Since commit 12b6e9b27d ("disas: Clean up CPUDebug initialization")
the disassemble_info->bfd_endian enum is set for all targets in
target_disas(). We can directly call print_insn_nios2() and simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210807110939.95853-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The position of this read-only field is dependent on the current xlen.
Rather than having to compute that difference in many places, compute
it only on read.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-16-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the official debug read interface to the csrs,
rather than referencing the env slots directly.
Put the list of csrs to dump into a table.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-15-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Most shift instructions require a separate implementation
for RV32 when TARGET_LONG_BITS == 64.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-14-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The count zeros instructions require a separate implementation
for RV32 when TARGET_LONG_BITS == 64.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When target_long is 64-bit, we still want a 32-bit bswap for rev8.
Since this opcode is specific to RV32, we need not conditionalize.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-12-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The multiply high-part instructions require a separate
implementation for RV32 when TARGET_LONG_BITS == 64.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In preparation for RV128, consider more than just "w" for
operand size modification. This will be used for the "d"
insns from RV128 as well.
Rename oper_len to get_olen to better match get_xlen.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In preparation for RV128, replace a simple predicate
with a more versatile test.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-9-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're currently assuming SEW <= 3, and the "else" from
the SEW == 3 must be less. Use a switch and explicitly
bound both SEW and SEQ for all cases.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-8-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the same REQUIRE_64BIT check that we use elsewhere,
rather than open-coding the use of is_32bit.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-7-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Begin adding support for switching XLEN at runtime. Extract the
effective XLEN from MISA and MSTATUS and store for use during translation.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-6-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Shortly, the set of supported XL will not be just 32 and 64,
and representing that properly using the enumeration will be
imperative.
Two places, booting and gdb, intentionally use misa_mxl_max
to emphasize the use of the reset value of misa.mxl, and not
the current cpu state.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hw representation of misa.mxl is at the high bits of the
misa csr. Representing this in the same way inside QEMU
results in overly complex code trying to check that field.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-4-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the MXL_RV* defines to enumerators.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-3-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the function to cpu_helper.c, as it is large and growing.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-2-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Organise the CPU properties so that standard extensions come first
then followed by experimental extensions.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: b6598570f60c5ee7f402be56d837bb44b289cc4d.1634531504.git.alistair.francis@wdc.com
Since commit 1a9540d1f1
("target/riscv: Drop support for ISA spec version 1.09.1")
these definitions are unused, remove them.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: f4d8a7a035f39c0a35d44c1e371c5c99cc2fa15a.1634531504.git.alistair.francis@wdc.com
TB_FLAGS mem_idx bits was extended from 2 bits to 3 bits in
commit: c445593, but other TB_FLAGS bits for rvv and rvh were
not shift as well so these bits may overlap with each other when
rvv is enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211015074627.3957162-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The earlier implementation fell into a corner case for bytes that were
0x01, giving a wrong result (but not affecting our application test
cases for strings, as an ASCII value 0x01 is rare in those...).
This changes the algorithm to:
1. Mask out the high-bit of each bytes (so that each byte is <= 127).
2. Add 127 to each byte (i.e. if the low 7 bits are not 0, this will overflow
into the highest bit of each byte).
3. Bitwise-or the original value back in (to cover those cases where the
source byte was exactly 128) to saturate the high-bit.
4. Shift-and-mask (implemented as a mask-and-shift) to extract the MSB of
each byte into its LSB.
5. Multiply with 0xff to fan out the LSB to all bits of each byte.
Fixes: d7a4fcb034 ("target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci")
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reported-by: Vincent Palatin <vpalatin@rivosinc.com>
Tested-by: Vincent Palatin <vpalatin@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211013184125.2010897-1-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Ensure the columns for all of the register names and values line up.
No functional change, just a minor tweak to the output.
Signed-off-by: Travis Geiselbrecht <travisg@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211009055019.545153-1-travisg@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
oprsz and maxsz are passed with the same value in commit: eee2d61e20.
However, vmv.v.v was missed in that commit and should pass the same
value as well in its tcg_gen_gvec_2_ptr() call.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211007081803.1705656-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Problem state needs to be able to read and write the PMU counters,
otherwise it won't be aware of any sampling result that the PMU produces
after a Perf run.
This patch does that in a similar fashion as already done in the
previous patches. PMCs 5 and 6 have a special condition, aside from the
constraints that are common with PMCs 1-4, where they are not part of the
PMU if MMCR0_PMCC is 0b11.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-5-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Similar to the previous patch, let's add problem state read/write access to
the MMCR2 SPR, which is also a group A PMU SPR that needs to be filtered
to be read/written by userspace.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Userspace need access to PMU SPRs to be able to operate the PMU. One of
such SPRs is MMCR0.
MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU
register. This class of registers has common read/write rules that are
governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem
state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are
readable/writable in this case.
