How to control the booting of QEMU is often a source of confusion for
users. Bring the options that control this together in the manual
pages and add some verbiage to describe when each option is
appropriate. This attempts to codify some of the knowledge expressed
in:
https://stackoverflow.com/questions/58420670/qemu-bios-vs-kernel-vs-device-loader-file/58434837#58434837
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220725140520.515340-14-alex.bennee@linaro.org>
Since 30b5707c26 (qom: Remove module_obj_name parameter from
OBJECT_DECLARE* macros) we don't need the additional two parameters.
Fix the documentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220725140520.515340-13-alex.bennee@linaro.org>
Add a small test to avoid regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220725223746.227063-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently QEMU exits with code 0 on both panic an shutdown. For tests
it is useful to return 1 on panic, so that it counts as a test
failure.
Introduce a new exit-failure PanicAction that makes main() return
EXIT_FAILURE. Tests can use -action panic=exit-failure option to
activate this behavior.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220725223746.227063-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The TARGET_SYS_TMPNAM implementation has two bugs spotted by
Coverity:
* confusion about whether 'len' has the length of the string
including or excluding the terminating NUL means we
lock_user() len bytes of memory but memcpy() len + 1 bytes
* In the error-exit cases we forget to free() the buffer
that asprintf() returned to us
Resolves: Coverity CID 1490285, 1490289
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220719121110.225657-5-peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220725140520.515340-10-alex.bennee@linaro.org>
The SET_ARG() macro returns an error indication; we check this in the
TARGET_SYS_GET_CMDLINE case but not when we use it in implementing
TARGET_SYS_ELAPSED. Check for and handle the errors via the do_fault
codepath, and update the comment documenting the SET_ARG() and
GET_ARG() macros to note how they handle memory access errors.
Resolves: Coverity CID 1490287
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220719121110.225657-4-peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220725140520.515340-9-alex.bennee@linaro.org>
The console_write() semihosting function outputs guest data from a
buffer; it doesn't update that buffer. It therefore doesn't need to
pass a length value to unlock_user(), but can pass 0, meaning "do not
copy any data back to the guest memory".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220719121110.225657-3-peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220725140520.515340-8-alex.bennee@linaro.org>
The documentation comment for qemu_semihosting_console_write() says
* Returns: number of bytes written -- this should only ever be short
* on some sort of i/o error.
and the callsites rely on this. However, the implementation code
path which sends console output to a chardev doesn't honour this,
and will return negative values on error. Bring it into line with
the other implementation codepaths and the documentation, so that
it returns 0 on error.
Spotted by Coverity, because console_write() passes the return value
to unlock_user(), which doesn't accept a negative length.
Resolves: Coverity CID 1490288
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220719121110.225657-2-peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220725140520.515340-7-alex.bennee@linaro.org>
The following error message was seen during the configure:
"ln: failed to create symbolic link
'x86_64-softmmu/qemu-system-x86_64.exe': No such file or directory"
By default the MSYS environment variable is not defined, so the runtime
behavior of winsymlinks is: if <target> does not exist, 'ln -s' fails.
At the configure phase, the qemu-system-x86_64.exe has not been built
so creation of the symbolic link fails hence the error message.
Set winsymlinks to 'native' whose behavior is most similar to the
behavior of 'ln -s' on *nix, that is:
a) if native symlinks are enabled, and whether <target> exists
or not, creates <destination> as a native Windows symlink;
b) else if native symlinks are not enabled, and whether <target>
exists or not, 'ln -s' creates as a Windows shortcut file.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220725123000.807608-1-bmeng.cn@gmail.com>
Message-Id: <20220725140520.515340-6-alex.bennee@linaro.org>
At present winsymlinks is set to 'nativestrict', and its behavior is:
a) if native symlinks are enabled and <target> exists, creates
<destination> as a native Windows symlink;
b) else if native symlinks are not enabled or if <target> does
not exist, 'ln -s' fails.
