Add the mke2fs.conf configuration option which causes the hugefiles to
be aligned to the beginning of the disk. This is important if the the
reason for aligning the hugefiles is to support hard-drive specific
features such as Shingled Magnetic Recording (SMR).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After a journal replay, we close and reopen the file system so that
any changes in the superblock can get reflected in the libext2fs's
internal data structures. We need to save the flags passed to
ext2fs_open() that we used when we originally opened the file system.
Otherwise we will end up not be able to repair a file system which
requires a journal replay and which has bigalloc enabled or which has
more than 2**32 blocks; e2fsck will abort with the error message:
fsck.ext4: Filesystem too large to use legacy bitmaps while trying to re-open
Addresses-Debian-Bug: 744953
Cc: Андрей Василишин <a.vasilishin@kpi.ua>
Cc: Jon Severinsson <jon@severinsson.net>
Cc: 744953@bugs.debian.org
In mke2fs command, if flex_bg count is too large to filesystem blocks
count, unmountable ext4 which has the out of filesystem block offset
is created (Case1). Moreover this large flex_bg count causes an
unintentional metadata layout (bmap-imap-itable-bmap-imap-itable .. in
block group) (Case2).
To fix these issues and keep healthy flex_bg layout, disallow creating
ext4 with obviously large flex_bg count to filesystem blocks count.
Steps to reproduce:
(Case1)
1.
# mke2fs -t ext4 -b 4096 -O ^resize_inode -G $((2**20)) DEV 2130483
2.
# mount -t ext4 DEV MP
mount: wrong fs type, bad option, bad superblock on /dev/sdb4,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
3.
# dumpe2fs DEV
...
Block count: 2130483
...
Flex block group size: 1048576
...
Group 65: (Blocks 2129920-2130482) [INODE_UNINIT]
Checksum 0x4cb3, unused inodes 8080
Block bitmap at 67 (bg #0 + 67), Inode bitmap at 1048643 (bg #32 + 67)
Inode table at 2129979-2130483 (+59)
^^^^^^^ 2130483 is out of FS!
65535 free blocks, 8080 free inodes, 0 directories, 8080 unused inodes
Free blocks:
Free inodes: 525201-533280
(Case2)
1.
# mke2fs -t ext4 -G 2147483648 DEV 3145728
2.
# debugfs -R stats DEV
...
Block count: 786432
...
Flex block group size: 2147483648
...
Group 0: block bitmap at 193, inode bitmap at 194, inode table at 195
...
Group 1: block bitmap at 707, inode bitmap at 708, inode table at 709
...
Group 2: block bitmap at 1221, inode bitmap at 1222, inode table at 1223
...
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
We can set flex_bg count only up to 2^30 with profile
because get_int_from_profile can handle it to 2^31-1.
Add get_uint_from_profile to read unsigned int value
so that mke2fs with profile can handle up to 2^31 flex_bg same as -G option.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mke2fs -G option allows root user to set flex_bg count (power of 2).
However ext4 has bad metadata layout if we specify more than or equal to
2^32 to mke2fs -G, because of the 32bit shift operation
in ext2fs_allocate_group_table().
And the maximum block group count of ext4 is 2^32 -1 (ext4_group_t
s_groups_count), so diallow more than 2^32 flex_bg count.
Steps to reproduce:
# mke2fs -t ext4 -G 4294967296 DEV
# dumpe2fs DEV
...
Flex block group size: 1 <----- flex_bg is 1!
...
Group 0: (Blocks 0-32767)
Checksum 0x4afd, unused inodes 7541
Primary superblock at 0, Group descriptors at 1-1
Reserved GDT blocks at 2-59
Block bitmap at 60 (+60), Inode bitmap at 61 (+61)
Inode table at 62-533 (+62)
32228 free blocks, 7541 free inodes, 2 directories, 7541 unused inodes
Free blocks: 540-32767
Free inodes: 12-7552
Group 1: (Blocks 32768-65535) [INODE_UNINIT]
Checksum 0xc890, unused inodes 7552
Backup superblock at 32768, Group descriptors at 32769-32769
Reserved GDT blocks at 32770-32827
Block bitmap at 32828 (+60), Inode bitmap at 32829 (+61)
Inode table at 32830-33301 (+62)
32234 free blocks, 7552 free inodes, 0 directories, 7552 unused inodes
Free blocks: 33302-65535
Free inodes: 7553-15104
...
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <darrick.wong@oracle.com>
If a large flex_bg factor is specified and the block allocator was
laying out block or inode bitmaps or inode tables, and collides with
previously allocated metadata (for example the backup superblock or
group descriptors) it would reset the allocator back to the beginning
of the flex_bg instead of continuing past the obstruction.
