The test in tests/avocado/machine_loongarch.py is currently failing
on big endian hosts like s390x. By comparing the traces between running
the QEMU_EFI.fd bios on a s390x and on a x86 host, it's quickly obvious
that the CSRRD instruction for the CPUID is behaving differently. And
indeed: The code currently does a long read (i.e. 64 bit) from the
address that points to the CPUState->cpu_index field (with tcg_gen_ld_tl()
in the trans_csrrd() function). But this cpu_index field is only an "int"
(i.e. 32 bit). While this dirty pointer magic works on little endian hosts,
it of course fails on big endian hosts. Fix it by using a proper helper
function instead.
Message-Id: <20230720175307.854460-1-thuth@redhat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit c34ad45992)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Type 13 is reserved, so using it should result in specification
exception. Due to an off-by-1 error the code triggers an assertion at a
later point in time instead.
Cc: qemu-stable@nongnu.org
Fixes: da4807527f ("s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-8-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit ff537b0370)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
MC requires bit positions 8-11 (upper 4 bits of class) to be zeros,
otherwise it must raise a specification exception.
Cc: qemu-stable@nongnu.org
Fixes: 20d143e2ca ("s390x/tcg: Implement MONITOR CALL")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 9c028c057a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context edit in target/s390x/tcg/translate.c)
When the mask is zero, access exceptions should still be recognized for
1 byte at the second-operand address. CC should be set to 0.
Cc: qemu-stable@nongnu.org
Fixes: e023e832d0 ("s390x: translate engine for s390x CPU")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit a2025557ed)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CONVERT TO LOGICAL/FIXED deviate from IEEE 754 in that they raise an
inexact exception on out-of-range inputs. float_flag_invalid_cvti
aligns nicely with that behavior, so convert it to
S390_IEEE_MASK_INEXACT.
Cc: qemu-stable@nongnu.org
Fixes: defb0e3157 ("s390x: Implement opcode helpers")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 53684e344a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When the mask is zero, access exceptions should still be recognized for
1 byte at the second-operand address. CC should be set to 0.
Cc: qemu-stable@nongnu.org
Fixes: defb0e3157 ("s390x: Implement opcode helpers")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 4b6e4c0b82)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
R2 designates an even-odd register pair; the instruction should raise
a specification exception when R2 is not even.
Cc: qemu-stable@nongnu.org
Fixes: e023e832d0 ("s390x: translate engine for s390x CPU")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 761b0aa938)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unfortunately
commit 03b6762144
(7.2: 6e216d21b5)
Author: Denis V. Lunev <den@openvz.org>
Date: Mon Jul 17 16:55:40 2023 +0200
qemu-nbd: pass structure into nbd_client_thread instead of plain char*
has introduced a regression. struct NbdClientOpts resides on stack inside
'if' block. This specifically means that this stack space could be reused
once the execution will leave that block of the code.
This means that parameters passed into nbd_client_thread could be
overwritten at any moment.
The patch moves the data to the namespace of main() function effectively
preserving it for the whole process lifetime.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: <qemu-stable@nongnu.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230727105828.324314-1-den@openvz.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit e5b815b0de)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: add reference to 6e216d21b5 for 7.2 branch)
Commit e6df58a557
Author: Hanna Reitz <hreitz@redhat.com>
Date: Wed May 8 23:18:18 2019 +0200
qemu-nbd: Do not close stderr
has introduced an interesting regression. Original behavior of
ssh somehost qemu-nbd /home/den/tmp/file -f raw --fork
was the following:
* qemu-nbd was started as a daemon
* the command execution is done and ssh exited with success
The patch has changed this behavior and 'ssh' command now hangs forever.
According to the normal specification of the daemon() call, we should
endup with STDERR pointing to /dev/null. That should be done at the
very end of the successful startup sequence when the pipe to the
bootstrap process (used for diagnostics) is no longer needed.
This could be achived in the same way as done for 'qemu-nbd -c' case.
That was commit 0eaf453e, also fixing up e6df58a5. STDOUT copying to
STDERR does the trick.
This also leads to proper 'ssh' connection closing which fixes my
original problem.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Hanna Reitz <hreitz@redhat.com>
CC: <qemu-stable@nongnu.org>
Message-ID: <20230717145544.194786-3-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 5c56dd27a2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We are going to pass additional flag inside next patch.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: <qemu-stable@nongnu.org>
Message-ID: <20230717145544.194786-2-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 03b6762144)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A wrong exit condition may lead to an infinite loop when inflating a
valid zlib buffer containing some extra bytes in the `inflate_buffer`
function. The bug only occurs post-authentication. Return the buffer
immediately if the end of the compressed data has been reached
(Z_STREAM_END).
Fixes: CVE-2023-3255
Fixes: 0bf41cab ("ui/vnc: clipboard support")
Reported-by: Kevin Denis <kevin.denis@synacktiv.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230704084210.101822-1-mcascell@redhat.com>
(cherry picked from commit d921fea338)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to the 82371FB documentation (82371FB.pdf, 2.3.9. BMIBA-BUS
MASTER INTERFACE BASE ADDRESS REGISTER, April 1997), the register is
32bit wide. To properly reset it to default values, all 32bit need to be
cleared. Bit #0 "Resource Type Indicator (RTE)" needs to be enabled.
The initial change wrote just the lower 8 bit, leaving parts of the "Bus
Master Interface Base Address" address at bit 15:4 unchanged.
Fixes: e6a71ae327 ("Add support for 82371FB (Step A1) and Improved support for 82371SB (Function 1)")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230712074721.14728-1-olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 230dfd9257)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
x and y offsets and width and height of the scanout texture
is not correctly configured in case guest scanout frame is
dmabuf.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-ID: <20230621213150.29573-1-dongwon.kim@intel.com>
(cherry picked from commit 37802a24eb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When vfio_enable_vectors() returns with less than requested nr_vectors
we retry with what kernel reported back. But the retry path doesn't
call vfio_prepare_kvm_msi_virq_batch() and this results in,
qemu-system-aarch64: vfio: Error: Failed to enable 4 MSI vectors, retry with 1
qemu-system-aarch64: ../hw/vfio/pci.c:602: vfio_commit_kvm_msi_virq_batch: Assertion `vdev->defer_kvm_irq_routing' failed
Fixes: dc580d51f7 ("vfio: defer to commit kvm irq routing when enable msi/msix")
Reviewed-by: Longpeng <longpeng2@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit c174088923)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The kvm irqchip notifier is only registered if the device supports
INTx, however it's unconditionally removed in vfio realize error
path. If the assigned device does not support INTx, this will cause
QEMU to crash when vfio realize fails. Change it to conditionally
remove the notifier only if the notify hook is setup.
Before fix:
(qemu) device_add vfio-pci,host=81:11.1,id=vfio1,bus=root1,xres=1
Connection closed by foreign host.
After fix:
(qemu) device_add vfio-pci,host=81:11.1,id=vfio1,bus=root1,xres=1
Error: vfio 0000:81:11.1: xres and yres properties require display=on
(qemu)
Fixes: c5478fea27 ("vfio/pci: Respond to KVM irqchip change notifier")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit 357bd7932a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It is possible to store a very large value to the decrementer that it
does not raise the decrementer exception so the timer is scheduled, but
the next time value wraps and is treated as in the past.
This can occur if (u64)-1 is stored on a zero-triggered exception, or
(u64)-1 is stored twice on an underflow-triggered exception, for
example.
If such a value is set in DECAR, it gets stored to the decrementer by
the timer function, which then immediately causes another timer, which
hangs QEMU.
Clamp the decrementer to the implemented width, and use that as the
value for the timer calculation, effectively preventing this overflow.
Reported-by: sdicaro@DDCI.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530131214.373524-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
(cherry picked from commit 09d2db9f46)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU does not emulate it so it must be disabled as long as the backend
does not support it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602173328.1917385-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
(cherry picked from commit 51e84244a7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The icount-based QEMU_CLOCK_VIRTUAL runs ahead of the RT clock at times.
When warping, it is possible it is still ahead at the end of the warp,
which causes icount adaptive mode to adjust it backward. This can result
in the machine observing time going backwards.
Prevent this by clamping adaptive adjustment to 0 at minimum.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230627061406.241847-1-npiggin@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 67f85346ca)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the case where the console does not have gl capability, and
if blob is set to true, make sure that the display updates still
work. Commit e86a93f554 accidentally broke this by misplacing
the return statement (in resource_flush) causing the updates to
be silently ignored.
Fixes: e86a93f554 ("virtio-gpu: splitting one extended mode guest fb into n-scanouts")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230623060454.3749910-1-vivek.kasireddy@intel.com>
(cherry picked from commit 34e29d85a7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When a peer nic is still attached to the vdpa backend, it is too early to free
up the vhost-net and vdpa structures. If these structures are freed here, then
QEMU crashes when the guest is being shut down. The following call chain
would result in an assertion failure since the pointer returned from
vhost_vdpa_get_vhost_net() would be NULL:
do_vm_stop() -> vm_state_notify() -> virtio_set_status() ->
virtio_net_vhost_status() -> get_vhost_net().
Therefore, we defer freeing up the structures until at guest shutdown
time when qemu_cleanup() calls net_cleanup() which then calls
qemu_del_net_client() which would eventually call vhost_vdpa_cleanup()
again to free up the structures. This time, the loop in net_cleanup()
ensures that vhost_vdpa_cleanup() will be called one last time when
all the peer nics are detached and freed.
All unit tests pass with this change.
CC: imammedo@redhat.com
CC: jusual@redhat.com
CC: mst@redhat.com
Fixes: CVE-2023-3301
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128929
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230619065209.442185-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a0d7215e33)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context change for stable-7.2)
Bug introducing when refactoring. Otherway, the guest never received
the used buffer.
Fixes: be4278b65f ("vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602173451.1917999-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
(cherry picked from commit d45243bcfc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vhost_dev_start function does not release memory_listener object
in case of an error. This may crash the guest when vhost is unable
to set memory table:
stack trace of thread 125653:
Program terminated with signal SIGSEGV, Segmentation fault
#0 memory_listener_register (qemu-kvm + 0x6cda0f)
#1 vhost_dev_start (qemu-kvm + 0x699301)
#2 vhost_net_start (qemu-kvm + 0x45b03f)
#3 virtio_net_set_status (qemu-kvm + 0x665672)
#4 qmp_set_link (qemu-kvm + 0x548fd5)
#5 net_vhost_user_event (qemu-kvm + 0x552c45)
#6 tcp_chr_connect (qemu-kvm + 0x88d473)
#7 tcp_chr_new_client (qemu-kvm + 0x88cf83)
#8 tcp_chr_accept (qemu-kvm + 0x88b429)
#9 qio_net_listener_channel_func (qemu-kvm + 0x7ac07c)
#10 g_main_context_dispatch (libglib-2.0.so.0 + 0x54e2f)
Release memory_listener objects in the error path.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-2-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 1e3ffb34f7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Update SeaBIOS-hppa to version 8.
Fixes:
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes & machine run status
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit 34ec3aea54)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Update SeaBIOS-hppa to version 7 which fixes a boot problem
with Debian-12 install CD images.
The problem with Debian-12 is, that the ramdisc got bigger
than what the firmware could load in one call to the LSI
scsi driver.
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit bb9c998ca9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: pick this one before picking next 34ec3aea54 "SeaBIOS-hppa version 8")
Give current QEMU version string to SeaBIOS-hppa via fw_cfg interface so
that the firmware can show the QEMU version in the boot menu info.
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit 069d296669)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When the OS triggers a reboot, the reset helper function sends a
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET) together with an
EXCP_HLT exception to halt the CPUs.
So, at reboot when initializing the CPUs again, make sure to set all
instruction pointers to the firmware entry point, disable any interrupts,
disable data and instruction translations, enable PSW_Q bit and tell qemu
to unhalt (halted=0) the CPUs again.
This fixes the various reboot issues which were seen when rebooting a
Linux VM, including the case where even the monarch CPU has been virtually
halted from the OS (e.g. via "chcpu -d 0" inside the Linux VM).
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit 50ba97e928)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The xkb official name for the Arabic keyboard layout is 'ara'.
