RHEL7 and others are stuck with libiscsi 1.9.0 since there
unfortunately was an ABI breakage after that release.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435313881-19366-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Only poll the specific type of event we are interested in, to avoid
stealing events that should be consumed by someone else.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This checks that the discard on mirror source that effectively zeroes
data is also reflected by the data of target.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using this function would always be wrong because a dirty bitmap must
have a specific owner that consumes the dirty bits and calls
bdrv_reset_dirty_bitmap().
Remove the unused function to avoid future misuse.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Unsetting dirty globally with discard is not very correct. The discard may zero
out sectors (depending on can_write_zeroes_with_unmap), we should replicate
this change to destination side to make sure that the guest sees the same data.
Calling bdrv_reset_dirty also troubles mirror job because the hbitmap iterator
doesn't expect unsetting of bits after current position.
So let's do it the opposite way which fixes both problems: set the dirty bits
if we are to discard it.
Reported-by: wangxiaolong@ucloud.cn
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If guest discards a source cluster, mirroring with bdrv_aio_readv is overkill.
Some protocols do zero upon discard, where it's best to use
bdrv_aio_write_zeroes, otherwise, bdrv_aio_discard will be enough.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If specified as "true", it allows discarding on target sectors where source is
not allocated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Like bdrv_is_allocated_above, this function follows the backing chain until seeing
BDRV_BLOCK_ALLOCATED. Base is not included.
Reimplement bdrv_is_allocated on top.
[Initialized bdrv_co_get_block_status_above() ret to 0 to silence
mingw64 compiler warning about the unitialized variable. assert(bs !=
base) prevents that case but I suppose the program could be compiled
with -DNDEBUG.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We want to be able to reuse this define by making it common to
multiple QEMU modules.
This also makes it an integer since there's no need for it to be a
float.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 6375912849da2ab561046dd013684535ccecca44.1434113783.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_close already does that, and in fact hmp_drive_del would need
another drain after the flush (which bdrv_close does). So remove
the duplication.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432822629-25401-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If we wish to make differential backups a feature that's easy to access,
it might be pertinent to rename the "dirty-bitmap" mode to "incremental"
to make it clear what /type/ of backup the dirty-bitmap is helping us
perform.
This is an API breaking change, but 2.4 has not yet gone live,
so we have this flexibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1433463642-21840-2-git-send-email-jsnow@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes a crash during image compression
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libiscsi starting with 1.15 will properly support timeout of iscsi
commands. The default will remain no timeout, but this can
be changed via cmdline parameters, e.g.:
qemu -iscsi timeout=30 -drive file=iscsi://...
If a timeout occurs a reconnect is scheduled and the timed out command
will be requeued for processing after a successful reconnect.
The required API call iscsi_set_timeout is present since libiscsi
1.10 which was released in October 2013. However, due to some bugs
in the libiscsi code the use is not recommended before version 1.15.
Please note that this patch bumps the libiscsi requirement to 1.10
to have all function and macros defined. The patch fixes also a
off-by-one error in the NOP timeout calculation which was fixed
while touching these code parts.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1434455107-19328-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Spotted by Coverity, because (env->PCXI & MASK_PCXI_PCPN) >> 24
is always zero. The immediately preceding assignment is also
wrong though.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <1435147270-1040-1-git-send-email-pbonzini@redhat.com>
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
=6WvB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
Fix glib_subprocess test
hw/pci-bridge: format special OFW unit address for PXB host
hw/core: explicit OFW unit address callback for SysBusDeviceClass
hw/pci-bridge: disable SHPC in PXB
hw/pci-bridge: introduce "shpc" property
hw/pci: introduce shpc_present() helper function
hw/pci-bridge: add macro for "msi" property
hw/pci-bridge: add macro for "chassis_nr" property
hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
add pci-bridge-seat
pc: cleanup and convert TMP ACPI device description to AML API
MAINTAINERS: add ACPI entry
vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
balloon: add a feature bit to let Guest OS deflate balloon on oom
qdev: fix OVERFLOW_BEFORE_WIDEN
virito-pci: fix OVERRUN problem
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Change the virt board's default interface type for block devices to virtio
* Improve some error messages that will now be triggered by some incorrect
but previously worked-by-accident command lines
* Print ELR if we're doing debug logging of AArch64 exception entry
* Handle the "completely empty semihosting commandline" correctly for
softmmu (we already did for linux-user)
* Add GICv2m description to ACPI tables for virt board
* Fix some incorrect table revision entries in virt board ACPI tables
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T4ln
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150626' into staging
target-arm queue:
* Change the virt board's default interface type for block devices to virtio
* Improve some error messages that will now be triggered by some incorrect
but previously worked-by-accident command lines
* Print ELR if we're doing debug logging of AArch64 exception entry
* Handle the "completely empty semihosting commandline" correctly for
softmmu (we already did for linux-user)
* Add GICv2m description to ACPI tables for virt board
* Fix some incorrect table revision entries in virt board ACPI tables
# gpg: Signature made Fri Jun 26 14:29:39 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150626:
hw/arm/virt: Make block devices default to virtio
qdev-properties-system: Improve error message for drive assignment conflict
qdev-properties-system: Change set_pointer's parse callback to use Error
target-arm: A64: Print ELR when taking exceptions
target-arm: default empty semihosting cmdline
hw/arm/virt-acpi-build: Add GICv2m description in ACPI MADT table
hw/arm/virt-acpi-build: Fix table revision and some comments
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we have virtio-pci, we can make the virt board's default block
device type be IF_VIRTIO. This allows users to use simplified
command lines that don't have to explicitly create virtio-pci-blk
devices; the -hda &c very short options now also work.
This means we also need to set no_cdrom to avoid getting a
default cdrom device -- this is needed because the virtio-blk
device will fail if it is connected to a block backend with
no media, which is what the default cdrom device typically is.
Providing a cdrom with media via -cdrom will succeed, but silently
create a device with non-removable medium. this is probably
not really what the user wants, but is the best we can do now.
Note that this change means that some command lines which used
to work (by accident) will stop working. Where a drive was connected
manually to a device but without 'if=none' being specified, we
used to treat this as an IDE drive, which we would then not autoplug
because the board doesn't support IDE. Now we will treat it as a
virtio disk and autoplug it, which means the attempt to use the
drive manually will fail:
qemu-system-arm: -drive file=img.qcow2,id=foo: Drive 'foo' is already
in use because it has been automatically connected to another device
(did you need 'if=none' in the drive options?)
The command line will have to be changed to include 'if=none', as the
error message suggests.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-4-git-send-email-peter.maydell@linaro.org
If the user forgot if=none on their drive specification they're likely
to get an error message because the drive is assigned once automatically
by QEMU and once by the manual id=/drive= user command line specification.
Improve the error message produced in this case to explicitly guide the
user towards if=none.
We rephrase the "drive conflict but not for an if=something" error as
well to keep the wording in line.
The two cases that change are:
(1) Drive specified as to be auto-connected and also manually connected
(and the board does handle this if= type):
qemu-system-x86_64 -nodefaults -display none \
-drive if=scsi,file=tmp.qcow2,id=foo -device ide-hd,drive=foo
Previously:
qemu-system-x86_64: -device ide-hd,drive=foo: Property 'ide-hd.drive'
can't take value 'foo', it's in use
Now:
qemu-system-x86_64: -device ide-hd,drive=foo: Drive 'foo' is already in
use because it has been automatically connected to another device (did
you need 'if=none' in the drive options?)
(2) Drive specified to be manually connected in two different ways:
qemu-system-x86_64 -nodefaults -display none \
-drive if=none,file=tmp.qcow2,id=foo -device ide-hd,drive=foo \
-device ide-hd,drive=foo
Previously:
qemu-system-x86_64: -device ide-hd,drive=foo: Property 'ide-hd.drive'
can't take value 'foo', it's in use
Now:
qemu-system-x86_64: -device ide-hd,drive=foo: Drive 'foo' is already in
use by another device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-3-git-send-email-peter.maydell@linaro.org
Instead of having set_pointer() call a parse callback which returns
an error number that we then convert to an Error string with
error_set_from_qdev_prop_error(), make the parse callback take an
Error** and set the error itself. This will allow parse routines
to provide more helpful error messages than the generic ones.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-2-git-send-email-peter.maydell@linaro.org
When taking an exception print the content of the exception link
register. This is useful especially for synchronous exceptions because
in that case this registers holds the address of the instruction that
generated the exception.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Message-id: 1435036655-16132-1-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If neither explicit semihosting args nor -kernel are used,
make SYS_GET_CMDLINE return an empty string.
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Message-id: AC7B5AFC-06AE-4FAD-9852-B65708E80E09@livius.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add GICv2m description in ACPI MADT table, so guest can use MSI when
booting with ACPI.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Message-id: 1434676210-2276-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The table revision is not the ACPI spec version. Fix the wrong revision
and also some comments.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1433820378-8336-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a new CPU definition supporting MIPS32 Release 6 ISA and
microMIPS32 Release 6 ISA.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Add new microMIPS32 Release 6 Major opcode instructions
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Add new microMIPS32 Release 6 POOL32I/POOL32C type instructions
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Add new microMIPS32 Release 6 branch and jump instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signal a Reserved Instruction exception for removed instruction encoding
in microMIPS Release 6.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
64-bit paired-single (PS) floating point data type is optional in the
pre-Release 6.
It has to raise RI exception when PS type is not implemented. (FIR.PS = 0)
(The PS data type is removed in the Release 6.)
Loongson-2E and Loongson-2F don't have any implementation field in
FCSR0(FIR) but do support PS data format, therefore for these cores RI will
not be signalled regardless of PS bit.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The function will be also used for microMIPS Release 6.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Refactor those instructions in order to reuse them for microMIPS32
Release 6.
Rearrange gen_move_low32().
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Remove an unused argument from decode_micromips32_opc()
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
rt, rs were swapped
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Convert only errno values which can be returned by system calls in
mips-semi.c and are not generic to all archs.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Add UHI semihosting support for MIPS. QEMU run with "-semihosting" option
will alter the behaviour of SDBBP 1 instruction -- UHI operation will be
called instead of generating a debug exception.
Also tweak Malta's pseudo-bootloader. On CPU reset the $4 register is set
to -1 if semihosting arguments are passed to indicate that the UHI
operations should be used to obtain input arguments.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The BEV flag controls whether the boot exception vector is still
in place when starting a kernel. When cleared the exception vector
at EBASE (or hard coded address of 0x80000000) is used instead.
The early stages of the linux kernel would benefit from BEV still
being set to ensure any faults get handled by the boot rom exception
handlers. This is a moot point for system qemu as there aren't really
any BEV handlers, but there are other good reasons to change this...
The UHI (semi-hosting interface) defines special behaviours depending
on whether an application starts in an environment with BEV set or
cleared. When BEV is set then UHI assumes that a bootloader is
relatively dumb and has no advanced exception handling logic.
However, when BEV is cleared then UHI assumes that the bootloader
has the ability to handle UHI exceptions with its exception handlers
and will unwind and forward UHI SYSCALL exceptions to the exception
vector that was installed prior to running the application.
Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Peter Lieven