This patch exposes MMCR0 to userspace by doing the following:
- two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(),
are added to be used as problem state read/write callbacks of UMMCR0.
Both callbacks filters the amount of bits userspace is able to
read/write by using a MMCR0_UREG_MASK;
- problem state access control is done by the spr_groupA_read_allowed()
and spr_groupA_write_allowed() helpers. These helpers will read the
current PMCC bits from DisasContext and check whether the read/write
MMCR0 operation is valid or noti;
- to avoid putting exclusive PMU logic into the already loaded
translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that
will hold all the spr_read/spr_write functions of PMU registers.
The 'power8' name of this new file intends to hint about the proven
support of the PMU logic to be added. The code has been tested with the
IBM POWER chip family, POWER8 being the oldest version tested. This
doesn't mean that the PMU logic will break with any other PPC64 chip
that implements Book3s, but rather that we can't assert that it works
properly with any Book3s compliant chip.
CC: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're going to add PMU support for TCG PPC64 chips, based on IBM POWER8+
emulation and following PowerISA v3.1. This requires several PMU related
registers to be exposed to userspace (problem state). PowerISA v3.1
dictates that the PMCC bits of the MMCR0 register controls the level of
access of the PMU registers to problem state.
This patch start things off by exposing both PMCC bits to hflags,
allowing us to access them via DisasContext in the read/write callbacks
that we're going to add next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PowerISA says that mtmsr[d] "does not alter MSR[HV], MSR[S], MSR[ME], or
MSR[LE]", but the current code only filters the GPR-provided value if
L=1. This behavior caused some problems in FreeBSD, and a build option
was added to work around the issue [1], but it seems that the bug was
not reported in launchpad/gitlab. This patch address the issue in qemu,
so the option on FreeBSD should no longer be required.
[1] https://cgit.freebsd.org/src/commit/?id=4efb1ca7d2a44cfb33d7f9e18bd92f8d68dcfee0
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211015181940.197982-1-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can't read env->xer directly, as it does not contain some bits of
XER. Instead, we should have a callback that uses cpu_read_xer to read
the complete register.
Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-5-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
env->xer doesn't hold some bits of XER, like OV and CA. To write the
complete register in the core dump we should read XER value with
cpu_read_xer.
Reported-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-4-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The value of XER is split in multiple fields of CPUPPCState, like
env->xer and env->so. To get/set the whole register from gdb, we should
use cpu_read_xer/cpu_write_xer.
Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-3-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mask of the Byte-Reverse Halfword opcode is a read-only
constant. We can avoid using a TCG temporary by moving the
mask to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003141711.3673181-3-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Avoid using TCG temporaries for the -1 and 8 constant values.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003141711.3673181-2-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since gen_mipsdsp_accinsn() got added in commit b53371ed5d
("target-mips: Add ASE DSP accumulator instructions"), the
'v2_t' TCG temporary has never been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211014224551.2204949-1-f4bug@amsat.org>
While for the DEXTR_S.H opcode:
"The shift argument is provided in the instruction."
For the DEXTRV_S.H opcode we have:
"The five least-significant bits of register rs provide the
shift argument, interpreted as a five-bit unsigned integer;
the remaining bits in rs are ignored."
While 't1' contains the 'rs' register content (the shift value
for DEXTR_S.H), we need to load the value of 'rs' for DEXTRV_S.H.
We can directly use the v1_t TCG register which already contains
this shift value.
Fixes: b53371ed5d ("target-mips: Add ASE DSP accumulator instructions")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211013215652.1764551-1-f4bug@amsat.org>
The offset is constant and read-only: move it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-9-f4bug@amsat.org>
We already use sextract32(), use extract32() for completeness
instead of open-coding it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-7-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-6-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-5-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-4-f4bug@amsat.org>
Data Format is a 2-bit constant value.
Avoid using a TCG temporary by moving it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-3-f4bug@amsat.org>
Commits cbe50b9a8e ("target-mips: add MSA VEC/2R format instructions")
and 3bdeb68866 ("target-mips: add MSA 2RF format instructions") added
the MSA 2R/2RF instructions. However these instructions don't use any
target vector register, so remove the unused TCG temporaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003175743.3738710-2-f4bug@amsat.org>
Per the "MIPS Architecture Extension: nanoMIPS32 DSP TRM" rev 0.04,
MULT and MULTU opcodes:
The value of ac selects an accumulator numbered from 0 to 3.
When ac=0, this refers to the original HI/LO register pair of the
MIPS32 architecture.
In Release 6 of the MIPS Architecture, accumulators are eliminated
from MIPS32.
Ensure pre-Release 6 is restricted to HI/LO registers pair.
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS - part 4")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically, which means
we don't need to do anything in the wrappers.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already set DISAS_NORETURN in generate_exception,
which makes the exit_tb unreachable.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson