If the number of block groups is greater than half the flex_bg size,
the journal we be placed in the flex_bg super-group which is closest
to the mid-point of the filesystem, and in the first free block group
beyond where the metadata for the flex_bg is stored.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Provide a C language wrapper function for io_channel_read_blk64() and
io_channel_write_blk64() instead of using a C preprocessor macro, with
an fallback to the old 32-bit functions if an application-provided I/O
channel manager doesn't supply 64-bit method functions and the block
numbers can fit in 32-bit integer.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is needed so that extent-based inodes (including a journal inode)
can be created via block_iterate.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This speeds up access to the journal by eliminating worst-case seeks
from one end of the disk to another, which can be quite common in very
fsync-intensive workloads if the file is located near the end of the
disk, and the journal is located the beginning of the disk.
In addition, this can help eliminate journal fragmentation when
flex_bg is enabled, since the first block group has a large amount of
metadata.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Give a boost to dm devices which are not used to build other dm
devices, since "leaf" devices are generally more likely to be
interesting as devices to mount.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
blkid_devdirs was defined in blkidP.h and was never intended to be
used outside of the library. Since it no longer needs to be shared
across object files, rename it and turn it into a static variable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit works by removing all calls from libdevmapper altogether,
and using the standard support for "normal" non-dm devices.
It depends on dm devices being placed in /dev/mapper (but the previous
code had this dependency anyway), and /proc/partitions containing dm
devices.
We don't actually rip out the libdevmapper code in this commit, but
just disable it via #undef HAVE_DEVMAPPER, just so it's easier to
review and understand the fundamental code changes. A subsequent
commit will remove the libdevmapper code, as well as unexport
the blkid_devdirs string array.
Thanks to Karel Zak for inspiring me to look at the dm code in blkid,
so I could realize how much it deserved to ripped out by its roots. :-)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The rec_len field in the directory entry is 16 bits, so if the
filesystem is completely empty, rec_len of 0 is used to designate
65536, for the case where the directory entry takes the entire 64k
block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rename crc16 to ext2fs_crc16, and make crc16_table static, since
there's not reason it should be exposed at all.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Print out the currently supported features of e2fsprogs/libext2fs
via a new "debugfs supported_features" command. This helps scripts
to know whether it is possible to try and enable specific features
in the filesystem.
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make the dblist grow more quickly when many directory blocks are added,
otherwise the array has to get copied too often, which is slow when it
is large.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Check to make sure a JFS filesystem is really correct by checking the
relationship between the following fields in the JFS superblock:
s_bsize, s_l2bsize, s_pbsize, s_l2pbsize, and s_l2bfactor. Thanks to
Lesh Bogdanow for this suggestion.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
OS/2 and DFSee creates a pseudo FAT-12/16 header in the first 512
bytes of a filesystem which looks enough like a FAT-12/16 to fool
blkid. Part of this is because we don't require ms_magic or vs_magic
to be the strings "FAT12 ", "FAT16 ", or "FAT32 ", since some FAT
filesystem formatters don't set ms_magic or vs_magic. To address
this, we explicitly test for "JFS " and "HPFS " in ms_magic,
and if they are found, we assume the filesystem is definitely not
a FAT filesystem.
Addresses-Launchpad-Bug: #255255
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Below patch ensures that cleanup is done properly in ext2fs_initialize
from all return paths in case of errors.
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some bootloaders, like SILO, don't provide sprintf in their limited
bootloader environment. Since the uses in rw_bitmaps.c is only doing
sprintf("foo %s"), it's easy to replace that usage with strcpy/strcat.
Addresses-Sourceforge-Bug: #2049120
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the allocation functions need to allocate out of a block group
where the inode and/or block bitmaps have not yet been initialized,
initialize them so ext2fs_new_block() and ext2fs_new_inode() work
correctly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Resize2fs needs to be able to relocate the interior nodes of an extent
tree. Add support for this feature via ext2fs_extent_replace().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When resize2fs moves blocks belonging to an inode, it will call
ext2fs_extent_set_bmap() for logical blocks 0, 1, 2, 3, ...
