Also fix a bug caused by a stray continuation backslash which caused
the e2fsck/Makefile to fail when profiling is enabled.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Since clang uses C99 semantics by default, the main changes required
to allow clang to build e2fsprogs was to add support the C99 inline
semantics, while still allowing us to be built when the legacy (but
still default for gcc) GNU C89 inline semantics are in force.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When passed a negative count (indicating a byte count rather than
a block count) e2fsck_handle_read_error() treats the data as a full
block, causing unix_write_blk64() (which can handle negative counts
just fine) to try to write too much. Given a faulty block device,
this resulted in a SEGV when unix_write_blk64() read past the bottom
of the stack copying the data to cache. (check_backup_super_block ->
unix_read_blk64 -> raw_read_blk -> e2fsck_handle_read_error)
Reported-by: Alex Friedman <alexfr@il.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Dan Streetman <ddstreet@us.ibm.com>
Reviewed-by: Mingming Cao <mcao@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In addition to the free blocks and free inodes, also print the number
of blocks and inodes in the verbose statistics.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Disks have gotten bigger, so 8 digits might not be enough. Allow for
12 digits worth of blocks, which is more than enough for 3 petabytes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add report_time, report_verbose, and report_features options to
e2fsck.conf which enable additional, more verbose reporting by e2fsck.
This is useful for large cloud installations where there are a large
number file systems being managed, and where it may not be obvious
from the e2fsck log files exactly how a particular file system is
configured.
The report_time and report_verbose options, which are the same as the
-tt and -v command line options, respectively, are useful because they
are options specific to e2fsck, and the fsck program does not have a
way of passing certain options only to a specific /sbin/fsck.<fstype>
program.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When checking to see whether or not a new name is unique, the code was
using the wrong length parameter, which could cause the anti-collision
loop for a long time trying to find what it thinks is a unique name.
Addresses-Sourceforge-Bug: #3540545
Reported-by: Vitaly Oratovsky <vmo@users.sourceforge.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously e2fsck would only allow a mounted file system to be checked
if it was the root file system and it was mounted read-only. Now
allow any file system mounted read-only if the -f option is specified.
This makes it easier to test how e2fsck handles checking file systems
which are mounted without having to test on the root file system.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This reverts commit 47c1b8e166.
The original reason for this commit was to speed up boots for hard
drives. However, I've measured the time difference on a 1TB laptop
drive, and it's not significant: 70ms vs 10ms when running e2fsck on a
clean file system.
The problem with this optimization is that we don't notice if the
journal superblock has a non-zero s_errno field. If we don't transfer
the error indicator from the journal superblock to the file system
superblock, then the kernel will transfer it when the file system is
remounted read-write, causing scary messages to appear in the syslog.
(And since there was a bug in the kernel code which didn't clear the
error indicator in the journal superblock, it would never get
cleared.)
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If user chooses to not fix quota info, then the FS should be
marked as having errors. PR_NO_OK prevented this from happening.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since "bool" is a valid C type, declarations of the form "int bool"
will cause compiler errors if <stdbool.h> is included. Rename these
variables to avoid this name clash.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The Build Log Hardening Check is a debian tool which scans the output
of a package build making sure that the security hardening flags are
used when compiling and linking all of binaries in a package.
For the most part we were passing CFLAGS, CPPFLAGS, and LDFLAGS down
to the compiler and link commands, but there there were one or two
exceptions. In addition, there where a few places in "make install"
where the V=1 option was not being honored, which triggered blhc
warnings since it couldn't analyze those commands.
The e2fsck.static was the only binary that was not getting built and
packaged with the hardening flags, but I've fixed all of the blhc
warnings so in the future it will be obvious if we regress.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
By the time we start processing the orphan inode list, we have already
calculated the total expected number of free blocks and inodes in
ctx->free_{blocks,inodes}. This is used to set the free blocks/inodes
count in the superblock in the case where we don't need to do a full
e2fsck.
We need to update these expected free block counts as we process the
orphan inode list so that superblock values are set correctly.
Otherwise we could have the following happen:
% e2fsck /tmp/test.img
e2fsck 1.42.3 (14-May-2012)
Truncating orphaned inode 12 (uid=0, gid=0, mode=0100644, size=0)
Setting free blocks count to 46 (was 79)
/tmp/test.img: clean, 12/16 files, 54/100 blocks
% e2fsck /tmp/test.img
e2fsck 1.42.3 (14-May-2012)
Setting free blocks count to 79 (was 46)
/tmp/test.img: clean, 12/16 files, 21/100 blocks
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The on-disk format for interior nodes in the extent tree does not
encode the length of each entry in the interior node; instead, it is
synthesized/simulated by the extent library code in libext2fs.
Unfortunately, this simulation is not perfect; in particular it does
not work for the last extent in the extent tree if there are
uninitialized blocks allocated using fallocate with
FALLOC_FL_KEEP_SIZE, and it leads to e2fsck incorrectly complaining
about an invalid zero-length extent.
We only need to worry about the extent length for the leaves of the
tree, since it is there were we are checking an on-disk value, as
opposed to a software-generated simulation. So restrict the check of
extent length to leaf nodes in the extent tree.