For example, with "-G 131072" the inode table will hit the backup
descriptors in groups 1, 3, 5, 7, 9 and start interleaving with the
block and inode bitmaps. That results in poorly allocated bitmaps
and inode tables that are interleaved and not contiguous as was
intended for flex_bg:
Group 0: (Blocks 0-32767)
Primary superblock at 0, Group descriptors at 1-2048
Block bitmap 2049 (+2049), Inode bitmap at 133121 (bg #4+2049)
Inode table 264193-264200 (bg #8+2049)
:
:
Group 3838: (Blocks 125763584-125796351) [INODE_UNINIT, BLOCK_UNINIT]
Block bitmap 5887 (bg #0+5887), Inode bitmap 136959 (bg #4+5887)
Inode table 294897-294904 (bg #8 + 32753)
Group 3839: (Blocks 125796352-125829119) [INODE_UNINIT, BLOCK_UNINIT]
Block bitmap 5888 (bg #0+5888), Inode bitmap 136960 (bg #4+5888)
Inode table 5889-5896 (bg #0 + 5889)
Group 3840: (Blocks 125829120-125861887) [INODE_UNINIT, BLOCK_UNINIT]
Block bitmap 5897 (bg #0+5897), Inode bitmap 136961 (bg #4+5889)
Inode table 5898-5905 (bg #0 + 5898)
:
:
Instead, skip the intervening blocks if there aren't too many of them.
That mostly keeps the flex_bg allocations from colliding, though still
not perfect because there is still some overlap with the backups.
This patch addresses the majority of the problem, allowing about 124k
groups to be layed out perfectly, instead of less than 4k groups with
the previous code.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently is used did not specified lazy_itable_init option we rely on
information from ext4 module exported via sysfs interface. However if
the ext4 module is not loaded it will not be enabled even though kernel
might support it.
With this commit we set the default according to the kernel version,
however we still allow it to be set manually via extended option or be
enabled in case that ext4 module advertise that it supports this
feature.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Currently there are many uses of ext2fs_close() which might be wrong.
First of all ext2fs_close() does not set the ext2_filsys pointer to NULL
so the caller is responsible for clearing it, however there are some
cases there we do not do it.
Second of all very small number of users of ext2fs_close() actually
check the return value. If there is a problem in ext2fs_close() it will
not even free the ext2_filsys structure, but majority of users expect it
to do so.
To fix both problems this commit introduces a new helper
ext2fs_close_free() which will not only check for the return value and
free the ext2_filsys structure if the call to ext2fs_close2() failed,
but it will also set the ext2_filsys pointer to NULL.
Replace every use of ext2fs_close() in e2fsprogs tools with
ext2fs_close_free() - there is no real reason to keep using
ext2fs_close().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit 2500ebfc89 (util: fix make dependencies for subst) broke cross
compilation because it unconditionally used config.h without setting a
includes path so that the config.h file could be found.
The proposed fix of adding the include path (such as was proposed at
http://patchwork.ozlabs.org/patch/355662/ or in Debian Bug #753375)
isn't really the right way to go, since the information in config.h is
for the target environment, and not the build environment. So using
config.h when building helper programs used as part of the build can
potentially cause more problems than it solves.
In general, build helpers must be written to be as portable as
possible, and to not require any autoconf defined #ifdef's whenever
possible. The subst program broke this rule to (1) address a Coverity
security complaint by using futimes(2) instad of utimes(2) if present,
and (2) to preserve the nanosecond portion of the file timestamp.
Oh, well. We won't be able to do the latter when cross compiling, and
as to the former, if an attacker has write access to your build tree
while you are building programs that will be run as root, you've got
bigger problems. :-)
Fix the problem that commit 2500ebfc89 was trying to address by
explicitly adding @DEFS@ to CFLAGS, so that -DHAVE_CONFIG_H is passed
to make depend. This fixes up the make depend without forcing the use
of config.h when cross-compiling.
Addresses-Debian-Bug: #753375
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Helmut Grohne <helmut@subdivi.de>
Cc: 753375@bugs.debian.org
External libblkid needs -luuid when linking statically.
Also fix up the bogus other-lib parameter in the libuuid test;
$LIBUUID is the null string, so it doesn't do anything other than
obfuscate the use of AC_CHECK_LIB.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Try to avoid name clashes with definitions of __u8, __u16, __u32,
and __u64 in userspace, in case other headers also define these
types. Define HAVE___{S,U}{8,16,32,64} preprocessor macros to
show that these types are already defined.