Optimize for this calling pattern so we don't end up creating a
separate extent for each block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When replacing a single block extent, make sure we set or clear the
uninitialized extent flag as requested by the caller.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When setting a logical block which is before the first extent in the
extent tree, make sure the new extent goes in front, at the very
beginning of the extent tree. This fixes a bug where previously the
new extent would be inserted out of order in this case.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a signed vs. unsigned bug that was accidentally introduced in
commit f1f115a7, which was introduced in e2fsprogs 1.41.0
Addresses-Debian-Bug: #495830
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Memory allocated for the ext2_extent_handle is not getting freed from
all the return paths in case of error. Below patch fixes it.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As Li Zefan <lizf@cn.fujitsu.com> reported, the creation timestamp was
not getting set on the lost+found inode. This patch makes sure all of
the timestamps are appropriately set.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes a bug where if there is an entry in the /etc/blkid.tab file
for a particular device (major, minor) number but the filename does
not exist, blkid wouldn't try to find the correct filename.
Addresses-Debian-Bug: #493216
Disordered inode tables may appear when inode_blocks_per_group is lesser
or equal to the number of groups in a flex group.
This bug can be reproduced with:
mkfs.ext4 -t ext4dev -G512 70G
In that case, you can see with dump2fs that inode tables for groups 510
and 511 are placed just after group 51's inode table instead of being
placed after group 509's inode table.
Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It looks like the right place to check for ino=0 in
ext2fs_read_inode_full() is before creating the inode cache, otherwise
since we set icache[i].ino = 0 in create_icache(), it will match the
loop below and thus we return a wrong value.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There were a few places where we don't check to make sure
dev->bid_type is non-NULL before dereferencing the pointer, mostly in
debug code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_group_desc_csum_verify() is always checking the bg_checksum (to
make sure it is zero) even when the GDT_CSUM feature is not present.
This is normally OK, but apparently there are filesystems in the wild
where this field has not be initialized to zero.
Addresses-Debian-Bug: #490637
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On Solaris setbuf() will discard any pending output to the stream, so
make we call fflush() before calling setbuf().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Solaris's header files are very picky about which C compiler can be
used for SUSv3 conformance. Use of C99 is not compatible with SUSv2
(_XOPEN_SOURCE=500), and C89 is not compatible with SUSv3
(_XOPEN_SOURCE=600). Since we need some SUSv3 functions, consistently
use SUSv3 so that e2fsprogs will build on Solaris using c99.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we fail doing ext2fs_allocate_block_bitmap() or
ext2fs_allocate_inode_bitmap() we directly goto cleanup and don't free
the memory allocated to buf.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck could to do more damage to a filesystem by trying to relocate
inode tables due to corrupted block group descriptors, and the
relocation could seriously damage the filesystem.
This patch enhances ext2fs_check_desk() so it detects more
self-inconsistent block group descriptors, including the cases where
e2sck might be tempted to relocate the inode table, and reports the
block group descriptors as invalid; this will cause e2fsck to attempt
to use the backup superblocks, which hopefully have not been trashed.
Addresses-Sourceforge-Bug: #1840291
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also change mke2fs.conf to enable huge_file,dir_nlink,extra_isize, and
uninit_bg by default for ext4 filesystems, and enable extra_isize in
the library as well.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The blkid/tests contains new tests for swap, but the type-1 swapfile
test depends on mkswap supporting the "-U" option to specify the UUID.
This is not available even on relatively recent versions of mkswap
(2.13.1 16-Jan-2008) so the test needs to be changed to handle this.
If the "-U" option is not supported, don't verify the UUID in the blkid
output during testing.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The offset for both inode bitmaps and inode tables is overshot by one
block causing a hole between the group of bitmaps and inode tables
when initializing a filesystem using mke2fs.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There could be stale entries in blkid file, so if the device does not
exist, skip it.
Addresses-Debian-Bug: #487758, #487783
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to use list_for_each_safe in case a device gets removed from
the list during garbage collection.
Also make the manpage slightly more informative about
what the -g garbage collection option does.
Addresses-Debian-Bug: #487758, #487783
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
extent.c should only try to include ss/ssh.h when it is compiled with
-DDEBUG. Otherwise it's not necessary and it breaks the Debian MIPS
build (and the Debian MIPS build only) because it tries to build
libext2fs without building libss as part of a MIPS-specific build
rule.