Reported-by: Tao Ma <tm@tao.ma>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the file system is mounted read-only after a file system error has
been detected, the fact that an error occurred is written to the
journal. This is important because while the journal is getting
replayed, the error indication in the superblock may very well get
overwritten.
Unfortunately, the code to propagate the error indication from the
journal to superblock was broken because this was being done before
the old file system handle is thrown away and the file system is
re-opened to ensure that no stale data is in the file system handle.
As a result, the error indication in the superblock was never written
out.
To fix this, we need to move the check if the journal's error
indicator has been set after the file system has been freed and
re-open.
Reported-by: Ken Sumrall <ksumrall@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Quite some definitions in quota library are not necessary. Remove them.
Also fold quota.h file into quotaio.h since it didn't contain that many
definitions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a file system was remounted read-only after a file system
corruption is detected, and then that file system is mounted and
unmounted by the kernel, the journal would have been recovered, but
the kernel currently leaves the s_errno field still set. This is
arguably a bug, since it has already propgated the non-zero s_errno
field to the file system superblock, where it will be retained until
e2fsck has been run.
However, e2fsck should handle this case for existing kernel by
checking the journal superblock's s_errno field even if journal
recovery is not required.
Without this commit, e2fsck would not notice anything wrong with the
file system, but a subsequent mount of the file system by the kernel
would mark the file system's superblock as needing checking (since the
journal's s_errno field would still be set), resulting an full e2fsck
run at the next reboot, which would find nothing wrong --- and then
when the file system was mounted, the whole cycle would repeat again.
I had seen reports of this in the past, but it wasn't until recently
that I realized exactly how this had come about, since normally e2fsck
would be run automatically before the file system is mounted again,
thus avoiding this problem. However, a user using a rescue CD who
didn't run e2fsck before mounting the a file system in this condition
could trigger this situation, and unfortunately, with previous
versions of e2fsprogs and the kernel, there would be no way out no
matter what the user tried to do.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 732e26b98e added checks to
prevent e2fsck from being run in filesystem-modifying mode against
a mounted or otherwise busy device, due to several bug reports of
users doing this even with the verbose warnings in check_mount().
However, it also prevented e2fsck from checking a mounted root
filesystem, which will prevent the node from booting. Once again
allow e2fsck to run against the mounted root filesystem if it is
also mounted read-only at the time.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The creation of inline wrappers ext2fs_open_file() and ext2fs_stat()
in commit c859cb1de0 in ext2fs.h caused
difficulties with the use of headers, since the headers for open64()
and stat64() may already be included (and skip the declaration of the
64-bit variants) before ext2fs.h is ever read. There is no real way
to solve the missing prototypes and resulting compiler warnings inside
ext2fs.h.
Since ext2fs_open_file() and ext2fs_stat() are not performance
critical operations, they do not need to be inline functions at all,
and the needed function headers can be handled properly in one file.
Similarly, posix_memalloc() was having difficulties with headers, and
was being defined in ext2fs.h, but it is now only being used by a
single file, so move the required header there.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, if e2fsck is run without the "-n" flag (i.e. it
might modify the filesystem), there is no guarantee that it will
open the filesystem with the EXCLUSIVE flag (i.e. O_EXCL) to
prevent the block device from being checked (in most cases this
means mounted, but it could also be an MD/LVM member device).
Conversely, if e2fsck is run with "-n" (i.e. read-only), and
/etc/mtab or /proc/mounts does not report the block device as
mounted then e2fsck thinks the filesystem is unmounted. In this
case, e2fsck incorrectly sets the EXCLUSIVE flag, which causes
the check to fail, even though e2fsck is running read-only.
To fix this, do not open with EXCLUSIVE if it is a read-only check,
and always open with EXCLUSIVE if the filesystem might be changed.
This also prevents filesystem mounts while e2fsck is running.
Also refuse allow e2fsck to run at all if the filesystem is BUSY.
The e2fsck check_mount() was checking for MOUNTED, but not BUSY,
and it should refuse to run outright if the block device is BUSY.
The previous MOUNTED heuristics pre-date the O_EXCL reservation
by the kernel, so there could be uncertainty due to stale /etc/mtab
data, but with newer kernels a busy device should never be modified.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The operator precedence bug means that we might pay atteion to
s_grp_quota_inum even if the RO_COMPAT_QUOTA feature flag is clear.
However, fortunately, this is unlikely to happen in practice.
Cc: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
64-bit journal support was broken; we weren't using the high bits from
the journal descriptor blocks! We were also using "unsigned long" for
the journal block numbers, which would be a problem on 32-bit systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't consider only an error in the superblock summary as incorrect.
The kernel does not update this field except at unmount time, so
don't print errors during a "-n" run if there is nothing else wrong.
Any other unfixed errors will themselves mark the filesystem invalid.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently fsck recomputes quotas and overwrites quota files
whenever its run. This causes unnecessary modification of
filesystem even when quotas were never inconsistent. We also
lose the limits information because of this. With this patch,
e2fsck compares the computed quotas to the on-disk quotas
(while updating the in-memory limits) and writes out the
quota inode only if it is inconsistent.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently e2fsck always incorrectly detects that quota inodes
need to be hidden (even if they are already hidden) and
modifies the superblock unnecessarily. This patch fixes the
check for hidden quota files and avoids modifying the
filesystem if quota inodes are already hidden.
