When entering vga mode the display size likely changes,
notify all displaychangelisteners about this.
Probably went unnoticed for a while as one if the first
things the guest does after leaving qxl native mode and
entering qxl vga mode is to set the vga video mode. But
there is still a small window where qemu can operate on
stale data, leading to crashes now and then.
https://bugzilla.redhat.com/show_bug.cgi?id=865767
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Due to usage of pixman for rendering on all spice surfaces we have
pixman's requirement that the stride be word aligned. A guest not
honoring that can crash spice and qemu with it due to failure to create
a surface (in spice-server). Avoid this early on in primary surface
creation and offscreen surface creation.
Recently windows guests got odd width support which triggers a non word
aligned primary surface in 16bit color depth. Off screen surfaces have
always been word aligned, but doesn't hurt to check them here too.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix build on a 32 bit host:
CC mips-softmmu/target-mips/dsp_helper.o
/src/qemu/target-mips/dsp_helper.c: In function 'helper_dextr_rs_w':
/src/qemu/target-mips/dsp_helper.c:3556: error: integer constant is too large for 'long' type
/src/qemu/target-mips/dsp_helper.c: In function 'helper_extr_s_h':
/src/qemu/target-mips/dsp_helper.c:3656: error: integer constant is too large for 'long' type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Postpone stopping the dirty log to the point where the command fifo is
configured to allow drivers which don't use the fifo to work too.
(Without this the picture rendered into the vram never got to the
screen and the DIRECT_VRAM option meant to support this case was
removed a year ago.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to the documentation drivers using this device should read
FB_SIZE before enabling the device to know what memory to map. This
would not work if we return 0 before enabled. The docs also mention
reading SVGA_REG_DEPTH but not writing it. (Only SVGA_REG_BITS_PER_PIXEL
can be written but we don't really support that either.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Removed info from vmsvga_state that is available from elsewhere and
thus was duplicated here unnecessarily.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
pc: Drop redundant test for ROM memory region
exec: make some functions static
target-ppc: make some functions static
ppc: add missing static
vnc: add missing static
vl.c: add missing static
target-sparc: make do_unaligned_access static
m68k: Return semihosting errno values correctly
cadence_uart: More debug information
Conflicts:
target-m68k/m68k-semi.c
Add optimized TCG qemu_ld/st generation which locates the code of TLB miss
cases at the end of a block after generating the other IRs.
Currently, this optimization supports only i386 and x86_64 hosts.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add GETPC_EXT which is used by MMU helpers to selectively calculate the code
address of accessing guest memory when called from a qemu_ld/st optimized code
or a C function. Currently, it supports only i386 and x86-64 hosts.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Enable CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization only when
a host is i386 or x86_64.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Abstract out the use of put_user for returning semihosting call results,
so that we can log when a guest erroneously attempts a semihosting call
with an unwritable argument block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Handle failure of get_user accessing the semihosting
argument block, rather than simply ignoring the failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fixing a simple typo, s/errno/err/, that caused
the error status from GDB semihosted system calls
to be returned incorrectly.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit ac4119c (chardev: Use timer instead of bottom-half to postpone
open event, 2012-10-12) moved the alarm timer initialization to an earlier
point but failed to consider that it depends on qemu_init_main_loop.
Later, commit 1c53786 (vl: init main loop earlier, 2012-10-30) fixed
this, but left -daemonize in two different ways. First, timers need to
be reinitialized after forking. Second, the global mutex was being held
by the parent, and thus dropped after forking.
The first is now fixed using pthread_atfork. For the second part,
make sure that the global mutex is not taken before daemonization,
and similarly delay qemu_thread_self.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
init_timer_alarm was being called twice. This is not needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Timers are not inherited by the child of a fork(2), so just use
pthread_atfork to reinstate them after daemonize.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
OpenBSD and Darwin do not have sem_timedwait. Implement a fallback
for them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Weakrefs only tell you if the symbol was defined elsewhere, so you
need a further check at runtime to pick the default definition
when needed.
