In addition to the free blocks and free inodes, also print the number
of blocks and inodes in the verbose statistics.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Disks have gotten bigger, so 8 digits might not be enough. Allow for
12 digits worth of blocks, which is more than enough for 3 petabytes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add report_time, report_verbose, and report_features options to
e2fsck.conf which enable additional, more verbose reporting by e2fsck.
This is useful for large cloud installations where there are a large
number file systems being managed, and where it may not be obvious
from the e2fsck log files exactly how a particular file system is
configured.
The report_time and report_verbose options, which are the same as the
-tt and -v command line options, respectively, are useful because they
are options specific to e2fsck, and the fsck program does not have a
way of passing certain options only to a specific /sbin/fsck.<fstype>
program.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The following commands:
dd if=/dev/zero of=/tmp/foo count=1 ibs=$(( 256 * 1024 * 1024 ))
mke2fs -N 256 -t ext4 /tmp/foo
... will cause mke2fs to write until it fills the device. The cause
for this is that the explicit request for 256 inodes causes the number
of inodes per block group to be 8. The ext2fs_initialize() function
assumed that all of the reserved inodes would be in the first block
group, which is not true in this case. This caused the number of
uninitialized inodes in the first block group to be negative, which
then resulted in mke2fs trying to zero out a very large number of
blocks. Oops.
Addresses-Sourceforge-Bug: #3528892
Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When checking to see whether or not a new name is unique, the code was
using the wrong length parameter, which could cause the anti-collision
loop for a long time trying to find what it thinks is a unique name.
Addresses-Sourceforge-Bug: #3540545
Reported-by: Vitaly Oratovsky <vmo@users.sourceforge.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ELF_OTHER_LIBS usually contains local search dirs (-L ../..), but it
was added in link command after system search dirs from LDFLAGS.
Libraries and executables were linked with the system libraries if
present, and possibly using static archives instead of shared
libraries.
It could also make final executable link to fail when shared libraries
are enabled: if libext2fs.so is linked with a static libcom_err.a from
system, build system would attempt to link without -lpthread.
This fixes the issue by moving ELF_OTHER_LIBS before LDFLAGS in the
link command.
Addresses-Sourceforge-Bug: #3542572
Reported-by: Olivier Blin <blino@users.sourceforge.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If package foo:i386 depends on e2fsprogs, without Multi-Arch: foreign
statetment, the i386 version of e2fsprogs will be installed. By
setting the foreign field, the already installed (in this example
amd64) e2fsprogs package is enough to satisfy the dependency.
The M-A: foreign field is ignored in pre-multiarch systems, so ifdeffing
it using macros should be unnessary.
Addresses-Debian-Bug: #678395
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously e2fsck would only allow a mounted file system to be checked
if it was the root file system and it was mounted read-only. Now
allow any file system mounted read-only if the -f option is specified.
This makes it easier to test how e2fsck handles checking file systems
which are mounted without having to test on the root file system.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This reverts commit 47c1b8e166.
The original reason for this commit was to speed up boots for hard
drives. However, I've measured the time difference on a 1TB laptop
drive, and it's not significant: 70ms vs 10ms when running e2fsck on a
clean file system.
The problem with this optimization is that we don't notice if the
journal superblock has a non-zero s_errno field. If we don't transfer
the error indicator from the journal superblock to the file system
superblock, then the kernel will transfer it when the file system is
remounted read-write, causing scary messages to appear in the syslog.
(And since there was a bug in the kernel code which didn't clear the
error indicator in the journal superblock, it would never get
cleared.)
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Device nodes are commonly accessed via symlinks, i.e.
lrwxrwxrwx. 1 root root 7 Jul 19 13:01 /dev/mapper/testvg-testlv -> ../dm-0
Today, e4defrag on such a device will fail:
File is not regular file
"/dev/mapper/testvg-testlv"
due to it being a link, and e4defrag on the link target does as well:
Filesystem is not mounted
due to the target not being found in /etc/mtab.