This would avoid the need to check for _BLKID_TYPES_H in ext2_types.h
and _EXT2_TYPES_H in blkid_types.h, but since older versions of these
headers did not use HAVE___U8 et.al. keep these checks around for now.
Report an error if there are no 64-bit types available. The code
will not compile if these are not available.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The LIST_HEAD macro is not directly used in getsize.c, so
<sys/queue.h> is not needed at all, and could cause confusion at
some later point if the Linux-style list macros are ever used.
Build was verified on MacOS which defined HAVE_SYS_DISK_H true.
I manually inspected the sources for recent *BSD headers to check
if this was needed there or not. MacOS and FreeBSD <sys/disk.h>
do not use lists at all. NetBSD and OpenBSD <sys/disk.h> and all
of the <sys/mount.h> headers include <sys/queue.h> internally.
I used http://fxr.watson.org/fxr/source/sys/mount.h?v={OSTYPE}
as a reference, checking both old and new *BSD versions.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is a straight cut and paste from the util-linux
mount manpage to ext4.5 (with commented-out lines
removed).
It's pretty much impossible for util-linux to keep up
with every filesystem out there, and Karel has more than
once expressed a wish that mount options move into fs-specific
manpages.
So, here we go.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The chattr(1) manpage and chattr usage() output were missing some flags.
Add those, and make some other minor cosmetic fixes.
(I've left out the 'B' (EXT2_COMPRBLK_FL) flag, because
it's not actually used anywhere, and I can't figure out
how it differs from 'c' (EXT2_COMPR_FL))
Also, because the matrix of filesystems & flags is quite large,
refer to filesystem-specific manpages for detailed discussion
of flags supported by those filesystems, rather than trying to
cover it all in this manpage. I'll send those manpage
updates to the appropriate lists a bit later.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
The flags described in chattr usage() and the chattr(1) manpage
were in semi-random order, which makes it hard to ascertain
which flags might be missing or undocumented, and to locate
flags within the manpage.
Re-order the list of flags in alphanumeric order, and do
the same for the flag descriptions in the body of the manpage.
There should be no content changes here, just reordering
for consistency.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixing last mount time and last write time is safe - there's no risk of
loosing any important information or making corruption significantly
worse even if we get it wrong. So let's just fix these times in preen
mode. This allows initrd to automatically check and mount root
filesystem in case system clock is wrong without having to manually set
broken_system_clock variable (openSUSE uses broken_system_clock by default
to avoid these problems during boot but this disables time-based checks
even on systems where clock is fine so that's not ideal either).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It's a bit strange to accept revision levels higher than
the code creating the filesystem can understand, so don't
allow it.
At least the kernel will mount the fs readonly if it's too
high, but no other utility will touch it, so you can't
fix the error.
Just reject anything > EXT2_MAX_SUPP_REV at mkfs time.
Signed-off-by: Frank Sorenson <fsorenso@redhat.com>
[sandeen@redhat.com: Add more verbose commit log]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Per http://www.gnu.org/software/checker/ the gcc "-checker" option
is long deprecated. Nuke it from e2fsprogs.
Most people would never hit this, but people who love to turn knobs,
such as the reporter of kernel.org bz#74171, might run into it and be
sad.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Autoconf says that aclocal.m4 is a machine-generated copy of
system-wide macros, whereas acinclude.m4 is for project-specific
macros. Reflect this division and ease building by anyone who needs
to re-generate the autotooling by splitting AX_TLS and CHECK_GNU_MAKE
to acinclude.m4.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The -t option is documented as deprecated in GNU's mktemp, and
FreeBSD's mktemp doesn't support it at all.
Replace it with the construct "mktemp ${TMPDIR:-/tmp}/foo.XXXXXX"
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In addition, incorporate the test name into the e2fsprogs-tmp to make
it easier to debug left-over temp files in the future.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Quiet a couple of build warnings in tst_libext2fs.c
Add missing unistd.h header for misc/util.c.
Ignore generated files for lib/ext2fs/tst_libext2fs and intl/ files.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
My old patch:
resize2fs: don't print minimum size if fs is not clean
almost did this, but it still calculated the size; it just didn't print
it. Which is a bit silly.
Jes had a pretty badly corrupted image which made the minimum size
calculation go off into the weeds. It was corrupted, and also marked
as having an error.
We'll eventually bail out for an unmounted filesystem if it's marked
as being in an error state anyway; just move that test & bail-out
to a much earlier point, and remove the now-duplicate one under the
print_min_size block.
This will catch & block all resize operations on an offline filesystem
with errors, in one central place.
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This makes it easier for translators to look up what they've done.
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It can be made simpler because there is no need to differentiate between
having an internal journal inode and having an external journal device.
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>