This improves error reports for bochs, cow, qcow, qcow2, qed and vmdk
when a file with the wrong format is selected.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block drivers need a special error code for "wrong format".
From the available error codes EMEDIUMTYPE fits best.
It is not available on all platforms, so a definition in
qemu-common.h and a specific error report are needed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Yet another optimization is to extend the mirroring iteration to include more
adjacent dirty blocks. This limits the number of I/O operations and makes
mirroring efficient even with a small granularity. Most of the infrastructure
is already in place; we only need to put a loop around the computation of
the origin and sector count of the iteration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With AIO support in place, we can start copying more than one chunk
in parallel. This patch introduces the required infrastructure for
this: the buffer is split into multiple granularity-sized chunks,
and there is a free list to access them.
Because of copy-on-write, a single operation may already require
multiple chunks to be available on the free list.
In addition, two different iterations on the HBitmap may want to
copy the same cluster. We avoid this by keeping a bitmap of in-flight
I/O operations, and blocking until the previous iteration completes.
This should be a pretty rare occurrence, though; as long as there is
no overlap the next iteration can start before the previous one finishes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes sense when the next commit starts using the extra buffer space
to perform many I/O operations asynchronously.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is really no change in the behavior of the job here, since
there is still a maximum of one in-flight I/O operation between
the source and the target. However, this patch already introduces
the AIO callbacks (which are unmodified in the next patch)
and some of the logic to count in-flight operations and only
complete the job when there is none.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The desired granularity may be very different depending on the kind of
operation (e.g. continuous replication vs. collapse-to-raw) and whether
the VM is expected to perform lots of I/O while mirroring is in progress.
Allow the user to customize it, while providing a sane default so that
in general there will be no extra allocated space in the target compared
to the source.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring runs, the backing files for the target may not yet be
ready. However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros. Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying). So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.
However, we want to lower the granularity for efficiency, so we need
a better solution. The solution is to always copy a whole cluster the
first time it is touched. The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is needed in the following patch.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.
Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
HBitmaps provides an array of bits. The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.
In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level. When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).
Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):
bits 0-57 => word in the last bitmap | bits 58-63 => bit in the word
bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word
So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits. To move down, you shift the index left
similarly, and add the word index within the group. Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.
Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.
When iterating on a bitmap, each bit (on any level) is only visited
once. Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps. Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can provide fast versions based on the other functions defined
by host-utils.h. Some care is required on glibc, which provides
ffsl already.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Paolo Bonzini (1) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
iscsi: add support for iovectors
iscsi: do not leak acb->buf when commands are aborted
This reverts commit 67c5322d7000fd105a926eec44bc1765b7d70bdd:
I'm not sure if the retry logic has ever worked when not using FIFO mode. I
found this while writing a test case although code inspection confirms it is
definitely broken.
The TSR retry logic will never actually happen because it is guarded by an
'if (s->tsr_rety > 0)' but this is the only place that can ever make the
variable greater than zero. That effectively makes the retry logic an 'if (0)
I believe this is a typo and the intention was >= 0. Once this is fixed thoug
I see double transmits with my test case. This is because in the non FIFO
case, serial_xmit may get invoked while LSR.THRE is still high because the
character was processed but the retransmit timer was still active.
We can handle this by simply checking for LSR.THRE and returning early. It's
possible that the FIFO paths also need some attention.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Even if the previous logic was never worked, new logic breaks stuff -
namely,
qemu -enable-kvm -nographic -kernel /boot/vmlinuz-$(uname -r) -append console=ttyS0 -serial pty
the above command will cause the virtual machine to stuck at startup
using 100% CPU till one connects to the pty and sends any char to it.
Note this is rather typical invocation for various headless virtual
machines by libvirt.
So revert this change for now, till a better solution will be found.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for directly passing the iovec
array from QEMUIOVector if libiscsi supports it (1.8.0
or newer).
Signed-off-by: Peter Lieven <pl@kamp.de>
[Preserve the improvements from commit 4cc841b, iscsi: partly
avoid iovec linearization in iscsi_aio_writev, 2012-11-19 - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
acb->buf is freed in the WRITE(16) callback, but this may not
get called at all when commands are aborted. Add another
free in the ABORT TASK callback, which requires setting acb->buf
to NULL everywhere.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's __VA_ARGS__. Fixes the build with CRIS_[OP_]HELPER_DEBUG defined.
Broken since r6338 / 93fcfe39a0 (Convert
references to logfile/loglevel to use qemu_log*() macros).
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This is a trivial patch to harmonize the coding style on
hw/etraxfs_eth.c. This is in preparation to split off the bitbang mdio
code into a separate file.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paul Brook <paul@codesourcery.com>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi: Drop useless null test in scsi_unit_attention()
lsi: use qbus_reset_all to reset SCSI bus
scsi: fix segfault with 0-byte disk
iscsi: add support for iSCSI NOPs [v2]
iscsi: partly avoid iovec linearization in iscsi_aio_writev
iscsi: add iscsi_create support
req was created by scsi_req_alloc(), which initializes req->dev to a
value it dereferences. req->dev isn't changed anywhere else.
