wrapps the children command.
The extension handling is removed from kwinglobals and moved into the
xcbutils in KWin core in namespace KWin::Xcb. The motivation for this
change is that the Extensions are only used in KWin core and are marked
as internal. So there is no need to have them in the library.
What remains in Extensions are the non-native pixmaps. This will be
removed once we are on Qt 5 as QPixmap can no longer reference an XPixmap.
The remaining code in kwinglobals also still initialize the XLib versions
of extensions emitting events. It seems like there are no XEvents emitted
if not done so even if the extension is correctly initialized with xcb.
This needs to be removed once the event handling is ported over to xcb.
REVIEW: 107832
Adds a section about screens to supportInformation containing:
* whether multi-head is used
* in case of multi-head the screen number
* the number of screens
* geometry per screen
That should hopefully end the two often asked questions about the user's
screen setup, especially if they say they use multi-head.
REVIEW: 108363
Main motivation for this change except the fact that it doesn't belong
into Workspace is that the screen edges got updated from within setting
the desktop layout which got removed with the introduction of the
VirtualDesktopManager.
The ScreenEdge now keeps some state to be able to correctly unreserve the
electric borders when changes in the configuration are performed. There
is still room for improvement as there are still some deep function calls
from within reconfiguring in Workspace.
REVIEW: 107493
Most recently used virtual desktop chain is only used in the context of
TabBox and therefore moved into this namespace. KWin uses one desktop
chain for each activity. This is mapped by having multiple DesktopChains.
In addition there is a DesktopChainManager which contains all those
chains which are identified by a QString.
The manager gets connected to the signals emitted by VirtualDesktopManager
for changes in virtual desktops and to signals related to Activities
emitted by Workspace. This means the manager is rather generic as it does
not depend on any other components.
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
If a section of comments consists of a list of links and all are broken
it's a sign that nobody has used these comments for a long time...
REVIEW: 107933
Martin Gräßlin