Just add 1 to the effective privledge level when in HS mode, then reuse
the check of 'effective_priv < csr_priv' in riscv_csrrw_check to replace
the privilege level related check in hmode. Then, hmode will only check
whether H extension is supported.
When accessing Hypervior CSRs:
1) If accessing from M privilege level, the check of
'effective_priv< csr_priv' passes, returns hmode(...) which will return
RISCV_EXCP_ILLEGAL_INST when H extension is not supported and return
RISCV_EXCP_NONE otherwise.
2) If accessing from HS privilege level, effective_priv will add 1,
the check passes and also returns hmode(...) too.
3) If accessing from VS/VU privilege level, the check fails, and
returns RISCV_EXCP_VIRT_INSTRUCTION_FAULT
4) If accessing from U privilege level, the check fails, and returns
RISCV_EXCP_ILLEGAL_INST
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add check for the implicit dependence between H and S
Csrs only existed in RV32 will not trigger virtual instruction fault
when not in RV32 based on section 8.6.1 of riscv-privileged spec
(draft-20220717)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220718130955.11899-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add umode/umode32 predicate for mcounteren, menvcfg/menvcfgh
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix the lines with over 80 characters
Fix the lines which are obviously misalgined with other lines in the
same group
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add check for "H depends on an I base integer ISA with 32 x registers"
which is stated at the beginning of chapter 8 of the riscv-privileged
spec(draft-20220717)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 3 suggested privilege mode combinations listed in section 1.2
of the riscv-privileged spec(draft-20220717):
1) M, 2) M, U 3) M, S, U
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220613115810.178210-1-Jason@zx2c4.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Zmmul is ratified and is now version 1.0
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220710101546.3907-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For rv128c shifts, a shamt of 0 is a shamt of 64, while for rv32c/rv64c
it stays 0 and is a hint instruction that does not change processor state.
For rv128c right shifts, the 6-bit shamt is in addition sign extended to
7 bits.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220710110451.245567-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should disable extensions in riscv_cpu_realize() if minimum required
priv spec version is not satisfied. This also ensures that machines with
priv spec v1.11 (or lower) cannot enable H, V, and various multi-letter
extensions.
Fixes: a775398be2 ("target/riscv: Add isa extenstion strings to the device tree")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Message-Id: <20220630061150.905174-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should write transformed instruction encoding of the trapped
instruction in [m|h]tinst CSR at time of taking trap as defined
by the RISC-V privileged specification v1.12.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: dramforever <dramforever@live.com>
Message-Id: <20220630061150.905174-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix s390x, i386 and riscv for translations crossing a page.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmMW8TcdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8qfwf9EYjXywES/UYzfeJC
7irryE3iYddWP+ix3Q4WKaTc61plwP5MMCmeq4PjRo1IBAL5dTtUE1+AFXkEvm4L
EckSiT5D5d/wYOfhWSWxjblmMk7GUXRRgKzkF1ir3soIftQgXdb43PwAswuOca/v
dX7wXBJOoWmGWqXNNlQmGIl7c4uQTkOM6iTTLlm4Qg7SJC4MA6EiSZmXlvAs80lN
TCbBV5P89qseHwzhJUTMZEO+ZMAuTSjFSd/RqBexVa4ty5UJxxgBk21A8JtQPUhr
Y/Ezb0yhOcwrdjJ8REc267BZbdNgbaVNlUd7c9GKbv8bQUh0AoM9gnjGdoID88x9
q0f+Pw==
=HmJB
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20220906' of https://gitlab.com/rth7680/qemu into staging
Respect PROT_EXEC in user-only mode.
Fix s390x, i386 and riscv for translations crossing a page.