However xkb has for at least the past 15 years also permitted it to
be named via the legacy synonym 'ar'. In xkeyboard-config 2.39 this
synoynm was removed, which breaks compilation of QEMU:
FAILED: pc-bios/keymaps/ar
/home/fred/qemu-git/src/qemu/build-full/qemu-keymap -f pc-bios/keymaps/ar -l ar
xkbcommon: ERROR: Couldn't find file "symbols/ar" in include paths
xkbcommon: ERROR: 1 include paths searched:
xkbcommon: ERROR: /usr/share/X11/xkb
xkbcommon: ERROR: 3 include paths could not be added:
xkbcommon: ERROR: /home/fred/.config/xkb
xkbcommon: ERROR: /home/fred/.xkb
xkbcommon: ERROR: /etc/xkb
xkbcommon: ERROR: Abandoning symbols file "(unnamed)"
xkbcommon: ERROR: Failed to compile xkb_symbols
xkbcommon: ERROR: Failed to compile keymap
The upstream xkeyboard-config change removing the compat
mapping is:
470ad2cd8f
Make QEMU always ask for the 'ara' xkb layout, which should work on
both older and newer xkeyboard-config. We leave the QEMU name for
this keyboard layout as 'ar'; it is not the only one where our name
for it deviates from the xkb standard name.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230620162024.1132013-1-peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1709
(cherry picked from commit 497fad3897)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We use __builtin_subcll() to do a 64-bit subtract with borrow-in and
borrow-out when the host compiler supports it. Unfortunately some
versions of Apple Clang have a bug in their implementation of this
intrinsic which means it returns the wrong value. The effect is that
a QEMU built with the affected compiler will hang when emulating x86
or m68k float80 division.
The upstream LLVM issue is:
https://github.com/llvm/llvm-project/issues/55253
The commit that introduced the bug apparently never made it into an
upstream LLVM release without the subsequent fix
fffb6e6afd
but unfortunately it did make it into Apple Clang 14.0, as shipped
in Xcode 14.3 (14.2 is reported to be OK). The Apple bug number is
FB12210478.
Add ifdefs to avoid use of __builtin_subcll() on Apple Clang version
14 or greater. There is not currently a version of Apple Clang which
has the bug fix -- when one appears we should be able to add an upper
bound to the ifdef condition so we can start using the builtin again.
We make the lower bound a conservative "any Apple clang with major
version 14 or greater" because the consequences of incorrectly
disabling the builtin when it would work are pretty small and the
consequences of not disabling it when we should are pretty bad.
Many thanks to those users who both reported this bug and also
did a lot of work in identifying the root cause; in particular
to Daniel Bertalan and osy.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1631
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1659
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Bertalan <dani@danielbertalan.dev>
Tested-by: Tested-By: Solra Bizna <solra@bizna.name>
Message-id: 20230622130823.1631719-1-peter.maydell@linaro.org
(cherry picked from commit b0438861ef)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The nrf51_timer has a free-running counter which we implement using
the pattern of using two fields (update_counter_ns, counter) to track
the last point at which we calculated the counter value, and the
counter value at that time. Then we can find the current counter
value by converting the difference in wall-clock time between then
and now to a tick count that we need to add to the counter value.
Unfortunately the nrf51_timer's implementation of this has a bug
which means it loses time every time update_counter() is called.
After updating s->counter it always sets s->update_counter_ns to
'now', even though the actual point when s->counter hit the new value
will be some point in the past (half a tick, say). In the worst case
(guest code in a tight loop reading the counter, icount mode) the
counter is continually queried less than a tick after it was last
read, so s->counter never advances but s->update_counter_ns does, and
the guest never makes forward progress.
The fix for this is to only advance update_counter_ns to the
timestamp of the last tick, not all the way to 'now'. (This is the
pattern used in hw/misc/mps2-fpgaio.c's counter.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230606134917.3782215-1-peter.maydell@linaro.org
(cherry picked from commit d2f9a79a8c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In commit 2c5fa0778c we fixed an endianness bug in the Allwinner
A10 PIC model; however in the process we introduced a regression.
This is because the old code was robust against the incoming 'level'
argument being something other than 0 or 1, whereas the new code was
not.
