Map the stack executable if required by default or on demand.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new property "big-endian" to allow configuring the RTC as either
little or big endian, the default is little endian.
Currently overriding the default to big endian is only used by the m68k
virt platform. New platforms should prefer to use little endian and not
set this.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
These will be shared with the virt platform.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Version: GnuPG v1
iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
=eMUT
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
# KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
# Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
# JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
# ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
# wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
# =eMUT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Sep 2022 02:30:35 EDT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [full]
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu: (21 commits)
net: tulip: Restrict DMA engine to memories
net/colo.c: Fix the pointer issue reported by Coverity.
vdpa: Delete CVQ migration blocker
vdpa: Add virtio-net mac address via CVQ at start
vhost_net: add NetClientState->load() callback
vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail
vdpa: Move command buffers map to start of net device
vdpa: add net_vhost_vdpa_cvq_info NetClientInfo
vhost_net: Add NetClientInfo stop callback
vhost_net: Add NetClientInfo start callback
vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush
vhost: Delete useless read memory barrier
vhost: use SVQ element ndescs instead of opaque data for desc validation
vhost: stop transfer elem ownership in vhost_handle_guest_kick
vdpa: Use ring hwaddr at vhost_vdpa_svq_unmap_ring
vhost: Always store new kick fd on vhost_svq_set_svq_kick_fd
vdpa: Make SVQ vring unmapping return void
vdpa: Remove SVQ vring from iova_tree at shutdown
util: accept iova_tree_remove_parameter by value
vdpa: do not save failed dma maps in SVQ iova tree
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Support for the unix socket has existed both in BSD and Linux for the
longest time, but not on Windows. Since Windows 10 build 17063 [1],
the native support for the unix socket has come to Windows. Starting
this build, two Win32 processes can use the AF_UNIX address family
over Winsock API to communicate with each other.
[1] https://devblogs.microsoft.com/commandline/af_unix-comes-to-windows/
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220802075200.907360-3-bmeng.cn@gmail.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It allows per-net client operations right after device's successful
start. In particular, to load the device status.
Vhost-vdpa net will use it to add the CVQ buffers to restore the device
status.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Used by the backend to perform actions after the device is stopped.
In particular, vdpa net use it to unmap CVQ buffers to the device,
cleaning the actions performed in prepare().
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is used by the backend to perform actions before the device is
started.
In particular, vdpa net use it to map CVQ buffers to the device, so it
can send control commands using them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
=0uL/
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-08-31:
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
# ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
# YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
# =0uL/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Aug 2022 16:09:58 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu: (60 commits)
ppc4xx: Fix code style problems reported by checkpatch
ppc/ppc4xx: Fix sdram trace events
hw/ppc/Kconfig: Move imply before select
hw/ppc/sam460ex: Remove PPC405 dependency from sam460ex
ppc405: Move machine specific code to ppc405_boards.c
ppc/ppc405: QOM'ify FPGA
ppc/ppc405: Use an explicit I2C object
hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device
ppc/ppc405: Use an embedded PPCUIC model in SoC state
ppc4xx: Rename ppc405-ebc to ppc4xx-ebc
ppc4xx: Move EBC model to ppc4xx_devs.c
ppc4xx: Rename ppc405-plb to ppc4xx-plb
ppc4xx: Move PLB model to ppc4xx_devs.c
ppc/ppc405: QOM'ify MAL
ppc/ppc405: QOM'ify PLB
ppc/ppc405: QOM'ify POB
ppc/ppc405: QOM'ify OPBA
ppc/ppc405: QOM'ify EBC
ppc/ppc405: QOM'ify DMA
ppc/ppc405: QOM'ify GPIO
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a SCSI command is received from the guest, the CDB length implied
by the first byte might exceed the number of bytes the guest sent. In
this case scsi_req_new() will read uninitialized data, causing
unpredictable behavior.
Adds the buf_len parameter to scsi_req_new() and plumbs it through the
call stack.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-1-john@john-millikin.com>
[Fill in correct length for adapters other than ESP. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make ppc-uic a subclass of ppc4xx-dcr-device which will handle the cpu
link and make it uniform with the other PPC4xx devices.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <eb548130cf60aea8a6ea4dba4dee1686b3cabc3d.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is shared between different 4xx socs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <63d9b14c8ff5f73e35bffca1036394b5235735ee.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The EBC is shared between 405 and 440 so move it to shared file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <10eae70509ca4bd74858fc2c0a0f0e4eb9330199.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is shared between different 4xx socs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <5b13ebfd12a71a28035bed5a915cbeee81cf21d1.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PLB is shared between 405 and 440 so move it to the shared file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2498384bf3e18959ee8cb984d72fb66b8a6ecadc.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Memory Access Layer (MAL) controller is currently modeled as a DCR
device with 4 IRQs. Also drop the ppc4xx_mal_init() helper and adapt
the sam460ex machine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes, add finalize method]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <d54a243dff94d95ba30dbcc09c27700a90ade932.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Device Control Registers (DCR) of on-SoC devices are accessed by
software through the use of the mtdcr and mfdcr instructions. These
are converted in transactions on a side band bus, the DCR bus, which
connects the on-SoC devices to the CPU.
Ideally, we should model these accesses with a DCR namespace and DCR
memory regions but today the DCR handlers are installed in a DCR table
under the CPU. Instead, introduce a little device model wrapper to hold
a CPU link and handle registration of DCR handlers.
The DCR device inherits from SysBus because most of these devices also
have MMIO regions and/or IRQs. Being a SysBusDevice makes things easier
to install the device model in the overall SoC.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Explicit opaque parameter for dcr callbacks]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9b21bdf55e0a728f093bad299e030d98f302ded0.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Drop the use of ppc4xx_init() and duplicate a bit of code related to
clocks in the SoC realize routine. We will clean that up in the
following patches.
ppc_dcr_init() simply allocates default DCR handlers for the CPU. Maybe
this could be done in model initializer of the CPU families needing it.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-8-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When enabling user created PHBs (a change reverted by commit 9c10d86fee)
we were handling PHBs created by default versus by the user in different
manners. The only difference between these PHBs is that one will have a
valid phb3->chip that is assigned during pnv_chip_power8_realize(),
while the user created needs to search which chip it belongs to.
Aside from that there shouldn't be any difference. Making the default
PHBs behave in line with the user created ones will make it easier to
re-introduce them later on. It will also make the code easier to follow
since we are dealing with them in equal manner.
The first step is to turn chip8->phbs[] into a PnvPHB3 pointer array.
This will allow us to assign user created PHBs into it later on. The way
we initilize the default case is now more in line with that would happen
with the user created case: the object is created, parented by the chip
because pnv_xscom_dt() relies on it, and then assigned to the array.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-6-danielhb413@gmail.com>
pnv_parent_qom_fixup() and pnv_parent_bus_fixup() are versions of the
helpers that were reverted by commit 9c10d86fee "ppc/pnv: Remove
user-created PHB{3,4,5} devices". They are needed to amend the QOM and
bus hierarchies of user created pnv-phbs, matching them with default
pnv-phbs.
A new helper pnv_phb_user_device_init() is created to handle
user-created devices setup. We're going to call it inside
pnv_phb_realize() in case we're realizing an user created device. This
will centralize all user device realated in a single spot, leaving the
realize functions of the phb3/phb4 backends untouched.
Another helper called pnv_chip_add_phb() was added to handle the
particularities of each chip version when adding a new PHB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-5-danielhb413@gmail.com>
The same rationale provided in the PHB3 bus case applies here.
Note: we could have merged both buses in a single object, like we did
with the root ports, and spare some boilerplate. The reason we opted to
preserve both buses objects is twofold:
- there's not user side advantage in doing so. Unifying the root ports
presents a clear user QOL change when we enable user created devices back.
The buses objects, aside from having a different QOM name, is transparent
to the user;
- we leave a door opened in case we want to increase the root port limit
for phb4/5 later on without having to deal with phb3 code.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-3-danielhb413@gmail.com>
We rely on the phb-id and chip-id, which are PHB properties, to assign
chassis and slot to the root port. For default devices this is no big
deal: the root port is being created under pnv_phb_realize() and the
values are being passed on via the 'index' and 'chip-id' of the
pnv_phb_attach_root_port() helper.
If we want to implement user created root ports we have a problem. The
user created root port will not be aware of which PHB it belongs to,
unless we're willing to violate QOM best practices and access the PHB
via dev->parent_bus->parent. What we can do is to access the root bus
parent bus.
Since we're already assigning the root port as QOM child of the bus, and
the bus is initiated using PHB properties, let's add phb-id and chip-id
as properties of the bus. This will allow us trivial access to them, for
both user-created and default root ports, without doing anything too
shady with QOM.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-2-danielhb413@gmail.com>
The helper is only used in this file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-13-danielhb413@gmail.com>
The attribute is unused.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-11-danielhb413@gmail.com>
We support only a single root port, PNV_PHB_ROOT_PORT.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-10-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used instead. The phb4-root-port
device isn't exposed to the user in any official QEMU release so there's
no ABI breakage in removing it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-9-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used in its place. There is no ABI
breakage in doing so because no official QEMU release introduced user
creatable pnv-phb3-root-port devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-8-danielhb413@gmail.com>
Change the parent type of the PnvPHB4 device to TYPE_PARENT since the
PCI bus is going to be initialized by the PnvPHB parent. Functions that
needs to access the bus via a PnvPHB4 object can do so via the
phb4->phb_base pointer.
pnv_phb4_pec now creates a PnvPHB object.
The powernv9 machine class will create PnvPHB devices with version '4'.
powernv10 will create using version '5'. Both are using global machine
properties in their class_init() to do that.
These changes will benefit us when adding PnvPHB user creatable devices
for powernv9 and powernv10.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-6-danielhb413@gmail.com>
Similar to what we already did for the PnvPHB3 device, let's add a
helper to init the bus when using a PnvPHB4. This helper will be used by
PnvPHb when PnvPHB4 turns into a backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-5-danielhb413@gmail.com>
We need a handful of changes that needs to be done in a single swoop to
turn PnvPHB3 into a PnvPHB backend.