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmMW8TcdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8qfwf9EYjXywES/UYzfeJC
# 7irryE3iYddWP+ix3Q4WKaTc61plwP5MMCmeq4PjRo1IBAL5dTtUE1+AFXkEvm4L
# EckSiT5D5d/wYOfhWSWxjblmMk7GUXRRgKzkF1ir3soIftQgXdb43PwAswuOca/v
# dX7wXBJOoWmGWqXNNlQmGIl7c4uQTkOM6iTTLlm4Qg7SJC4MA6EiSZmXlvAs80lN
# TCbBV5P89qseHwzhJUTMZEO+ZMAuTSjFSd/RqBexVa4ty5UJxxgBk21A8JtQPUhr
# Y/Ezb0yhOcwrdjJ8REc267BZbdNgbaVNlUd7c9GKbv8bQUh0AoM9gnjGdoID88x9
# q0f+Pw==
# =HmJB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Sep 2022 03:05:27 EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20220906' of https://gitlab.com/rth7680/qemu:
target/riscv: Make translator stop before the end of a page
target/riscv: Add MAX_INSN_LEN and insn_len
target/i386: Make translator stop before the end of a page
target/s390x: Make translator stop before the end of a page
accel/tcg: Add fast path for translator_ld*
accel/tcg: Add pc and host_pc params to gen_intermediate_code
accel/tcg: Remove translator_ldsw
accel/tcg: Document the faulting lookup in tb_lookup_cmp
accel/tcg: Use probe_access_internal for softmmu get_page_addr_code_hostp
accel/tcg: Move qemu_ram_addr_from_host_nofail to physmem.c
accel/tcg: Make tb_htable_lookup static
accel/tcg: Unlock mmap_lock after longjmp
accel/tcg: Properly implement get_page_addr_code for user-only
accel/tcg: Introduce is_same_page()
tests/tcg/i386: Move smc_code2 to an executable section
linux-user: Clear translations on mprotect()
linux-user: Honor PT_GNU_STACK
linux-user/x86_64: Allocate vsyscall page as a commpage
linux-user/hppa: Allocate page zero as a commpage
linux-user/arm: Mark the commpage executable
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Right now the translator stops right *after* the end of a page, which
breaks reporting of fault locations when the last instruction of a
multi-insn translation block crosses a page boundary.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1155
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These will be useful in properly ending the TB.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Right now translator stops right *after* the end of a page, which
breaks reporting of fault locations when the last instruction of a
multi-insn translation block crosses a page boundary.
An implementation, like the one arm and s390x have, would require an
i386 length disassembler, which is burdensome to maintain. Another
alternative would be to single-step at the end of a guest page, but
this may come with a performance impact.
Fix by snapshotting disassembly state and restoring it after we figure
out we crossed a page boundary. This includes rolling back cc_op
updates and emitted ops.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1143
Message-Id: <20220817150506.592862-4-iii@linux.ibm.com>
[rth: Simplify end-of-insn cross-page checks.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Right now translator stops right *after* the end of a page, which
breaks reporting of fault locations when the last instruction of a
multi-insn translation block crosses a page boundary.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220817150506.592862-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cache the translation from guest to host address, so we may
use direct loads when we hit on the primary translation page.
Look up the second translation page only once, during translation.
This obviates another lookup of the second page within tb_gen_code
after translation.
Fixes a bug in that plugin_insn_append should be passed the bytes
in the original memory order, not bswapped by pieces.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only user can easily use translator_lduw and
adjust the type to signed during the return.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It was non-obvious to me why we can raise an exception in
the middle of a comparison function, but it works.
While nearby, use TARGET_PAGE_ALIGN instead of open-coding.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the implementation of get_page_addr_code_hostp
by reusing the existing probe_access infrastructure.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The base qemu_ram_addr_from_host function is already in
softmmu/physmem.c; move the nofail version to be adjacent.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is not used outside of cpu-exec.c. Move it and
its subroutines up in the file, before the first use.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The mmap_lock is held around tb_gen_code. While the comment
is correct that the lock is dropped when tb_gen_code runs out
of memory, the lock is *not* dropped when an exception is
raised reading code for translation.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current implementation is a no-op, simply returning addr.
This is incorrect, because we ought to be checking the page
permissions for execution.
Make get_page_addr_code inline for both implementations.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a function that checks whether a given address is on the same
page as where disassembly started. Having it improves readability of
the following patches.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220811095534.241224-3-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Make the DisasContextBase parameter const.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to start validating PAGE_EXEC, which means
that we've got to put this code into a section that is
both writable and executable.