Addresses-Debian-Bug: #487675
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some architectures (ppc ...) need a bigger swapfile than is shipped,
in the test image so the current re-make of swap was failing.
We could either ship a bigger image or just dd a bigger file...
There is one more minor problem with the tests; older mkswap does not
support the -U uuid specification. I'm not sure offhand what to do
about that problem, or if it really needs fixing.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Modern gcc accepted what was there previously, but it's clearly not
correct C code, and this may have been the explanation for why a user
trying to compile a recent version of e2fsprogs failed to do so on Red
Hat 7.3.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This could cause certain mke2fs feature combinations to result in the
initial blocks of the inode table getting wiped out when the journal
is created.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The public header files depend on the the autoconf defines
WORDS_BIGENDIAN and HAVE_SYS_TYPES_H, so we add them to ext2_types.h
so that external programs which try to use ext2fs_swap*() will work
correctly on big-endian systems. Fortunately, few if any programs
need to use this libext2's byte-swap functions directly.
Addresses-Debian-Bug: #484879
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds ZFS filesystem detection to libblkid.
It probes for VDEV_BOOT_MAGIC in the first 2 ZFS labels in big-endian
and little-endian formats.
Unfortunately the probe table doesn't support probing from the end of
the device, otherwise we could also probe in the 3rd and 4th labels (in
case the first 2 labels were accidentally overwritten)..
Eventually we would set the UUID from the ZFS pool GUID and the LABEL tag
from the pool name, but that requires parsing an XDR encoding of the pool
configuration which is not trivial.
Signed-off-by: Ricardo M. Correia <Ricardo.M.Correia@Sun.COM>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add callback functions for ext2fs_alloc_block() and
ext2fs_block_alloc_stats(). This is needed so e2fsck can be informed
when the extent_set_bmap() function needs to allocate or deallocate
blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit enables read/write access via the block iterator for
extent-based inodes.
Also fixed some bugs regarding the handling on non-leaf extent nodes
when iterating over extents in a file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_extent_delete() will also update the parent node and decrement
the inode block count.
Passing in the EXT2_EXTENT_DELETE_KEEP_EMPTY flag will allow the empty
node to remain.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allows unmapping or remapping single mapped logical blocks,
and mapping currently unmapped blocks.
Also implements ext2fs_extent_fix_parents() to fix parent
index logical starts, if the first index of a node changes
its logical start block.
Currently this can result in unnecessary new single-block extents; I
think perhaps ext2fs_extent_insert should grow a flag to request
merging with a nearby extent?
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext2fs_extent_insert finds that the requested node
for insertion is full, it will currently fail.
With this patch it will split as necessary to make room, unless an
EXT2_EXTENT_INSERT_NOSPLIT flag is passed to it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When called for a given handle, the new function extent_node_split()
will split the current node such that half of the node's entries will
be moved to a new tree block. The parent will then be updated to
point to the (now smaller) original node as well as the new node.
If the root node is requested to be split, it will move all
entries out to a new node, and leave a single entry in the
root pointing to that new node.
If the reqested split node's parent is full it will recursively
split up to the root to make room for the new node's insertion.
If you ask to split a non-root node with only one entry,
it will refuse (we'd have an empty node otherwise).
It also updates the i_blocks count when a new block has
successfully been connected to the tree.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the inode's i_block[] array is completely empty, create an empty
extent tree in the in-core inode and set the EXT4_EXTENT_FL inode
flag. This makes it easy to create a new inode using extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes problems turned up by a test case written by Erez Zadok's
group which constantly reformats filesystems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The logic for stopping at the right level in extent_goto was wrong,
so if you asked it to go to any level other than 0 (the leaf
level) it would fail.
Also add this argument to the tst_extents goto command to test it.
(I thought this was a failure in my split code but it was this
helper that was causing problems...)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Swap is actually native-endian on disk, and with the latest
swapspace sanity checks I added we need to have native swapspace
examples in the blkid tests, so re-mkswap them during testing.
One one other required change, though; mkswap requires at least
10 pages of swap, so the image needs to be increased to 10x64k
if mkswap is to succeed...
Maybe it'd be better to just dd it out on the fly?
