This patch enables protocol drivers to use their create options which
are not supported by the format. For example, protcol drivers can use
a backing_file option with raw format.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With overlapping requests, the total number of sectors is smaller than the sum
of the nb_sectors of both requests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
l2_allocate has some intermediate states in which the image is inconsistent.
Change the order to write to the L1 table only after the new L2 table has
successfully been initialized.
Also reset the L2 cache in failure case, it's very likely wrong.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the L2 table was already updated in cache, but writing it to disk has
failed, we must not continue using the changed version in the cache to stay
consistent with what's on the disk.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix build failure introduced by 0bfcd599e3
The format statement expects unsigned long on x86_64, but receives
unsigned long long, so gcc exits with an error.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When using -snapshot we don't care about data integrity of the cow file
at all, so let's disable flushing there and squeeze out the last drop
of performance we could possibly get.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
- remove unused host state and store pci bus pointer only
- do not map host state access into unused 1fe.10000000 range
- reorder pci region registration
- assign pci i/o region to isa_mem_base
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Usually the guest can tell the host to flush data to disk. In some cases we
don't want to flush though, but try to keep everything in cache.
So let's add a new cache value to -drive that allows us to set the cache
policy to most aggressive, disabling flushes. We call this mode "unsafe",
as guest data is not guaranteed to survive host crashes anymore.
This patch also adds a noop function for aio, so we can do nothing in AIO
fashion.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Uses VNC_ENCODING_RICH_CURSOR. Adding XCURSOR support should be
possible without much trouble. Shouldn't be needed though as
RICH_CURSOR is a superset of XCURSOR.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new cursor type to console.h and a bunch of functions to
deal with cursors the (new) cursor.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need to close the file even in error case. While at it, make the callers
catch all kind of errors. ENOENT is allowed for default config files, they
are optional.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
hw/virtio-net.h:
#define ETH_ALEN 6
ETH_ALEN was defined by commit 7967406801
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Unless we are running in full-screen mode, QEMU's SDL window should not
disable the host's screensaver. The user can still change this behaviour
by setting the environment variable SDL_VIDEO_ALLOW_SCREENSAVER as
desired.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a mismerge of 64d564094c (wrong
patch version): We need to mask the tag value properly to obtain its
device ID.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
- two pairs of softmmu indexes bind softmmu tlb to cpu tlb in fault handlers
using value of DMMU primary and secondary context registers, so we need to
flush softmmu translations when context registers are changed
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- cpu_mmu_index return MMU_NUCLEUS_IDX if trap level is not zero
- cpu_get_tb_cpu_state: store trap level and primary context in flags
this allows to restart code translation when address translation is changed
- stop translation block after writing to pstate and tl registers
- stop translation block after writing to alternate space
this can be optimized to stop only if address translation can be changed
by write operation (e.g. by comparing with MMU ASI values)
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- refactor code to handle hpstate only if available for current cpu
- conditionally set hypervisor bit in hpstate register
- reorder softmmu indices so user accessable ones go first, translation context
macros supervisor() and hypervisor() adjusted as well
- disable sparcv8 registers for TARGET_SPARC64
- fix cpu_mmu_index to use sparcv9 bits only
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- separate PRIV and PROT handling
- DPRINTF_MMU macro to clean up debug code
- dump mmu_idx, trap level and mmu context registers
along with address translation values
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
On a real hardware changing read-only bits has no effect
Use a mask common for SCSI and Ethernet registers. The crucial
bit is DMA_INTR, because setting or clearing it may produce
spurious interrupts.
This patch allows booting Solaris 2.3
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cirrus_post_load() will be executed twice when loading vm states and then the
wrong physical memory will be registered. This issue may lead to crash qemu.
Signed-off-by: TeLeMan <geleman@gmail.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 6616b2ad reverted commit 40ea285c. Looks like a mismerge to
me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The 'tarbin' Makefile rule doesn't include qemu-system-sparc64, but
should do, now that sparc64-softmmu is in the default target list.
The rule attempts to tar up binaries that were not built if a target
list was passed to the configure script -- in which case, it will
either fail, or otherwise include binaries from previous builds.
Fix both problems once and for all by building a list of binaries to
include in the tarball, using the list of targets to be built.
Signed-off-by: Stuart Brady <sdb@zubnet.me.uk>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This seems to resolve subtle breakages of our build system:
Dependency files generated for targets like 'dir/foo.o' were saved as
'foo.d'. Now, if there was also a target 'foo.o', one of the dependency
file was overwritten. Concrete example: libhw*/macio.o vs.
libhw*/ide/macio.o. And this often left a segfaulting build result
behind when changing the "wrong" data structures".
Fix it by generating proper 'dir/foo.d'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Libc will fallback gracefully if pselect6 is not available. Thus put
pselect6 to nowarn until the atomicity issues of the original pselect6
patch are dealt with.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Cc: Michael Casadevall <mcasadevall@ubuntu.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(1) The output registers were not marked call-clobbered, even though
they can be modified by called functions.
(2) The thread pointer was not marked reserved.
(3) R4-R6 are call-saved, but not saved by the prologue. Rather than
save them, mark them reserved so that we don't use them.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that the prologue is generated after GUEST_BASE is fixed,
we can load it as an immediate, and also avoid reserving the
register if it isn't necessary.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This will allow backends to make intelligent choices about how
to implement GUEST_BASE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha passes oldset by value in a register, and returns the newset
as the return value; as compared to the standard implementation in
which both are passed by reference. This requires being able to
distinguish negative return values that are not errors. Do this in
the same way as the Alpha Linux kernel, by storing a zero in V0 in
the implementation of the syscall.
At the same time, fix a think-o in the regular sigprocmask path in
which we passed the target, rather than the host, HOW value.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha passes the signal set in a register, not by reference.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
At the same time, tidy the code wrt MIPS and SH4 which have the
same two register return mechanism. Fix confusion between pipe
and pipe2 with an explicit flags=0, when the guest will not be
using the two register return mechanism.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MORITA Kazutaka