Fix this by checking whether the symlink target is a block device
and if so, using that device in main(), and also changing get_mount_point()
to search for a matching device number, not device name.
Addresses-Red-Hat-Bugzilla: #707209
Reported-by: Peter Hjalmarsson <xake@rymdraket.net>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
filefrag on a virtual fs like proc segfaults:
Floating point exception
because stat.f_blocks is 0, so the calculation of cylgroups is 0,
which leads to a divide by 0 when calculating expected extents.
Since it's only used for ext2 filesystems anyway, just move
the calculation of expected under "if (is_ext2)" to fix this.
Reported-by: Max Beikirch <maxnet@onlinehome.de>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
filefrag has several bugs:
1.
$ touch f1
$ filefrag f1
f1: 1 extent found ----> bug!
$ filefrag -v f1
Filesystem type is: ef53
File size of f1 is 0 (0 blocks, blocksize 4096)
f1: 0 extents found
2.
$ truncate -s 1m f2
$ filefrag f2
f2: 1 extent found ----> bug!
$ filefrag -v f2
Filesystem type is: ef53
File size of f2 is 1048576 (256 blocks, blocksize 4096)
f2: 0 extents found
3.
$ for i in `seq 11 -2 0`; do dd if=/dev/zero of=f4 bs=4k count=1 seek=$i conv=notrunc oflag=sync &>/dev/null; done
$ ll f4
-rw-r--r-- 1 root root 49152 Jun 9 15:09 f4
$ filefrag f4
f4: 7 extents found
$ filefrag -v f4
Filesystem type is: ef53
File size of f4 is 49152 (12 blocks, blocksize 4096)
ext logical physical expected length flags
0 1 1109993 1
1 3 1109992 1109994 1
2 5 1109991 1109993 1
3 7 1109990 1109992 1
4 9 1109989 1109991 1
5 11 1108207 1109990 1 eof
f4: 7 extents found -----------------------> but we only have 6 extents, bug!
All of these bugs come from the fact that we've made a mistake on
calculating total extents:
o we set 1 as default for 'total extents', and this will report 1
extent found even when we don't get any extent from fiemap.
o if our first extent does not start from 0(logical addr), total
extents will be one more than what it should be.
Addresses-Red-Hat-Bugzilla: #840848
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The logsave program is leaking a file descriptor when it forks and
execs the program which forks a process which hangs around. In the
case of /etc/init.d/checkroot, this would be fsck. This file
descriptor never gets closed, so it's still present when fsck runs
e2fsck, and then if e2fsck has its own logging enabled using (in
/etc/e2fsck.conf):
[options]
log_dir = /mnt
log_filename = e2fsck-%N.%h.INFO.%D-%T
log_dir_wait = true
then e2fsck will fork off a process waiting for /mnt to get remounted
read/write. This causes logsave to never get an EOF from its pipe, so
it hangs waiting for the read to fail --- which won't happen due to
the file descriptor leak which is still being held open by e2fsck's
forked child process. And so /etc/init.d/checkroot hangs, and the
root file system never gets remounted read/write, and we deadlock.
Fix the problem by closing the pipe fd so the logsave program doesn't
end up leaking it to its descendent processes.
Addresses-Debian-Bug: #682592
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the last quota inode is removed, the 'quota' feature
flag was not removed from superblock in some cases.
Ex:
$ mke2fs -t ext4 -O quota <dev> # creates both usr & grp
# quota inodes
$ tune2fs -Q ^usrquota <dev> # removes usr quota inode
$ tune2fs -Q ^grpquota <dev> # removes grp quota inode,
# but the 'quota' feature flag
# was not removed from superblock
This patch removes the 'quota' feature flag from superblock
if none of the quota inodes are set.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If user chooses to not fix quota info, then the FS should be
marked as having errors. PR_NO_OK prevented this from happening.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We failed to clear EXT2_FLAG_SUPER_ONLY after deleting the
quota inode and so, the updated block bitmap was not written
back. This caused fsck to complain after running
'tune2fs -O ^quota <dev>'. Clear this flag so that updated
block bitmap gets written. Also, avoid truncating the quota
inode if it is not hidden.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently 'tune2fs -O quota <dev>' will try to use existing
quota files and write their inode numbers in the superblock.