Addresses-redhat-bugzilla: 445786
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Problem was introduced by commit a4b69b7f18
Thanks to Eric Sandeen from Red Hat for pointing out this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new function ext2fs_zero_blocks(), and use it so that journal
data blocks is written in larger chunks to speed up the creation of
the journal.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This I/O manager saves the contents of the location being overwritten
to a tdb database. This helps in undoing the changes done to the
file system.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the way we allocate bitmaps and inode tables if the FLEX_BG
feature is used at mke2fs time. It places calculates a new offset for
bitmaps and inode table base on the number of groups that the user
wishes to pack together using the new "-G" option. Creating a
filesystem with 64 block groups in a flex group can be done by:
mke2fs -j -I 256 -O flex_bg -G 32 /dev/sdX
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, the portion of the inode table for block group 0 was
always completely zero'ed out, so the ext2fs_open_inode_scan() didn't
handle a non-zero bg_itable_used value for the first block group. Fix
this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes some bugs which I introduced recently while revamping the
uninit_bg code. Since mke2fs is no longer calling
ext2fs_set_gdt_csum(), it's important that ext2fs_initialize()
correctly initialize bg_itable_unused for all block group descriptors.
In addition, mke2fs needs to zero out the the reserved inodes based on
the values of bg_itable_unused set by ext2fs_initialize().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When a nonprivileged user uses the blkid command, we want to keep the
cached filesystem information, and opening a device file could result
in an EACCESS or ENOENT (if an intervening directory is mode 700). We
were previously testing for EPERM, which was really the wrong error
code to be testing against.
Addresses-Launchpad-Bug: #220275
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mke2fs used to have special case, ugly code in
setup_lazy_bg/setup_uninit_bg flag which set the flags based on all
sorts of special cases. Change it so that it is done in libext2fs,
and fix mke2fs to use alloc_stats functions which will take care of
clearing the *_UNINIT flags automatically as needed.
This is preparatory work to make the flex_bg allocation patch much
cleaner.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This simplifies the code, and using the uninit_bg with the inode table
lazily initialized is just as good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add an explanation of exactly what ext2fs_super_and_bgd_loc() and
ext2fs_reserve_super_and_bgd_loc() do, and more importantly, exactly
what they return. Note that most callers should *not* rely on the
return value since it's rarely useful, especially once the flex_bg
feature is enabled and inode table and allocation bitmap blocks may
not be in the block group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function tried to set BLOCK_UNINIT based on the return value of
ext2fs_super_and_bgd_loc. That's not something that works once we
start allowing flex_bg since the block group metadata might not be
located in the blockgroup itself.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It used to be the case that ext2fs_set_gdt_csum set the ITABLE_ZEROED
flag if the INODE_UNINIT is not set. This assumed that the only
caller of ext2fs_set_gdt_csum was e2fsck (which was not true), and
that e2fsck would take care of zeroing the inode table (whic was also
not true).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make dumpe2fs and debugfs print out the s_min_extra_isize and
s_wanted_extra_isize fields from the superblock.
Update tests expect files as appropriate.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Set the s_min_extra_isize and s_wanted_extra_isize superblock fields
to reasonable defaults in ext2fs_initialize().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
mkswap followed by pvcreate on a block device
will still turn up as "swap" in blkid, because
pvcreate isn't particularly careful about zeroing
old signatures. (neither is mkswap, for that matter).
Testing for appropriate version and page counts
gives us a bit more confidence that we have a
real swap (v1) partition.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This was the original name used by Lustre's patches; keep the plural
when converting feature names to a feature mask for compatibility's
sake.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allow the old name of uninit_groups when converting feature names for
backwards compatibility for scripts running mke2fs and tune2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make sure that extent_goto() leaves us at the last extent
prior to the requested logical block, if the logical block
requested lands in a hole.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_extent_insert() only did a memmove if path->left
was > 0, but if we are at the last extent in the node,
path->left == 0, and this node must be moved before the
current extent is replaced with the newly inserted node.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
$(LIBSS) should automatically include @DLOPEN_LIB@ so the right thing
happens for programs that need to use the ss library.
Reorder the library link order for tst_extents since the blkid library
uses libuuid functions.
