Warn the system administrator if there is an existing file system on
the block device, and give the administrator an opportunity to abort
the mkfs operation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If mke2fs needs to ask the user for permission, and the user doesn't
type anything the specified delay in the /etc/mke2fs.conf file,
proceed as if the user had said yes. The default is to do what we
currently do, which is to wait until the user answers the question one
way or the other.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't ask the user if it's OK that a regular file is smaller than the
requested size. This test only makes sense if we are creating the
file system on a block device. This allow users to not need to
manually answer the "proceed?" question when creating a file system
backed by a simple file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the call to proceed_question() from check_plausibility() to its
caller. This allows more fine grained control by mke2fs about when it
might want to call check_plausibility().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Very often people are creating file systems using regular files, so we
shouldn't ask the user to confirm using the proceed question.
Otherwise it encourages users to use the -F flag, which is a bad
thing.
We do need to continue to check if the external journal device is a
block device.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We already skip the low dtime check if the number of inods is greater
than the last mount or last written time. However, if a very large
file system is resized sufficiently large that the number of inodes is
greater than when the file system was original created, we can end up
running afoul of the low dtime check. This results in a large number
of false positives which e2fsck can fix up without causing any
problems, but it can induce a large amount of anxiety for the system
administrator.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Patrik Horník <patrik@hornik.sk>
Old distros may not have the "truncate" tool, so use "dd" instead.
If tmpfs cannot handle a 2GB temp file (e.g. old RHEL5 and SLES 11
kernels) then skip the test instead of failing it. If this fails,
try to report better error messages instead of failing silently.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix various unused variable and use-uninitialized warnings.
Add generated files into .gitignore.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This allows e4defrag to work with 64-bit and bigalloc file systems.
Signed-off-by: Jon Ernst <jonernst07@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since auto_64-bit_support is on by default, resize_inode feature will
be disabled when creating a >16T ext4 according to mke2fs.conf(5).
This should also be done when making ext4 with "-O 64bit" to enable
64bit feature explicitly. Otherwise online resize to enlarge a
over-16T fs to larger would fail.
[root@localhost resize]# truncate -s 50t fs.img
[root@localhost resize]# losetup /dev/loop0 fs.img
[root@localhost resize]# mkfs -t ext4 -O 64bit /dev/loop0 30t
[root@localhost resize]# mount /dev/loop0 mnt
[root@localhost resize]# resize2fs /dev/loop0
resize2fs 1.42.7 (21-Jan-2013)
Filesystem at /dev/loop0 is mounted on /root/resize/mnt; on-line resizing required
old_desc_blocks = 3840, new_desc_blocks = 6400
resize2fs: Invalid argument While checking for on-line resizing support
And dmesg shows
[688378.442623] EXT4-fs (loop0): resizing filesystem from 6710886400 to 13421772800 blocks
[688378.443216] EXT4-fs warning (device loop0): verify_reserved_gdb:700: reserved GDT 3201 missing grp 177147 (5804756097)
[688378.443222] EXT4-fs (loop0): resized filesystem to 8858370048
[688378.528451] EXT4-fs warning (device loop0): ext4_group_extend:1710: can't shrink FS - resize aborted
With this fix resize2fs could do the online enlarge correctly.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There is no reason to use e2fsck_global_ctx in
e2fsck_set_bitmap_type(), since we can get the context structure from
fs->priv_data.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsck_global_ctx varible was only being set if HAVE_SIGNAL_H is
defined. There are systems, such as Android, where this is not true.
This was causing e2fsck_set_bitmap_type() to seg fault since
e2fsck_global_ctx was not NULL.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: JP Abgrall <jpa@google.com>
Previous commit which introduced SKIP_UDEB variable had typos in the
variable name in the m4 macros of control.in (UDEV vs. UDEB.) Fix those
typos and fix m4 quoting problem in "Don't".
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we're moving blocks around the filesystem, ensure that freeing
the old blocks only frees the clusters if they're not in use by other
metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When freeing a block group descriptor block, be careful not to free
metadata clusters belonging to other groups!
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This fix is similar to 66457fcb for tune2fs. When booting from a root
filesystem with an empty UUID which fsck fixes the following remount
step reliably fails, leaving the filesystem in an inconsistent state.
