Commit Graph

27015 Commits (d0a92b353efa2ca3c2847ad38f088b16d1278290)

Author SHA1 Message Date
Philippe Mathieu-Daudé 1acb1fe166 hw/char/serial: Remove old DEBUG_SERIAL commented code
All useful DPRINTF() calls have been converted to trace
events.  Remove a pointless one in the IOEventHandler,
and drop the DEBUG_SERIAL ifdef'ry.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200907015535.827885-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Philippe Mathieu-Daudé 4d7b9a6373 hw/char/serial: Replace commented DPRINTF() by trace event
Convert the old debug PRINTF() call to display the UART
baudrate to a trace event.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200907015535.827885-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Philippe Mathieu-Daudé 6ab9be1ec1 hw/char/serial: Assert serial_ioport_read/write offset fits 8 bytes
The serial device has 8 registers, each 8-bit. The MemoryRegionOps
'serial_io_ops' is initialized with max_access_size=1, and all
memory_region_init_io() callers correctly set the region size to
8 bytes:
- serial_io_realize
- serial_isa_realizefn
- serial_pci_realize
- multi_serial_pci_realize

It is safe to assert the offset argument of serial_ioport_read()
and serial_ioport_write() is always less than 8.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907015535.827885-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Philippe Mathieu-Daudé 0851611530 hw/char/serial: Remove TYPE_SERIAL_IO
TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, and it is
not used anymore. Remove it.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907011538.818996-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Philippe Mathieu-Daudé cf3d932f97 hw/mips/mipssim: Use MMIO serial device on fake ISA I/O
The 'mipssim' is not a real hardware, it is a simulator.

There is an ISA MMIO space mapped at 0x1fd00000, however
this is not a real ISA bus (no ISA IRQ). So can not use
the TYPE_ISA_SERIAL device...
Instead we have been using a plain MMIO device, but named
it IO.

TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, using
regshift=0 and endianness=DEVICE_LITTLE_ENDIAN.

Directly use the TYPE_SERIAL_MM device, enforcing the
regshift/endianness values. 'regshift' default is already
'0'. 'endianness' is meaningless for 8-bit accesses.

This change breaks migration back compatibility, but
this is not an issue for the mipssim machine.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200907011538.818996-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Igor Mammedov 270b33cc1c numa: remove fixup numa_state->num_nodes to MAX_NODES
current code permits only nodeids in [0..MAX_NODES) range
due to nodeid check in

  parse_numa_node()
      if (nodenr >= MAX_NODES) {
          error_setg(errp, "Max number of NUMA nodes reached: %"

so subj fixup is not reachable, drop it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-4-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Igor Mammedov b21aa7e01e numa: drop support for '-numa node' (without memory specified)
it was deprecated since 4.1
commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes)

Users of existing VMs, wishing to preserve the same RAM distribution,
should configure it explicitly using ``-numa node,memdev`` options.
Current RAM distribution can be retrieved using HMP command
`info numa` and if separate memory devices (pc|nv-dimm) are present
use `info memory-device` and subtract device memory from output of
`info numa`.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Jon Doron 8f814ea1a2 acpi: i386: Move VMBus DSDT entry to SB
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200715084326.678715-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Li Feng b82526c7ee vhost-scsi: support inflight io track
Qemu will send GET_INFLIGHT_FD and SET_INFLIGH_FD to backend, and
the backend setup the inflight memory to track the io.

Change-Id: I805d6189996f7a1b44c65f0b12ef7473b1789510
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20200909122021.1055174-1-fengli@smartx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
Gerd Hoffmann 55c2f967c1 acpi/gpex: no reason to use a method for _CRS
... just to return something which is constant anyway.

-            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
-            {
-                Return (ResourceTemplate ()
-                {
-                    WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
[ ... ]

+            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+            {
+                WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
[ ... ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-12-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
Gerd Hoffmann 8c2d9f9a38 microvm/pcie: add 64bit mmio window
Place the 64bit window at the top of the physical address space, assign
25% of the avaiable address space.  Force cpu.host-phys-bits=on for
microvm machine typs so this actually works reliable.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-7-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
Gerd Hoffmann 24db877ab6 microvm: add pcie support
Uses the existing gpex device which is also used as pcie host bridge on
arm/aarch64.  For now only a 32bit mmio window and no ioport support.

It is disabled by default, use "-machine microvm,pcie=on" to enable.
ACPI support must be enabled too because the bus is declared in the
DSDT table.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-6-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
Gerd Hoffmann 06d2dd4911 arm: use acpi_dsdt_add_gpex
Fill gpex config struct from memory map, then call the new
acpi_dsdt_add_gpex helper function.  No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-4-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
Gerd Hoffmann 5b85eabe68 acpi: add acpi_dsdt_add_gpex
Add helper function to generate dsdt aml code for the gpex pci host.
Largely copied from arm/virt.  Configuration is handled by passing
a config struct instead of looked up from memory map.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-3-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
Gerd Hoffmann 52f5903a27 move MemMapEntry
It is defined twice already.  Move to a common header file to
remove duplication and make it available to everybody.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-2-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
Philippe Mathieu-Daudé 61c7f9876a qapi: Extract PCI commands to 'pci.json'
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the PCI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-9-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé 27c9188fa0 qapi: Extract ACPI commands to 'acpi.json'
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé b495ec6c5e qapi: Restrict device memory commands to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the memory commands to machine.json pulls less
QAPI-generated code into user-mode.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-7-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé db0f08df59 qapi: Restrict query-vm-generation-id command to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the query-vm-generation-id command to machine.json pulls
less QAPI-generated code into user-mode.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-5-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Philippe Mathieu-Daudé a83e24ba1a qapi: Restrict balloon-related commands to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.

Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Philippe Mathieu-Daudé 8dc007d3d9 qapi: Restrict LostTickPolicy enum to machine code
Restricting LostTickPolicy to machine.json pulls slightly less
QAPI-generated code into user-mode.

Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-2-philmd@redhat.com>
[Add rationale to commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Peter Maydell 5663ac2aa0 virtio-vga: reset fix, bigendian fix.
virtio-vga+spice: set monitor dimension via edid.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCgAGBQJfcwTtAAoJEEy22O7T6HE46FYP+wSv4WscQ3iKNKVva8ZCip6V
 rd5D2UkI0/m6YUPCh0Ql0YdicakDmaMbDy0KMTCx4XTN60Sz66vn882eS0MMdGWp
 x8H8lh0irssrilgczVDM23aLtDxHM8mHomLDcRaHiq4imGBPZkPZYJ1oyUrWsvzd
 6oumi6ysy2k6e3r2A6/hCpFDZUaXFO63+Z28BXhK6P5w5cnKzqhDKKN44Ux9Feyk
 YqJtVSqXMy7Pc1JEhNGYIz0XrGJuIDVcd7QqrH1O1GDKXj5E7+LAOzC+Vz6zWs/O
 d5PldX8YHk21qWxnIl+1HHSk8ktSVz84shfl2gKMrDxSz12F25/FHPi1LZUJheNT
 8OOtxuatA1y8JLw5q+UOMU7a08avEcvfQ8cVpl4pGNpvZpFpd2O/KK6Bor5zrpSt
 m33dpa+K2tlE6m83YMx1tJXrrBhTUP0MWz8hEM9W40zuR+RjLRe3oGIPNkAnqYUo
 8auLgV0zndzO77RPnbvr+JXSk/RR0E8qroTeT8QoKNi5TVbf4ZEIfwsH0DjR7U7Q
 M7ZP0kGIKNpuMl9Gbrhp0wiZbI5CzposrBKv8BeSOR4zHUb8CWJeTRJZDbitNW4x
 3JhgTSl4NtAsoLzPm1gvuWwJ3p0hhLmeCOZeWM1PnRs+R0TWOCWnXIn2iQA8gyHE
 XTZMJ1e90o7XaGwF9RWW
 =IMNR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200929-pull-request' into staging

virtio-vga: reset fix, bigendian fix.
virtio-vga+spice: set monitor dimension via edid.

# gpg: Signature made Tue 29 Sep 2020 10:57:01 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20200929-pull-request:
  ppc/pseries: enable big-endian-framebuffer quirk for bochs-display and virtio-vga
  virtio-vga: implement big-endian-framebuffer property
  virtio-gpu: set physical dimensions for EDID
  spice: get monitors physical dimension
  spice: remove the single monitor config logic
  ui: add getter for UIInfo
  edid: use physical dimensions if available
  edid: fix physical display size computation
  virtio-gpu-3d: fix abnormal display after a warm reboot

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-29 12:03:06 +01:00
Peter Maydell 213057383c virtio,pc,acpi: fixes, tests
Fixes and tests all over the place.
 Batch iommu updates for vdpa.
 Removal of deprecated cpu hotplug commands.
 SMBIOS OEM string support.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl9y3aEPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpIgIH/2jGMi7hJ4CEs36pNdxaTfaTsX9IzlTv3/jb
 ZuC3VV1PAdXyg0Z29QG0dzCkngN+D5ikC2KrBwUibKqBq6PqYie0dZYUYM5aEr/D
 0v+afBBJkLtyOonLe3cG36D3cy7BeGpzXnNhm5muSl0+zaRutreWULMlF6sTmtMh
 Vc/bp06IWdgj5eCp8cNzHItuzHtzXIrLsNuO2UDFPg/LFPl0gEcqXFDCB/9N6AfV
 4D4XIXtWRd3umzQci0JNQUDDq5NTWnWaZDrK+6jeAhMfYFCYMxZqyT2AsEn636wm
 H7klBm2Zs6gcLUX6on4RtALKyWAxRMWQenaJ4tjIB9QO2+7LsaE=
 =3BXA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc,acpi: fixes, tests

Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 29 Sep 2020 08:09:21 BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (48 commits)
  libvhost-user: return on error in vu_log_queue_fill()
  libvhost-user: return early on virtqueue errors
  hw: virtio-pmem: detach the element fromt the virtqueue when error occurs
  tests/acpi: update golden master DSDT binary table blobs for q35
  piix4: don't reserve hw resources when hotplug is off globally
  Add ACPI DSDT tables for q35 that are being updated by the next patch
  tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
  tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
  tests/acpi: list added acpi table binary file for pci bridge hotplug test
  i440fx/acpi: do not add hotplug related amls for cold plugged bridges
  Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
  tests/acpi: add a new ACPI table in order to test root pci hotplug on/off
  tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
  tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
  vhost-user: save features of multiqueues if chardev is closed
  qemu-options: document SMBIOS type 11 settings
  hw/smbios: report error if table size is too large
  hw/smbios: support loading OEM strings values from a file
  tests: acpi: update acpi blobs with new AML
  x68: acpi: trigger SMI before sending hotplug Notify event to OSPM
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-29 11:10:29 +01:00
Gerd Hoffmann 97a0530bb7 ppc/pseries: enable big-endian-framebuffer quirk for bochs-display and virtio-vga
Already done for stdvga and secondary-vga, bochs-display and virtio-vga
support the big-endian-framebuffer property too.  Fixes blue console
background at boot (offb firmware console).

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1881912
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-3-kraxel@redhat.com
2020-09-29 10:08:25 +02:00
Gerd Hoffmann 8be61ce2ce virtio-vga: implement big-endian-framebuffer property
Allows to switch the (vga mode) framebuffer into bigendian mode
by setting the property, simliar to stdvga.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-2-kraxel@redhat.com
2020-09-29 10:08:25 +02:00
Marc-André Lureau 4bf47f3634 virtio-gpu: set physical dimensions for EDID
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-7-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-29 10:08:25 +02:00
Marc-André Lureau fd36eade01 edid: use physical dimensions if available
Replace dpi with width_mm/height_mm in qemu_edid_info.

Use it when set (non-zero) to compute the DPI and generate the EDID.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-29 10:08:25 +02:00
Marc-André Lureau 6c8f847ac1 edid: fix physical display size computation
Divide the resolution by the DPI, and multiply to mm.

Note the computation done for edid[21/22] is correct (in cm).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-29 10:08:25 +02:00
Guoqing Zhang 3745d59ee4 virtio-gpu-3d: fix abnormal display after a warm reboot
When resetting virtio-gpu, virgl_renderer_reset() should be
called to ensure that the virglrenderer status is correct.

Signed-off-by: Guoqing Zhang <zhangguoqing.kernel@bytedance.com>
Reviewed-by: Qi Liu<liuqi.16@bytedance.com>
Message-id: 20200918111632.37354-1-zhangguoqing.kernel@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-29 10:08:25 +02:00
Li Qiang 2bc9e0da57 hw: virtio-pmem: detach the element fromt the virtqueue when error occurs
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.

Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200813165125.59928-1-liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5f503cd9f3 ("virtio-pmem: add virtio device")
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
2020-09-29 03:06:12 -04:00
Ani Sinha df4008c9c5 piix4: don't reserve hw resources when hotplug is off globally
When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.

In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.

As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:

 tests/data/acpi/q35/DSDT
 tests/data/acpi/q35/DSDT.acpihmat
 tests/data/acpi/q35/DSDT.bridge
 tests/data/acpi/q35/DSDT.cphp
 tests/data/acpi/q35/DSDT.dimmpxm
 tests/data/acpi/q35/DSDT.ipmibt
 tests/data/acpi/q35/DSDT.memhp
 tests/data/acpi/q35/DSDT.mmio64
 tests/data/acpi/q35/DSDT.numamem
 tests/data/acpi/q35/DSDT.tis

These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-11-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 03:06:12 -04:00
Ani Sinha 15a5b25408 i440fx/acpi: do not add hotplug related amls for cold plugged bridges
Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.

In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.

As a result of the patch, the following are the changes to the DSDT ACPI
table:

@@ -858,38 +858,33 @@
                     Return (Zero)
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }

             Device (S18)
             {
-                Name (_SUN, 0x03)  // _SUN: Slot User Number
                 Name (_ADR, 0x00030000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
             }

             Device (S20)
             {
                 Name (_SUN, 0x04)  // _SUN: Slot User Number
                 Name (_ADR, 0x00040000)  // _ADR: Address
                 Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                 {
                     PCEJ (BSEL, _SUN)
                 }
             }

             Device (S28)
             {
                 Name (_SUN, 0x05)  // _SUN: Slot User Number
                 Name (_ADR, 0x00050000)  // _ADR: Address
@@ -1148,37 +1143,32 @@
                     PCEJ (BSEL, _SUN)
                 }
             }

             Device (SF8)
             {
                 Name (_SUN, 0x1F)  // _SUN: Slot User Number
                 Name (_ADR, 0x001F0000)  // _ADR: Address
                 Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                 {
                     PCEJ (BSEL, _SUN)
                 }
             }

             Method (DVNT, 2, NotSerialized)
             {
-                If ((Arg0 & 0x08))
-                {
-                    Notify (S18, Arg1)
-                }
-
                 If ((Arg0 & 0x10))
                 {
                     Notify (S20, Arg1)
                 }

                 If ((Arg0 & 0x20))
                 {
                     Notify (S28, Arg1)
                 }

                 If ((Arg0 & 0x40))
                 {
                     Notify (S30, Arg1)
                 }

                 If ((Arg0 & 0x80))

While at it, I have also updated a stale comment.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Suggested-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 03:06:12 -04:00
Ani Sinha 8ad038abb9 Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:

3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus").

As a result, when acpi_pcihp_find_hotplug_bus() is called
with bsel set to 0, it may return the root bus. This can cause devices
attached to the root bus to get hot-unplugged if the user issues the following
set of commmands:

outl 0xae10 0
outl 0xae08 your_slot

Thanks to Julia for pointing this out here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html

In this patch, we fix the issue in this function by checking if the bus which
is returned by the function is actually hotpluggable. If not, we simply return
NULL. This avoids the scenario where we were returning a non-hotpluggable bus.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 03:06:12 -04:00
Daniel P. Berrangé 10c3666658 hw/smbios: report error if table size is too large
The SMBIOS 2.1 entry point uses a uint16 data type for reporting the
total length of the tables. If the user passes -smbios configuration to
QEMU that causes the table size to exceed this limit then various bad
behaviours result, including

 - firmware hangs in an infinite loop
 - firmware triggers a KVM crash on bad memory access
 - firmware silently discards user's SMBIOS data replacing it with
   a generic data set.

Limiting the size to 0xffff in QEMU avoids triggering most of these
problems. There is a remaining bug in SeaBIOS which tries to prepend its
own data for table 0, and does not check whether there is sufficient
space before attempting this.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-3-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Daniel P. Berrangé bb99f4772f hw/smbios: support loading OEM strings values from a file
Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.

This introduces the "path" parameter allowing for:

  $ echo -n "thisthing" > mydata.txt
  $ qemu-system-x86_64 \
    -smbios type=11,value=something \
    -smbios type=11,path=mydata.txt \
    -smbios type=11,value=somemore \
    ...other args...

Now in the guest

$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.

Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
	String 1: something
	String 2: thisthing
	String 3: somemore

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-2-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Igor Mammedov 9cc5a90b0e x68: acpi: trigger SMI before sending hotplug Notify event to OSPM
In case firmware has negotiated CPU hotplug SMI feature, generate
AML to describe SMI IO port region and send SMI to firmware
on each CPU hotplug SCI in case new CPUs were hotplugged.

Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running
we can't send SMI before new CPUs are fetched from QEMU as it
could cause sending Notify to a CPU that firmware hasn't seen yet.
So fetch new CPUs into local cache first, then send SMI and
after that send Notify events to cached CPUs. This should ensure
that Notify is sent only to CPUs which were processed by firmware
first.
Any CPUs that were hotplugged after caching will be processed
by the next CPU_SCAN_METHOD, when pending SCI is handled.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Igor Mammedov 998ba95016 x86: acpi: introduce the PCI0.SMI0 ACPI device
When CPU hotplug with SMI has been negotiated, describe the SMI
register block in the DSDT. Pass the ACPI name of the SMI control
register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the
register in the next patch.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Igor Mammedov 6d837f1f38 x86: acpi: introduce AcpiPmInfo::smi_on_cpuhp
Translate the "CPU hotplug with SMI" feature bit, from the property
added in the last patch, to a dedicated boolean in AcpiPmInfo.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Igor Mammedov eb8f7f9178 x86: ich9: expose "smi_negotiated_features" as a QOM property
Expose the "smi_negotiated_features" field of ICH9LPCState as
a QOM property.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Igor Mammedov 5776fa998d acpi: add aml_land() and aml_break() primitives
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Igor Mammedov b48ad7c02b x86: cpuhp: refuse cpu hot-unplug request earlier if not supported
CPU hot-unplug with SMM requires firmware participation to prevent
guest crash (i.e. CPU can be removed only after OS _and_ firmware
were prepared for the action).
Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT
feature bit, which is advertised by firmware when it has support
for CPU hot-unplug. Use it to check if guest is able to handle
unplug and make device_del fail gracefully if hot-unplug feature
hasn't been negotiated.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Igor Mammedov c5be7517d6 x86: cpuhp: prevent guest crash on CPU hotplug when broadcast SMI is in use
There were reports of guest crash on CPU hotplug, when using q35 machine
type and OVMF with SMM, due to hotplugged CPU trying to process SMI at
default SMI handler location without it being relocated by firmware first.

Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with
SMI support while SMI broadcast is in use.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-3-imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Igor Mammedov 00dc02d284 x86: lpc9: let firmware negotiate 'CPU hotplug with SMI' features
It will allow firmware to notify QEMU that firmware requires SMI
being triggered on CPU hot[un]plug, so that it would be able to account
for hotplugged CPU and relocate it to new SMM base and/or safely remove
CPU on unplug.

Using negotiated features, follow up patches will insert SMI upcall
into AML code, to make sure that firmware processes hotplug before
guest OS would attempt to use new CPU.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Li Qiang 2d69eba5fe virtio: update MemoryRegionCaches when guest set bad features
Current the 'virtio_set_features' only update the 'MemorRegionCaches'
when the 'virtio_set_features_nocheck' return '0' which means it is
not bad features. However the guest can still trigger the access of the
used vring after set bad features. In this situation it will cause assert
failure in 'ADDRESS_SPACE_ST_CACHED'.

Buglink: https://bugs.launchpad.net/qemu/+bug/1890333
Fixes: db812c4073 ("virtio: update MemoryRegionCaches when guest negotiates features")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200919082706.6703-1-liq3ea@163.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Stefano Garzarella a6704a34cf vhost-vsock-ccw: force virtio version 1
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 as done for vhost-vsock-pci.

To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).

Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-5-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Stefano Garzarella 27eda699f5 vhost-user-vsock-pci: force virtio version 1
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-user-vsock-pci device:

    $ ./qemu-system-x86_64 ... \
    -chardev socket,id=char0,reconnect=0,path=/tmp/vhost4.socket \
    -device vhost-user-vsock-pci,chardev=char0
        qemu-system-x86_64: -device vhost-user-vsock-pci,chardev=char0:
        device is modern-only, use disable-legacy=on

virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 and removes the 'transitional_name'
property, as done for vhost-vsock-pci, removing the need to specify
'disable-legacy=on' on vhost-user-vsock-pci device.

Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-4-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Stefano Garzarella 6209070503 vhost-vsock-pci: force virtio version 1
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-vsock-pci device:

    $ ./qemu-system-x86_64 ... -device vhost-vsock-pci,guest-cid=5
        qemu-system-x86_64: -device vhost-vsock-pci,guest-cid=5:
        device is modern-only, use disable-legacy=on

virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
In addition Cornelia verified that forcing a legacy mode on
vhost-vsock-pci device using x86-64 host and s390x guest, so with
different endianness, produces strange behaviours.

This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
vhost-vsock-pci device.

To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).

As the transitional device name is not commonly used, we do not
provide compatibility handling for it.

Cc: qemu-stable@nongnu.org
Reported-by: Qian Cai <caiqian@redhat.com>
Reported-by: Qinghua Cheng <qcheng@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1868449
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Stefano Garzarella d55f518248 virtio: skip legacy support check on machine types less than 5.1
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally
on") added a check that returns an error if legacy support is on, but the
device does not support legacy.

Unfortunately some devices were wrongly declared legacy capable even if
they were not (e.g vhost-vsock).

To avoid migration issues, we add a virtio-device property
(x-disable-legacy-check) to skip the legacy error, printing a warning
instead, for machine types < 5.1.

Cc: qemu-stable@nongnu.org
Fixes: 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on")
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:24 -04:00
Laurent Vivier 778e67de4c vhost-vdpa: add trace-events
Add trace functions in vhost-vdpa.c.

All traces from this file can be enabled with '-trace vhost_vdpa*'.

Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-3-lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:15:20 -04:00
Pankaj Gupta f68ec01fe9 virtio-pmem-pci: force virtio version 1
Qemu fails with below error when trying to run with virtio pmem:

 (qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1:
  device is modern-only, use disable-legacy=on

 This patch fixes this by forcing virtio 1 with virtio-pmem.

fixes: adf0748a49 ("virtio-pci: Proxy for virtio-pmem")
Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Message-Id: <20200925102251.7216-1-pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:30 -04:00
Eric Auger 8f39562a1b virtio-iommu-pci: force virtio version 1
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on virtio-iommu-pci:

qemu-system-aarch64: -device virtio-iommu-pci: device is modern-only,
use disable-legacy=on

virtio-iommu was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
virtio-iommu-pci device.

Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Message-Id: <20200908193309.20569-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:30 -04:00
Eric Auger 59bf980d22 virtio-iommu: Check gtrees are non null before destroying them
If realize fails, domains and endpoints trees may be NULL. On
unrealize(), this produces assertions:

"GLib: g_tree_destroy: assertion 'tree != NULL' failed"

Check that the trees are non NULL before destroying them.

Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Message-Id: <20200908193309.20569-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:30 -04:00
Igor Mammedov 63e79833c4 cphp: remove deprecated cpu-add command(s)
These were deprecated since 4.0, remove both HMP and QMP variants.

Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:30 -04:00
Dima Stepanov 1e5a050f57 vhost: check queue state in the vhost_dev_set_log routine
If the vhost-user-blk daemon provides only one virtqueue, but device was
added with several queues, then QEMU will send more VHOST-USER command
than expected by daemon side. The vhost_virtqueue_start() routine
handles such case by checking the return value from the
virtio_queue_get_desc_addr() function call. Add the same check to the
vhost_dev_set_log() routine.

Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:29 -04:00
Dima Stepanov f5b22d06fb vhost: recheck dev state in the vhost_migration_log routine
vhost-user devices can get a disconnect in the middle of the VHOST-USER
handshake on the migration start. If disconnect event happened right
before sending next VHOST-USER command, then the vhost_dev_set_log()
call in the vhost_migration_log() function will return error. This error
will lead to the assert() and close the QEMU migration source process.
For the vhost-user devices the disconnect event should not break the
migration process, because:
  - the device will be in the stopped state, so it will not be changed
    during migration
  - if reconnect will be made the migration log will be reinitialized as
    part of reconnect/init process:
    #0  vhost_log_global_start (listener=0x563989cf7be0)
    at hw/virtio/vhost.c:920
    #1  0x000056398603d8bc in listener_add_address_space (listener=0x563989cf7be0,
        as=0x563986ea4340 <address_space_memory>)
    at softmmu/memory.c:2664
    #2  0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0,
        as=0x563986ea4340 <address_space_memory>)
    at softmmu/memory.c:2740
    #3  0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8,
        opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER,
        busyloop_timeout=0)
    at hw/virtio/vhost.c:1385
    #4  0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990)
    at hw/block/vhost-user-blk.c:315
    #5  0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990,
        event=CHR_EVENT_OPENED)
    at hw/block/vhost-user-blk.c:379
Update the vhost-user-blk device with the internal started_vu field which
will be used for initialization (vhost_user_blk_start) and clean up
(vhost_user_blk_stop). This additional flag in the VhostUserBlk structure
will be used to track whether the device really needs to be stopped and
cleaned up on a vhost-user level.
The disconnect event will set the overall VHOST device (not vhost-user) to
the stopped state, so it can be used by the general vhost_migration_log
routine.
Such approach could be propogated to the other vhost-user devices, but
better idea is just to make the same connect/disconnect code for all the
vhost-user devices.

This migration issue was slightly discussed earlier:
  - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html
  - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html

Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <9fbfba06791a87813fcee3e2315f0b904cc6789a.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:29 -04:00
David Hildenbrand d110b6b4d6 pc: fix auto_enable_numa_with_memhp/auto_enable_numa_with_memdev for the 5.0 machine
Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.

Cc: qemu-stable@nongnu.org # v5.1
Fixes: 195784a0cf (numa: Auto-enable NUMA when any memory devices are possible)
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200820094828.30348-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:29 -04:00
Li Qiang 0c404e45c5 virtio-mem: detach the element from the virtqueue when error occurs
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.

Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200816142245.17556-1-liq3ea@163.com>
Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:29 -04:00
Jason Wang a5bd05800f vhost-vdpa: batch updating IOTLB mappings
To speed up the memory mapping updating between vhost-vDPA and vDPA
device driver, this patch passes the IOTLB batching flags via IOTLB
API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint
that a bathced IOTLB updating may be initiated from the
userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished
the updating:

VHOST_IOTLB_BATCH_BEGIN
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE
...
VHOST_IOTLB_BATCH_END

Vhost-vDPA can then know that all mappings has been set and can do
optimization like passing all the mappings to the vDPA device driver.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:29 -04:00
Jason Wang b37556edec vhost: switch to use IOTLB v2 format
This patch tries to switch to use new kernel IOTLB format V2. Previous
version may have inconsistent ABI between 32bit and 64bit machines
because of the hole after type field. Refer kernel commit
("429711aec282 vhost: switch to use new message format") for more
information.

To enable this feature, qemu need to use a new ioctl
VHOST_SET_BACKEND_FEATURE with VHOST_BACKEND_F_IOTLB_MSG_V2 bit. A new
vhost setting backend features ops was introduced. And when we try to
set features for vhost dev, we will examine the support of new IOTLB
format and enable it. This process is total transparent to guest,
which means we can have different IOTLB message type in src and dst
during migration.

The conversion of IOTLB message is straightforward, just check the
type and behave accordingly.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:29 -04:00
Peter Maydell 1553d543ff usb: xhci sysbus support.
usb: use lock guards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCgAGBQJfceImAAoJEEy22O7T6HE4aW8QAL5YWzVvPiuTaCXv2v9Ol+W4
 P+hQff+YRmQr6uf8Jh2UQc88NRNGs4opPQ4Sl/aFNHb3f79sL1mEb/7LafshFZnf
 PODH7DhOWYHWNXX+/t5K0DXbX/nEvsMjNTeMRoZk0xOeIw3THiU4pohZuMZojvK8
 ih/OUyCs88+pc8Zzp2MeqGe9rDbb7YGeVHR6DZQdZw7nEBcs/f8SITEaNhoczcl0
 CSpY2bEdNegM9IDyhJsnFVuE+hLBhgPxCjSs9byhfOb5I15kpw2GqZS9I6iL7E6T
 QpUfnH3UVUgiR+820/3h1jO9mJgsF0ORrOMtVqTPSShBgqcvhfCcIjL0RDSTXpFe
 HyATsM+wo9Vlo8Rsmf7sIskojG4eC88PuMsMo7Fi4YSCSzlulLRY9O01SswC/GOG
 KrGPoNuO83QYkpO9k+25t5obSr5jnP2HGCXjnu3qnuiMNajUf3oSB/eVo8QJg0pO
 QFMuYcOyzYXFhAy4iQyKVRnq1vY44bSdkwR3tVPCPQhz2DBk7rvJAJaM+RtVRpiE
 rQdeD8xL01FfjaFoBjAWbJPH7Ql0QqpUC0/zvoRS14L9Jc/OW8ywezlT7qQSumo1
 6HsDOwaKp/isx4rnDP7vr/T1/ZXVZpogDgl9aF61J0FXhasWiOTvV/jkrNWhKj0T
 71r67RObAhdCPZaKi95b
 =L9cN
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200928-pull-request' into staging

usb: xhci sysbus support.
usb: use lock guards.