In the PnvPHB3, since the PnvPHB device implements PCIExpressHost and
will hold the PCI bus, change PnvPHB3 parent to TYPE_DEVICE. There are a
couple of instances in pnv_phb3.c that needs to access the PCI bus, so a
phb_base pointer is added to allow access to the parent PnvPHB. The
PnvPHB3 root port will now be connected to a PnvPHB object.
In pnv.c, the powernv8 machine chip8 will now hold an array of PnvPHB
objects. pnv_get_phb3_child() needs to be adapted to return the PnvPHB3
backend from the PnvPHB child. A global property is added in
pnv_machine_power8_class_init() to ensure that all PnvPHBs are created
with phb->version = 3.
After all these changes we're still able to boot a powernv8 machine with
default settings. The real gain will come with user created PnvPHB
devices, coming up next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-4-danielhb413@gmail.com>
The PnvPHB3 bus init consists of initializing the pci_io and pci_mmio
regions, registering it via pci_register_root_bus() and then setup the
iommu.
We'll want to init the bus from outside pnv_phb3.c when the bus is
removed from the PnvPHB3 device and put into a new parent PnvPHB device.
The new pnv_phb3_bus_init() helper will be used by the parent to init
the bus when using the PHB3 backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-2-danielhb413@gmail.com>
Added the possibility of recalculating a result if it overflows or
underflows, if the result overflow and the rebias bool is true then the
intermediate result should have 3/4 of the total range subtracted from
the exponent. The same for underflow but it should be added to the
exponent of the intermediate number instead.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220805141522.412864-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The SBE (Self Boot Engine) are on-chip microcontrollers that perform
early boot steps, as well as provide some runtime facilities (e.g.,
timer, secure register access, MPIPL). The latter facilities are
accessed mostly via a message system called SBEFIFO.
This driver provides initial emulation for the SBE runtime registers
and a very basic SBEFIFO implementation that provides the timer
command. This covers the basic SBE behaviour expected by skiboot when
booting.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220811093726.1442343-1-npiggin@gmail.com>
[danielhb: fixed SBE_HOST_RESPONSE_MASK long line]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The last user of this function has just been removed, so we can
drop this function now, too.
Message-Id: <20220810125720.3849835-4-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
aarch64 stores MTE tags in target_date, and they should be reset by
MADV_DONTNEED.
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220711220028.2467290-1-vitalybuka@google.com>
[lv: fix code style issues]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We currently require at least GCC 7.4 or Clang 6.0 for compiling QEMU.
GCC has __builtin_mul_overflow since version 5 already, and Clang 6.0
also provides this built-in function (see its documentation on this page:
https://releases.llvm.org/6.0.0/tools/clang/docs/LanguageExtensions.html ).
So we can simplify the #if statement here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220721074809.1513357-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If we go directly to GLOBAL_STATE_CODE, IO_CODE or IO_OR_GS_CODE
definition, we just find that they "mark and check that the function
is part of the {category} API".
However, ther is no definition on what {category} API is, they are
in include/block/block-*.h
Therefore, add a comment that refers to such documentation.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220609122206.1016936-1-eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Change macro name 'LS7A_XXX' to 'VIRT_XXX', as the loongarch
virt machinue use the GPEX bridge instead of LS7A bridge. So
the macro name should keep consistency.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220729073018.27037-3-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently QEMU exits with code 0 on both panic an shutdown. For tests
it is useful to return 1 on panic, so that it counts as a test
failure.
Introduce a new exit-failure PanicAction that makes main() return
EXIT_FAILURE. Tests can use -action panic=exit-failure option to
activate this behavior.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220725223746.227063-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The added enforcing is only relevant in the case of AMD where the
range right before the 1TB is restricted and cannot be DMA mapped
by the kernel consequently leading to IOMMU INVALID_DEVICE_REQUEST
or possibly other kinds of IOMMU events in the AMD IOMMU.
Although, there's a case where it may make sense to disable the
IOVA relocation/validation when migrating from a
non-amd-1tb-aware qemu to one that supports it.
Relocating RAM regions to after the 1Tb hole has consequences for
guest ABI because we are changing the memory mapping, so make
sure that only new machine enforce but not older ones.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-12-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the pre-initialized pci-host qdev and fetch the
pci-hole64-size into pc_memory_init() newly added argument.
Use PCI_HOST_PROP_PCI_HOLE64_SIZE pci-host property for
fetching pci-hole64-size.
This is in preparation to determine that host-phys-bits are
enough and for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-4-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the start of pc_memory_init() we usually pass a range of
0..UINT64_MAX as pci_memory, when really its 2G (i440fx) or
32G (q35). To get the real user value, we need to get pci-host
passed property for default pci_hole64_size. Thus to get that,
create the qdev prior to memory init to better make estimations
on max used/phys addr.
This is in preparation to determine that host-phys-bits are
enough and also for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-3-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than hardcoding the 4G boundary everywhere, introduce a
X86MachineState field @above_4g_mem_start and use it
accordingly.
This is in preparation for relocating ram-above-4g to be
dynamically start at 1T on AMD platforms.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-2-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Richard Henderson