Like the tune2fs fix this patch resolves the issue by simply refusing to
update the UUID if the filesystem is mounted.
Signed-off-by: Michael Marineau <michael.marineau@coreos.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
To check the coverage of e2fsprogs's regression test, do the
following:
configure --enable-gcov
make -j8 ; make -j8 check ; make coverage.txt
The coverage information will be the coverage.txt and *.gcov files in
the build directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_free() does not set the ext2_filsys pointer to null so the
caller is responsible to setting it himself if it is needed.
This patch fixes some places where caller did not set ext2_filsys
pointer to NULL after ext2fs_free() which might result in use after
free. Fix it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Jim pointed out that "tune2fs -f -O ^has_journal" won't remove the
journal if the needs_recovery flag is set; the manpage seems to indicate
that it should. And if you've lost an external journal and can no longer
replay it, how should one proceed?
Change tune2fs so that two "-f" options will allow removal of a dirty
journal from a filesystem, even if the filesystem needs recovery.
e2fsck can then do its best to pick up the pieces.
Addresses-Debian-Bug: #559301
Reported-by: Jim Faulkner <james.faulkner@yale.edu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After commit 62f17f3603, variable
"handle" has no use. So delete it.
Signed-off-by: Jon Enrst <jonernst07@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The locally defined versions of both sync_file_range and fallocate are broken
on 32bit systems. On these systems two 32bit registers are needed for each
64bit parameter. Also, sync_file_range on MIPS32 needs a dummy parameters
after the fd parameter. Just leave all these subtleties to the C library.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Declare struct_io_manager at the end of unix_io.c, undo_io.c, and
test_io.c files so that there isn't a need to forward declare every
member of this structure. That avoids a lot of redundant code
at the start of every one of these files.
Move the test_flush() function above test_abort() to avoid the need
for a forward declaration.
Fix a few instances of space before tab in these files.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The "mkswap" program is not available on MacOS, so just use the
existing swap0.img.bz2 and swap1.img.bz2 files directly.
Because MacOS HFS+ doesn't support sparse files (welcome to the 80's)
the m_bigjournal test takes forever to zero out the whole 42GB test
filesystem. Skip this test for Darwin kernels for now.
Unfortunately, neither "df -T" nor "stat -f -c %T" is available on
MacOS to directly determine the filesystem type, and I'm too lazy
to parse the output of "mount" and match it to the path of the test
directory in shell, so it just checks the kernel type and assumes
the filesystem type is HFS and skips the test.
Since this test runs on Linux the majority of the time, the loss of
test coverage is minimal. If MacOS should ever get a real filesystem,
this can be revisited.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a number of non-literal string format warnings from LLVM due
to the use of _() that were not fixed in commit 45ff69ffeb.
Fix mismatched int vs. __u64 format warnings in blkmap64_rb.c.
There were also some comparisons of __u64 start or count <= 0.
Change them to be comparisons == 0, or start + count overflow.
Fix operator precedence warning for (value & (value - 1) != 0)
introduced in 11d1116a7c. It seems "&" is lower precedence
than "!=", so the above didn't fail for power-of-two values,
but only odd values. Fortunately, either s_desc_size nor
s_inode_size is valid if odd.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext4 file system also supports to set/clear 'j' attribute, but it just
say that this option is only useful for ext3 in manpage. This commit
fixes it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
In C++, "private" is a reserved keyword, so don't use it in the header
file as a function parameter name.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a client asks us to remap a block in the middle of an extent, we
potentially have to allocate a fair number of blocks to handle extent
tree splits. A failure in either of the ext2fs_extent_insert calls
leaves us with an extent tree that no longer maps the logical block in
question and everything that came after it! Therefore, try to roll
back the extent tree changes before returning an error code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we're doing a BMAP_ALLOC allocation and the extent tree update
fails, there's no point in hanging on to the newly allocated block.
So, free it to make fsck happy.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When modifying/removing an extent during punch, don't forget to update
the extent's parents.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we're iterating extents during a punch operation, the loop exits
if the punch region is entirely to the right of the extent we're
looking at. This can happen if the punch region starts in the middle
of a hole and covers mapped extents. When this happens, we want to
skip to the next extent, because it might be punchable.
