At the same time, validate the type argument in tcg_out_mov.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to split out bytecode output into helpers, but
we can't do that one at a time if tcg_out_op_t is being done
outside of the switch.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Actually print arguments as opposed to simply the opcodes
and, uselessly, the argument counts. Reuse all of the helpers
developed as part of the interpreter.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is unused. It's not even the disassembler,
which is print_insn_tci, located in disas/tci.c.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This performs the size check while reading the arguments,
which means that we don't have to arrange for it to be
done after the operation. Which tidies all of the branches.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are currently using the "natural" size routine, which
uses 64-bits on a 64-bit host. The TCGMemOpIdx operand
has 11 bits, so we can safely reduce to 32-bits.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the correct set of asserts during code generation.
We do not require the first input to overlap the output;
the existing interpreter already supported that.
Split out tci_args_rrrbb in the translator.
Use the deposit32/64 functions rather than inline expansion.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert to indirect jumps, as it's less complicated.
Then we just have a pointer to the tb address at which
the chain is stored, from which we read.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not emit a uint64_t, but a tcg_target_ulong, aka uintptr_t.
This reduces the size of the constant on 32-bit hosts.
The assert for label != NULL has to be removed because that
is a valid value for exit_tb.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Begin splitting out functions that do pure argument decode,
without actually loading values from the register set.
This means that decoding need not concern itself between
input and output registers. We can assert that the register
number is in range during decode, so that it is safe to
simply dereference from regs[] later.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the next patches, we want to use tci_read_r to return
the raw register number. So rename the existing function,
which returns the register value, to tci_read_rval.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These operations are always available under different names:
INDEX_op_ext_i32_i64 and INDEX_op_extu_i32_i64, so we remove
no code with the ifdef.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJgTx3xAAoJEO8Ells5jWIRtBsH/2MCZJKg4wTB4a7qAYTyuUmZ
qz1Z8d5J1JSyAQiiUN+lFo1Gtpuqpyci4CT5gHz4ru2UV9DBJy9cDGApug66QOM8
stbztOeRIfcLLeWCepQIoSESteesiyMM6h1Q/x9lF87eN7JXrNmACp+jAhTDHq1B
QFwYVGLwkaFkvE9G04yzCZSo37+j2nPAauIuoJs1B01on6a5hj7Isdumn2P1TGyz
6nJTkyWLsPzEM+lGMfxYdMpnELibJ935CX78DGcnZK9qhI7rw4xLFuZtyTW+N+B8
h5OX9aCqrIF5AX7xNTvQeQwclnEe+KzBUwkbDJARViEUDOoKfb6t1Yv+3Xghdqo=
=57xH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 15 Mar 2021 08:42:25 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: Do not fill legacy info_str for backends
hmp: Use QAPI NetdevInfo in hmp_info_network
net: Move NetClientState.info_str to dynamic allocations
tests: Add tests for query-netdev command
qapi: net: Add query-netdev command
pvrdma: wean code off pvrdma_ring.h kernel header
lan9118: switch to use qemu_receive_packet() for loopback
cadence_gem: switch to use qemu_receive_packet() for loopback
pcnet: switch to use qemu_receive_packet() for loopback
rtl8139: switch to use qemu_receive_packet() for loopback
tx_pkt: switch to use qemu_receive_packet_iov() for loopback
sungem: switch to use qemu_receive_packet() for loopback
msf2-mac: switch to use qemu_receive_packet() for loopback
dp8393x: switch to use qemu_receive_packet() for loopback packet
e1000: switch to use qemu_receive_packet() for loopback
net: introduce qemu_receive_packet()
e1000: fail early for evil descriptor
net: validate that ids are well formed
net: Fix build error when DEBUG_NET is on
virtio-net: calculating proper msix vectors on init
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
Replaced various qemu_mutex_lock calls and their respective
qemu_mutex_unlock calls with QEMU_LOCK_GUARD macro. This simplifies
the code by eliminating the respective qemu_mutex_unlock calls.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210311031538.5325-7-ma.mandourr@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Removed various qemu_mutex_lock and their respective qemu_mutex_unlock
calls and used lock guard macros (QEMU_LOCK_GUARD and
WITH_QEMU_LOCK_GUARD). This simplifies the code by
eliminating qemu_mutex_unlock calls.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210311031538.5325-6-ma.mandourr@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If any error happens during multifd send thread creating (e.g. channel broke
because new domain is destroyed by the dst), multifd_tls_handshake_thread
may exit silently, leaving main migration thread hanging (ram_save_setup ->
multifd_send_sync_main -> qemu_sem_wait(&p->sem_sync)).