In particular, the allwinner-sdhost code treats its IRQ line
as 0-vs-non-0 rather than 0-vs-1, so when the SD controller
set its IRQ line for any reason other than transmit the
interrupt controller would ignore it. The observed effect
was a guest timeout when rebooting the guest kernel.
Handle level values other than 0 or 1, to restore the old
behaviour.
Fixes: 2c5fa0778c ("hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()")
(Mjt: 5eb742fce5 in stable-7.2)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230606104609.3692557-2-peter.maydell@linaro.org
(cherry picked from commit f837b468cd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The LDG instruction loads the tag from a memory address (identified
by [Xn + offset]), and then merges that tag into the destination
register Xt. We implemented this correctly for the case when
allocation tags are enabled, but didn't get it right when ATA=0:
instead of merging the tag bits into Xt, we merged them into the
memory address [Xn + offset] and then set Xt to that.
Merge the tag bits into the old Xt value, as they should be.
Cc: qemu-stable@nongnu.org
Fixes: c15294c1e3 ("target/arm: Implement LDG, STG, ST2G instructions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 7e2788471f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The atomic memory operations are supposed to return the old memory
data value in the destination register. This value is not
sign-extended, even if the operation is the signed minimum or
maximum. (In the pseudocode for the instructions the returned data
value is passed to ZeroExtend() to create the value in the register.)
We got this wrong because we were doing a 32-to-64 zero extend on the
result for 8 and 16 bit data values, rather than the correct amount
of zero extension.
Fix the bug by using ext8u and ext16u for the MO_8 and MO_16 data
sizes rather than ext32u.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-2-peter.maydell@linaro.org
(cherry picked from commit 243705aa6e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As mentioned in docs/devel/style.rst "Automatic memory deallocation":
* Variables declared with g_auto* MUST always be initialized,
otherwise the cleanup function will use uninitialized stack memory
This avoids QEMU to coredump when running the "hash test" command
under Zephyr.
Cc: Steven Lee <steven_lee@aspeedtech.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-stable@nongnu.org
Fixes: c5475b3f9a ("hw: Model ASPEED's Hash and Crypto Engine")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20230421131547.2177449-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
(cherry picked from commit c8f48b120b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Command "qemu-system-riscv64 -machine virt
-m 2G -smp 1 -numa node,mem=1G -numa node,mem=1G"
would trigger this problem.Backtrace with:
#0 0x0000555555b5b1a4 in riscv_numa_get_default_cpu_node_id at ../hw/riscv/numa.c:211
#1 0x00005555558ce510 in machine_numa_finish_cpu_init at ../hw/core/machine.c:1230
#2 0x00005555558ce9d3 in machine_run_board_init at ../hw/core/machine.c:1346
#3 0x0000555555aaedc3 in qemu_init_board at ../softmmu/vl.c:2513
#4 0x0000555555aaf064 in qmp_x_exit_preconfig at ../softmmu/vl.c:2609
#5 0x0000555555ab1916 in qemu_init at ../softmmu/vl.c:3617
#6 0x000055555585463b in main at ../softmmu/main.c:47
This commit fixes the issue by adding parameter checks.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Yin Wang <yin.wang@intel.com>
Message-Id: <20230519023758.1759434-1-yin.wang@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit b9cedbf19c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some of the PMU hflags bits can go out of synch, for example a store to
MMCR0 with PMCjCE=1 fails to update hflags correctly and results in
hflags mismatch:
qemu: fatal: TCG hflags mismatch (current:0x2408003d rebuilt:0x240a003d)
This can be reproduced by running perf on a recent machine.
Some of the fragility here is the duplication of PMU hflags calculations.
This change consolidates that in a single place to update pmu-related
hflags, to be called after a well defined state changes.
The post-load PMU update is pulled out of the MSR update because it does
not depend on the MSR value.
Fixes: 8b3d1c49a9 ("target/ppc: Add new PMC HFLAGS")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530130447.372617-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
(cherry picked from commit 6494d2c1fd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ppc hypervisors turn HEAI interrupts into program interrupts injected
into the guest that executed the illegal instruction, if the hypervisor
doesn't handle it some other way.