This could be automated by the compiler, but it does not do it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/migr-coroutine:
migration: move process_incoming_migration to a coroutine
migration: handle EAGAIN while reading QEMUFile
migration: move qemu_fclose to process_incoming_migration
migration: close socket QEMUFile from socket_close
migration: xxx_close will only be called once
migration: use closesocket, not close
migration: use migrate_fd_close in migrate_fd_cleanup
migration: clean up server sockets and handlers before invoking process_incoming_migration
migration: replace qemu_stdio_fd with qemu_get_fd
migration: add qemu_get_fd
migration: consolidate QEMUFile methods in a single QEMUFileOps struct
migration: unify stdio-based QEMUFile operations
The final part of incoming migration, which now consists of
process_incoming_migration for all protocols, is thus made non-blocking.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will never happen right now (the assertion would fail). The
next patch will set the socket or pipe in non-blocking mode, thus
enabling this part of the code.
Coroutines can just stop whenever they want with qemu_coroutine_yield.
As soon as select tells the main loop that the migration stream is
readable, the coroutine is re-entered directly in qemu_get_buffer,
where it will read more data and pass it to the loading routines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The common suffix is now just process_incoming_migration.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The common suffix now is process_incoming_migration+qemu_fclose.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to test s->fd again, it is tested in the caller.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows requires this. Migration does not quite work under Windows
but let's be uniform across QEMU.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
migrate_fd_cleanup will usually close the file descriptor via
buffered_file_close's call to migrate_fd_close. However, in the case
of s->file == NULL it is "inlining" migrate_fd_close (almost: there is a
direct close() instead of using s->close(s)). To fix the inconsistency
and clean up the code, allow multiple calls to migrate_fd_close and use
the function in migrate_fd_cleanup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A first step towards making a common "suffix" for all migration protocols,
and moving it to process_incoming_migration.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that qemu_fseek does not exist anymore, there is no reason to do
an fseek before fread/fwrite when operating on an stdio file.
Thus, unify the get/put_buffer callbacks used by qemu_fopen
with those used for pipes.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the following:
target-i386/cpu.o: In function `kvm_cpu_fill_host':
target-i386/cpu.c:783: undefined reference to `kvm_state'
I didn't notice the problem before because GCC was optimizing the entire
kvm_cpu_fill_host() function out (because all calls are conditional on
kvm_enabled()).
* cpu_x86_fill_model_id() is used only if CONFIG_KVM is set, so #ifdef it
entirely to avoid compiler warnings.
* kvm_cpu_fill_host() should be called only if KVM is enabled, so
use #ifdef CONFIG_KVM around the entire function body.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit a93a4a2 changed the names of some fields in DisplayChangeListener
and broke compilation of the cocoa UI. Update to the new names.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Console cleanup series renamed dpy_resize and dpy_update all over the
tree, but hw/xenfb.c was forgotten. Update it too so it builds again.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/usb.69: (31 commits)
usb-redir: Allow redirecting super speed devices to high speed controllers
usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
usb-redir: Use reject rather the disconnect on bad ep info
usb-redir: Add an usbredir_setup_usb_eps() helper function
usb-redir: Add support for input pipelining
usb-redir: Add support for 32 bits bulk packet length
combined-packet: Add a workaround for Linux usbfs + live migration
usb: Add packet combining functions
uhci: Don't crash on device disconnect
uhci: Add a uhci_handle_td_error() helper function
usb/ehci-pci: add helper to create ich9 usb controllers
usb/ehci-pci: add ich9 00:1a.* variant
usb/ehci-pci: dynamic type generation
uhci: add ich9 00:1a.* variants
uhci: stick irq routing info into UHCIInfo too.
uhci: dynamic type generation
xilinx_zynq: add USB controllers
usb/ehci: add sysbus variant
usb/ehci: split into multiple source files
usb/ehci: Guard definition of EHCI_DEBUG
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just a few lines above, we already initialize rom_memory accordingly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gerd Hoffmann