# gpg: Signature made Mon 28 Sep 2020 14:16:22 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20200928-pull-request:
  hw/usb: Use lock guard macros
  usb: hcd-xhci-sysbus: Attach xhci to sysbus device
  usb/hcd-xhci: Split pci wrapper for xhci base model
  usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c
  usb/hcd-xhci: Make dma read/writes hooks pci free

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-28 19:31:50 +01:00
Peter Maydell 74504514b1 Two small patches. One with a fix for the register API instance_size
and one for removing unused address variables from load_elf.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9wl2IACgkQIeENKd+X
 cFSN7gf8CtertCR9QCXELwY/4qOZq5/yLBX1cQkNYMGrkZ9n3hpGUifHBnmKvNkH
 VvhhuJAX0BnSftSaSSlWezFdwn/hwTRiVYaLnTC/sLrv3hBgoAqykKIDS1ncAgGx
 U7VwZH0oQVhQjBzMeYYMOhIwyOFeY1+5Odhs1uuyzHZ7qBGbtm+1EDrG4hXHJNBj
 oQnqtr093SzpR20uPQo1Dm1+6aF9Iw/9Kb8jBAChduTF0uEVvbl/WEtUB/7r+Dme
 ishAtZi4OxVJCZhDLlIAUM/4lsLv32OPcD5JjKlZpPBnziZg1jubI1nhVGnWY1g+
 m+b9MjNrZ7u1jgegLng3c+SvAxAd2Q==
 =Ma9R
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/alistair/tags/pull-register-20200927' into staging

Two small patches. One with a fix for the register API instance_size
and one for removing unused address variables from load_elf.

# gpg: Signature made Sun 27 Sep 2020 14:45:06 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-register-20200927:
  core/register: Specify instance_size in the TypeInfo
  load_elf: Remove unused address variables from callers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-28 16:49:10 +01:00
Peter Maydell 92d0950267 Trivial Patches Pull request 20200928
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl9xqZQSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748nFQQAJL/5ydfeo+t9RVTfatMI6bRP+loqQzc
 Y/t/xYgOfCQsMjXRU5HHNre+FtltqP0lVU2Ey2zAon7MjJDXfQOCv6aOK+vsOGXi
 FITC6vZ050VrVy7iPfXaJR5aIbkJme4NXLgJj9mqaFZELgoTAMCuCkGN+km3n/Uw
 pf0lI43VSkLt3pvHvGjy2UT51OjH6/LxaXcgY2w67nIH+KcLgxdh7fXlD+5Gxdug
 458gbMbtqAPb6qNV7jBbrgUMRx5hpUKoa5QvL0DWkIsboemPJGsTlw0nhON5ZPQ7
 XYNPyb9ELPYE5V8I9Ki+ESzsWFMVMdu0Hj/MNbnSDdg+2uR0xgCSIRnnuEwpSmLB
 jbhKa8b3B3nPFFNQAqQ6FPpOW76PpwFVKRAPT3p3rnDqrtXLUJpGdGzTz8ltMZry
 pOxdbSkuEl+79D1i5Lt5mfCqRNqOjYk1awPO4K/JdmhJxk9dFmY5X21edaIe6lN+
 GiZlE43fF+GM3HelplnTCIwlRAjhUX/PRSDBkeLuPYj0qFob27MFauMcsGvC28FI
 CQIY3CmIFCmzf8c1DUE3TVYWpJj0e+OnKU02D89/FF4M4TOGTa1/CtpNcpSDgE5A
 TCEw4cyEG1LEvDtw4DRdLBKVDnFW8XiUPz2xVC87/dZSC88CTllLnxtsaSfDHuui
 0Y0BBZ3MJxgs
 =t5Q1
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Trivial Patches Pull request 20200928

# gpg: Signature made Mon 28 Sep 2020 10:15:00 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  docs/system/deprecated: Move lm32 and unicore32 to the right section
  migration/multifd: Remove superfluous semicolons
  timer: Fix timer_mod_anticipate() documentation
  vhost-vdpa: remove useless variable
  Add *.pyc back to the .gitignore file
  virtio: vdpa: omit check return of g_malloc
  meson: fix static flag summary
  vhost-vdpa: fix indentation in vdpa_ops

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-28 14:03:09 +01:00
Amey Narkhede 5c43b603a2 hw/usb: Use lock guard macros
Use qemu LOCK_GUARD macros from "qemu/lockable.h" in
hw/usb/ccid-card-emulated.c, saves manual unlock calls.

Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200923134327.576139-1-ameynarkhede03@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-28 13:13:58 +02:00
Sai Pavan Boddu f00ff136ee usb: hcd-xhci-sysbus: Attach xhci to sysbus device
Use XHCI as sysbus device, add memory region property to get the
address space instance for dma read/write.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-5-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-28 12:40:11 +02:00
Sai Pavan Boddu 8ddab8dd3d usb/hcd-xhci: Split pci wrapper for xhci base model
This patch sets the base to use xhci as sysbus model, for which pci
specific hooks are moved to hcd-xhci-pci.c. As a part of this requirment
msi/msix interrupts handling is moved under XHCIPCIState. Made required
changes for qemu-xhci-nec.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-28 12:40:11 +02:00
Sai Pavan Boddu 755fba11fb usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c
Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-28 12:40:11 +02:00
Sai Pavan Boddu a5317074e1 usb/hcd-xhci: Make dma read/writes hooks pci free
This patch starts making the hcd-xhci.c pci free, as part of this
restructuring dma read/writes are handled without passing pci object.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1600957256-6494-2-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-28 12:40:11 +02:00
Alistair Francis e8a612b7e3 core/register: Specify instance_size in the TypeInfo
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <4cf1beb7dafb9143c261d266557d3173bf160524.1598376594.git.alistair.francis@wdc.com>
2020-09-25 16:52:24 -07:00
BALATON Zoltan 617160c9e1 load_elf: Remove unused address variables from callers
Several callers of load_elf() pass pointers for lowaddr and highaddr
parameters which are then not used for anything. This may stem from a
misunderstanding that load_elf need a value here but in fact it can
take NULL to ignore these values. Remove such unused variables and
pass NULL instead from callers that don't need these.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-25 16:52:08 -07:00
Peter Maydell 8c1c07929f Pull request
This includes the atomic_ -> qatomic_ rename that touches many files and is
 prone to conflicts.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl9rcwsACgkQnKSrs4Gr
 c8hpqQf+OTxEVXMS/RfXRVjsM0RsgDYWyyW1OoA3/XEOt+OrJn4VrEbs7gbe3qxL
 rql73g1fysRSdoLBK1m4hJgZ2Ak5Bbwz26nnyA/quVZWKHqMXQaPTEQpJcGNvwiz
 WlZJvNLVkl3kTnM+eguad7TOoWfp9Uz/f/2Q8mbQ5Y9LZm3rEBZC2hG5KNJWRV1Y
 kdN6D1Y2l85LKd8219XChNCFJdj+ktGFQOIiWb8JG98shH2G+0rv9vhgYmat7qrh
 sSv2Ii+9ZGzxDCUYgpcSiu5CJVe3tqLBgzGnAKtohywGqzvdiZaHJJQipPn51W80
 YyaDuuMObLwzkSOcfxK7DPM8IuJQVg==
 =+5d4
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

This includes the atomic_ -> qatomic_ rename that touches many files and is
prone to conflicts.

# gpg: Signature made Wed 23 Sep 2020 17:08:43 BST
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  qemu/atomic.h: rename atomic_ to qatomic_
  tests: add test-fdmon-epoll
  fdmon-poll: reset npfd when upgrading to fdmon-epoll
  gitmodules: add qemu.org vbootrom submodule
  gitmodules: switch to qemu.org meson mirror
  gitmodules: switch to qemu.org qboot mirror
  docs/system: clarify deprecation schedule
  virtio-crypto: don't modify elem->in/out_sg
  virtio-blk: undo destructive iov_discard_*() operations
  util/iov: add iov_discard_undo()
  virtio: add vhost-user-fs-ccw device
  libvhost-user: handle endianness as mandated by the spec
  MAINTAINERS: add Stefan Hajnoczi as block/nvme.c maintainer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-24 18:48:45 +01:00
Peter Maydell f7f1d916b2 machine + QOM queue, 2020-09-22
QOM cleanups:
 * Convert instance properties to class properties
   (Eduardo Habkost)
 * simplify object_find_property / object_class_find_property
   (Daniel P. Berrangé)
 
 Deprecated feature removal:
 * Drop support for invalid topologies (Igor Mammedov)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl9qeb0UHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxab1yg//SZmjP5pGaTxWZzuSy7BwDgUWuBqK
 QoeJJOAmckzbqI4klHB824+oDSGDwE4pE/1QRRZihQOqSceahpD/CILc8CFDbdd4
 vf1YQgFP9iJV5GtkllHTahP2/LMAoG/ivU4+SO0VD9UO89bcAG3jNvScZaxbsUoF
 FzfHm9OtckiWmkm29+r7dvCqfyGRHHXcbEc/mTRRVOqIlnTxSADiCfHjtPmkcK8E
 vHjXzRIBSjqmGPUZY9FLyFyhYyVNjj2B5PdBLqNqqRgn7/vco9jyUW/qpChdkGAK
 F24IjLQTq19ndx24+vsyAyvjlJXtu/SBb/OQuAhHhv+RwgnqOJWUp5VTrAK2rphL
 cOJuaFBbcSmuDN2/0orWdtpnc7kIVddGVshvh1AIbIHLckE5P3PVfCan+PeUqJWj
 t8WcDXj5HX5wfc5qKpSnds5ekG4aU0f9Cp6WE3zROz7syNfQkw3BFDJyGu5fEfD8
 PrjDELQHAEngdzMVoY0bSnX4wtNJG/Pls3xjGJt5V9BM6bffoGY6APt3bZsptDmX
 VBmpp1hPv23uDP7ONHE+34D0HUQ79IvHJgU8M55R23Qc+s/7zR3FETfblaJerEbl
 15tRBL1kNpcCN69wqK57Jh7BEoCbrA2u3GQgGfSWwZcRaS02a6FLkJvFSoHNuFV9
 31Js0bePXitbouU=
 =FSgD
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

machine + QOM queue, 2020-09-22

QOM cleanups:
* Convert instance properties to class properties
  (Eduardo Habkost)
* simplify object_find_property / object_class_find_property
  (Daniel P. Berrangé)

Deprecated feature removal:
* Drop support for invalid topologies (Igor Mammedov)

# gpg: Signature made Tue 22 Sep 2020 23:25:01 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  sifive_u: Register "start-in-flash" as class property
  sifive_e: Register "revb" as class property
  i440fx: Register i440FX-pcihost properties as class properties
  machine: Register "memory-backend" as class property
  xlnx-zcu102: Register properties as class properties
  cpu/core: Register core-id and nr-threads as class properties
  s390x: Register all CPU properties as class properties
  cryptodev-backend: Register "chardev" as class property
  cryptodev-vhost-user: Register "chardev" as class property
  smp: drop support for deprecated (invalid topologies)
  qom: simplify object_find_property / object_class_find_property

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-24 15:28:26 +01:00
Laurent Vivier 9e32d4ead3 vhost-vdpa: remove useless variable
in vhost_vdpa_listener_region_del(), try_unmap is always true and so,
vhost_vdpa_dma_unmap() is always called. We can remove the variable

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200920152024.860172-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-23 19:11:33 +02:00
Li Qiang 986d4f7874 virtio: vdpa: omit check return of g_malloc
If g_malloc fails, the application will be terminated.
No need to check the return value of g_malloc.

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200819144309.67579-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-23 19:08:29 +02:00
Stefano Garzarella 4b870f1a05 vhost-vdpa: fix indentation in vdpa_ops
This patch fixes wrong indentation of some vdpa_ops fields introduced
with the initial commit 108a64818e ("vhost-vdpa: introduce vhost-vdpa
backend")

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200916152634.56917-1-sgarzare@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-23 19:05:52 +02:00
Stefan Hajnoczi d73415a315 qemu/atomic.h: rename atomic_ to qatomic_
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

  $ CC=clang CXX=clang++ ./configure ... && make
  ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

  $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
    sort -u >/tmp/changed_identifiers
  $ for identifier in $(</tmp/changed_identifiers); do
        sed -i "s%\<$identifier\>%q$identifier%g" \
            $(git grep -I -l "\<$identifier\>")
    done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23 16:07:44 +01:00
Stefan Hajnoczi 8080747748 virtio-crypto: don't modify elem->in/out_sg
A number of iov_discard_front/back() operations are made by
virtio-crypto. The elem->in/out_sg iovec arrays are modified by these
operations, resulting virtqueue_unmap_sg() calls on different addresses
than were originally mapped.

This is problematic because dirty memory may not be logged correctly,
MemoryRegion refcounts may be leaked, and the non-RAM bounce buffer can
be leaked.

Take a copy of the elem->in/out_sg arrays so that the originals are
preserved. The iov_discard_undo() API could be used instead (with better
performance) but requires careful auditing of the code, so do the simple
thing instead.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200917094455.822379-4-stefanha@redhat.com>
2020-09-23 13:41:58 +01:00
Stefan Hajnoczi 7bd04a041a virtio-blk: undo destructive iov_discard_*() operations
Fuzzing discovered that virtqueue_unmap_sg() is being called on modified
req->in/out_sg iovecs. This means dma_memory_map() and
dma_memory_unmap() calls do not have matching memory addresses.

Fuzzing discovered that non-RAM addresses trigger a bug:

  void address_space_unmap(AddressSpace *as, void *buffer, hwaddr len,
                           bool is_write, hwaddr access_len)
  {
      if (buffer != bounce.buffer) {
          ^^^^^^^^^^^^^^^^^^^^^^^

A modified iov->iov_base is no longer recognized as a bounce buffer and
the wrong branch is taken.

There are more potential bugs: dirty memory is not tracked correctly and
MemoryRegion refcounts can be leaked.

Use the new iov_discard_undo() API to restore elem->in/out_sg before
virtqueue_push() is called.

Fixes: 827805a249 ("virtio-blk: Convert VirtIOBlockReq.out to structrue")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1890360
Message-Id: <20200917094455.822379-3-stefanha@redhat.com>
2020-09-23 13:41:58 +01:00
Halil Pasic bd0bbb9aba virtio: add vhost-user-fs-ccw device
Wire up the CCW device for vhost-user-fs.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Message-id: 20200901150019.29229-2-mhartmay@linux.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-23 13:41:58 +01:00
Eduardo Habkost 418b473e8f sifive_u: Register "start-in-flash" as class property
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200921221045.699690-25-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:48:29 -04:00
Eduardo Habkost fabbcbd953 sifive_e: Register "revb" as class property
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200921221045.699690-24-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:48:29 -04:00
Eduardo Habkost 53f6474626 i440fx: Register i440FX-pcihost properties as class properties
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200921221045.699690-23-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:48:29 -04:00
Eduardo Habkost acd5b054e4 machine: Register "memory-backend" as class property
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200921221045.699690-21-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:48:29 -04:00
Eduardo Habkost f93a83c004 xlnx-zcu102: Register properties as class properties
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200921221045.699690-20-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:48:29 -04:00
Eduardo Habkost 2decc51f19 cpu/core: Register core-id and nr-threads as class properties
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200921221045.699690-18-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:48:29 -04:00
Igor Mammedov c4332cd1dc smp: drop support for deprecated (invalid topologies)
it's was deprecated since 3.1

Support for invalid topologies is removed, the user must ensure
that topologies described with -smp include all possible cpus,
i.e. (sockets * cores * threads) == maxcpus or QEMU will
exit with error.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911133202.938754-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:45:16 -04:00
Daniel P. Berrangé efba15959c qom: simplify object_find_property / object_class_find_property
When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.

Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.

As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.

Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:45:16 -04:00
Peter Maydell edf6ea6fbe usb: fix u2f build
usb: fix ohci oob access and loop issues
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCgAGBQJfaGseAAoJEEy22O7T6HE4ZcUP/idasy/vHdsB2qqV7S3Qz579
 VzHD1D9PLc3gJ3dKW9u8JEyIMRH+elkpriv/YaYsZS0mZtaIlZiyhJ0aNzEDkZ4r
 UDW4VlD9f3Se5YMf4PAWIFgMqUOsqplTRIwwqWjJ5R4hQARu6YoERBx5yOZ3Z9sr
 FBHjZkPTvs5VEc/lvQ5SiK1FDotks83+6llYx45xaNI4CaYDjZWdMD9nsiKwRATp
 uJ1D/2Tg3pQXlobh0zUk0yU2SqQtGUhkBNSeX0Urc4uRPi+3eCZF8aWW0EjfMcas
 NH+NeFzlc6rWk2XFJUhqgcaa9681q7DaXSWk8upiL6gff5V8CDVe8/hoPJ2ttB01
 PaG8RDG9pD3GEgwj+YzwnsCSUpBKrF0Bqj5XIQ5GEtmhKbgiTuZ5iIDCP17yRx8x
 LufTW1FDXxgjHjMT6qkqsiCR6jKAvKsdHvyHcgvfWV0uMhllETCCM9KxCu1xtM3Y
 xwP4GH0vtrvq/J9mVYLcb2qPzMoWCwBQHcho24SlFi4ZTLSpdpRuMG2gRGUfy+3Y
 B+l90AUzW9OVw/2KPrxj8T1koIf7NJv6qUd1W1CEx1hZBWgpzDAKa7RtfukD9QNn
 eGt8dJcILvqTdU1xU//yzUExR7/AC98VIVbyq5J+e8vBd8pDT1uXu1uglBK+If0U
 7+YGxB6Y4QCdu1sEvC3K
 =c3+E
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200921-pull-request' into staging

usb: fix u2f build
usb: fix ohci oob access and loop issues

# gpg: Signature made Mon 21 Sep 2020 09:58:06 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20200921-pull-request:
  hw: usb: hcd-ohci: check for processed TD before retire
  hw: usb: hcd-ohci: check len and frame_number variables
  usb: fix u2f build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-22 16:40:56 +01:00
Peter Maydell 834b9273d5 Pull request trivial patches 20200919
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl9mUVcSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748c5IP/2Jh7HuM5LpGuhca81zCnUxIHnnfXLpR
 YXbRsD/q4VrCe9WxFZeyul1zcCpV4BnLNqsWA2PH44at+vcvCuXLU9vVzar1SMTh
 pAwuXc4qGkV4zttLzzYwkimQLxHl1Cy7RtoLJB7GjLj0A/VBvD7Z2cO2KSF4EOzU
 KQAHcIm8WYWjZy8lx5ZrCvq5KkPHMK+XvVxD+v/gXVWzU23wFMVJwhzi2PXqetRe
 RnAFA8tF3xlvXTJmeqqN277Otv6WLnANe1rjr/w4j5tUINaaiAX/gWkrwcFZprjo
 1p0E3o8ztrtql7B8DWH+xWLeFUpq3Qd9Ztp4ujFmpWQysbCZ6BWFocAz+v4Dd0F3
 luJP0e8X5hQAzJiu9aucOKpnUHaieWamo5J+5pWezTGB0wNYgnhRDp2LAefadV+I
 WmDjIWtZZ3Je48qT0bGzh+p8ZSqGQx/a5xx6eXr7MdlNhiWIV/evqotU2MoLnO7d
 QhQevHlk7nxayk3laVA4nTwJRdtEN8zfbuAB+gMZZvR11yBNrBm6q7oMNhkuP0QV
 glcta70RE7Nfa4TZaFzEzrjiF6V0k0+TtGY0VPB/0xjtCepiwOuoVbEjSe4arJ7Z
 1LkGY45Rdaas8yqWwZGAjbFWTkke85v+S8g2lCj/HihgfPf585uRZVPhJ9sIGc9w
 JcWyaIFsgHh8
 =MxMx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial patches 20200919

# gpg: Signature made Sat 19 Sep 2020 19:43:35 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  contrib/: fix some comment spelling errors
  qapi/: fix some comment spelling errors
  disas/: fix some comment spelling errors
  linux-user/: fix some comment spelling errors
  util/: fix some comment spelling errors
  scripts/: fix some comment spelling errors
  docs/: fix some comment spelling errors
  migration/: fix some comment spelling errors
  qemu/: fix some comment spelling errors
  scripts/git.orderfile: Display meson files along with buildsys ones
  hw/timer/hpet: Fix debug format strings
  hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw
  meson: remove empty else and duplicated gio deps
  manual: escape backslashes in "parsed-literal" blocks
  ui/spice-input: Remove superfluous forward declaration
  hw/ppc/ppc4xx_pci: Replace magic value by the PCI_NUM_PINS definition
  hw/gpio/max7310: Remove impossible check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-22 15:42:23 +01:00
Prasad J Pandit 1be90ebecc hw: usb: hcd-ohci: check for processed TD before retire
While servicing OHCI transfer descriptors(TD), ohci_service_iso_td
retires a TD if it has passed its time frame. It does not check if
the TD was already processed once and holds an error code in TD_CC.
It may happen if the TD list has a loop. Add check to avoid an
infinite loop condition.

Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20200915182259.68522-3-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-21 09:44:54 +02:00
Prasad J Pandit 1328fe0c32 hw: usb: hcd-ohci: check len and frame_number variables
While servicing the OHCI transfer descriptors(TD), OHCI host
controller derives variables 'start_addr', 'end_addr', 'len'
etc. from values supplied by the host controller driver.
Host controller driver may supply values such that using
above variables leads to out-of-bounds access issues.
Add checks to avoid them.

