Clean up handling of CP0 register 5.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-7-git-send-email-aleksandar.markovic@rt-rk.com>
Clean up handling of CP0 register 4.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-6-git-send-email-aleksandar.markovic@rt-rk.com>
Clean up handling of CP0 register 3.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-5-git-send-email-aleksandar.markovic@rt-rk.com>
Clean up handling of CP0 register 2.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-4-git-send-email-aleksandar.markovic@rt-rk.com>
Clean up handling of CP0 register 1.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-3-git-send-email-aleksandar.markovic@rt-rk.com>
Clean up handling of CP0 register 0.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1567009614-12438-2-git-send-email-aleksandar.markovic@rt-rk.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.
Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-12-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-10-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-8-git-send-email-aleksandar.markovic@rt-rk.com>
Fixes mostly errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1566216496-17375-7-git-send-email-aleksandar.markovic@rt-rk.com>
We should avoid including the whole of softfloat headers in cpu.h and
explicitly include it only where we will be calling softfloat
functions. We can use the -types.h in cpu.h for the few bits that are
global. We also move the restore_snan_bit_mode into internal.h and
include -helpers.h there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me. However, the next commit will drop
migration/vmstate.h from a massive number of compiles. Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
Fix emulation of MSA pack instructions on big endian hosts.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1563812573-30309-3-git-send-email-aleksandar.markovic@rt-rk.com>
This was found by GCC 8.3 static analysis.
Missed in commit fb32f8c856.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1563812573-30309-2-git-send-email-aleksandar.markovic@rt-rk.com>
This was found by GCC 8.3 static analysis.
Fixes: ead9360e2f
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1563220847-14630-5-git-send-email-aleksandar.markovic@rt-rk.com>
This was found by GCC 8.3 static analysis.
Fixes: ead9360e2f
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1563220847-14630-4-git-send-email-aleksandar.markovic@rt-rk.com>
This was found by GCC 8.3 static analysis.
Fixes: 5fb2dcd179
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1563220847-14630-3-git-send-email-aleksandar.markovic@rt-rk.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdG4G5AAoJENSXKoln91plV1UH/0pnDNiBR0AKu3cqY6fYuPMI
9cyh/z5KSW11+KuXjh0t73fzDPL34z6jXoZU681yLU2IppyN0OXOKduKjFxzwU1Z
rwLvTmXfHlvLGj66GJIhzBFKYCsRlJ6ZeLjUTFCjEUofww8z6LWaOEXvjo0qS1db
Kx0bZtNpIhNnNCFukxjU2qMUpH/Gk17UvC4F9v5882QpXJAUsPhv/lb9nSfx7Fve
xiyiFk6cYUdmErvwUwNWhuFeZGKaAOfnBMcJEX5u28C82tyRT4D/cc1gM8OivVPO
enDDLMqch/8hTdxXvm1TI7FSS4445noRhfzuu1IErrnOXwRS3KGHoi0LyM1wAZ8=
=qMlD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jul-02-2019' into staging
MIPS queue for July 2nd, 2019
# gpg: Signature made Tue 02 Jul 2019 17:09:29 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jul-02-2019:
target/mips: Correct helper for MSA FCLASS.<W|D> instructions
target/mips: Unroll loops for MSA float max/min instructions
target/mips: Correct comments in msa_helper.c
target/mips: Correct comments in translate.c
tcg/tests: target/mips: Correct MSA test compilation and execution order
tcg/tests: target/mips: Amend MSA integer multiply tests
tcg/tests: target/mips: Amend MSA fixed point multiply tests
hw/mips: Express dependencies of the r4k platform with Kconfig
hw/mips: Express dependencies of the Jazz machine with Kconfig
hw/mips: Express dependencies of the MIPSsim machine with Kconfig
hw/mips: Explicit the semi-hosting feature is always required
tests/machine-none: Test recent MIPS cpus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix some errors in comments for MSA helpers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1562068213-11307-6-git-send-email-aleksandar.markovic@rt-rk.com>
Fix some checkpatch comment-related warnings.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1562068213-11307-5-git-send-email-aleksandar.markovic@rt-rk.com>
Move commands query-cpu-definitions, query-cpu-model-baseline,
query-cpu-model-comparison, and query-cpu-model-expansion with their
types from target.json to machine-target.json. Also move types
CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from
misc.json there. Add machine-target.json to MAINTAINERS section
"Machine core".