Also, if we've totally passed the punch range, stop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Refactor the running kernel version checks to hide the details of
version code checking, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When meta_bg feature is enabled, group descriptor block is allocated
every 128 block group (or every 64 block group if 64bit feature is
enabled).
In such situation, files in block group more than #128 will be removed
if sparse_super feature is enabled with tune2fs and afterwards
necessary e2fsck running.
Because tune2fs does not reallocate group descriptor blocks but just
set sparse_super feature. If ext4 has sparse_super,
ext2fs_descriptor_block_loc2() called by e2fsck thinks the block group
(e.g. #128) that it has group descriptor block at the head offset. But
that offset is used as backup super block before. So e2fsck fixes
ext4 based on invalid group descriptor blocks and this cause data
lost.
The patch avoids this problem simply by disallow tune2fs enabling
sparse_super if meta_bg is enabled.
Steps to reproduce:
1. Create ext4 which has meta_bg, ^sparse_super and 129+ block groups.
# mke2fs -t ext4 -O meta_bg,^resize_inode,^sparse_super DEV 17G
# mount DEV /MP
2. Create direcotry and files which use block group #128's metadata.
# echo $((8192*128+1)) > /sys/fs/ext4/DEV/inode_goal
# mkdir /MP/DIR
# for i in $(seq 1 100); do dd if=/dev/urandom of=/MP/DIR/file$i bs=1024 count=10; done
3. Enable sparse_super with tune2fs then execute e2fsck.
Data in block group #128 will be lost!!
# umount DEV
# tune2fs -O sparse_super DEV
# e2fsck/e2fsck -yf DEV
Signed-off-by: Akira Fujita <a-fujita@rs.jp.ne.cocm>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Setting SKIP_UDEBS=yes in rules.custom will prevent the debian/rules
makefile from building the udeb files for the debian installer.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Interpret "zero_hugefiles" relation in mke2fs.conf as a boolean value,
as documented in the man page.
If the hugefile is larger than 2GB, set the large_file file system
feature so e2fsck doesn't complain.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit becb01ce84 breaks building e2fsprogs with dpkg 1.15.8 which is
used in Debian 6.0 (Squeeze), since it doesn't support package
specifications qualified with an architecture (i.e., "dpkg-query -W
libblkid1:amd64").
Debian only needs to use its own version of libblkid and libuuid for
versions of Debian 5.0 (Lenny) or before. So default to using
util-linux-ng, instead of trying to test the version number of
libblkid1.
Lenny was released in February, 2009, and the current stable Debian
release is 7.x, so it is two stable releases back as of February 2014.
In the unlikely case someone needs to build a modern version of
e2fsprogs on a version of Debian which is five years old or older, can
create the file Debian/rules.custom with the line:
UTIL_LINUX_NG = no
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also use angle brackets for the #include of dirpaths.h to avoid the
need to manually massage the Makefile.in for the util directory. This
is needed because we have to create a fake dirpaths.h file in the util
directory. The fake dirpaths.h file is rquired to break the circular
dependency caused by util/subst creating dirpaths.h, while
util/subst.c is including config.h, which includes dirpaths.h.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The getopt() function will never let optarg be NULL (at least without
using the GNU double-colon extension, which we don't use because it's
not portable), so don't bother checking for that case. It's harmless,
but it triggers a Coverity warning elsewhere, since it thinks optarg
could in fact be NULL.
Addresses-Coverity-Id: #1049156
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Initialize the on-disk structure before we fill it in, to avoid the
following valgrind warning:
Conditional jump or move depends on uninitialised value(s)
at 0x4323A8: qtree_entry_unused (quotaio_tree.c:40)
by 0x431218: v2r1_mem2diskdqblk (quotaio_v2.c:85)
by 0x432409: qtree_write_dquot (quotaio_tree.c:336)
by 0x431136: v2_commit_dquot (quotaio_v2.c:264)
by 0x42FB63: quota_write_inode (mkquota.c:126)
by 0x408BE6: create_quota_inodes (mke2fs.c:2466)
by 0x409A2D: main (mke2fs.c:2850)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o