AddressSanitizer: stack-buffer-overflow on address 0x7ffd53af76a0
  READ of size 2 at 0x7ffd53af76a0 thread T0
  #0 ohci_service_iso_td ../hw/usb/hcd-ohci.c:734
  #1 ohci_service_ed_list ../hw/usb/hcd-ohci.c:1180
  #2 ohci_process_lists ../hw/usb/hcd-ohci.c:1214
  #3 ohci_frame_boundary ../hw/usb/hcd-ohci.c:1257
  #4 timerlist_run_timers ../util/qemu-timer.c:572
  #5 qemu_clock_run_timers ../util/qemu-timer.c:586
  #6 qemu_clock_run_all_timers ../util/qemu-timer.c:672
  #7 main_loop_wait ../util/main-loop.c:527
  #8 qemu_main_loop ../softmmu/vl.c:1676
  #9 main ../softmmu/main.c:50

Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <j_kangel@163.com>
Reported-by: Yi Ren <yunye.ry@alibaba-inc.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20200915182259.68522-2-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-21 09:44:54 +02:00
Gerd Hoffmann 26d56f489e usb: fix u2f build
Just use qemu_open_old() for a quick fix, switch
to better error handling left for another day.

Fixes: 448058aa99 ("util: rename qemu_open() to qemu_open_old()")
Cc: César Belley <cesar.belley@lse.epita.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20200918110122.9121-1-kraxel@redhat.com
2020-09-21 09:44:54 +02:00
Eduardo Habkost 8063396bf3 Use OBJECT_DECLARE_SIMPLE_TYPE when possible
This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
  --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Eduardo Habkost a489d1951c Use OBJECT_DECLARE_TYPE when possible
This converts existing DECLARE_OBJ_CHECKERS usage to
OBJECT_DECLARE_TYPE when possible.

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Eduardo Habkost 30b5707c26 qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros
One of the goals of having less boilerplate on QOM declarations
is to avoid human error.  Requiring an extra argument that is
never used is an opportunity for mistakes.

Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.

Coccinelle patch used to convert all users of the macros:

  @@
  declarer name OBJECT_DECLARE_TYPE;
  identifier InstanceType, ClassType, lowercase, UPPERCASE;
  @@
   OBJECT_DECLARE_TYPE(InstanceType, ClassType,
  -                    lowercase,
                       UPPERCASE);

  @@
  declarer name OBJECT_DECLARE_SIMPLE_TYPE;
  identifier InstanceType, lowercase, UPPERCASE;
  @@
   OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
  -                    lowercase,
                       UPPERCASE);

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Eduardo Habkost e38d3c5ce5 sifive: Use DECLARE_*CHECKER* macros
$ ./scripts/codeconverter/converter.py -i \
   --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 13:49:48 -04:00
Eduardo Habkost ac900edeed sifive: Move QOM typedefs and add missing includes
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

 $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
    $(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 13:49:48 -04:00
Eduardo Habkost 13b8c35418 sifive_u: Rename memmap enum constants
Some of the enum constant names conflict with the QOM type check
macros (SIFIVE_U_OTP, SIFIVE_U_PRCI).  This needs to be addressed
to allow us to transform the QOM type check macros into functions
generated by OBJECT_DECLARE_TYPE().

Rename all the constants to SIFIVE_U_DEV_*, to avoid conflicts.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200911173447.165713-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 13:49:48 -04:00
Eduardo Habkost 5488f2760a sifive_e: Rename memmap enum constants
Some of the enum constant names conflict with a QOM type check
macro (SIFIVE_E_PRCI).  This needs to be addressed to allow us to
transform the QOM type check macros into functions generated by
OBJECT_DECLARE_TYPE().

Rename all the constants to SIFIVE_E_DEV_*, to avoid conflicts.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200911173447.165713-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 13:49:48 -04:00
Laszlo Ersek 4318432ccd hw/nvram/fw_cfg: fix FWCfgDataGeneratorClass::get_data() consumption
The documentation on g_byte_array_free()
<https://developer.gnome.org/glib/stable/glib-Byte-Arrays.html#g-byte-array-free>
says:

> Returns
>
> the element data if free_segment is FALSE, otherwise NULL. The element
> data should be freed using g_free().

Because we currently call g_byte_array_free() with free_segment=TRUE, we
end up passing data=NULL to fw_cfg_add_file().

On the plus side, fw_cfg_data_read() and fw_cfg_dma_transfer() both deal
with NULL data gracefully: QEMU does not crash when the guest reads such
an item, the guest just gets a properly sized, but zero-filled blob.

However, the bug breaks UEFI HTTPS boot, as the IANA_TLS_CIPHER array,
generated otherwise correctly by the "tls-cipher-suites" object, is in
effect replaced with a zero blob.

Fix the issue by passing free_segment=FALSE to g_byte_array_free():

- the caller (fw_cfg_add_from_generator()) temporarily assumes ownership
  of the generated byte array,

- then ownership of the byte array is transfered to fw_cfg, as
  fw_cfg_add_file() links (not copies) "data" into fw_cfg.

Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 3203148917
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200916151510.22767-1-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-18 17:18:18 +02:00
Peter Maydell e883b492c2 Aspeed patches :
* Couple of cleanups
 * New machine properties to define the flash models
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAl9kYGcACgkQUaNDx8/7
 7KF8ZhAAz1sMrIMCfMovyO+MOIo2ejCDzbCamPulme8GctKf+E3yJ+BTtYkyuxJk
 8VxmvFe730KNYC/eUaxddqvFlNDkWbbsoN0YrzqOz1pJKvy7HLUzVt8cX68vcC7i
 K+uKdUh1uCf8SRVOdPXrfjbpRE48OZDQEmwfd+Dd+zm/J3LO/z+c3UK2ZvUSidZ7
 LefiZYdAAqKLkjr+bVRuuWl92+ZXU1hotciac291CArJ+UaKrHF2WgUYq/SmB0Cr
 Bmtl1E5Be2DqvfiIjcJw8/vhE4pGgZEjr8vhLQatxonH4LBKhQVX0KedmmgAheuH
 J49TgrKV+s5cMw6XDfJv5h29FgDxM07Te0y1Os8R8GpWJEVQ3JB6u3FFYpGxywBz
 u/zRtZRZMDVrnNzUdl/FsYauD167hhVUn9LfVy7DTTv+Vi49NwGy3+Tl/rakUxgq
 YjEw99kDaBAWimW/CX40R9qodshxQ4pzN+1C4i6qWdXCFL9xJVXxOwGVlDg7BqGq
 uw6FRGC9sv7qp22PIGBv5sHL1YWSgMZtJpHaruBPDKom0zeI6rvjIm7ZlXONnTXj
 Fo4xW/JJVqL0+e0gAsChgeTA89zWXGPx72IFs+I7nPMRkDdmtBqQwSd0zSh3VaCJ
 bhOixgDhaFhKzKIdOHzDrCj413NoYM/NhDzC4U0Rx0nZKuMsmZk=
 =jN+V
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200918' into staging

Aspeed patches :

* Couple of cleanups
* New machine properties to define the flash models

# gpg: Signature made Fri 18 Sep 2020 08:23:19 BST
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-aspeed-20200918:
  misc: aspeed_scu: Update AST2600 silicon id register
  hw/arm/aspeed: Add machine properties to define the flash models
  hw/arm/aspeed: Map the UART5 device unconditionally

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-18 13:36:42 +01:00