Also, zero-out the old quota inode so that next fsck scan
doesn't complain.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have renamed buggy_init_scripts to accept_time_fudge. Explain this
so that people who find buggy_init_scripts in older e2fsck.conf files
understand what is going on.
Addresses-Debian-Bug: #646963
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change autoconf to test for setmntent() and use that to decide whether
to use getmntent() and setmntent(), since some systems don't have
setmntent() but they do have the mntent.h header file.
Also, remove the includes of mntent.h from e2fsck and mke2fs and other
places where it is not needed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We've decided to remove EOFBLOCKS_FL from the ext4 file system entirely,
because it is not actually very useful and it is causing more problems
than it solves. We're going to remove it from e2fsprogs first and then
after the new e2fsprogs version is common enough we can remove the
kernel part as well.
This commit changes e2fsck to not check for EOFBLOCKS_FL. Instead we
simply search for initialized extents past the i_size as this should not
happen. Uninitialized extents can be past the i_size as we can do
fallocate with KEEP_SIZE flag.
Also remove the EXT4_EOFBLOCKS_FL from lib/ext2fs/ext2_fs.h since it is
no longer needed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Print the actual errors returned by ext2fs_open2() and
ext2fs_check_desc() before we fall back to the backup block group
descriptors so that it's easier to see if there is some obscure
failure that is causing e2fsck to think that it should use the backup
block group descriptors.
Addresses-Google-Bug: #6208183
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For file systems that do not use MMP, there's no reason to close the
file system and then re-open the file system a second time, since
EXT2_FLAG_SKIP_MMP has no meaning for non-MMP file systems anyway.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@whamcloud.com>
We were checking for ENOMEM, but in fact if the malloc() fails,
ext2fs_check_desc() will return EXT2_ET_NO_MEMORY.
Addresses-Google-Bug: #6208183
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the ability to log messages about a file system to a specified
directory, using a file name templace that can be specified in
/etc/e2fsck.conf. This allows us to suppress the output of overly
verbose e2fsck outputs while still allowing the full logging output to
go to an appropriate file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also add appropriate documentation for options/max_count_problems and
problems/0xXXXXXX/max_count settings in /etc/e2fsck.conf
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This throttles the output of a particular problem type, to avoid a
bottleneck caused by (for example) printing a large number of
characters over a rate-limited a serial console.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If an extent has e_len set to zero, the kernel will oops with a
BUG_ON. Unfortunately, e2fsck wasn't catching this case. The kernel
needs to be fixed to notice this case and call ext4_error() instead of
failing an assertion check, but e2fsck should catch this case and
repair it (by deleting the errant extent).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We do not want to discard inode table if the underlying device does not
return zeros when reading non-provisioned blocks. The reason is that if
the inode table is not zeroed yet, then discard would not help us since
we would have to zero it anyway. In the case that inode table was
already zeroed, then the discard would cause subsequent reads to contain
non-deterministic data so we would not be able to assume that the inode
table was zeroed and we would need to zero it again, which does not
really make sense.
This commit adds check to prevent inode table from being discarded if
the discard does not zero data.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When argument '-n' was specified and should run in read-only mode, we
should not attempt to discard anything. In order to do that we have to
check for E2F_OPT_NO flag and clear E2F_OPT_DISCARD flag if E2F_OPT_NO
is set.
This commit fixes the problem when we would mark inode tables as zeroed
(EXT2_BG_INODE_ZEROED) even when e2fsck is running in read-only mode. We
also move the check for E2F_OPT_NO so we can clear E2F_OPT_DISCARD as
early as possible.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The boolean expression (!skip_group || csum_flag) is always true,
since if csum_flag is FALSE, skip_group must also be FALSE. Hence, we
can just remove the expression from the conditional altogether, thus
simplifying the code and making it easier to read/understand.
Also, in the case where the bit is set in the bitmap, there's no point
repeatedly setting first_free to be ext2fs_block_count(fs->super).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously when running e2fsck with '-E discard' argument the end of
the last group has not been discarded. This patch fixes it so we
always discard the end of the last group if needed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When calling e2fsck with '-E discard' option it might happen that
valid inodes are discarded accidentally. This is because we just
discard the part of inode table which lies past the free inode count.
This is terribly wrong (sorry!).
This patch fixes it so only the free parts of an inode table
is discarded, leaving used inodes intact. This was tested with highly
fragmented inode tables with block size 4k and 1k.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Phillip Susi <psusi@ubuntu.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Removing this check will allow us to eventually eliminate code from
the kernel which forcibly initialized the block bitmap when the inode
bitmap is first used. This would eliminate a required journal credit
and extra disk write.
Addresses-Google-Bug: #5944440
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that we have multiple backend implementations of the bitmap code,
this commit teaches e2fsck to use either the most appropriate backend
for each use case.
Since we don't know for sure if we will get it all right, the default
choices can be overridden via e2fsck.conf. The various definitions
are shown here, with the current defaults (which may change as we add
more bitmap implementations and as learn what works better).
; EXT2FS_BAMP64_BITARRAY is 1
; EXT2FS_BMAP64_RBTREE is 2
; EXT2FS_BMAP64_AUTODIR is 3
[bitmaps]
inode_used_map = 2 ; pass1
inode_dir_map = 3 ; pass1
inode_reg_map = 2 ; pass1
block_found_map = 2 ; pass1
inode_bad_map = 2 ; pass1
inode_imagic_map = 2 ; pass1
block_dup_map = 2 ; pass1
block_ea_map = 2 ; pass1
inode_link_info = 2 ; pass1
inode_dup_map = 2 ; pass1b
inode_done_map = 3 ; pass3
inode_loop_detect = 3 ; pass3
fs_bitmaps = 2
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The pass5 checks would fail if the expected and current {inode,block}
bitmaps used different back ends that returned different non-zero
values from the test_*_bitmap() functions. Fix this by changing
"(actual == bitmap)" to "(!actual == !bitmap)".
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Optimize how the tdb library so that running with [scratch_files] in
/etc/e2fsck.conf is more efficient. Use a better hash function,
supplied by Rogier Wolff, and supply an estimate of the size of the
hash table to tdb_open instead of using the default (which is way too
small in most cases). Also, disable the tdb locking and fsync calls,
since it's not necessary for our use in this case (which is
essentially as cheap swap space; the tdb files do not contain
persistent data.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to do an accounting of duplicate clusters on a per-cluster
instead of a per-block basis so we know when we've correctly accounted
for all of the multiply claimed blocks in a particular inode.
Thanks to Robin Dong for reporting this bug.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
PATH_MAX is not portable (for example, it doesn't exist on the Hurd).
So replace it with a new define, which defines the maximum length of
the base quota name. As it turns out, this is substantially smaller
than PATH_MAX.
Also move the definitions relating to quotaio.c from mkquota.h to
quotaio.h, as a cleanup.
Addresses-Debian-Bug: #649689
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When I create a non-extent file with the maximum size in ext4,
e2fsck detects the following error:
Pass 1: Checking inodes, blocks, and sizes
Inode 12, i_size is 4402345721856, should be 4402345721856. Fix?
As we know, e2fsck checks the size field of the inode in pass 1.
However, in case of the ext4 with the feature of ^extent and huge_file,
the maximum file size calculated in e2fsck is less than the real one.
The patch fixes this problem.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we abort fsck (due to ENOMEM for example) we exit
with only the FSCK_ERROR flag. It seems useful
to do the same sorts of checks as we do on normal
exit, and return whether the filesystem was modified,
whether there are still uncorrected errors, etc, even
in the abort case.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch cleans up the quota code as suggested in previous reviews. This
includes
* remove BUG_ON()s and 'exit()' calls from library code
* remove calls to malloc/free and instead use ext2fs_get/free_mem functions.
* lib/quota/common.c file in not needed anymore and is removed.
* rename exported functions to start with quota_
(ex: init_quota_context --> quota_init_context)
* better error handling in quota library
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since the advent of 64bit filesystems, revoke blocks store 64-bit
block numbers instead of 32-bit block numbers. Therefore we need to
be able to handle that case.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also remove the _("<foo>") marker from a string that was all numbers
and hence didn't need punctuation.
Thanks to Philipp Thomas and Goeran Uddeborg for reporting these
buglets.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For those e2fsprogs programs which use libcom_err and are
internationalized, pass the gettext() function to libcom_err during
program initialization.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The get_qf_name() function used PATH_MAX, which is non-portable.
Worse, it blindly assumed that PATH_MAX was the size of the buffer
passed to it --- which in the one and only place where it was used in
libquota, was a buffer declared to a fixed size 256 bytes.
Fix this by simply getting rid of the function altogether.
Cc: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
One table got missed when adding #ifdef's so that e2fsck/sigcatcher.c
would compile on non-Linux systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck modifies certain superblock fields which the kernel doesn't
look at, mark the superblock as dirty without marking the file system
as changed. This will avoid e2fsck signalling the init scripts that a
reboot is necessary. This is safe, because the kernel doesn't
actually look at these superblock fields.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If MMP is enabled and e2fsck determines that it needs to restart
itself on account of various MMP conditions, it will close the current
fs and jump back to the start of fs checking. However, closing fs
also frees it, which means that we need to set ctx->fs to NULL to
prevent subsequent open code from accessing the old deleted pointer.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
All of the signals which the signal catcher tries to interpret aren't
necessarily defined on all systems. So add #ifdef's to protect
various signals to avoid compilation failures on non-x86 platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In some cases the bad block inode gets corrupted. If it looks insane,
offer to clear it before trying to interpret it does more harm than
good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Multi-mount protection is feature that allows mke2fs, e2fsck, and
others to detect if the filesystem is mounted on a remote node (on
SAN disks) and avoid corrupting the filesystem. For e2fsprogs this
means that it checks the MMP block to see if the filesystem is in use,
and marks the filesystem busy while e2fsck is running on the system.