This causes the following error message was seen during the configure:
"ln: failed to create symbolic link
'x86_64-softmmu/qemu-system-x86_64.exe': No such file or directory"
Change winsymlinks to 'native' whose behavior is most similar to the
behavior of 'ln -s' on *nix, that is:
a) if native symlinks are enabled, and whether <target> exists
or not, creates <destination> as a native Windows symlink;
b) else if native symlinks are not enabled, and whether <target>
exists or not, 'ln -s' creates as a Windows shortcut file.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20220719161230.766063-1-bmeng.cn@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220725140520.515340-5-alex.bennee@linaro.org>
Since we express dependencies via a 'needs' clause, we don't need to
split container builds into separate stages. GitLab happily lets jobs
depend on other jobs in the same stage and will run them when possible.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220722130431.2319019-4-berrange@redhat.com>
[AJB: fix typo]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220725140520.515340-4-alex.bennee@linaro.org>
When tests fail meson just displays a summary and tells you to look at
the testlog.txt file for details. The native jobs on shared runners
publish testlog.txt as an artifact. For the Cirrus jobs and custom
runner jobs this is not currently possible. The best we can do is cat
the log contents on failure, to give maintainers a fighting chance
of diagnosing the problem.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220722130431.2319019-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220725140520.515340-3-alex.bennee@linaro.org>
Notable changes:
- libvirt-ci source tree was re-arranged, so the script we
run now lives in a bin/ sub-dir
- opensuse 15.2 is replaced by opensuse 15.3
- libslirp is temporarily dropped on opensuse as the
libslirp-version.h is broken
https://bugzilla.opensuse.org/show_bug.cgi?id=1201551
- The incorrectly named python3-virtualenv module was
changed to python3-venv, but most distros don't need
any package as 'venv' is a standard part of python
- glibc-static was renamed to libc-static, to reflect
fact that it isn't going to be glibc on all distros
- The cmocka/json-c deps that were manually added to
the centos dockerfile and are now consistently added
to all targets
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220722130431.2319019-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220725140520.515340-2-alex.bennee@linaro.org>
Short queue with 2 Coverity fixes and one fix of the
'wait' insns that is causing hangs if the guest kernel uses
the most up to date wait opcode.
- target/ppc:
- implement new wait variants to fix guest hang when using the new opcode
- ppc440_uc: initialize length passed to cpu_physical_memory_map()
- spapr_nvdimm: check if spapr_drc_index() returns NULL
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYuK8VgAKCRA82cqW3gMx
ZOc7AQDPMsFY9NHNqJ3O0MiX4Qoy8IGUreZ9dzZSS3zT1nxtEAD+Lwl0/aGO+dk+
+NiIO80A5Agy/0g8PHie4qR3EqHEnwA=
=Q4eR
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220728' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-07-28:
Short queue with 2 Coverity fixes and one fix of the
'wait' insns that is causing hangs if the guest kernel uses
the most up to date wait opcode.
- target/ppc:
- implement new wait variants to fix guest hang when using the new opcode
- ppc440_uc: initialize length passed to cpu_physical_memory_map()
- spapr_nvdimm: check if spapr_drc_index() returns NULL
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYuK8VgAKCRA82cqW3gMx
# ZOc7AQDPMsFY9NHNqJ3O0MiX4Qoy8IGUreZ9dzZSS3zT1nxtEAD+Lwl0/aGO+dk+
# +NiIO80A5Agy/0g8PHie4qR3EqHEnwA=
# =Q4eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 28 Jul 2022 09:41:58 AM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220728' of https://gitlab.com/danielhb/qemu:
target/ppc: Implement new wait variants
hw/ppc/ppc440_uc: Initialize length passed to cpu_physical_memory_map()
hw/ppc: check if spapr_drc_index() returns NULL in spapr_nvdimm.c
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ISA v2.06 adds new variations of wait, specified by the WC field. These
are not all compatible with the prior wait implementation, because they
add additional conditions that cause the processor to resume, which can
cause software to hang or run very slowly.
At this moment, with the current wait implementation and a pseries guest
using mainline kernel with new wait upcodes [1], QEMU hangs during boot if
more than one CPU is present:
qemu-system-ppc64 -M pseries,x-vof=on -cpu POWER10 -smp 2 -nographic
-kernel zImage.pseries -no-reboot
QEMU will exit (as there's no filesystem) if the test "passes", or hang
during boot if it hits the bug.