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Commit message typo fixed]
Fix big endian host behavior for interleave MSA instructions. Previous
fix used TARGET_WORDS_BIGENDIAN instead of HOST_WORDS_BIGENDIAN, which
was a mistake.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-9-git-send-email-aleksandar.markovic@rt-rk.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdDKeRAAoJENSXKoln91pl7OAH/30utWuYrfhakCN2AoYWo4ek
LrodEAQ01rdUBPC87v6no8MFm3ZqdcefOqZcm6OjBUhV5PCzIvb1LiayYNmcNTH6
eGZ5OYCLmR1IU32AeVQVqGDTt5yZMo6csdDVfNXIYmBdibJoqQ7np0wRik5ALQQE
+5dsEpzQ4GdTJp/2BggaYb67Mf0fnPCWstcw/iMuTrxBvyyyNFj88XTKq1SJVxAd
glFLw8iTVfFnsad9xINj/nkUfGKVGG5LTEjv/J0v6RmjWVD1TG5FPH1q4m6tX+Ey
pEY/C4QKl1quJnpQaAdMkfxb8yzKNtCV92f2Oti05/tYoW6BNTDt3GLtsz21j+Y=
=uL8C
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-21-2019' into staging
MIPS queue for June 21st, 2019
# gpg: Signature made Fri 21 Jun 2019 10:46:57 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jun-21-2019:
target/mips: Fix emulation of ILVR.<B|H|W> on big endian host
target/mips: Fix emulation of ILVL.<B|H|W> on big endian host
target/mips: Fix emulation of ILVOD.<B|H|W> on big endian host
target/mips: Fix emulation of ILVEV.<B|H|W> on big endian host
tests/tcg: target/mips: Amend tests for MSA pack instructions
tests/tcg: target/mips: Include isa/ase and group name in test output
target/mips: Fix if-else-switch-case arms checkpatch errors in translate.c
target/mips: Fix some space checkpatch errors in translate.c
MAINTAINERS: Consolidate MIPS disassembler-related items
MAINTAINERS: Update file items for MIPS Malta board
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix emulation of ILVR.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-5-git-send-email-aleksandar.markovic@rt-rk.com>
Fix emulation of ILVL.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-4-git-send-email-aleksandar.markovic@rt-rk.com>
Fix emulation of ILVOD.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-3-git-send-email-aleksandar.markovic@rt-rk.com>
Fix emulation of ILVEV.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-2-git-send-email-aleksandar.markovic@rt-rk.com>
Remove some space-related checkpatch warning.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1561037595-14413-4-git-send-email-aleksandar.markovic@rt-rk.com>
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.
This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().
Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
This macro is now always empty, so remove it. This leaves the
entire contents of CPUArchState under the control of the guest
architecture.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Consolidate some boilerplate from foo_cpu_initfn.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace mips_env_get_cpu with env_archcpu. The combination
CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.
Include this new file from exec/cpu-defs.h.