This is useful on SAN disks that are shared between high-availability
servers, or accessible by multiple nodes that aren't in HA pairs. MMP
isn't intended to serve as a primary HA exclusion mechanism, but as a
failsafe to protect against user, software, or hardware errors.
There is no requirement that e2fsck updates the MMP block at regular
intervals, but e2fsck does this occasionally to provide useful
information to the sysadmin in case of a detected conflict.
For the kernel (since Linux 3.0) MMP adds a "heartbeat" mechanism to
periodically write to disk (every few seconds by default) to notify
other nodes that the filesystem is still in use and unsafe to modify.
Originally-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Several compiler errors are quieted:
- zero-length gnu_printf format string
- unused variable
- uninitalized variable (though it isn't actually used for anything)
- fixed a bug in ext2fs_stat() if stat64() does not exist
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These reflect either file descriptors which aren't tested
for failure, or closures of fd's which may have failed.
In setup_tdb(), test for failure of mkstemp and return
without trying to open the file (again).
In reserve_stdio_fds, rather than closing the "extra"
fd == 3 due to the way the loop is written, just
don't go that far by using while (fd <= 2).
In logsave, it forks and retries forever if open fails,
but at least make coverity happy by explicitly not
trying to close a negative file descriptor.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fn and/or array was not freed in some error paths.
[ Also make sure the array is NULL terminated before we free it in
get_dirlist(). --tytso]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
e2fsck_allocate_memory() already sets allocated memory to 0,
so remove the explicit memset.
Especially since it was setting the wrong size (iter not *iter)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
old_op is set but never used, because we restore "0"
not old_op. So don't bother with it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
testing fs for NULL in expand_percent_expression():
e2fsck_ctx = fs ? (e2fsck_t) fs->priv_data : NULL;
implies that fs could be NULL, but it's passed to print_pathname()
which defererences it without further testing.
So make this safe by returning "???" for a nul fs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The name_len field in ext2_dir_entry is actually comprised of
the name length in the lower 8 bytes, and the filetype in the
high 8 bytes. So in places, we mask name_len with 0xFF to
get the actual length.
But once we have masked name_len with 0xFF, there is no point
in testing whether it is greater than EXT2_NAME_LEN, which
is 255 - or 0xFF. So all of these tests are extraneous.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reserve EXT4_FEATURE_RO_COMPAT_METADATA_CSUM and
EXT2_FEATURE_COMPAT_EXCLUDE_BITMAP. Also reserve fields in the
superblock and the inode for the checksums. In the block group
descriptor, reserve the exclude bitmap field for the snapshot feature,
and checksums for the inode and block allocation bitmaps.
With this commit, the metadata checksum and exclude bitmap features
should have reserved all of the fields they need in ext4's on-disk
format.
This commit also fixes an a missing byte swap for s_overhead_blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Amir Goldstein <amir73il@gmail.com>
If the blocks of a filesystem is a multiple of blocks_per_group,
blocks of the ending group is computed wrongly. Use the
new ext2fs_group_blocks_count() helper instead.
Eric Sandeen: Converted to use new blocks per group helper
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If '-n' option is specified there should be no changes made to the file
system hence we should not attempt to discard the file system. This
commit adds a check into the e2fsck_discard_blocks() condition so it skip
discard if E2F_OPT_NO flag is set.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently the bigalloc implementation in the kernel requires extents,
but this restriction might get relaxed in the future. Also, old
versions of mke2fs that supported bigalloc during early testing
created the root and lost+found directories without using
extent-mapped inodes. This makes it possible for e2fsck to better
support these old legacy file systems if it comes across them.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystems with a blocksize of 1024 have the superblock starting at
block #1. However, the first data block in the superblock is 0 to
simplify the cluster calculations. So we must compensate for this in
a number of places, mostly in the ext2fs library, but also in e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Treat the s_blocks_count field in the superblock as a free block count
(instead of the number of free clusters) for bigalloc file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 2a77a784a3 (firest released in e2fsprogs 1.33) compared
superblock summary free blocks and inode counts with the allocation
bitmap counts before starting the file system check proper, and if
they differed, set the superblock and marked it as dirty. If no other
file systme changes were required, this would cause a "*** FILE SYSTEM
WAS MODIFIED ***" message without any explanation of what e2fsck had
changed.
We fix this by only setting the superblock summary free block/inodes
counts if we are skipping a full check, and in non-preen mode, e2fsck
will now print an explicit message stating how the superblock had been
updated.
In a full check, any updates to the superblock free blocks/inodes
fields will be noted in pass5.
This change requires changing a few test results (essentially
reversing the changes made in commit 2a77a784a3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The code which simulated handling uninitialized block bitmaps didn't
take bigalloc file systems into account correctly. Fix it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The write_journal_inode() code is only setting the low 32-bit i_size
for the journal size, even though it is possible to specify a journal
up to 10M blocks in size. Trying to create a journal larger than 2GB
will succeed, but an immediate e2fsck would fail. Store i_size_high
for the journal inode when creating it, and load it upon access.