Thanks to Eric Sandeen for pointing this problem out!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fedora seems to be gearing up to add
-Werror-implicit-function-declaration
to the standard build flags, so I thought I'd get out ahead
of this one...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Thanks to Max Lindner (lokimuh) for pointing this out.
I'm playing around a bit with ext2 and multi-user encryption and I
need space for my key management. So I set s_first_data_block to 4000
or something like that.
This way mke2fs segfaults when executing
ext2fs_create_resize_inode() because
blk_t goal = 3 + sb->s_reserved_gdt_blocks + fs->desc_blocks +
fs->inode_blocks_per_group;
will produce a integer underrun later and segfault then in the
ext2fs_test_bit assembler inline function.
when exchanging 3 with 2 + sb->s_first_data_block, mke2fs does not
segfault.
I'm not 100% sure if thats the correct way dealing with this issue
but I think its a proper solution.
Addresses-Sourceforge-Bug: #1935847
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some library makefiles use $(LIB)/$(LIBRARY).a as a dependency for the
static library built by the makefile fragment. Add it as a target
created when building $(LIBRARY).a so that it is rebuilt when necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the function signature so that ext2fs_set_gdt_csum() returns an
error code.
If the inode bitmap hasn't been loaded return EXT2_ET_NO_INODE_BITMAP.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Never set the UNINIT_BLOCKS flag for the last group since the kernel
doesn't handle the case graefully if there is a full set of blocks in
each blockgroup marked UNINIT_BLOCKS. The kernel should be fixed up,
but in the meantime this avoids hitting the problem, and is more
consistent with lazy_bg not marking the last group UNINIT.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Only mark the superblock as dirty if the function actually managed to
change part of the block group descriptor.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_swap_inode_full() was incorrectly swapping the i_block array
for extents.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_extent_get() function was not OR-ing together UNINIT
and LEAF flags in the case where an extent was both; so if we
had an extent which was both uniint and leaf, pass1 would bail
out where depth == max_depth but was not marked as leaf, and
e2fsck (from the next branch) would abort with:
e2fsck 1.40.8 (13-Mar-2008)
Pass 1: Checking inodes, blocks, and sizes
Error1: No 'down' extent
Aborted
Also, if the error is encountered again, print the inode number
to aid debugging until it's properly handled, at least.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This name is a more intuitive option when running mke2fs.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- Add support for computing CRC-16 value.
- Add call to check/verify/set csum on block_groups.
- Add a test program to verify csum operations.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch includes the changes required to e2fsck to understand the
nlink count changes made in the kernel.
In e2fsck pass 4, when we fetch the actual link count, if it is
exceeds 65,000 we set the link count to 1. We silently fix the
situation where the nlink count of the directory is 1, and there are
fewer than 65,000 subdirectories, since since that can happen
naturally.
Patch originally from CFS, significantly rewritten by Theodore Ts'o.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In order to more accurately count the number of directories, which
with the DIR_NLINKS feature can now be greater than 65,000, change
icount to use a 32-bit counter. This doesn't cost us anything extra
when the icount data structures are stored in memory, since due to
padding for alignment reasons.
If the actual count is greater than 65,500, we return 65,500. This is
because e2fsck doesn't actually need to know the exact count; it only
needs to know if the number of subdirectories is greater than 65,000.
In the future if someone really needs to know the exact number, we
could add a 32-bit interface. One isn't needed now, though.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
No application will ever use the ORPHAN_FS flag, since it only shows
up in kernel memory, but it's been pointed out it was first used in
ext3, and so it should be renamed for accuracy.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After the fix for resize2fs's inode mover losing in-inode
extended attributes, the regression test I wrote caught
that the attrs were still getting lost on powerpc.
Looks like the problem is that ext2fs_swap_inode_full()
isn't paying attention to whether or not the EA magic is
in hostorder, so it's not recognized (and not swapped)
on BE machines. Patch below seems to fix it.