Note that this test did not run on hardware beforehand either.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently it's possible to execute pages that do not have PAGE_EXEC
if there is an existing translation block. Fix by invalidating TBs
that touch the affected pages.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220817150506.592862-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Map the stack executable if required by default or on demand.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to start validating PAGE_EXEC, which means that we've
got to mark the vsyscall page executable. We had been special
casing this entirely within translate.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to start validating PAGE_EXEC, which means that we've
got to mark page zero executable. We had been special casing this
entirely within translate.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to start validating PAGE_EXEC, which means
that we've got to mark the commpage executable. We had
been placing the commpage outside of reserved_va, which
was incorrect and lead to an abort.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Users have reported not to understand the documentation. This completes
it to give an explicit example how one is supposed to set up a virtual
braille USB device.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Updates to add the OpenRISC virt plaform to QEMU. Highlights
include:
- New virt plaform with, virtio and pci bus support
- OpenRISC support for MTTCG
- Goldfish RTC device endianness is configurable now
-----BEGIN PGP SIGNATURE-----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=BzgX
-----END PGP SIGNATURE-----
Merge tag 'pull-or1k-20220904' of https://github.com/stffrdhrn/qemu into staging
OpenRISC updates for 7.2.0
Updates to add the OpenRISC virt plaform to QEMU. Highlights
include:
- New virt plaform with, virtio and pci bus support
- OpenRISC support for MTTCG
- Goldfish RTC device endianness is configurable now
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmMURl4ACgkQw7McLV5m
# J+TAVg/6A1HFazEBDzyVvg5BWfusvPMv1gWyAXQVbZDdoEVP5ilJq3Xz2vlOWu+Q
# 46WHAncQH8KGWlS7x4Qk9X1tOU+9LCTa0aBqa1ARAle/wGKJeQ2QkmQM7lnAAtFt
# ON9pDOrj85cNVp7ly/rZqmOkYorUtSblKllOigPaxZozfSA2FuoYwc7vLxy/ICk0
# 6RbRUKiIvqvNxhT0q13buIiqhtQAOLC2/Rrlp/CqUm+nrNlSVQIMC57ddNoopUFN
# I6jb5UxyHtQSlWX6zsLjvho9hlZCuA9IIG7B4qS4/kyC7XJGmOICb3A7QSmfaUxy
# HtEsaImjjhCUnJs8fhDHqyYnUu6JcXMRv61hIr7GNK/g3enpBzG1Otu5jsyHgzEX
# SaachdFUibLJSj/+K4YOaT9luAc0Yvx9vArnXD+2wGg3kHTSDUNv2nFdyLyn5PNM
# sZ9gx6gTEFI7iaeHEZM/doKdlHubddA/GH4DLy2fwZN7EyIsbll9TDJ8icqu1UBT
# KpQdN55VeVqdOEvKUSXxsAK8aRtTjlEErKinufz1yyrg5Lw9XgH1xtTft+rJyXPu
# Lw0hMHYqeaWhNUgnli/ByTY7yd+wC/ukNFQLUlMiDte337Lx9H//MOVvyl6Y5ARE
# jIWt1JlTyuhj+txJrGZMvBrc2ZQ6fF/4HXc/xyGK7eJnEWZIzkY=
# =BzgX
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 04 Sep 2022 02:31:58 EDT
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'pull-or1k-20220904' of https://github.com/stffrdhrn/qemu:
docs/system: openrisc: Add OpenRISC documentation
hw/openrisc: virt: pass random seed to fdt
target/openrisc: Interrupt handling fixes
target/openrisc: Enable MTTCG
target/openrisc: Add interrupted CPU to log
hw/openrisc: Initialize timer time at startup
hw/openrisc: Add PCI bus support to virt
hw/openrisc: Add the OpenRISC virtual machine
goldfish_rtc: Add big-endian property
target/openrisc: Fix memory reading in debugger
hw/openrisc: Split re-usable boot time apis out to boot.c
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
When running SMP systems we sometimes were seeing lockups where
IPI interrupts were being raised by never handled.
This looks to be caused by 2 issues in the openrisc interrupt handling
logic.
1. After clearing an interrupt the openrisc_cpu_set_irq handler will
always clear PICSR. This is not correct as masked interrupts
should still be visible in PICSR.
2. After setting PICMR (mask register) and exposed interrupts should
cause an interrupt to be raised. This was not being done so add it.
This patch fixes both issues.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
This patch enables multithread TCG for OpenRISC. Since the or1k shared
syncrhonized timer can be updated from each vCPU via helpers we use a
mutex to synchronize updates.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
When we are tracing it's helpful to know which CPU's are getting
interrupted, add that detail to the log line.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The last_clk time was initialized at zero, this means when we calculate
the first delta we will calculate 0 vs current time which could cause
unnecessary hops.
This patch moves timer initialization to the cpu reset. There are two
resets registered here:
1. Per cpu timer mask (ttmr) reset.
2. Global cpu timer (last_clk and ttcr) reset, attached to the first
cpu only.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
This is mostly borrowed from xtensa and riscv as examples. The
create_pcie_irq_map swizzle function is almost and exact copy
but here we use a single cell interrupt, possibly we can make
this generic.
Signed-off-by: Stafford Horne <shorne@gmail.com>
This patch adds the OpenRISC virtual machine 'virt' for OpenRISC. This
platform allows for a convenient CI platform for toolchain, software
ports and the OpenRISC linux kernel port.
Much of this has been sourced from the m68k and riscv virt platforms.
The platform provides:
- OpenRISC SMP with up to 4 cpus
- A virtio bus with up to 8 devices
- Standard ns16550a serial
- Goldfish RTC
- SiFive TEST device for poweroff and reboot
- Generated Device Tree to automatically configure the guest kernel
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add a new property "big-endian" to allow configuring the RTC as either
little or big endian, the default is little endian.
Currently overriding the default to big endian is only used by the m68k
virt platform. New platforms should prefer to use little endian and not
set this.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
In commit f0655423ca ("target/openrisc: Reorg tlb lookup") data and
instruction TLB reads were combined. This, broke debugger reads where
we first tried to map using the data tlb then fall back to the
instruction tlb.
This patch replicates this logic by first requesting a PAGE_READ
protection mapping then falling back to PAGE_EXEC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
These will be shared with the virt platform.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Version: GnuPG v1
iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
=eMUT
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
# KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
# Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
# JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
# ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
# wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
# =eMUT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Sep 2022 02:30:35 EDT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [full]
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu: (21 commits)
net: tulip: Restrict DMA engine to memories
net/colo.c: Fix the pointer issue reported by Coverity.
vdpa: Delete CVQ migration blocker
vdpa: Add virtio-net mac address via CVQ at start
vhost_net: add NetClientState->load() callback
vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail
vdpa: Move command buffers map to start of net device
vdpa: add net_vhost_vdpa_cvq_info NetClientInfo
vhost_net: Add NetClientInfo stop callback
vhost_net: Add NetClientInfo start callback
vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush
vhost: Delete useless read memory barrier
vhost: use SVQ element ndescs instead of opaque data for desc validation
vhost: stop transfer elem ownership in vhost_handle_guest_kick
vdpa: Use ring hwaddr at vhost_vdpa_svq_unmap_ring
vhost: Always store new kick fd on vhost_svq_set_svq_kick_fd
vdpa: Make SVQ vring unmapping return void
vdpa: Remove SVQ vring from iova_tree at shutdown
util: accept iova_tree_remove_parameter by value
vdpa: do not save failed dma maps in SVQ iova tree
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If you specify a known backend but it isn't compiled in, or failed to
initialize, you get a simple warning and the "none" backend as a
fallback, and QEMU runs happily:
$ qemu-system-x86_64 -audiodev id=audio,driver=dsound
audio: Unknown audio driver `dsound'
audio: warning: Using timer based audio emulation
...
Instead, QEMU should fail to start:
$ qemu-system-x86_64 -audiodev id=audio,driver=dsound
audio: Unknown audio driver `dsound'
$
Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1983493
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220822131021.975656-1-marcandre.lureau@redhat.com>
Weiwei Li