Use s_jnl_blocks[15] to store the journal i_size_high backup. This
field is currently unused, as EXT2_N_BLOCKS is 15, so it is using
s_jnl_blocks[0..14], and i_size is in s_jnl_blocks[16].
Rename the "size" argument "num_blocks" for the journal creation functions
to clarify this parameter is in units of filesystem blocks and not bytes.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I had an extremely corrupted customer filesystem which, after thousands
of lines of e2fsck output, found one more problem on an immediately
subsequent e2fsck. In short, a file had had its i_file_acl block
cloned due to being a duplicate. That ultimately got cleared
because the fs did not have the xattr feature, and the inode
was subsequently removed due to invalid mode.
The 2nd e2fsck pass found the cloned xattr block as in use, but
not owned by any file, and had to fix up the block bitmaps.
Simply skipping the processing of duplicate xattr blocks on a
non-xattr filesystem seems reasonable, since they will be cleared
later in any case.
(also fix existing brace misalignment)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for specifying 'reserved_ratio' (percent blocks
reserved for super user, same as '-m' command line option) in mke2fs.conf.
It adds profile_get_double function in profile.c that allows reading
floating point values from profile files.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A user received the "file system is mounted; do you really want to
continue" prompt, and then instead of typing "n" for no, forgot that
he hadn't declined to continuation question, and typed the up-arrow
key, which in his locale, the 'A' in "^[[A" was interpreted as "yes",
and he lost data.
This was clearly the user's fault, but to make e2fsck a bit safer
against user stupidity/carelessness, we will change the "fs is
mounted; continue?" prompt to default to no, and treat the escape
character (along with the return and space characters, currently) as a
request for the default answer.
Addresses-Debian-Bug: #619859
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a few typos in manpages.
Reported-by: Branislav Náter <bnater@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds the superblock fields needed so that dumpe2fs works and the
code points and renames the superblock fields from describing
fragments to clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for detecting the new 'quota' feature in ext4.
The patch reserves code points for usr and group quota inodes and also
for the feature flag EXT4_FEATURE_RO_COMPAT_QUOTA.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Flags used during RHEL/Fedora builds lead to a couple type-punning
warnings:
recovery.c: In function 'do_one_pass':
recovery.c:539: warning: dereferencing type-punned pointer will break strict-aliasing rules
./csum.c: In function 'print_csum':
./csum.c:170: warning: dereferencing type-punned pointer will break strict-aliasing rules
The two changes below fix this up.
Note that the csum test binary output changes slightly, but this does
not break any tests.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As recently discussed on linux-ext4@vger.kernel.org add an option to e2fsck
to allow to replay the journal only. That will allow scripts, such as
pacemakers 'Filesystem' RA to first replay the journal and if that sets
an error state from the journal replay, further check for that error
(dumpe2fh -h | grep "Filesystem state:") and if that shows and error
to refuse to mount. It also allows automatic e2fsck scripts to first
replay the journal and on a second run after the real pass1 to passX checks
to test for the return code.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the user specifies "e2fsck -j UUID=XXX", e2fsck should do blkid
interpretation, since e2fsck does it with the base file system name.
So from the sake of consistency and user convenience, we should do it
here too.
Addresses-Debian-Bug: #559315
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The boolean options "force_no" in the problems stanza of e2fsck.conf
allows a particular problem code be treated as if the user will answer
"no" to the question of whether a particular problem should be fixed
--- even if e2fsck is run with the -y option.
As an example use case, suppose a distribution had widely deployed a
version of the kernel where under some circumstances, the EOFBLOCKS_FL
flag would be left set even though it should not be left set, and a
customer had a workload which exercised the fencepost error all the
time, resulting in many large number of inodes that had EOFBLOCKS_FL
set erroneously. Enough, in fact, the e2fsck runs were taking too
long. (There was such a bug in the kernel, which was fixed by commit
58590b06d in 2.6.36).
Leaving EOFBLOCKS_FL set when it should not be isn't a huge deal, and
is certainly than having high availability timeout alerts going off
left and right. So in this case, the best fix might be to put the
following in /etc/e2fsck.conf:
[problems]
0x010060 = { # PR_1_EOFBLOCKS_FL_SET
force_no = true
no_ok = true
no_nomsg = true
}
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes two possible causes for the error message:
WARNING: PROGRAMMING BUG IN E2FSCK!
OR SOME BONEHEAD (YOU) IS CHECKING A MOUNTED (LIVE) FILESYSTEM.
inode_link_info[X] is Y, inode.i_links_count is Z. They should be the same!
One cause which can trigger this message is when an inode has an
illegal link count > 65500 --- for example, 65535. This was the case
in the Debian Bug report #555456.
Another cause which could trigger this message is if an ext4 directory
previously had more than 65000 subdirectories (thus causing
i_link_count to be set to 1), but then some of the subdirectories were
deleted, such that i_link_count should now be the actual number of
subdirectories.
Addresses-Debian-Bug: #555456
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Clarify the e2fsck.conf(5) man page to make it clear that it applies
for ext4 file systems.