This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unroll loops in helpers for MSA logic instructions for better
performance.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-5-git-send-email-aleksandar.markovic@rt-rk.com>
Outline places for future MSA helpers to follow the same organization
as in MSA tests.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-4-git-send-email-aleksandar.markovic@rt-rk.com>
Fix block-comment-related issues reported by checkpatch for file
msa_helper.c.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-3-git-send-email-aleksandar.markovic@rt-rk.com>
Fix space-related format issues reported by checkpatch in file
msa_helper.c.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-2-git-send-email-aleksandar.markovic@rt-rk.com>
Remove several minor checkpatch warnings and errors.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-7-git-send-email-aleksandar.markovic@rt-rk.com>
Remove several minor checkpatch warnings and errors.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-6-git-send-email-aleksandar.markovic@rt-rk.com>
Add emulation of MMI instruction PCPYUD. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-4-git-send-email-mateja.marjanovic@rt-rk.com>
Add emulation of MMI instruction PCPYLD. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-3-git-send-email-mateja.marjanovic@rt-rk.com>
Add emulation of MMI instruction PCPYH. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-2-git-send-email-mateja.marjanovic@rt-rk.com>
- semihosting re-factor (used in system tests)
- aarch64 and alpha system tests
- editorconfig tweak for .S
- some docker image updates
- iotests clean-up (without make check inclusion)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlztYToACgkQ+9DbCVqe
KkQU9wf/Uv5qBgDn9MwcCt8tzHTX/i21QHwFLBbCmFoUwZjSridZ2KV6Ma3ig4mF
xY+8Cr5oZT186V+aD39K6KCZKqZRulIpRVNkOKXEfAAklUoAyQs95Wa8F8LtO1eG
vOtOYEdkXQQiAnlnQ+eaGiZQ2mpbCbREa10JrBhxp6iXh0PYcvtD7iAlOldqIvd2
hDRwOgTtYoiiKh6UdediAgQsRvv6oNPHFUOjWgrGxfhPWKbjCVKl7VS4furg9zux
j/S0E0xYKhj+JNq3arjiMUMl19TauCBQLrbQpphd1jOl1s7bELRjAuaKM60TVIbW
Hd2/PYbGnkpyUcJQh0Pr1cb4RMcznw==
=lvtu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging
Various testing updates
- semihosting re-factor (used in system tests)
- aarch64 and alpha system tests
- editorconfig tweak for .S
- some docker image updates
- iotests clean-up (without make check inclusion)
# gpg: Signature made Tue 28 May 2019 17:26:34 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-280519-2: (27 commits)
tests/qemu-iotests: re-format output to for make check-block
tests/qemu-iotests/group: Re-use the "auto" group for tests that can always run
Makefile.target: support per-target coverage reports
Makefile: include per-target build directories in coverage report
Makefile: fix coverage-report reference to BUILD_DIR
.travis.yml: enable aarch64-softmmu and alpha-softmmu tcg tests
tests/tcg/alpha: add system boot.S
tests/tcg/multiarch: expand system memory test to cover more
tests/tcg/minilib: support %c format char
tests/tcg/multiarch: move the system memory test
tests/tcg/aarch64: add system boot.S
editorconfig: add settings for .s/.S files
tests/tcg/multiarch: add hello world system test
tests/tcg/multiarch: add support for multiarch system tests
tests/docker: Test more components on the Fedora default image
tests/docker: add ubuntu 18.04
MAINTAINERS: update for semihostings new home
target/mips: convert UHI_plog to use common semihosting code
target/mips: only build mips-semi for softmmu
target/arm: correct return values for WRITE/READ in arm-semi
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than printing directly to stdout lets use our common
semihosting code. There is one minor difference in that the output
currently defaults to stderr instead of stdout however this can be
controlled by connecting semihosting to a chardev.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The is_uhi gates all semihosting calls and always returns false for
CONFIG_USER_ONLY builds. There is no reason to build and link
mips-semi for these builds so lets fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Realign comments to fix warnings issued by checkpatc.pl tool
"WARNING: Block comments use a leading /* on a separate line"
within "target/mips/cpu.h" file.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190413202818.13622-3-jbi.octave@gmail.com>
Add or remove space to fix errors issued by checkpatch.pl tool
"ERROR: spaces required around that..."
"ERROR: space required after that..."
"ERROR: space required before the open parenthesis"
"ERROR: space required after that..."
"ERROR: space prohibited between function name and open parenthesis"
"ERROR: code indent should never use tabs"
"ERROR: line over 90 characters"
within "target/mips/cpu.h" file.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190413202818.13622-2-jbi.octave@gmail.com>
This commit addresses QEMU Bug #1825311:
mips_cpu_handle_mmu_fault renders all accessed pages executable
It allows finer-grained control over whether the accessed page should
be executable by moving the decision to the underlying map_address
function, which has more information for this.
As a result, pages that have the XI bit set in the TLB and are accessed
for read/write, don't suddenly end up being executable.
Fixes: https://bugs.launchpad.net/qemu/+bug/1825311
Fixes: 2fb58b7374 ('target-mips: add RI and XI fields to TLB entry')
Signed-off-by: Jakub Jermář <jakub.jermar@kernkonzept.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190517123533.868479-1-jakub.jermar@kernkonzept.com>
The old version of the helper for the INSERT.<B|H|W|D> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-6-git-send-email-mateja.marjanovic@rt-rk.com>
The old version of the helper for the COPY_U.<B|H|W> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-5-git-send-email-mateja.marjanovic@rt-rk.com>
The old version of the helper for the COPY_S.<B|H|W|D> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-4-git-send-email-mateja.marjanovic@rt-rk.com>
Fix the case when the host is a big endian machine, and change
the approach toward ST.<B|H|W|D> instruction helpers.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-3-git-send-email-mateja.marjanovic@rt-rk.com>
Fix the case when the host is a big endian machine, and change
the approach toward LD.<B|H|W|D> instruction helpers.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-2-git-send-email-mateja.marjanovic@rt-rk.com>
MSA instructions MOD_<U|S>.<B|H|W|D> when dividing by zero,
didn't return the same value when executed on a referent hardware
(FPGA MIPS 64 r6, little endian) and when executed on QEMU, which
is not a real bug, because the result when dividing by zero is
UNPREDICTABLE [1] (page 255, 256).
[1] MIPS Architecture for Programmers
Volume IV-j: The MIPS64 SIMD
Architecture Module, Revision 1.12
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554207110-9113-3-git-send-email-mateja.marjanovic@rt-rk.com>
MSA instructions DIV_<U|S>.<B|H|W|D> when dividing by zero,
didn't return the same value when executed on a referent hardware
(FPGA MIPS 64 r6, little endian) and when executed on QEMU, which
is not a real bug, because the result when dividing by zero is
UNPREDICTABLE [1] (page 141, 142).
[1] MIPS Architecture for Programmers
Volume IV-j: The MIPS64 SIMD
Architecture Module, Revision 1.12
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554207110-9113-2-git-send-email-mateja.marjanovic@rt-rk.com>
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Note that env->active_tc.PC is removed from the qemu_log as that value
is garbage. The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from do_raise_exception_err.
Cc: Aleksandar Markovic <amarkovic@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the only non-negative TLBRET_* value is TLBRET_MATCH,
the subsequent test for ret < 0 is useless. Use early return
to allow subsequent blocks to be unindented.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At present we give ret = 0, or TLBRET_MATCH. This gets matched
by the default case, which falls through to TLBRET_BADADDR.
However, it makes more sense to use a proper value. All of the
tlb-related exceptions are handled identically in cpu_loop.c,
so TLBRET_BADADDR is as good as any other. Retain it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Set up MMI code to be compiled only for TARGET_MIPS64. This is
needed so that GPRs are 64 bit, and combined with MMI registers,
they will form full 128 bit registers.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551183797-13570-2-git-send-email-mateja.marjanovic@rt-rk.com>
This patch enables QMP-based querying of the available CPU types for
MIPS and MIPS64 platforms.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Introduce MTTCG-enabled QEMU builds for mips32, mipsn32, and mips64.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Hold BQL whenever mips_vpe_wake() is invoked.
Without this patch, MIPS MT with MTTCG enabled triggers an abort in
tcg_handle_interrupt() due to an unlocked access to cpu_interrupt().
This patch makes sure that the BQL is held in this case.
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make sure BQL is held for all interrupt requests.
For MTTCG-enabled configurations, handling soft and hard interrupts
between vCPUs must be properly locked. By acquiring BQL, make sure
all paths triggering an IRQ are synchronized.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Completely rewrite conditional stores handling. Use cmpxchg.
This eliminates need for separate implementations of SC instruction
emulation for user and system emulation.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Do only virtual addresses comaprisons in LL/SC sequence emulations.
Until this patch, physical addresses had been compared in SC part of
LL/SC sequence, even though such comparisons could be avoided. Getting
rid of them allows throwing away SC helpers and having common SC
implementations in user and system mode, avoiding the need for two
separate implementations selected by #ifdef CONFIG_USER_ONLY.
Correct guest software should not rely on LL/SC if they accesses the
same physical address via different virtual addresses or if page
mapping gets changed between LL/SC due to manipulating TLB entries.
MIPS Instruction Set Manual clearly says that an RMW sequence must
use the same address in the LL and SC (virtual address, physical
address, cacheability and coherency attributes must be identical).
Otherwise, the result of the SC is not predictable. This patch takes
advantage of this fact and removes the virtual->physical address
translation from SC helper.
lladdr served as Coprocessor 0 LLAddr register which captures physical
address of the most recent LL instruction, and also lladdr was used
for comparison with following SC physical address. This patch changes
the meaning of lladdr - now it will only keep the virtual address of
the most recent LL. Additionally, CP0_LLAddr field is introduced which
is the actual Coperocessor 0 LLAddr register that guest can access.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add I6500 core configuration. Note that this configuration is
supported only on best-effort basis due to the lack of certain
features in QEMU.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix nanoMIPS branch handling.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Extend gen_scwp() functionality to support EVA by adding an
additional argument, modify internals of the function to handle
new functionality, and accordingly change its invocations.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
"insn_flags" bitfield was expanded from 32-bit to 64-bit in commit
f9c9cd63e3. However, this was not reflected on the second argument
of the function cpu_supports_isa(). By chance, this did not create
some wrong behavior, since the left-most halves of all instances of
the second argument are currently all zeros. However, this is still
a bug waiting to happen. Correct this by changing the type of the
second argument to be always 64-bit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename macros for extracting 3-bit-coded GPR numbers, to achieve
better consistency with the nanoMIPS documentation.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Several macros were defined twice, with identical values, so
remove duplicates.
Previously added in 80845edf37.
This reverts commit 6bfa9f4c9c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The 32 R5900 128-bit registers are split into two 64-bit halves:
the lower halves are the GPRs and the upper halves are accessible
by the R5900-specific multimedia instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename 'rn' to 'register_name' in CP0-related handlers.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add CP0 register MemoryMapID. Only data field is added.
The corresponding functionality will be added in future
patches.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Correct existing CP0-related preprocessor constants (replace
"CPO" with "CP0" (form letter "O" to digit "0", when needed).
Besides, add preprocessor constants for CP0 subregisters.
The names of the subregisters were chosen to be in sync with
the table of corresponding assembler mnemonics found in the
documentation for I6500 and I6400 (release 1.0).
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Update ITU to utilize SAARI and SAAR CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Provide R/W access to SAARI and SAAR CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add fields for SAARI and SAAR CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Use preprocessor constants for 32 major CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add preprocessor constants for 32 major CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move comment containing summary of CP0 registers. Checkpatch
script reported some tabs in the resutling diff, so convert
these tabs to spaces too.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The three-operand MADD and MADDU are specific to R5900 cores.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
The three-operand MADD and MADDU are specific to Sony R5900 core,
and Toshiba TX19/TX39/TX79 cores as well.
The "32-Bit TX System RISC TX39 Family Architecture manual"
is available at https://wiki.qemu.org/File:DSAE0022432.pdf
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé<f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Tested-by: Fredrik Noring <noring@nocrew.org>
Add translation handler for S32ALNI MXU instruction.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add translation handlers for six max/min MXU instructions.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add translation handlers for four logic MXU instructions.
It should be noted that there is an error in MXU documentation (dated
June 2017) regarding opcodes for this group of instructions. This was
confirmed by running tests on hardware, and also by looking up other
related public source trees (binutils, Android NDK). In initial MXU
patches to QEMU, opcodes for MXU logic instructions were created to
be in accordance with the MXU documentation, therefore the error from
was propagated. This patch corrects that, changing the involved code.
Besides that, as MXU was designed and implemented only for 32-bit
CPUs, corresponding preprosessor conditions were added around MXU
code, which allows more flexible implementation of MXU handlers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Improve textual description of MXU extension. These are mostly
comment formatting changes.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add generic naming involving generig suffixes OPTN0, OPTN1, OPTN2,
OPTN3 for four optn2 constants. Existing suffixes WW, LW, HW, XW
are not quite appropriate for some instructions using optn2.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add missing opcodes and decoding engine for LXB, LXH, LXW, LXBU,
and LXHU instructions. They were for some reason forgotten in
previous commits. The MXU opcode list and decoding engine should
be now complete.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Because they are supposed to remain const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable R5900 support. There are some outstanding issues related
to ABI support and emulation accuracy, that were not understood
well during review process. Disable to avoid backward compatibility
issues.
Reverts commit ed4f49ba9b.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename MMI-related functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename MMI-related opcodes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename MMI-related masks.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Explicitely mark handling of PREF instruction for R5900 as
treating the same as NOP.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Avoid using check_opc_user_only() as a decision making code wrt
various architectures. Use ctx->insn_flags checks instead.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
MOVN, MOVZ, MFHI, MFLO, MTHI, MTLO, MULT, MULTU, DIV, DIVU, DMULT,
DMULTU, DDIV, DDIVU and JR are decoded in decode_opc_special_tx79
instead of the generic decode_opc_special_legacy.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
DIV1 and DIVU1 are generated in gen_div1_tx79 instead of the generic
gen_muldiv.
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
MFLO1, MFHI1, MTLO1 and MTHI1 are generated in gen_HILO1_tx79 instead of
the generic gen_HILO.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add prefix, suffix, operation descriptions, and other corrections
and amendments to the comment that describes MXU ASE.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move MXU_EN check to the main MXU decoding function, to avoid code
repetition.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S32LDD and S32LDDR MXU instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Adds support for emulating the Q8MUL and Q8MULSU MXU instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the D16MAC MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the D16MUL MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S8LDD MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move MUL, S32M2I, S32I2M handling out of switch. These are all
instructions that do not depend on MXU_EN flag of MXU_CR.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S32I2M and S32M2I MXU instructions.
This commit also contains utility functions for reading/writing
to MXU registers. This is required for overall MXU instruction
support.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add bit encoding for MXU execute 2-bit add/subtract pattern 'eptn2'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add bit encoding for MXU accumulate add/subtract 1-bit pattern
'aptn1'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add MXU decoding engine: add handlers for all instruction pools,
and main decode handler. The handlers, for now, for the purpose
of this patch, contain only sceleton in the form of a single
switch statement.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Provide the placeholder and add the invocation logic for MXU
decoding engine.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Amend MXU instruction opcodes. Pool04 is actually only instruction
OPC_MXU_S16MAD. Two cases within S16MAD are recognized by 1-bit
subfield 'aptn1'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Define a bit for MXU in insn_flags. This is the first non-MIPS
(third party) ASE supported in QEMU for MIPS, so it is placed in
the section "bits 56-63: vendor-specific ASEs".
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Define and initialize the 16 MXU registers - 15 general computational
register, and 1 control register). There is also a zero register, but
it does not have any corresponding variable.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Coverity found two fallthroughs that miss break statement. Fix them.
Revieved-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add disassembler support for nanoMIPS.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Implement emulation of nanoMIPS EVA instructions. They are all
part of P.LS.E0 instruction pool, or one of its subpools.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Opcode for ALIGN and DALIGN must be in fact ranges of opcodes, to
allow paremeter 'bp' to occupy two and three bits, respectively.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Replace MIPS32 with MIPS, since the file covers all generations
of MIPS architectures.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The primary purpose of this change is to support programs compiled by
GCC for the R5900 target and thereby run R5900 Linux distributions, for
example Gentoo.
GCC in version 7.3, by itself, by inspection of the GCC source code
and inspection of the generated machine code, for the R5900 target,
only emits two instructions that are specific to the R5900: the three-
operand MULT and MULTU. GCC and libc also emit certain MIPS III
instructions that are not part of the R5900 ISA. They are normally
trapped and emulated by the Linux kernel, and therefore need to be
treated accordingly by QEMU.
A program compiled by GCC is taken to mean source code compiled by GCC
under the restrictions above. One can, with the apparent limitations,
with a bit of effort obtain a fully functioning operating system such
as R5900 Gentoo. Strictly speaking, programs need not be compiled by
GCC to make use of this change.
Instructions and other facilities of the R5900 not implemented by this
change are intended to signal provisional exceptions. One such example
is the FPU that is not compliant with IEEE 754-1985 in system mode. It
is therefore provisionally disabled. In user space the FPU is trapped
and emulated by IEEE 754-1985 compliant software in the kernel, and
this is handled accordingly by QEMU. Another example is the 93
multimedia instructions specific to the R5900 that generate provisional
reserved instruction exception signals.
One of the benefits of running a Linux distribution under QEMU is that
programs can be compiled with a native compiler, where the host and
target are the same, as opposed to a cross-compiler, where they are
not the same. This is especially important in cases where the target
hardware does not have the resources to run a native compiler.
Problems with cross-compilation are often related to host and target
differences in integer sizes, pointer sizes, endianness, machine code,
ABI, etc. Sometimes cross-compilation is not even supported by the
build script for a given package. One effective way to avoid those
problems is to replace the cross-compiler with a native compiler. This
change of compilation methods does not resolve the inherent problems
with cross-compilation.
The native compiler naturally replaces the cross-compiler, because one
typically uses one or the other, and preferably the native compiler
when the circumstances admit this. The native compiler is also a good
test case for the R5900 QEMU user mode. Additionally, Gentoo is well-
known for compiling and installing its packages from sources.
This change has been tested with Gentoo compiled for R5900, including
native compilation of several packages under QEMU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The Linux kernel traps certain reserved instruction exceptions to
emulate the corresponding instructions. QEMU plays the role of the
kernel in user mode, so those traps are emulated by accepting the
instructions.
This change adds the function check_insn_opc_user_only to signal a
reserved instruction exception for flagged CPUs in QEMU system mode.
The MIPS III instructions DMULT[U], DDIV[U], LL[D] and SC[D] are not
implemented in R5900 hardware. They are trapped and emulated by the
Linux kernel and, accordingly, therefore QEMU user only instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The R5900 is taken to be MIPS III with certain modifications. From
MIPS IV it implements the instructions MOVN, MOVZ and PREF.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for DIV1 and DIVU1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for MFLO1, MTLO1, MFHI1 and MTHI1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for MULT1 and MULTU1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The three-operand MULT and MULTU are the only R5900-specific
instructions emitted by GCC 7.3. The R5900 also implements the three-
operand MADD and MADDU instructions, but they are omitted in QEMU for
now since they are absent in programs compiled by current GCC versions.
Likewise, the R5900-specific pipeline 1 instruction variants MULT1,
MULTU1, DIV1, DIVU1, MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1
are omitted here as well.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a placeholder for MMI3 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a placeholder for MMI2 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a placeholder for MM1 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a placeholder for MMI0 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a placeholder for MMI class. This is the main palceholder for
MMI ASE.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a placeholder for LQ instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add placeholder for SQ instruction, handle RDHWR.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add definition of MI0 opcodes.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Define MMI0, MMI1, MMI2, MMI3 subclass opcodes, and other opcodes of
instructions in MMI class.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Define MMI class, LQ, and SQ R5900 opdoces.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment on R5900 MMI ASE (short overview).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The R5900 implements the 64-bit MIPS III instruction set except
DMULT, DMULTU, DDIV, DDIVU, LL, SC, LLD and SCD. The MIPS IV
instructions MOVN, MOVZ and PREF are implemented. It has the
R5900-specific three-operand instructions MADD, MADDU, MULT and
MULTU as well as pipeline 1 versions MULT1, MULTU1, DIV1, DIVU1,
MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1. A set of 93 128-bit
multimedia instructions specific to the R5900 is also implemented.
The Toshiba TX System RISC TX79 Core Architecture manual:
https://wiki.qemu.org/File:C790.pdf
describes the C790 processor that is a follow-up to the R5900. There
are a few notable differences in that the R5900 FPU
- is not IEEE 754-1985 compliant,
- does not implement double format, and
- its machine code is nonstandard.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix misplaced 'break' in handling of NM_SHRA_R_PH. Found by
Coverity (CID 1395627).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S> instructions.
Their handling was permuted.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Implement hardware page table walker. This implementation is
limiter only to MIPS32.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add reset state for PWSize and PWField registers. The reset state
is different for pre-R6 and R6 (and post-R6) ISAa.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add PWCtl register (CP0 Register 5, Select 6).
The PWCtl register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
PWEn (31) - Hardware Page Table walker enable
PWDirExt (30) - If 1, 4-th level implemented (MIPS64 only)
XK (28) - If 1, walker handles xkseg (MIPS64 only)
XS (27) - If 1, walker handles xsseg (MIPS64 only)
XU (26) - If 1, walker handles xuseg (MIPS64 only)
DPH (7) - Dual Page format of Huge Page support
HugePg (6) - Huge Page PTE supported in Directory levels
PSn (5..0) - Bit position of PTEvld in Huge Page PTE
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add PWSize register (CP0 Register 5, Select 7).
The PWSize register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
BDW (37..32) Base Directory index width (MIPS64 only)
GDW (29..24) Global Directory index width
UDW (23..18) Upper Directory index width
MDW (17..12) Middle Directory index width
PTW (11..6 ) Page Table index width
PTEW ( 5..0 ) Left shift applied to the Page Table index
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add PWField register (CP0 Register 5, Select 6).
The PWField register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
MIPS64:
BDI (37..32) - Base Directory index
GDI (29..24) - Global Directory index
UDI (23..18) - Upper Directory index
MDI (17..12) - Middle Directory index
PTI (11..6 ) - Page Table index
PTEI ( 5..0 ) - Page Table Entry shift
MIPS32:
GDW (29..24) - Global Directory index
UDW (23..18) - Upper Directory index
MDW (17..12) - Middle Directory index
PTW (11..6 ) - Page Table index
PTEW ( 5..0 ) - Page Table Entry shift
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add PWBase register (CP0 Register 5, Select 5).
The PWBase register contains the Page Table Base virtual address.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add field corresponding to CP0 Config2 to DisasContext. This is
needed for availability control via Config2 bits.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Do following replacements:
ASE_DSPR2 -> ASE_DSP_R2
ASE_DSPR3 -> ASE_DSP_R3
MIPS_HFLAG_DSPR2 -> MIPS_HFLAG_DSP_R2
MIPS_HFLAG_DSPR3 -> MIPS_HFLAG_DSP_R3
check_dspr2() -> check_dsp_r2()
check_dspr3() -> check_dsp_r3()
and several other similar minor replacements.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add infrastructure for availability control for DSP R3 ASE MIPS
instructions. Only BPOSGE32C currently belongs to DSP R3 ASE, but
this is likely to be changed in near future.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add DSP R3 ASE related bit definition for insn_flags and hflags.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Increase the size of insn_flags holder size to 64 bits. This is
needed for future extensions since existing bits are almost all used.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add opcode values for all instructions in MXU ASE.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment that contains an organizational chart of MXU ASE
instructions.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment that contains a list all MXU instructions,
expressed in assembler mnemonics.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment that contains a basic description of MXU ASE.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment before each CP0 register section in CPUMIPSState
definition, thus visually separating these sections.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment with an overview of CP0 registers close to the
definition of their corresponding fields in CPUMIPSState.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add definition of the first nanoMIPS processor in QEMU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Fix ERET/ERETNC so that ADEL exception can be raised.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Update BadInstr and BadInstrX registers for nanoMIPS. The same
support for pre-nanoMIPS remains unimplemented.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
A set of nanoMIPS instructions is not available if Config5 bit NMS
is set.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add emulation of DSP ASE instructions for nanoMIPS - part 6.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Aleksandar Markovic