If the starting partition offset is incompatible with the bigalloc
cluster size, complain and exit, instead of creating a file which
would have a logical to physical block mapping which breaks the
cluster alignment requirement.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The chattr(1) manpage now refers users to filesystem-specific
manpages for details on supported attributes, so add those to
ext4.5.
I've left out oddities like being able to set the compressed
or no-tail-packing flags, or setting data journaling on ext2.
That behavior seems like a bug, not a feature.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the user does not specify the file system size, and the file does
not exist, give an error message like this:
The file /tmp/foo.img does not exist and no size was specified.
instead of this:
Creating regular file /tmp/foo.img
mke2fs: Device size reported to be zero. Invalid partition specified, or
partition table wasn't reread after running fdisk, due to
a modified partition being busy and in use. You may need to reboot
to re-read your partition table.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we determine that we can't parse the array value as an integer,
we need to restore the square brackets to the field name, so that we
can find a match with block[IND], block[DIND], and block[TIND] in the
inode field table.
Reported-by: Jun He <jhe@cs.wisc.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The extent count calculation works correctly with the FIBMAP ioctl in
verbose (-v) mode, but without the verbose option, the calculation was
broken because we weren't properly updating the fm_ext data structures
in non-verbose mode.
Addresses-Launchpad-Bug: #1356496
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The following tests were using md5sum: i_e2image, u_mke2fs, and
u_tune2fs. Convert them to use crcsum for better portability (not all
environments have md5sum; some might have sha1sum instead :-)
For our purposes crcsum is quite sufficient.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_flush2() unconditionally writes the block group descriptors to
disk even if the underlying FS isn't marked dirty. This causes the
following error message on a fsck -n run:
e2fsck 1.43-WIP (09-Jul-2014)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Error writing block 2 (Attempt to write block to filesystem resulted in short write). Ignore error? no
Error writing block 2 (Attempt to write block to filesystem resulted in short write). Ignore error? no
Error writing file system info: Attempt to write block to filesystem resulted in short write
Since ext2fs_close2() only calls flush if the dirty flag is set,
modify e2fsck to exhibit the same behavior so that we don't spit out
write errors for a read only check.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A user who sees the message
***** REBOOT LINUX *****
or
***** FILE SYSTEM WAS MODIFIED *****
might think that e2fsck was complete even though we haven't finished
writing out the superblock or bitmap blocks, and then either forcibly
reboot or power cycle the box, or yank the USB key out while the
storage device is still being written (before e2fsck exits).
So rearrange the exit path of e2fsck so that we flush out the dirty
superblock/bg descriptors/bitmaps before we print the final message.
Also clean up this code so that the flow of control is easier to
understand, and add error checking to catch any errors (normally
caused by I/O errors writing to the disk) for these final writebacks.
Addresses-Debian-Bugs: #757543, #757544
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Dan Jacobson <jidanni@jidanni.org>
This test checks to make sure resize2fs can properly handle a file
system which started life as a normal ext4 file system and then was
grown to a size where meta_bg was enabled, and then shrunk back below
the point where the meta_bg format is still needed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The test verifies that e2fsck can properly fix a file system where the
value of s_first_meta_bg in the superblock is larger than the number
of block group descriptors in the file system. E2fsck will fix this
by clearing the meta_bg feature.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When shrinking a file system, if the number block groups drops below
the point where we started using the meta_bg layout, disable the
meta_bg feature and set s_first_meta_bg to zero. This is necessary to
avoid creating an invalid/corrupted file system after the shrink.
Addresses-Debian-Bug: #756922
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Marcin Wolcendorf <antymat+debian@chelmska.waw.pl>
Tested-by: Marcin Wolcendorf <antymat+debian@chelmska.waw.pl>
If s_first_meta_bg is greater than the of number block group
descriptor blocks, then reading or writing the block group descriptors
will end up overruning the memory buffer allocated for the
descriptors. Fix this by limiting first_meta_bg to no more than
fs->desc_blocks. This doesn't correct the bad s_first_meta_bg value,
but it avoids causing the e2fsprogs userspace programs from
potentially crashing.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit baa3544609 ("libext2fs: have UNIX IO manager use
pread/pwrite) causes a breakage on 32-bit systems where off_t is
32-bits for file systems larger than 4GB. Fix this by using
pread64/pwrite64 if possible, and if pread64/pwrite64 is not present,
using pread/pwrite only if the size of off_t is at least as big as
ext2_loff_t.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No behaviour changes. This will simplify the next commit.
Signed-off-by: Aaron Crane <arc@aaroncrane.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, both of these usages called dump_file() with a true value as
the "preserve" argument, which caused it to in turn call fix_perms() to
make the permissions on the locally-dumped file match those found on the
ext2 filesystem. fix_perms() then attempted to close(2) the file descriptor
(if any) before returning (though it didn't attempt to report on any errors
found while doing so).
However, in both of these situations, the local file being dumped had been
opened by the caller of dump_file(), which also closes it (and reports on
any errors detected when closing). This meant that both "rdump" and "dump
-p" would then emit a spurious EBADF message when trying to re-close the
local file descriptor.
Deleting the spurious close(2) call in fix_perms() fixes the problem in both
commands.
Signed-off-by: Aaron Crane <arc@aaroncrane.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Place the allocation bitmaps and inode table blocks so they are
adjacent, even in the last flexbg.
Previously, after running "mke2fs -t ext4 DEV 286720", the layout of
the last few block groups would look like this:
Group 32: (Blocks 262145-270336) [INODE_UNINIT, ITABLE_ZEROED]
Block bitmap at 262145 (+0), Inode bitmap at 262161 (+16)
Inode table at 262177-262432 (+32)
Group 33: (Blocks 270337-278528) [INODE_UNINIT, BLOCK_UNINIT, ITABLE_ZEROED]
Block bitmap at 262146 (bg #32 + 1), Inode bitmap at 262162 (bg #32 + 17)
Inode table at 262433-262688 (bg #32 + 288)
Group 34: (Blocks 278529-286719) [INODE_UNINIT, ITABLE_ZEROED]
Block bitmap at 262147 (bg #32 + 2), Inode bitmap at 262163 (bg #32 + 18)
Inode table at 262689-262944 (bg #32 + 544)
Now, they look like this:
Group 32: (Blocks 262145-270336) [INODE_UNINIT, ITABLE_ZEROED]
Block bitmap at 262145 (+0), Inode bitmap at 262148 (+3)
Inode table at 262151-262406 (+6)
Group 33: (Blocks 270337-278528) [INODE_UNINIT, BLOCK_UNINIT, ITABLE_ZEROED]
Block bitmap at 262146 (bg #32 + 1), Inode bitmap at 262149 (bg #32 + 4)
Inode table at 262407-262662 (bg #32 + 262)
Group 34: (Blocks 278529-286719) [INODE_UNINIT, ITABLE_ZEROED]
Block bitmap at 262147 (bg #32 + 2), Inode bitmap at 262150 (bg #32 + 5)
Inode table at 262663-262918 (bg #32 + 518)
This reduces the free space fragmentation in a freshly created file
system. It also allows the following mke2fs command to succeed:
mke2fs -t ext4 -b 4096 -O ^resize_inode -G $((2**20)) DEV 2130483
(Note that while this allows people to run mke2fs with insanely large
flexbg sizes, this is not a recommended practice, as the kernel may
refuse to resize such a file system while mounted, since it currently
tries to allocate an in-memory data structure based on the size of the
flexbg, and so a file system with a very large flexbg size will cause
the memory allocation to fail. This will hopefully be fixed in a
future kernel release, but if the goal is to force all of the metadata
blocks to be at the beginning of the file system, it's better to use
the packed_meta_blocks configuration parameter in mke2fs.conf.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit d988201ef9.
The problem with this commit is that causes common small file system
configurations to fail. For example:
mke2fs -O flex_bg -b 4096 -I 1024 -F /tmp/tt 79106
mke2fs 1.42.11 (09-Jul-2014)
/tmp/tt: Invalid argument passed to ext2 library while setting
up superblock
This check in ext2fs_initialize() was added to prevent the metadata
from being allocated beyond the end of the filesystem, but it is
also causing a wide range of failures for small filesystems.
We'll address this in a different way, by using a smarter algorithm
for deciding the layout of metadata blocks for the last flex block
group.
Reported-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When do_freefrag() is called from debugfs, the value of optind is
not reset. Rectify that by calling reset_getopt().
Signed-off-by: Artemiy Volkov <artemiyv@acm.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we're appending an extent to the end of a file and the index
block is full, don't split the index block into two half-full index
blocks because this leaves us with under utilized index blocks, at
least in the fallocate case. Instead, copy the last extent from the
full block into the new block. This isn't perfect utilization, but
there's a lot of work involved in teaching extent.c to be able to goto
a nonexistent node in a newly allocated (and empty) extent block.
This patch does not fix the general problem of keeping the extent tree
balanced.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If pread/pwrite are present, have the UNIX IO manager use them for
aligned IOs (instead of the current seek -> read/write), thereby
saving us a (minor) amount of system call overhead.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Print filefrag_fiemap() error message to stderr instead of stdout.
Only call ioctl(EXT3_IOC_GETFLAGS) for ext{2,3,4} filesystems to
decide if the ext2 indirect block allocation heuristic shold be used.
Properly handle the the force_bmap (-B) option.
Exit with a positive error number instead of a negative one.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The f_badcluster output format depends on how libreadline formats
and outputs the commands read from stdin. Instead of trying to
handle these differences, use an input command file, which does
not depend on external components to be consistent.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Quiet warnings about signed vs. unsigned character mismatch.
Use __u8 for storing UUIDs instead of char to match the superblock
s_uuid field.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This bug was introduced by commit 7dfefaf413 ("tune2fs: update
journal super block when changing UUID for fs").
Fixes-Coverity-Bug: 1229243
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using -U option you can change the UUID for fs, however it will not work
for journal device, since it have a copy of this UUID inside jsb (i.e.
journal super block). So copy UUID on change into that block.
Here is the initial thread:
http://comments.gmane.org/gmane.comp.file-systems.ext4/44532
You can reproduce this by executing following commands:
$ fallocate -l100M /tmp/dev
$ fallocate -l100M /tmp/journal
$ sudo /sbin/losetup /dev/loop1 /tmp/dev
$ sudo /sbin/losetup /dev/loop0 /tmp/journal
$ mke2fs -O journal_dev /tmp/journal
$ tune2fs -U da1f2ed0-60f6-aaaa-92fd-738701418523 /tmp/journal
$ sudo mke2fs -t ext4 -J device=/dev/loop0 /dev/loop1
$ dumpe2fs -h /tmp/dev | fgrep UUID
dumpe2fs 1.43-WIP (18-May-2014)
Filesystem UUID: 8a776be9-12eb-411f-8e88-b873575ecfb6
Journal UUID: e3d02151-e776-4865-af25-aecb7291e8e5
$ sudo e2fsck /dev/vdc
e2fsck 1.43-WIP (18-May-2014)
External journal does not support this filesystem
/dev/loop1: ********** WARNING: Filesystem still has errors **********
Reported-by: Chin Tzung Cheng <chintzung@gmail.com>
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Theodore Ts'o