Addresses-Debian-Bug: #591083
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In Pass 5 when we are checking block and inode bitmaps we have great
opportunity to discard free space and unused inodes on the device,
because bitmaps has just been verified as valid. This commit takes
advantage of this opportunity and discards both, all free space and
unused inodes.
I have added new set of options, 'nodiscard' and 'discard'. When the
underlying devices does not support discard, or discard ends with an
error, or when any kind of error occurs on the filesystem, no further
discard attempt will be made and the e2fsck will behave as it would
with nodiscard option provided.
As an addition, when there is any not-yet-zeroed inode table and
discard zeroes data, then inode table is marked as zeroed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This prevents accidentally replaying and resetting the journal while
it is mounted, due to an accidental attempt to run e2fsck on an LVM
snapshot of a file system with an external journal.
Addresses-Debian-Bug: #587531
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For file systems with 64-bit block numbers, we need to make sure we
correct the i_blocks_hi field as well as the i_blocks field when
setting it to the correct value.
Thanks to Justin Maggard for pointing this out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When a device name is misspelled, we output the full text about specifying
alternate superblock. This is slightly misleading because when the device
cannot be open because of ENOENT, this certainly won't help. So just print
that device does not exist and exit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 641b66b fixed a floating point precision error which can result
in a search algorithm looping forever. It can also result in an array
index being out of bounds and causing a segfault. Here are two more
cases in e2fsck and resize2fs that need to be fixed. I've just used
the same fix from the that commit.
Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where the original superblock and the backup superblock
are both invalid in some way, e2fsck will try to go back to the
orignal superblock. To do that, it must close the attempted open
using the backup superblock first (since otherwise the exclusive open
will prevent the subsequent open from succeding).
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The getopt() function returns an int, not a char. On systems where the
default char is unsigned (like ppc), we get weird behavior where -1 is
truncated to 0xff but compared to (int)-1.
Also fix this same bug for two test programs, test_rel and iscan,
which aren't currently used at the moment.
Addresses-Gentoo-Bug: #299386
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add superblock fields which track where and when the first and most
recent file system errors occured. These fields are displayed by
dumpe2fs and cleared by e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This test, added to e2fsprogs-1.41.12, is backwards.
If EOFBLOCKS is set, then the size -should- be less than
the last physical block...
xfstests 013 caught this.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It's a bad idea to set the checksums if e2fsck is aborted by the user,
and it often causes an error message, "Inode bitmap not loaded while
setting block group checksum info".
Addresses-Launchpad-Bug: #582035
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These options allow e2fsprogs to be built using symlinks instead of
hard links, and to be installed using symlinks instead of hard links,
respectively.
Addresses-Sourceforge-Bug: #1436294
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where s_first_data_block is 1, we need to explictly reject
an extent whose starting physical block is zero.
Thanks to Jiaying Zhang <jiayingz@google.com> for finding this bug.
Addresses-Google-Bug: #2573806
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a corrupted file system causes us to want to delete an extent, and
that causes us to want to release a block in e2fsck pass #1, it would
be preferable if e2fsck didn't seg fault. This tends to get users
craky, as users are wont to do. :-)
Thanks to Dirk Reiners for reporting this bug:
e2fsck crashes fixing a corrupted 3.5 TB filesystem:
0x0000000000432002 in ext2fs_unmark_generic_bitmap (bitmap=0x0, bitno=623386749)
at gen_bitmap.c:183
183 if ((bitno < bitmap->start) || (bitno > bitmap->end)) {
(gdb) bt
bitno=623386749) at gen_bitmap.c:183
block=623386749) at ../../lib/ext2fs/bitops.h:319
inuse=-1) at alloc_stats.c:78
extent.c:1509
pb=0x7fffffffdfe0, start_block=0, ehandle=0x6dcf50) at pass1.c:1709
pb=0x7fffffffdfe0, start_block=0, ehandle=0x6dcf50) at pass1.c:1737
pctx=0x7fffffffe100, pb=0x7fffffffdfe0) at pass1.c:1842
block_buf=0x6c4330 "\373\212#") at pass1.c:1920
The source of the NULL bitmap is fs on stack frame 2:
(gdb) up 2
inuse=-1) at alloc_stats.c:78
78 ext2fs_unmark_block_bitmap(fs->block_map, blk);
Addresses-SourceForge-Bug: #2971800
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are broken embedded devices that have system clocks that always
reset to January 1, 1970 whenever they boot (even if no power is
lost). There are also systems that have super cheap clock crystals
that can be very inaccurate. So if the option broken_system_clock is
given, disable all time based checks. E2fsck will also try to detect
incorrect system clock times, and automatically mark the system clock
as insane.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Justin reported that creating a 4T file with posix_fallocate led
to fsck errors:
e2fsck 1.41.10 (10-Feb-2009)
Pass 1: Checking inodes, blocks, and sizes
Inode 12, i_blocks is 8589935432, should be 840. Fix? yes
This looks like a 32-bit overflow.
commmit 8a8f36540b added handling of
the high i_blocks number, but we accumulate blocks in the num_blocks
field, and that's still just 32 bits.
Note: we don't need to expand max_blocks for now, that's only used
in the non-extents case, and those files have smaller max sizes.