Next e2fsck run then converts these into hidden quota inodes
(ino #3 & #4). But this approach has problems:
1) Before e2fsck run, the inodes are visible to the user and
might get corrupted or removed or replaced by the user.
2) Since these are user visible, we have to include
their block usage in the quota accounting. But once
these inodes are hidden, e2fsck will have to decrement
their usage from the quota accounting (which e2fsck
currently doesn't do and instead reports error).
(the following used to give e2fsck error previously:
# assume <dev> has aquota.user & aquota.group files
$ tune2fs -O quota <dev> # stores ino# of quota files in
# ext4 superblock
$ e2fsck -f <dev> # hides quota files, but now quota
# usage is incorrect.
<< quota errors >>
Instead of making e2fsck complicated, this patch creates the
hidden quota inodes at 'tune2fs -O quota' time iteself. The
usage is computed freshly and limits are copied from the
aquota.user and aquota.group files as earlier.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a batch of files/wildcards to the list of ignored files, so
that "git status" does not show so many files that should be ignored.
The "*.dSYM" directories are generated during building on MacOS.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since "bool" is a valid C type, declarations of the form "int bool"
will cause compiler errors if <stdbool.h> is included. Rename these
variables to avoid this name clash.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The configure script uses the date string in version.h to calculate a
version date code. This only used for tagging prerelease tarball, so
it's not a big deal, but fix this for correctness' sake.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Build Log Hardening Check is a debian tool which scans the output
of a package build making sure that the security hardening flags are
used when compiling and linking all of binaries in a package.
For the most part we were passing CFLAGS, CPPFLAGS, and LDFLAGS down
to the compiler and link commands, but there there were one or two
exceptions. In addition, there where a few places in "make install"
where the V=1 option was not being honored, which triggered blhc
warnings since it couldn't analyze those commands.
The e2fsck.static was the only binary that was not getting built and
packaged with the hardening flags, but I've fixed all of the blhc
warnings so in the future it will be obvious if we regress.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The attempted inclusion of sys/quota.h is causing failures in when
building on the hurd and freebsd platforms for Debian. It's not
necessary any more, so just remove the #include.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The "mktemp" program requires a template on OS/X. Allow the test
TMPFILE to be created in the local /tmp directory for both OS/X
and Linux.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add two tests, f_orphan_indirect_inode, and f_orphan_extents_inode,
which tests the bug fixes in the two previous commits:
e2fsck: update global free blocks/inodes count when truncating orphan inodes
libext2fs: fix block iterator for extents when truncating inodes
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When e2fsck uses the block iterator to release the blocks in an
extent-mapped inode, when the last block in an extent is removed, the
current extent has been removed and the extent cursor is now pointing
at the next inode. But the block iterator code doesn't know that. So
when it tries to go the next extent, it will end up skipping an
extent, and so the inode will be incompletely truncated.
The fix is to go to the next extent before calling the callback
function for the current extent. This way, regardless of whether the
current extent gets removed, the extent cursor is still pointing at
the right place.
Reported-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
By the time we start processing the orphan inode list, we have already
calculated the total expected number of free blocks and inodes in
ctx->free_{blocks,inodes}. This is used to set the free blocks/inodes
count in the superblock in the case where we don't need to do a full
e2fsck.
We need to update these expected free block counts as we process the
orphan inode list so that superblock values are set correctly.
Otherwise we could have the following happen:
% e2fsck /tmp/test.img
e2fsck 1.42.3 (14-May-2012)
Truncating orphaned inode 12 (uid=0, gid=0, mode=0100644, size=0)
Setting free blocks count to 46 (was 79)
/tmp/test.img: clean, 12/16 files, 54/100 blocks
% e2fsck /tmp/test.img
e2fsck 1.42.3 (14-May-2012)
Setting free blocks count to 79 (was 46)
/tmp/test.img: clean, 12/16 files, 21/100 blocks
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Debugfs will now interpret date strings of the form @123 as 123
seconds after the start of the epoch. This is handy when editing an
orphan inode linked list using the inode's deletion time field.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If all of the extents in the last extent tree block (ETB) in a
non-trivial extent tree contain uninitialized extents which are after
the end of the file as defined by i_size, the hueristics will
incorrectly estimate the last entry (and hence the node's e_len field)
in the last entry of each level of the extent tree.
As Tao Ma has noted, since e2fsck was requiring that the length
(e_len) field of interior nodes be non-zero, this was causing false
failures where e2fsck would declare that the extent tree was
corrupted.
This was fixed in commit 9c40d14841: "e2fsck: only check for
zero-length leaf extents". Add a regression test case to ensure that
this issue remains fixed.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The on-disk format for interior nodes in the extent tree does not
encode the length of each entry in the interior node; instead, it is
synthesized/simulated by the extent library code in libext2fs.
Unfortunately, this simulation is not perfect; in particular it does
not work for the last extent in the extent tree if there are
uninitialized blocks allocated using fallocate with
FALLOC_FL_KEEP_SIZE, and it leads to e2fsck incorrectly complaining
about an invalid zero-length extent.
We only need to worry about the extent length for the leaves of the
tree, since it is there were we are checking an on-disk value, as
opposed to a software-generated simulation. So restrict the check of
extent length to leaf nodes in the extent tree.
Reported-by: Tao Ma <tm@tao.ma>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When libext2fs allocates/deletes an extent leaf, the i_blocks
value is incremented/decremented by fs->blocksize / 512. This
is incorrect in case of bigalloc. The correct way here is to
use cluster_size / 512.
The problem is seen if we try to create a large inode using
libext2fs (say using ext2fs_block_iterate3()) on a bigalloc
filesystem. fsck catches this and complains.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the file system is mounted read-only after a file system error has
been detected, the fact that an error occurred is written to the
journal. This is important because while the journal is getting
replayed, the error indication in the superblock may very well get
overwritten.
Unfortunately, the code to propagate the error indication from the
journal to superblock was broken because this was being done before
the old file system handle is thrown away and the file system is
re-opened to ensure that no stale data is in the file system handle.
As a result, the error indication in the superblock was never written
out.
To fix this, we need to move the check if the journal's error
indicator has been set after the file system has been freed and
re-open.
Reported-by: Ken Sumrall <ksumrall@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Quite some definitions in quota library are not necessary. Remove them.
Also fold quota.h file into quotaio.h since it didn't contain that many
definitions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a file system was remounted read-only after a file system
corruption is detected, and then that file system is mounted and
unmounted by the kernel, the journal would have been recovered, but
the kernel currently leaves the s_errno field still set. This is
arguably a bug, since it has already propgated the non-zero s_errno
field to the file system superblock, where it will be retained until
e2fsck has been run.
However, e2fsck should handle this case for existing kernel by
checking the journal superblock's s_errno field even if journal
recovery is not required.
Without this commit, e2fsck would not notice anything wrong with the
file system, but a subsequent mount of the file system by the kernel
would mark the file system's superblock as needing checking (since the
journal's s_errno field would still be set), resulting an full e2fsck
run at the next reboot, which would find nothing wrong --- and then
when the file system was mounted, the whole cycle would repeat again.
I had seen reports of this in the past, but it wasn't until recently
that I realized exactly how this had come about, since normally e2fsck
would be run automatically before the file system is mounted again,
thus avoiding this problem. However, a user using a rescue CD who
didn't run e2fsck before mounting the a file system in this condition
could trigger this situation, and unfortunately, with previous
versions of e2fsprogs and the kernel, there would be no way out no
matter what the user tried to do.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 732e26b98e added checks to
prevent e2fsck from being run in filesystem-modifying mode against
a mounted or otherwise busy device, due to several bug reports of
users doing this even with the verbose warnings in check_mount().
However, it also prevented e2fsck from checking a mounted root
filesystem, which will prevent the node from booting. Once again
allow e2fsck to run against the mounted root filesystem if it is
also mounted read-only at the time.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change the e2fsck/mke2fs/tune2fs/e2image/debugfs regression tests to
be driven by Makefile rules instead of by a script loop. This allows
the tests to be run in parallel like a build and reduces testing time
significantly.
One major change to the tests themselves is to printing the test name,
description, and status together after the test has passed or failed,
to avoid mixing lines from the tests. The other major change is to
use unique temporary filenames for each test, which was mostly handled
already via b4db1e4c74, but in some
cases temporary files are changed to use $test_name.tmp to avoid any
collision between running tests.
On my old 2-CPU system it reduced the testing time from 160s to 40s.
Much of the savings is from the MMP test delays running in parallel.
It still takes the time of the slowest test, f_mmp_garbage, though
there will be ongoing benefit in the future as more tests are added
since the wallclock time will not increase linearly for each test.
Tests were run with various combinations of "make -j", and "make -j2"
through "make -j44" repeatedly without any test failures.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The creation of inline wrappers ext2fs_open_file() and ext2fs_stat()
in commit c859cb1de0 in ext2fs.h caused
difficulties with the use of headers, since the headers for open64()
and stat64() may already be included (and skip the declaration of the
64-bit variants) before ext2fs.h is ever read. There is no real way
to solve the missing prototypes and resulting compiler warnings inside
ext2fs.h.
Since ext2fs_open_file() and ext2fs_stat() are not performance
critical operations, they do not need to be inline functions at all,
and the needed function headers can be handled properly in one file.
Similarly, posix_memalloc() was having difficulties with headers, and
was being defined in ext2fs.h, but it is now only being used by a
single file, so move the required header there.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The quotactl() system call was being used without the use of a
function prototype. On closer examination, it turns out the one user
of that system call was the quota_is_on() function, which is not used
by e2fsprogs at all. Since libquota is an e2fsprogs-internal library,
and not one that we plan to export any time soon, the simplest thing
to do is to simply remove quota_is_on(), which in turn allows us to
remove all of the infrastructure around using the Linux-specific
quotactl() system call.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently, if e2fsck is run without the "-n" flag (i.e. it
might modify the filesystem), there is no guarantee that it will
open the filesystem with the EXCLUSIVE flag (i.e. O_EXCL) to
prevent the block device from being checked (in most cases this
means mounted, but it could also be an MD/LVM member device).
Conversely, if e2fsck is run with "-n" (i.e. read-only), and
/etc/mtab or /proc/mounts does not report the block device as
mounted then e2fsck thinks the filesystem is unmounted. In this
case, e2fsck incorrectly sets the EXCLUSIVE flag, which causes
the check to fail, even though e2fsck is running read-only.
To fix this, do not open with EXCLUSIVE if it is a read-only check,
and always open with EXCLUSIVE if the filesystem might be changed.
This also prevents filesystem mounts while e2fsck is running.
Also refuse allow e2fsck to run at all if the filesystem is BUSY.
The e2fsck check_mount() was checking for MOUNTED, but not BUSY,
and it should refuse to run outright if the block device is BUSY.
The previous MOUNTED heuristics pre-date the O_EXCL reservation
by the kernel, so there could be uncertainty due to stale /etc/mtab
data, but with newer kernels a busy device should never be modified.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This code uses time() but doesn't include time.h leading to:
quotaio.c:89:2: warning: implicit declaration of function 'time'
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>