ISA v3.0 changed the wait opcode and removed the new variants (retaining
the WC field but making non-zero values reserved).
ISA v3.1 added new WC values to the new wait opcode, and added a PL
field.
This patch implements the new wait encoding and supports WC variants
with no-op implementations, which provides basic correctness as
explained in comments.
[1] https://lore.kernel.org/all/20220720132132.903462-1-npiggin@gmail.com/
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220720133352.904263-1-npiggin@gmail.com>
[danielhb: added information about the bug being fixed]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In dcr_write_dma(), there is code that uses cpu_physical_memory_map()
to implement a DMA transfer. That function takes a 'plen' argument,
which points to a hwaddr which is used for both input and output: the
caller must set it to the size of the range it wants to map, and on
return it is updated to the actual length mapped. The dcr_write_dma()
code fails to initialize rlen and wlen, so will end up mapping an
unpredictable amount of memory.
Initialize the length values correctly, and check that we managed to
map the entire range before using the fast-path memmove().
This was spotted by Coverity, which points out that we never
initialized the variables before using them.
Fixes: Coverity CID 1487137, 1487150
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220726182341.1888115-2-peter.maydell@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
spapr_nvdimm_flush_completion_cb() and flush_worker_cb() are using the
DRC object returned by spapr_drc_index() without checking it for NULL.
In this case we would be dereferencing a NULL pointer when doing
SPAPR_NVDIMM(drc->dev) and PC_DIMM(drc->dev).
This can happen if, during a scm_flush(), the DRC object is wrongly
freed/released (e.g. a bug in another part of the code).
spapr_drc_index() would then return NULL in the callbacks.
Fixes: Coverity CID 1487108, 1487178
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220409200856.283076-2-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is a PR to go in for RC1. It fixes a segfault that occurs
when using multiple sockets on the RISC-V virt board. It also
includes a small fix to allow both Zmmul and M extensions.
* Allow both Zmmul and M extension
* Fix multi-socket plic configuraiton
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmLh33AACgkQIeENKd+X
cFROBQf/QFxHsIX9clpAkHmK220efQ3rjHZtdCqQoCeRZp2EytFS9KZ6iae/BM9r
3Z8cZci38kxjqTzsYJLj46yNO3AxHoFsDH41yWTMOsxjVWVlno/06R/C1B4Ek37N
kZXWKHzqfQvZRJIUAjKfVxaLtw9xRI9xYqWxVngdYSoW3HWHHz5UmA6fFoJ29QiZ
SKEgxhakrqhvN9GMm1aWGkLN10uD5lFWOBMYdqMVcWq48XSP3Df5FU2Xk0sfegXq
EqbIYKJL/Q6koyvmdpQz7VmtMAGjMTcmozEH8oN/MuCk7MCLmbloWVl+LF39SeTH
3amapiJBtYBOwaNZUpb5TZkv/bEDIw==
=ip1R
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20220728' of github.com:alistair23/qemu into staging
Sixth RISC-V PR for QEMU 7.1
This is a PR to go in for RC1. It fixes a segfault that occurs
when using multiple sockets on the RISC-V virt board. It also
includes a small fix to allow both Zmmul and M extensions.
* Allow both Zmmul and M extension
* Fix multi-socket plic configuraiton
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmLh33AACgkQIeENKd+X
# cFROBQf/QFxHsIX9clpAkHmK220efQ3rjHZtdCqQoCeRZp2EytFS9KZ6iae/BM9r
# 3Z8cZci38kxjqTzsYJLj46yNO3AxHoFsDH41yWTMOsxjVWVlno/06R/C1B4Ek37N
# kZXWKHzqfQvZRJIUAjKfVxaLtw9xRI9xYqWxVngdYSoW3HWHHz5UmA6fFoJ29QiZ
# SKEgxhakrqhvN9GMm1aWGkLN10uD5lFWOBMYdqMVcWq48XSP3Df5FU2Xk0sfegXq
# EqbIYKJL/Q6koyvmdpQz7VmtMAGjMTcmozEH8oN/MuCk7MCLmbloWVl+LF39SeTH
# 3amapiJBtYBOwaNZUpb5TZkv/bEDIw==
# =ip1R
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 27 Jul 2022 05:59:28 PM PDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20220728' of github.com:alistair23/qemu:
hw/intc: sifive_plic: Fix multi-socket plic configuraiton
RISC-V: Allow both Zmmul and M
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 40244040a7, multi-socket configuration with plic is
broken as the hartid for second socket is calculated incorrectly.
The hartid stored in addr_config already includes the offset
for the base hartid for that socket. Adding it again would lead
to segfault while creating the plic device for the virt machine.
qdev_connect_gpio_out was also invoked with incorrect number of gpio
lines.
Fixes: 40244040a7 (hw/intc: sifive_plic: Avoid overflowing the addr_config buffer)
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220723090335.671105-1-atishp@rivosinc.com>
[ Changes by AF:
- Change the qdev_connect_gpio_out() numbering
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We got to talking about how Zmmul and M interact with each other
https://github.com/riscv/riscv-isa-manual/issues/869 , and it turns out
that QEMU's behavior is slightly wrong: having Zmmul and M is a legal
combination, it just means that the multiplication instructions are
supported even when M is disabled at runtime via misa.
This just stops overriding M from Zmmul, with that the other checks for
the multiplication instructions work as per the ISA.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220714180033.22385-1-palmer@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Several fixes. From now on, regression fixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmLgQr8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGUUIAKtNhrnKopGm4LlRpx8zN3Jc1Jo0nb648gaM
Oyi+Pl8+hpESUhaWN10XDk38/QuPQfIFeR2ZhfYjFTRlZE+n3X9LVlwL8ejjP8KH
AcWm78Ff/SLA45aMKMmw74pvEDNsoPYTp7TrfeIej5ub8BIXr8+8pqDdIR9WwtWO
PbhLNXkTT2yLEs6jCVT4/dyh7zivSkrY7G/RVmtUaFe3PgY8fdW2z3+Txz7UIMgw
CQoGuAucCO5ToBbs2CbT0V5yxY6G5VO6Qd8g0PzDW4M6GsY/Xr5QCnyJe0jTW0d6
Dcc7UZFAzGNzyQCxHCic9xwTO+ZcJPJlH5TwknunxOb9xwCx4Qs=
=zN41
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,virtio: fixes
Several fixes. From now on, regression fixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmLgQr8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpGUUIAKtNhrnKopGm4LlRpx8zN3Jc1Jo0nb648gaM
# Oyi+Pl8+hpESUhaWN10XDk38/QuPQfIFeR2ZhfYjFTRlZE+n3X9LVlwL8ejjP8KH
# AcWm78Ff/SLA45aMKMmw74pvEDNsoPYTp7TrfeIej5ub8BIXr8+8pqDdIR9WwtWO
# PbhLNXkTT2yLEs6jCVT4/dyh7zivSkrY7G/RVmtUaFe3PgY8fdW2z3+Txz7UIMgw
# CQoGuAucCO5ToBbs2CbT0V5yxY6G5VO6Qd8g0PzDW4M6GsY/Xr5QCnyJe0jTW0d6
# Dcc7UZFAzGNzyQCxHCic9xwTO+ZcJPJlH5TwknunxOb9xwCx4Qs=
# =zN41
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Jul 2022 12:38:39 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
hw/virtio/virtio-iommu: Enforce power-of-two notify for both MAP and UNMAP
i386/pc: restrict AMD only enforcing of 1Tb hole to new machine type
i386/pc: relocate 4g start to 1T where applicable
i386/pc: bounds check phys-bits against max used GPA
i386/pc: factor out device_memory base/size to helper
i386/pc: handle unitialized mr in pc_get_cxl_range_end()
i386/pc: factor out cxl range start to helper
i386/pc: factor out cxl range end to helper
i386/pc: factor out above-4g end to an helper
i386/pc: pass pci_hole64_size to pc_memory_init()
i386/pc: create pci-host qdev prior to pc_memory_init()
hw/i386: add 4g boundary start to X86MachineState
hw/cxl: Fix size of constant in interleave granularity function.
hw/i386/pc: Always place CXL Memory Regions after device_memory
hw/machine: Clear out left over CXL related pointer from move of state handling to machines.
acpi/nvdimm: Define trace events for NVDIMM and substitute nvdimm_debug()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we only enforce power-of-two mappings (required by the QEMU
notifier) for UNMAP requests. A MAP request not aligned on a
power-of-two may be successfully handled by VFIO, and then the
corresponding UNMAP notify will fail because it will attempt to split
that mapping. Ensure MAP and UNMAP notifications are consistent.
Fixes: dde3f08b5c ("virtio-iommu: Handle non power of 2 range invalidations")
Reported-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220718135636.338264-1-jean-philippe@linaro.org>
Tested-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Test an allocating write to a parallels image that has a backing node.
Before HEAD^, doing so used to give me a failed assertion (when the
backing node contains only `42` bytes; the results varies with the value
chosen, for `0` bytes, for example, all I get is EIO).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220714132801.72464-3-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Commit a4072543cc has changed the I/O here
from working on a local one-element I/O vector to just using the buffer
directly (using the bdrv_co_pread()/bdrv_co_pwrite() helper functions
introduced shortly before).
However, it only changed the bdrv_co_preadv() call to bdrv_co_pread() -
the subsequent bdrv_co_pwritev() call stayed this way, and so still
expects a QEMUIOVector pointer instead of a plain buffer. We must
change that to be a bdrv_co_pwrite() call.
Fixes: a4072543cc ("block/parallels: use buffer-based io")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220714132801.72464-2-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
The added enforcing is only relevant in the case of AMD where the
range right before the 1TB is restricted and cannot be DMA mapped
by the kernel consequently leading to IOMMU INVALID_DEVICE_REQUEST
or possibly other kinds of IOMMU events in the AMD IOMMU.
Although, there's a case where it may make sense to disable the
IOVA relocation/validation when migrating from a
non-amd-1tb-aware qemu to one that supports it.
Relocating RAM regions to after the 1Tb hole has consequences for
guest ABI because we are changing the memory mapping, so make
sure that only new machine enforce but not older ones.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-12-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is assumed that the whole GPA space is available to be DMA
addressable, within a given address space limit, except for a
tiny region before the 4G. Since Linux v5.4, VFIO validates
whether the selected GPA is indeed valid i.e. not reserved by
IOMMU on behalf of some specific devices or platform-defined
restrictions, and thus failing the ioctl(VFIO_DMA_MAP) with
-EINVAL.
AMD systems with an IOMMU are examples of such platforms and
particularly may only have these ranges as allowed:
0000000000000000 - 00000000fedfffff (0 .. 3.982G)
00000000fef00000 - 000000fcffffffff (3.983G .. 1011.9G)
0000010000000000 - ffffffffffffffff (1Tb .. 16Pb[*])
We already account for the 4G hole, albeit if the guest is big
enough we will fail to allocate a guest with >1010G due to the
~12G hole at the 1Tb boundary, reserved for HyperTransport (HT).
[*] there is another reserved region unrelated to HT that exists
in the 256T boundary in Fam 17h according to Errata #1286,
documeted also in "Open-Source Register Reference for AMD Family
17h Processors (PUB)"
When creating the region above 4G, take into account that on AMD
platforms the HyperTransport range is reserved and hence it
cannot be used either as GPAs. On those cases rather than
establishing the start of ram-above-4g to be 4G, relocate instead
to 1Tb. See AMD IOMMU spec, section 2.1.2 "IOMMU Logical
Topology", for more information on the underlying restriction of
IOVAs.
After accounting for the 1Tb hole on AMD hosts, mtree should
look like:
0000000000000000-000000007fffffff (prio 0, i/o):
alias ram-below-4g @pc.ram 0000000000000000-000000007fffffff
0000010000000000-000001ff7fffffff (prio 0, i/o):
alias ram-above-4g @pc.ram 0000000080000000-000000ffffffffff
If the relocation is done or the address space covers it, we
also add the the reserved HT e820 range as reserved.