I haven't been able to replicate the problem, oddly, but Justin
reports that this patch fixed his situation.
Reported-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For a filesystem that fails with:
journal_bmap: journal block not found at offset 7334 on loop0
JBD: bad block at offset 7334
e2fsck won't actually fix this; it will mark the fs as clean,
so it will mount, but it does not fix that block, and when the
journal reaches this point again it will fail again.
The following simple change to process_journal_block() might be
a little drastic; it will clear & recreate the journal inode if
it's sparse - i.e. if it gets block 0.
I suppose we could be more complicated and try to replay the journal
up to the error, but I'm not sure it's worth it since we're fscking
it anyway.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There were a number of problems that were prompting the user whether
or not to ABORT, but then would abort regardless of whether the user
answered yes or no. Change those to be PROMPT_NONE, PR_FATAL.
Also, fix PR_1_RESIZE_INODE_CREATE so that it recovers appropriately
after failing to create the resize inode. This problem now uses
PROMPT_CONTINUE instead of PROMPT_ABORT, and if the user says, "no",
the code will abort.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 6267ee4 avoided repeating pass #1 over and over again if
multiple block groups are found with inodes in the bg_itable_unused
region during pass #2. This caused a regression because the problem
with not restarting pass #1 right away is that e2fsck will offer to
clear directory entries for inodes that are deleted, and e2fsck can't
easily distinguish between deleted inodes and inodes that were skipped
because of an incorrect bg_itable_unused value. So once an inode is
found in an unused region and we know that we're going to restart the
e2fsck pass, don't offer to clear any deleted inodes --- since those
will be caught in the second round.
Addresses-Google-Bug: #2642165
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some kernels will crash if EOFBLOCKS_FL is set when it is it not
needed, and this if it is left set when it isn't needed, it is a sign
of a kernel bug.
Addresses-Google-Bug: #2604224
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This reverts commit 0ea910997b.
Since the Linux kernel now has support for the EXT4_EOFBLOCKS_FL flag
starting in 2.6.34, we don't need this workaround any more.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a corrupted file system causes us to want to delete an extent, and
that causes us to want to release a block in e2fsck pass #1, it would
be preferable if e2fsck didn't seg fault. This tends to get users
craky, as users are wont to do. :-)
Thanks to Dirk Reiners for reporting this bug:
e2fsck crashes fixing a corrupted 3.5 TB filesystem:
0x0000000000432002 in ext2fs_unmark_generic_bitmap (bitmap=0x0, bitno=623386749)
at gen_bitmap.c:183
183 if ((bitno < bitmap->start) || (bitno > bitmap->end)) {
(gdb) bt
bitno=623386749) at gen_bitmap.c:183
block=623386749) at ../../lib/ext2fs/bitops.h:319
inuse=-1) at alloc_stats.c:78
extent.c:1509
pb=0x7fffffffdfe0, start_block=0, ehandle=0x6dcf50) at pass1.c:1709
pb=0x7fffffffdfe0, start_block=0, ehandle=0x6dcf50) at pass1.c:1737
pctx=0x7fffffffe100, pb=0x7fffffffdfe0) at pass1.c:1842
block_buf=0x6c4330 "\373\212#") at pass1.c:1920
The source of the NULL bitmap is fs on stack frame 2:
(gdb) up 2
inuse=-1) at alloc_stats.c:78
78 ext2fs_unmark_block_bitmap(fs->block_map, blk);
Addresses-SourceForge-Bug: #2971800
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the user grows a partition bigger than 2**32 blocks, e2fsprogs
1.41.x is not going to be able to support resizing the filesystem,
since it doesn't have > 2**32 block support. However, e2fsck should
still work, so the system administrator doesn't get stuck.
Addresses-Launchpad-Bug: #521648
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I guess the message wasn't scary enough for users who are just smart
enough to really get themselves in deep doo-doo. Let's make it even
scarier.
Addresses-Launchpad-Bug: #537483
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A user was surprised when -n -D caused the file system to be opened
read/write, and then outsmarted himself when e2fsck asked the question:
WARNING!!! Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.
Do you really want to continue (y/n)?
This is partially our fault for not documenting the fact that -D
overrode opening the filesystem read-write. But the bottom line is it
much safer if -n *always* opens the file system read-only, so there
can be no confusion. This means that we have to disable certain
combination of options, such as "-n -c", "-n -l", and "-n -L", and
"-n -D", but the utility of these combinations is pretty low, and
is more than offset by making e2fsck idiot-proof.
Addresses-Launchpad-Bug: #537483
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is the userspace side of Jiaying's EOFBLOCKS patch. With
Aneesh's patches for .33, Jiaying's patch, and this one, xfstests
013/fsstress (even with direct IO enabled) has held up through many
runs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsprogs 1.41.10 introduced a regression (in commit b71e018) where
e2fsck -fD can corrupt non-indexed directories when are exists one or
more file names which alphabetically sort before ".". This can happen
with ext2 filesystems or for small directories (take less than a
block) which contain filenames that begin with a space or some other
punctuation mark.
Fix this by making sure we never reorder the '.' or '..' entry in the
directory, since they must be first.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o