Therefore, req->dev can't be null.
Drop the useless null test; it spooks Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a 0-sized disk is found, READ CAPACITY will return a
LUN NOT READY error. However, because it returns -1 instead
of zero, the HBA will call scsi_req_continue. This will
typically cause a segmentation fault or an assertion failure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target.
If a consecutive number of NOP-In replies fail a reconnect is initiated.
iSCSI NOPs help to ensure that the connection to the target is still operational.
This should not, but in reality may be the case even if the TCP connection is still
alive if there are bugs in either the target or the initiator implementation.
v2:
- track the NOPs inside libiscsi so libiscsi can reset the counter
in case it initiates a reconnect.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libiscsi expects all write16 data in a linear buffer. If the
iovec only contains one buffer we can skip the linearization
step as well as the additional malloc/free and pass the
buffer directly.
Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support for bdrv_create. This allows e.g.
to use qemu-img to convert from any supported device to
an iscsi backed storage as destination.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Basically the same as usb-storage, but without automatic scsi
device setup. Also features support for up to 16 LUNs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a simpler solution to 869981, where migration breaks since qxl's
rom bar size has changed. Instead of ignoring fields in QXLRom, which is what has
actually changed, we remove some of the modes, a mechanism already
accounted for by the guest. The modes left allow for portrait and
landscape only modes, corresponding to orientations 0 and 1.
Orientations 2 and 3 are dropped.
Added assert so that rom size will fit the future QXLRom increases via
spice-protocol changes.
This patch has been tested with 6.1.0.10015. With the newer 6.1.0.10016
there are problems with both "(flipped)" modes prior to the patch, and
the patch loses the ability to set "Portrait" modes. But this is a
separate bug to be fixed in the driver, and besides the patch doesn't
affect the new arbitrary mode setting functionality.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit a1cbfd554e.
Test isn't useless. scsi_req_enqueue() may finish the request (will
actually happen for requests which don't trigger any I/O such as
INQUIRY), then call usb_msd_command_complete() which in turn will
set s->req to NULL after unref'ing it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.
Resolve a Coding Style warning in openpic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some VncState values are not initialized before the Websocket handshake.
If it fails QEMU segfaults during the cleanup. To prevent this behavior
intialization checks are added.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support
to QEMU VNC. Binary encoding support on the client side is mandatory.
Because of the GnuTLS requirement the Websockets implementation is
optional (--enable-vnc-ws).
To activate Websocket support the VNC option "websocket"is used, for
example "-vnc :0,websocket".
The listen port for Websocket connections is (5700 + display) so if
QEMU VNC is started with :0 the Websocket port would be 5700.
As an alternative the Websocket port could be manually specified by
using ",websocket=<port>" instead.
Parts of the implementation base on Anthony Liguori's QEMU Websocket
patch from 2010 and on Joel Martin's LibVNC Websocket implementation.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Following Anthony Liguori's Websocket implementation I have added the
buffer_advance function to VNC and replaced all related buffer memmove
operations with it.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A virtio-s390-bus is created during the init. So one VirtIODevice can be
connected on the virtio-s390-device through this bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This add the virtio-s390-bus which extends virtio-bus. So one VirtIODevice can
be connected on this bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create the virtio-pci device which is abstract. This transport device will
create a virtio-pci-bus, so one VirtIODevice can be connected.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce virtio-pci-bus, which extends virtio-bus. It is used with virtio-pci
transport device.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create the virtio-device which is abstract. All the virtio-device can extend
this class. It also add some functions to virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce virtio-bus. Refactored transport device will create a bus which
extends virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a max_dev field to BusClass to specify the maximum amount of devices allowed
on the bus (has no effect if max_dev=0)
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Juan Quintela (7) and Paolo Bonzini (6)
# Via Juan Quintela
* quintela/thread.next:
migration: remove argument to qemu_savevm_state_cancel
migration: Only go to the iterate stage if there is anything to send
migration: unfold rest of migrate_fd_put_ready() into thread
migration: move exit condition to migration thread
migration: Add buffered_flush error handling
migration: move beginning stage to the migration thread
qemu-file: Only set last_error if it is not already set
migration: fix off-by-one in buffered_rate_limit
migration: remove double call to migrate_fd_close
migration: make function static
use XFER_LIMIT_RATIO consistently
Protect migration_bitmap_sync() with the ramlist lock
Unlock ramlist lock also in error case
# By Stefan Weil (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
hw/tpci200: Fix compiler warning (redefined symbol with MinGW)
configure: silence pkg-config's check for curses
acpitable: open the data file in binary mode
hw: Spelling fix in log message
Stefan Weil