Add the ability to log messages about a file system to a specified
directory, using a file name templace that can be specified in
/etc/e2fsck.conf. This allows us to suppress the output of overly
verbose e2fsck outputs while still allowing the full logging output to
go to an appropriate file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
testing fs for NULL in expand_percent_expression():
e2fsck_ctx = fs ? (e2fsck_t) fs->priv_data : NULL;
implies that fs could be NULL, but it's passed to print_pathname()
which defererences it without further testing.
So make this safe by returning "???" for a nul fs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The name_len field in ext2_dir_entry is actually comprised of
the name length in the lower 8 bytes, and the filetype in the
high 8 bytes. So in places, we mask name_len with 0xFF to
get the actual length.
But once we have masked name_len with 0xFF, there is no point
in testing whether it is greater than EXT2_NAME_LEN, which
is 255 - or 0xFF. So all of these tests are extraneous.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for detecting the new 'quota' feature in ext4.
The patch reserves code points for usr and group quota inodes and also
for the feature flag EXT4_FEATURE_RO_COMPAT_QUOTA.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
E2fsck was not properly printing the i_blocks field in filesystem
corruption messages, and it was not properly checking i_blocks_hi and
i_blocks_lo, either. This commit fixes this.
Thanks to Felipe Conteras for pointing this out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Non-expert users get confused when they see messages like this:
Illegal block #-1 (2291965952) in inode 176. CLEARED.
So change it to be something a little bit more understandable:
Illegal indirect block (2291965952) in inode 176. CLEARED.
Addresses-SourceForge-Bug: #2871782
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixed a bug where e2fsck would report that last mount time was in the
future when it was really the last write time that was in the future.
Also, since people can't seem to believe that (a) their distribution
has buggy init scripts, or (b) their CMOS/RTC clock or backup battery
is dead, print the incorrect time and the current system time.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously e2fsprogs interpreted 0 for a rec_len of 65536 (which could
occur if the directory block is completely empty in 64k blocksize
filesystems), while the kernel interpreted 65535 to mean 65536. The
kernel will accept both to mean 65536, and encodes 65535 to be 65536.
This commit changes e2fsprogs to match.
We add the encoding agreed upon for 128k and 256k filesystems, but we
don't enable support for these larger block sizes, since they haven't
been fully tested.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some recent changes had caused diet libc support to bitrot. Fix up
missing header files and other portability fixups needed for dietlibc.
(Many of these changes also improve general portability.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Turkish translation has a bug in it where it has the translation
of "E@e '%Dn' in %p (%i)" to "E@E". This causes @E to be expanded at
@E, recursively, forever, until the stack fills up e2fsck core dumps.
Fix it by stopping after a recursive depth of 10, which is far more
than we need.
Addresses-Sourceforge-Bug: 1646081
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mke2fs is supposed to set the uid/gid ownership of the root directory when
a non-rooot user creates the filesystem. This wasn't working correctly
if the uid/gid was > 16 bits. In additional, debugfs wasn't displaying
large uid/gid's correctly. This patch fixes these two programs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the format string(%d, %ld) for a block number and inode number
to %u or %lu.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
easier to understand (sorry, translators).
Add new @m (multiply-claimed) and @n (invalid) expansions for e2fsck
problem descriptions.
Add Dutch translation, and update French translation.
Add an explanation of how the @-expansion and %-exapansion works in
e2fsck/problem.c to make life easier for the translators.
Synchronize and update po files.
stored in inodes into e2fsck.
There are a number of bug fixes and enhancements over the original lustre fsck
BK repository. The biggest one is that this extended attribute values must
be aligned on 4-byte boundaries.
super.c: Minor whitespace cleanups, from Andreas Dilger.
mtrace.h:
mtrace.h: Minor whitespace cleanups, from Andreas Dilger.