The nested-hv implementation failed to account for this HEAI->program
conversion. The virtual hypervisor wants to see the HEAI when running
a nested guest, so that interrupt type can be returned to its KVM
caller.
Fixes: 7cebc5db2e ("target/ppc: Introduce a vhyp framework for nested HV support")
Cc: balaton@eik.bme.hu
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230530132127.385001-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
(cherry picked from commit 6c242e79b8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
lqarx does not set cpu_reserve, which causes stqcx. to never succeed.
Cc: qemu-stable@nongnu.org
Fixes: 94bf265867 ("target/ppc: Use atomic load for LQ and LQARX")
Fixes: 57b38ffd0c ("target/ppc: Use tcg_gen_qemu_{ld,st}_i128 for LQARX, LQ, STQ")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230605025445.161932-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
(cherry picked from commit e025e8f5a8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
job may be NULL if queue->exit is true. Check
it before dereference job.
Fixes: f31f9c1080 ("vnc: add magic cookie to VncState")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit bdfca8a22f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The printed offset value is prefixed with 0x, but was actually printed
in decimal. To spare others the confusion, adjust the format specifier
to hexadecimal.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 5fb9e82955)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 9p protocol does not specifically define how server shall behave when
client tries to open a special file, however from security POV it does
make sense for 9p server to prohibit opening any special file on host side
in general. A sane Linux 9p client for instance would never attempt to
open a special file on host side, it would always handle those exclusively
on its guest side. A malicious client however could potentially escape
from the exported 9p tree by creating and opening a device file on host
side.
With QEMU this could only be exploited in the following unsafe setups:
- Running QEMU binary as root AND 9p 'local' fs driver AND 'passthrough'
security model.
or
- Using 9p 'proxy' fs driver (which is running its helper daemon as
root).
These setups were already discouraged for safety reasons before,
however for obvious reasons we are now tightening behaviour on this.
Fixes: CVE-2023-2861
Reported-by: Yanwu Shen <ywsPlz@gmail.com>
Reported-by: Jietao Xiao <shawtao1125@gmail.com>
Reported-by: Jinku Li <jkli@xidian.edu.cn>
Reported-by: Wenbo Shen <shenwenbo@zju.edu.cn>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <E1q6w7r-0000Q0-NM@lizzy.crudebyte.com>
(cherry picked from commit f6b0de53fb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: drop adding qemu_fstat wrapper for 7.2 where wrappers aren't used)
Allow the Linux guest agent to attempt each of the suspend methods
(systemctl, pm-* and writing to /sys) in turn.
Prior to this guests without systemd failed to suspend due to
`guest_suspend` returning early regardless of the return value of
`systemd_supports_mode`.
Signed-off-by: Mark Somerville <mark@qpok.net>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
(cherry picked from commit 86dcb6ab9b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix a typo in the system documentation for multi-process QEMU.
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 7771e8b863)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In qemu-user-s390x, /proc/cpuinfo contains:
processor 0: version = 00, identification = 000000, machine = 8561
processor 1: version = 00, identification = 400000, machine = 8561
The highest nibble is supposed to contain the CPU address, but it's off
by 2 bits. Fix the shift value and provide a symbolic constant for it.
With the fix we get:
processor 0: version = 00, identification = 000000, machine = 8561
processor 1: version = 00, identification = 100000, machine = 8561
Fixes: 076d4d39b6 ("s390x/cpumodel: wire up cpu type + id for TCG")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230605113950.1169228-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 71b11cbe1c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230510230213.330134-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit be4a4cb429)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently single-stepping SVC executes two instructions. The reason is
that EXCP_DEBUG for the SVC instruction itself is masked by EXCP_SVC.
Fix by re-raising EXCP_DEBUG.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230510230213.330134-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 01b9990a3f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a small test to prevent regressions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230526181240.1425579-5-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 230976232f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a test to prevent regressions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230526181240.1425579-3-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 05d000fb4d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
LCBB is supposed to overwrite only the bottom 32 bits, but QEMU
erroneously overwrites the entire register.
Fixes: 6d9303322e ("s390x/tcg: Implement LOAD COUNT TO BLOCK BOUNDARY")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230526181240.1425579-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 079181b9bc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth