The tlb data is stored within the CPU env. Therefore, the initialization
has to be done after we clear the environment. Otherwise the tlb will have
a valid entry for address 0x0.
Signed-off-by: Michael Walle <michael@walle.cc>
CPU models which have the LM32_FLAG_IGNORE_MSB flag set will shadow the
lower 2GB to the upper 2GB memory space. This will fix the debug memory
access used by qemu console and GDB to match this behaviour.
Signed-off-by: Michael Walle <michael@walle.cc>
Switch the few remaining ds_get_* uses in console.c over to the new
surface_* accessors.
While doing so tripped over a few leftovers from commit
a93a4a226a (code using depth == 0
as indicator for textmode rendering). Fixed them up.
Finally dropped ds_get_* helper helpers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that nobody depends on DisplayState in DisplayChangeListener
callbacks any more we can remove the parameter from all callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rework DisplayStateListener callbacks to not use the DisplayState
any more. Factor out the window size handling to a separate function,
so the zoom callbacks can call that directly instead of abusing the
gd_switch DisplayStateListener callback for that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add convinence wrappers to query DisplaySurface properties.
Simliar to ds_get_*, but operating in the DisplaySurface
not the DisplayState.
With this patch in place ui frontents can stop using DisplayState
in the rendering code paths, they can simply operate using the
DisplaySurface passed in via dpy_gfx_switch callback.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the dpy_gfx_resize and dpy_gfx_setdata DisplayChangeListener
callbacks with a dpy_gfx_switch callback which notifies the ui code
when the framebuffer backing storage changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Decouple DisplaySurface allocation & deallocation from DisplayState.
Replace dpy_gfx_resize + dpy_gfx_setdata with a dpy_gfx_replace_surface
function.
This handles the graphic hardware emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ask the vga core to update the display. Will trigger dpy_gfx_resize
if needed. More complete than just calling dpy_gfx_resize.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DisplayChangeListener is passed now to all DisplayChangeListenerOps
callbacks, so we can use that to access the qxl state and kill the
qxl0 global variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DisplayChangeListener is passed now to all DisplayChangeListenerOps
callbacks, so we can use that to access the spice display state and
kill the sdpy global variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's broken by design. There can be multiple DisplayChangeListener
instances, so they simply can't store state in the (single) DisplayState
struct. Try 'qemu -display gtk -vnc :0', watch it crash & burn.
With DisplayChangeListenerOps having a more sane interface now we can
simply use the DisplayChangeListener pointer to get access to our
private data instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 259186a7 "cpu: Move halted and interrupt_request fields to CPUState"
seems to have missed one instance in target-s390x/kvm.c:
/home/cohuck/git/qemu/target-s390x/kvm.c: In function ‘kvm_arch_process_async_events’:
/home/cohuck/git/qemu/target-s390x/kvm.c:319: error: ‘CPUS390XState’ has no member named ‘halted’
/home/cohuck/git/qemu/target-s390x/kvm.c:320: warning: control reaches end of non-void function
make[1]: *** [target-s390x/kvm.o] Error 1
Let's just switch to cs->halted.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
xilinx_spips: QOM styling fixes
xilinx_spips: Add missing dual-bus snoop commands
xilinx_spips: Fix bus setup conditional check
xilinx_spips: Set unused IRQs to NULL
xilinx_zynq: added pl330 to machine model
pl330: Initial version
iov: Factor out hexdumper
hw/vexpress: Set reset values for daughterboard oscillators
hw/arm_sysctl: Implement SYS_CFG_OSC function
hw/vexpress: Pass voltage sensor properties to sysctl device
hw/arm_sysctl: Implement SYS_CFG_VOLT
qdev: Implement (variable length) array properties
hw/arm_sysctl: Convert from qdev init to instance_init
hw/arm_sysctl: Implement SYS_CFG_DVIMODE as a no-op
hw/arm_sysctl: Implement SYS_CFG_MUXFPGA writes as a no-op
hw/arm_sysctl: Handle SYS_CFGCTRL in a more structured way
hw/vexpress: Pass proc_id via VEDBoardInfo
Fix for rndrashift_short_acc to set correct value to higher 64 bits.
This change also corrects conditions when bit 23 of the DSPControl register
is set.
The existing test files have been extended with several examples that
trigger the issues. One bug/example in the test file for EXTR_RS_W has been
found and reported by Klaus Peichl.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Added additional commands to the switch to check for when snooping commands in
dual bus mode setups. Cleaned up code to use an enum.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 848c116c711dab0af10729a487968384aadd9faf.1362373359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The R_LQPSI_CFG register has the LQSPI_CFG_SEP_BUS and LQSPI_CFG_TWO_MEM bits.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d76c8e364c80a42352ae4f0661aff2cd17ad32a4.1362373359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device model for Primecell PL330 DMA controller.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Factor out the hexdumper functionality from iov for all to use. Useful for
creating verbose debug printfery that dumps packet data.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: faaac219c55ea586d3f748befaf5a2788fd271b8.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the SYS_CFG_OSC function. Since the idea of
programmable clock rates doesn't make much sense for QEMU,
we simply allow the clock rate to be read back as written.
The number and value of the daughterboard oscillators varies
between daughterboards, so we provide an array property to
allow their reset values to be configured.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass voltage sensor properties to the sysctl device. Since
these are daughterboard specific, we specify them via the
VEDBoardInfo structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1359985476-29380-9-git-send-email-peter.maydell@linaro.org
Implement the SYS_CFG_VOLT registers which return the voltage
of various supplies on motherboard and daughterboard. Since
QEMU implements a perfectly stable power supply these registers
always return a constant value. The number and value of the
daughterboard voltages is dependent on the specific daughterboard,
so we use a property array to allow the board to configure them
appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for declaring array properties for qdev devices.
These work by defining an initial static property 'len-arrayname'
which the user of the device should set to the desired size
of the array. When this property is set, memory is allocated
for the array elements, and dynamic properties "arrayname[0]",
"arrayname[1]"... are created so the user of the device can
then set the values of the individual array elements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert this device from old-style qdev init to an instance_init
function. We don't need a realize function yet, though.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SYS_CFG_DVIMODE allows the guest to select whether the
output DVI signal is VGA, SVGA, XGA, SGA or UXGA. Since
this makes no difference to QEMU, implement writes as a
no-op so Linux doesn't complain.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SYS_CFG_MUXFPGA allows the guest to select whether the
video output should come from the motherboard's LCD
controller or the daughterboard's one. Since QEMU doesn't
currently support selecting the video output like this,
implement as a no-op, so Linux doesn't complain about
the register not being implemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SYS_CFGCTRL register consists of separate fields
for DCC, function, site, position and device, as well
as a read/write bit. Refactor the code handling SYS_CFGCTRL
writes to make it easier to add support for functions
like SYS_CFG_OSC which support multiple device fields.
We also pull the handling out into its own function for
clarity, as there are potentially a lot of implementable
subfunctions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the daughterboard-specific proc_id property to the code that
creates the sysctl device via the VEDBoardInfo struct, rather than
by having the daughterboard init function write to a uint32_t*
argument. This is a cleaner way to pass the info around, and
is in line with the way we are going to handle voltage and
oscillator initialization.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the Makefile creates TAGS for emacs with the command:
find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
That works only if xargs ends up invoking etags just once. If xargs runs
etags several times, as it will if there are enough files, then the later
invocations will overwrite the output from the earlier invocations. This
patch uses the etags --append option to fix the bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1363057048-21534-1-git-send-email-david@gibson.dropbear.id.au
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Michael Walle