ChangeLog, message.c:
message.c (special_inode_name): Add more special inode names (From
Andreas Dilger)
pass1b.c: Change routines to use PR_1B_BLOCK_ITERATE when reporting
problems rather than using com_err directly.
problem.c, problem.h (PR_1B_BLOCK_ITERATE): Add new problem code.
message.c (expand_percent_expression): Add safety check. If ctx->str
is NULL, print "NULL" instead of dereferencing the null pointer.
pass1b.c, pass2.c, pass3.c: Change calls to ext2fs_block_iterate to
ext2fs_block_iterate2, to support 64-bit filesizes and to speed things
up slightly by avoiding the use of the ext2fs_block_iterate's
compatibility shim layer.
version.h:
Update for WIP release.
journal.c (e2fsck_journal_load): Fix **nasty** bug which caused
e2fsck_check_ext3_journal to smash the journal because
journal->j_transaction_sequence wasn't getting initialized.
journal.c: (recover_ext3_journal, e2fsck_run_ext3_journal): Move call
to e2fsck_clear_recover from recover_ext3_journal to after the
filesystem has been closed and reopened. Otherwise, the superblock in
the filesystem handle will probably be stale, and will overwrite the
newer version of the superblock written by the log recovery.
message.c (expand_inode_expression): Add support for %Iu and %Ig
problem.h (PR_0_CLEAR_ORPHAN_INODE): Add new problem code.
super.c (release_orphan_inodes, release_inode_block,
release_inode_blocks): Update the block group descriptor counts when
freeing the orphan inode. Use PR_0_CLEAR_ORPHAN_INODE to report when
we clear an orphan.
journal.c (e2fsck_run_ext3_journal): Fix a bug where we attempted to
reopen the filesystem using the device name instead of the filesystem
name.
Makefile.in: Update the make dependencies
problem.c, problem.h: Add the problem codes:
PR_0_ORPHAN_ILLEGAL_BLOCK_NUM, PR_0_ORPHAN_ALREADY_CLEARED_BLOCK,
PR_0_ORPHAN_ILLEGAL_HEAD_INODE, PR_0_ORPHAN_ILLEGAL_INODE,
PR_0_ORPHAN_INODE_INUSE
super.c (release_inode_blocks, release_orphan_inodes,
check_super_block): Add support for clearing orphaned inodes from the
unmounted filesystem.
journal.c (e2fsck_recover_ext3_journal): Remove the last orphan check;
this is now handled in check_super_block --- non-journaled filesystems
can use the orphan list in the future. Also, move the the re-opening
of the filesystem to e2fsck_run_ext3_journal().
debugfs.c:
debugfs.c (finish_range): Make sure the pager FILE pointer to use.
configure, configure.in, ChangeLog:
configure.in (JFS_DEBUG): Add support for --enable-jfs-debug
journal.c: implement loading of ext3 journal for recovery code
problem.c (fix_problem): return answer from PR_AFTER_CODE to caller.
Add journal problems.
recovery.c (journal_recover): user-space ext3 journal recovery code
unix.c (main) : check journal and do recovery in separate steps
jfs.h, recovery.c: Files ext3 kernel code.
jfs_compat.h: Compatibility header file to allow kernel code to be
linked to e2fsck.
unix.c (main): If compression is enabled on the filesystem, print a
warning message (for now).
message.c: Add new compression shortcut: @c == compress
problem.c, problem.h (PR_1_COMPR_SET): Add new error code.
pass1.c (check_blocks): If the inode has EXT2_COMPRBLK_FL flag set,
check to see if the filesystem supports compression. If it does pass
this information down to process_block() so it can treat the
compressed block flag words correctly. If not, offer to clear the
flag, since it shouldn't be set.
(process_block): If an inode has the compressed inode flag set, allow
EXT2FS_COMPRESSED_BLKADDR.
pass1b.c (process_pass1b_block, delete_file_block, clone_file_block):
pass2.c (deallocate_inode_block): Use HOLE_BLKADDR to check to see if
the block can be skipped.
ChangeLog, Makefile.in:
Makefile.in: Exclude the internationalization files from being
distributed.
ChangeLog, configure, configure.in:
configure.in: Add support for --enable-compression. This is
experimental code only for now, which is why it's under --enable test.
Once it's stable, it will always be compiled in.
TODO:
Commit additional TODO items.