Now that "and" with 0xff, 0xffff and 0xffffffff and "shr" with 0 shift
are optimized in tcg/tcg-op.h there is no need to do it in
target-xtensa/translate.c.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case Coprocessor Context option is enabled CPENABLE SR bits control
whether access to coprocessors is allowed or would rise one of
CoprocessorXDisabled exceptions.
See ISA, 4.4.5 for more details.
FP is coprocessor 0.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are comparison and conditional move opcodes.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are FP to integer and integer to FP conversion opcodes.
See ISA, 4.3.10 for more details.
Note that ISA description for utrunc.s is currently incorrect and will
be fixed in future revisions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are FP arithmetic opcodes.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are load/store instructions for FP registers with immediate or
register index and optional base post-update.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There are 16 32-bit FP registers (f0 - f15), control and status user
registers (fcr, fsr).
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Unconditional gen_check_loop_end at the end of disas_xtensa_insn
can emit tcg_gen_goto_tb with slot id already used in the TB (e.g. when
TB ends at LEND with a branch).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: malc <av1474@comtv.ru>
Put the following errno value mappings under #ifdef:
xtensa-semi.c: In function 'errno_h2g':
xtensa-semi.c:113: error: 'ENOTBLK' undeclared (first use in this function)
xtensa-semi.c:113: error: (Each undeclared identifier is reported only once
xtensa-semi.c:113: error: for each function it appears in.)
xtensa-semi.c:113: error: array index in initializer not of integer type
xtensa-semi.c:113: error: (near initialization for 'guest_errno')
xtensa-semi.c:124: error: 'ETXTBSY' undeclared (first use in this function)
xtensa-semi.c:124: error: array index in initializer not of integer type
xtensa-semi.c:124: error: (near initialization for 'guest_errno')
xtensa-semi.c:134: error: 'ELOOP' undeclared (first use in this function)
xtensa-semi.c:134: error: array index in initializer not of integer type
xtensa-semi.c:134: error: (near initialization for 'guest_errno')
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Guest errno values are taken from the newlib. Convert only those errno
values that can be returned from used system calls.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This prevents guest from proceeding with uninitialised garbage returned
from unimplemented simcalls.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu:
target-i386: move tcg initialization into x86_cpu_initfn()
cleanup cpu_set_debug_excp_handler
target-xtensa: drop usage of prev_debug_excp_handler
target-i386: drop usage of prev_debug_excp_handler
This makes usable default for -cpu option both for qemu-system-xtensa
and qemu-system-xtensaeb fixing the following error:
$ qemu-system-xtensaeb -M sim
Unable to find CPU definition
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Quote from ISA, 2.1:
For most Xtensa instructions, bit numbering is irrelevant; only the BBC
and BBS instructions assign bit numbers to values on which the processor
operates. The BBC/BBS instructions use big-endian bit ordering (0 is the
most-significant bit) on a big-endian processor configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Chains of exception handlers are currently unused feature. Dropping it
to be consistent with target-i386 but it may simplify qom-ifying CPU
in future like for target-i386.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Add env parameter to every helper function that needs it, update
'configure' script.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mark exception generating functions 'noreturn' and pure constant
functions as such.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Peter Portante <peter.portante@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Taken conditional branches fail to update CCOUNT register because
accumulated ccount_delta is reset during translation of non-taken
branch. To fix it only update CCOUNT once per conditional branch
instruction translation.
This fixes guest linux freeze on LTP waitpid06 test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hardware pagetable walking may not be nested. Stop guessing and pass
explicit flag to the get_physical_addr_mmu function that controls page
table lookup.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is to avoid interference of internal QEMU helpers
(cpu_get_phys_page_debug, tb_invalidate_virtual_addr) with guest-visible
TLB state.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to ISA, 4.4.2.6, EXCVADDR may be changed by any TLB miss, even
if the miss is handled entirely by processor hardware.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Both old and new mappings need flushing because their VPN may be
different in MMU case.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In commit 1bba0dc932 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.
All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Make the include paths for cpu-qom.h consistent to allow using XtensaCPU
in cpu.h.
Turn cpu_init macro into a static inline function returning
CPUXtensaState for backwards compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Translation of LOOP instructions used to call LEND SR write handler to
update LEND and invalidate relevant TBs. Now that LEND SR write handler
ends TB, LOOPNEZ and LOOPGTZ generate wrong code (same as for simple
LOOP). Fix it by calling wsr_lend helper directly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is Diamond 233L Standard Core Rev.C (LE), implemented through
linux/gdb overlay.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instruction breakpoint/zero overhead loop handling code is built into
TBs pointed to by IBREAKA/LEND SRs. When these or related SRs get
changed TBs at virtual addresses corresponding to their old and their
new values must be invalidated.
Virtual address range is passed to the tb_invalidate_phys_page_range,
which is incorrect in system emulation mode.
To fix it use guest TLB/MMU to translate virtual address to physical
address.
However the guest may not have virtual-to-physical mapping at the moment
of IBREAKA/LEND change, thus this fix is not 100% accurate.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move XtensaConfig-independent code from cpu_xtensa_init() into a
QOM initfn, as a start.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move code from cpu_state_reset() into QOM xtensa_cpu_reset().
To avoid moving reset_mmu() and dependencies, make it non-static.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Embed CPUXtensaState as first member of XtensaCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Provides a file naming scheme consistent with other targets.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
sed -i "s/CPUState/CPUXtensaState/g" target-xtensa/*.[hc]
sed -i "s/#define CPUXtensaState/#define CPUState/" target-xtensa/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
* 'upstream' of git://qemu.weilnetz.de/qemu:
Move definition of HOST_LONG_BITS to qemu-common.h
target-xtensa: Clean includes
target-unicore32: Clean includes
target-sh4: Clean includes
target-s390x: Clean includes
target-ppc: Clean includes
target-mips: Clean includes
target-microblaze: Clean includes
target-m68k: Clean includes
target-lm32: Clean includes
target-i386: Clean includes
target-cris: Clean includes
target-arm: Clean includes
target-alpha: Clean includes
Remove macro HOST_LONG_SIZE
Fill debug configuration from overlay definitions in the DEBUG_SECTION.
Add DEBUG_SECTION to DC232B and FSF cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add DBREAKA/DBREAKC SRs and implement DBREAK breakpoints as debug
watchpoints.
This implementation is not fully compliant to ISA: when a breakpoint is
set to an unmapped/inaccessible memory address it generates TLB/memory
protection exception instead of debug exception.
See ISA, 4.7.7.3, 4.7.7.6 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
ICOUNT SR gets incremented on every instruction completion provided that
CINTLEVEL at the beginning of the instruction execution is lower than
ICOUNTLEVEL.
When ICOUNT would increment to 0 a debug exception is raised if
CINTLEVEL is lower than DEBUGLEVEL.
See ISA, 4.7.7.5 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Aurelien Jarno