Default phys-bits on Qemu is TCG_PHYS_ADDR_BITS (40) which is enough
to address 1Tb (0xff ffff ffff). On AMD platforms, if a
ram-above-4g relocation is attempted and the CPU wasn't configured
with a big enough phys-bits, an error message will be printed
due to the maxphysaddr vs maxusedaddr check previously added.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-11-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Calculate max *used* GPA against the CPU maximum possible address
and error out if the former surprasses the latter. This ensures
max used GPA is reacheable by configured phys-bits. Default phys-bits
on Qemu is TCG_PHYS_ADDR_BITS (40) which is enough for the CPU to
address 1Tb (0xff ffff ffff) or 1010G (0xfc ffff ffff) in AMD hosts
with IOMMU.
This is preparation for AMD guests with >1010G, where it will want relocate
ram-above-4g to be after 1Tb instead of 4G.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-10-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move obtaining hole64_start from device_memory memory region base/size
into an helper alongside correspondent getters in pc_memory_init() when
the hotplug range is unitialized. While doing that remove the memory
region based logic from this newly added helper.
This is the final step that allows pc_pci_hole64_start() to be callable
at the beginning of pc_memory_init() before any memory regions are
initialized.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-9-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove pc_get_cxl_range_end() dependency on the CXL memory region,
and replace with one that does not require the CXL host_mr to determine
the start of CXL start.
This in preparation to allow pc_pci_hole64_start() to be called early
in pc_memory_init(), handle CXL memory region end when its underlying
memory region isn't yet initialized.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Message-Id: <20220719170014.27028-8-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Factor out the calculation of the base address of the memory region.
It will be used later on for the cxl range end counterpart calculation
and as well in pc_memory_init() CXL memory region initialization, thus
avoiding duplication.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-7-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move calculation of CXL memory region end to separate helper.
This is in preparation to a future change that removes CXL range
dependency on the CXL memory region, with the goal of allowing
pc_pci_hole64_start() to be called before any memory region are
initialized.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-6-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There's a couple of places that seem to duplicate this calculation
of RAM size above the 4G boundary. Move all those to a helper function.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-5-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the pre-initialized pci-host qdev and fetch the
pci-hole64-size into pc_memory_init() newly added argument.
Use PCI_HOST_PROP_PCI_HOLE64_SIZE pci-host property for
fetching pci-hole64-size.
This is in preparation to determine that host-phys-bits are
enough and for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-4-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the start of pc_memory_init() we usually pass a range of
0..UINT64_MAX as pci_memory, when really its 2G (i440fx) or
32G (q35). To get the real user value, we need to get pci-host
passed property for default pci_hole64_size. Thus to get that,
create the qdev prior to memory init to better make estimations
on max used/phys addr.
This is in preparation to determine that host-phys-bits are
enough and also for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-3-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than hardcoding the 4G boundary everywhere, introduce a
X86MachineState field @above_4g_mem_start and use it
accordingly.
This is in preparation for relocating ram-above-4g to be
dynamically start at 1T on AMD platforms.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-2-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst the interleave granularity is always small enough that this isn't
a real problem (much less than 4GiB) let's change the constant
to ULL to fix the coverity warning.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 829de299d1 ("hw/cxl/component: Add utils for interleave parameter encoding/decoding")
Fixes: Coverity CID 1488868
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220701132300.2264-4-Jonathan.Cameron@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously broken_reserved_end was taken into account, but Igor Mammedov
identified that this could lead to a clash between potential RAM being
mapped in the region and CXL usage. Hence always add the size of the
device_memory memory region. This only affects the case where the
broken_reserved_end flag was set.
Fixes: 6e4e3ae936 ("hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)")
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220701132300.2264-3-Jonathan.Cameron@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This got left behind in the move of the CXL setup code from core
files to the machines that support it.
Link: 1ebf9001fb
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220701132300.2264-2-Jonathan.Cameron@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20220704085852.330005-1-robert.hu@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes the dedicated framebuffer mailbox interface by
removing an unneeded offset. This means that we pick the framebuffer
address in the same way that we do if the guest code uses the buffer
allocate mechanism of the bcm2835_property interface (case
0x00040001: /* Allocate buffer */ in bcm2835_property.c).
The documentation of this mailbox interface doesn't say anything
about using parts of the request buffer address to affect the
chosen framebuffer address:
https://github.com/raspberrypi/firmware/wiki/Mailbox-framebuffer-interface
Some baremetal applications like the Screen01/Screen02 examples from
Baking Pi tutorial[1] didn't work before this patch.
[1] https://www.cl.cam.ac.uk/projects/raspberrypi/tutorials/os/screen01.html
Signed-off-by: Alan Jian <alanjian85@outlook.com>
Message-id: 20220725145838.8412-1-alanjian85@outlook.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The '==' operator to test is a bashism; the standard way to copmare
strings is '='. This causes dash to complain:
../../configure: 681: test: linux: unexpected operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-6-peter.maydell@linaro.org
In commit 823eb01345 we moved the setting of ARCH from configure
to meson.build, but we accidentally left behind one attempt to use
$ARCH in configure, which was trying to add -msmall-data to the
compiler flags on Alpha hosts. Since ARCH is now never set, the test
always fails and we never add the flag.
There isn't actually any need to use this compiler flag on Alpha:
the original intent was that it would allow us to simplify our TCG
codegen on that platform, but we never actually made the TCG changes
that would rely on -msmall-data.
Drop the effectively-dead code from configure, as we don't need it.
This was spotted by shellcheck:
In ./configure line 2254:
case "$ARCH" in
^---^ SC2153: Possible misspelling: ARCH may not be assigned, but arch is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-5-peter.maydell@linaro.org
The variable string-replacement syntax ${var/old/new} is a bashism
(though it is also supported by some other shells), and for instance
does not work with the NetBSD /bin/sh, which complains:
../src/configure: 687: Syntax error: Bad substitution
Replace it with a more portable sed-based approach, similar to
what we already do in quote_sh().
Note that shellcheck also diagnoses this:
In ./configure line 687:
e=${e/'\'/'\\'}
^-----------^ SC2039: In POSIX sh, string replacement is undefined.
^-- SC1003: Want to escape a single quote? echo 'This is how it'\''s done'.
^-- SC1003: Want to escape a single quote? echo 'This is how it'\''s done'.
In ./configure line 688:
e=${e/\"/'\"'}
^----------^ SC2039: In POSIX sh, string replacement is undefined.
Fixes: 8154f5e64b ("meson: Prefix each element of firmware path")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-4-peter.maydell@linaro.org
In shell script syntax, $var[something] is not special for variable
expansion: $var is expanded. However, as it can look as if it were
intended to be an array element access (the correct syntax for which
is ${var[something]}), shellcheck recommends using explicit braces
around ${var} to clarify the intended expansion.
This fixes the warning:
In ./configure line 2346:
if "$target_ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
^-- SC1087: Use braces when expanding arrays, e.g. ${array[idx]} (or ${var}[.. to quiet).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-3-peter.maydell@linaro.org
In commit 7d7dbf9dc1 we added a line to the configure script
which is not valid POSIX shell syntax, because it is missing a space
after a '!' character. shellcheck diagnoses this:
if !(GIT="$git" "$source_path/scripts/git-submodule.sh" "$git_submodules_action" "$git_submodules"); then
^-- SC1035: You are missing a required space after the !.
and the OpenBSD shell will not correctly handle this without the space.
Fixes: 7d7dbf9dc1 ("configure: replace --enable/disable-git-update with --with-git-submodules")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20220720152631.450903-2-peter.maydell@linaro.org
In commit 7390e0e9ab, we added support for SME loads and stores.
Unlike SVE loads and stores, these include handling of 128-bit
elements. The SME load/store functions call down into the existing
sve_cont_ldst_elements() function, which uses the element size MO_*
value as an index into the pred_esz_masks[] array. Because this code
path now has to handle MO_128, we need to add an extra element to the
array.
This bug was spotted by Coverity because it meant we were reading off
the end of the array.
Resolves: Coverity CID 1490539, 1490541, 1490543, 1490544, 1490545,
1490546, 1490548, 1490549, 1490550, 1490551, 1490555, 1490557,
1490558, 1490560, 1490561, 1490563
Fixes: 7390e0e9ab ("target/arm: Implement SME LD1, ST1")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220718100144.3248052-1-peter.maydell@linaro.org
Update the regex for the slirp component now that it lives
solely inside /slirp/, and note that it should be ignored in
Coverity analysis (because it's a separate upstream project
now, and they run Coverity on it themselves).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220718142310.16013-3-peter.maydell@linaro.org
Alex Bennée