Fix that by adding error handling in multifd_tls_handshake_thread.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Message-Id: <20210209104237.2250941-3-wanghao232@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Function multifd_channel_connect() return "true" to indicate failure,
which is rather confusing. Fix that.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Message-Id: <20210209104237.2250941-2-wanghao232@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Both currently only return 0 or 1.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312141003.819108-3-groug@kaod.org>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When passed an empty filename, lookup_name() returns the inode of
the parent directory, unless the parent is the root in which case
the st_dev doesn't match and lo_find() returns NULL. This is
because lookup_name() passes AT_EMPTY_PATH down to fstatat() or
statx().
This behavior doesn't quite make sense because users of lookup_name()
then pass the name to unlinkat(), renameat() or renameat2(), all of
which will always fail on empty names.
Drop AT_EMPTY_PATH from the flags in lookup_name() so that it has
the consistent behavior of "returning an existing child inode or
NULL" for all directories.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312141003.819108-2-groug@kaod.org>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
POSIX.1-2017 clearly stipulates that empty filenames aren't
allowed ([1] and [2]). Since virtiofsd is supposed to mirror
the host file system hierarchy and the host can be assumed to
be linux, we don't really expect clients to pass requests with
an empty path in it. If they do so anyway, this would eventually
cause an error when trying to create/lookup the actual inode
on the underlying POSIX filesystem. But this could still confuse
some code that wouldn't be ready to cope with this.
Filter out empty names coming from the client at the top level,
so that the rest doesn't have to care about it. This is done
everywhere we already call is_safe_path_component(), but
in a separate helper since the usual error for empty path
names is ENOENT instead of EINVAL.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_170
[2] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_13
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312141003.819108-4-groug@kaod.org>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Option "-V" currently displays the fuse protocol version virtiofsd is
using. For example, I see this.
$ ./virtiofsd -V
"using FUSE kernel interface version 7.33"
People also want to know software version of virtiofsd so that they can
figure out if a certain fix is part of currently running virtiofsd or
not. Eric Ernst ran into this issue.
David Gilbert thinks that it probably is best that we simply carry the
qemu version and display that information given we are part of qemu
tree.
So this patch enhances version information and also adds qemu version
and copyright info. Not sure if copyright information is supposed
to be displayed along with version info. Given qemu-storage-daemon
and other utilities are doing it, so I continued with same pattern.
This is how now output looks like.
$ ./virtiofsd -V
virtiofsd version 5.2.50 (v5.2.0-2357-gcbcf09872a-dirty)
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
using FUSE kernel interface version 7.33
Reported-by: Eric Ernst <eric.g.ernst@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210303195339.GB3793@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
QEMU can stop a virtqueue by sending a VHOST_USER_GET_VRING_BASE request
to virtiofsd. As with all other vhost-user protocol messages, the thread
that runs the main event loop in virtiofsd takes the vu_dispatch lock in
write mode. This ensures that no other thread can access virtqueues or
memory tables at the same time.
In the case of VHOST_USER_GET_VRING_BASE, the main thread basically
notifies the queue thread that it should terminate and waits for its
termination:
main()
virtio_loop()
vu_dispatch_wrlock()
vu_dispatch()
vu_process_message()
vu_get_vring_base_exec()
fv_queue_cleanup_thread()
pthread_join()
Unfortunately, the queue thread ends up calling virtio_send_msg()
at some point, which itself needs to grab the lock:
fv_queue_thread()
g_list_foreach()
fv_queue_worker()
fuse_session_process_buf_int()
do_release()
lo_release()
fuse_reply_err()
send_reply()
send_reply_iov()
fuse_send_reply_iov_nofree()
fuse_send_msg()
virtio_send_msg()
vu_dispatch_rdlock() <-- Deadlock !
Simply have the main thread to release the lock before going to
sleep and take it back afterwards. A very similar patch was already
sent by Vivek Goyal sometime back:
https://listman.redhat.com/archives/virtio-fs/2021-January/msg00073.html
The only difference here is that this done in fv_queue_set_started()
because fv_queue_cleanup_thread() can also be called from virtio_loop()
without the lock being held.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210312092212.782255-8-groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Once we've parsed the fractional value, extract it into an integral
64-bit fraction. Perform the scaling with integer arithmetic, and
simplify the overflow detection.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210315155835.1970210-2-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stale data in csw (specifically residue) can confuse the state machine
and allows the guest trigger an assert(). So clear csw on reset to
avoid this happening in case the guest resets the device in the middle
of a request.
Buglink: https://bugs.launchpad.net/qemu/+bug/1523811
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210312094954.796799-1-kraxel@redhat.com>
Add new kconfig symbols so usb-storage and usb-bot can
be enabled or disabled individually at build time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210312090425.772900-5-kraxel@redhat.com>
In preparation for splitting the usb-storage.c file move
declarations to the new usb/msd.h header file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210312090425.772900-2-kraxel@redhat.com>
Extract the VT82C686 PCI UHCI function into a new unit so
it is only build when the VT82C686 south bridge is selected.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210309190802.830969-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Richard Henderson