Yay for regression tests. ;)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_extent_insert() was copying n-1 of the existing extents when
moving things down to make room for the new extent.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When deleting the last entry in a node, back up the current pointer so
it is always pointing at a valid entry.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add 64-bit block capable routines to inode IO manager. Since fileio.c
does not yet have 64bit support, these routines will not handle 64bit
block numbers correctly yet.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In order to provide 64-bit block support for IO managers an maintain
ABI compatibility with the old API, some new functions need to be
added to struct_io_manger. Luckily, strcut_io_manager has some
reserved space that we can use to add these new functions.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add two new functions which allows the caller to examine the last
directory block entry added to the list, and to drop if it necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a device mapper volume disappears while libblkid code is running,
it is possible for the devicemapper code to return errors, and since
libblkid wasn't checking for error returns, it would dereference a
null pointer and crash. Add error checking to prevent this.
Addresses-RedHat-Bugzilla: #433857
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a flag which returns the partially completed filesystem object so
e2fsck can print more intelligent error messages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This creates a new enhanced edit_feature function for libe2p which
supports a different set of feature flags that are OK to clear as
opposed to set, and which returns more specific information about why
the user provided an invalid edit feature command.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a block buffer was not supplied and ext2fs_alloc_block() returned
with no errors, it would leak a temporary block buffer.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is useful for mballoc to align block allocation on the RAID
stripe boundaries.
Signed-off-by: Rupesh Thakare <rupesh@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add vertificaton of the in-inode EA information, and allow in-inode
EA's to have a checksum.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Responsibility for byte swapping the extents information rests with
the low-level extent code, which translates the on-disk extents
information to the abstract extent format. The on-disk format will
eventually get more complicated, in order to add support for 64-bit
block numbers, bit-compressed extents, etc. So to avoid needing to
expose all of that complexity in swapfs.c, the in-memory contents of
i_blocks will not be byte-swapped and will be identical to the on-disk
format.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The major changes were:
* Fix realloc() leak on failure case from Jim Meyering
* Fixed various problems in transaction lock code
* Made transaction_brlock() static
* Added more fine-grained locking features
Moved from svn revision #22080 to #23590
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
DJGPP lacks sys/select.h and sys/un.h; add header checks to be more
portable.
Signed-off-by: Christophe Grenier <grenier@cgsecurity.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cygwin doesn't support lockf(), so move to fcntl() locking as more
portable. Also fix a bug which could cause get_lock() to loop forever
if the attempt to lock the file fails for some reason.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This flag allows the caller to promise that it will not try to modify
the block numbers returned by the iterator.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Address the theoretical problem of two threads trying to format a
different unknown error code by using TLS.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
USB devices can return ENOMEDIUM, and when the filesystem cached
information wasn't flushed, it resulted in the wrong location of a
filesystem to be returned to the caller. The only justification for
using cached information when the open fails is in the case of a
permission denied error.
Addresses-Debian-Bug: #463787
Add logic that on Linux systems will check for the presence of the
ext4dev filesystem; if it isn't present, fall back to ext4 for
filesystems that are marked as being "OK for use on test filesystem
code". If they are OK for use for in-development filesystem code, it
should also be fine to use stable filesystem code if there is no test
filesystem code (ext4dev) available.
The reverse is not true, of course. We don't ever want to mount a
production filesystem using test filesystem code unless the user gives
us explicit permission via "tune2fs -E test_fs".
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously we used a hard-coded test where for the Alpha and the IA64,
we used lseek instead of llseek(). Generalize this to whenver
sizeof(long) is the same as sizeof(long long).
It turns out this fixes a FTBFS problem on the x86_64 for Debian,
since dietlibc doesn't provide llseek() on that architecture.
Addresses-Debian-Bug: #459614
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The test_fs flag is an "ok to be used with test kernel code" flag. It
makes it easier for us to determine whether a filesystem should be
mounted using ext4 or not.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ensure the length of the UUID is always the same
without the patch:
% blkid /tmp/a /tmp/b
/tmp/a: UUID="7130E4771519577F" TYPE="ntfs"
/tmp/b: UUID="7E9B4A7CCE99CA" TYPE="ntfs"
with the patch:
% blkid /tmp/a /tmp/b
/tmp/a: UUID="7130E4771519577F" TYPE="ntfs"
/tmp/b: UUID="007E9B4A7CCE99CA" TYPE="ntfs"
ie same as:
% vol_id --uuid /tmp/a ; vol_id --uuid /tmp/b
7130E4771519577F
007E9B4A7CCE99CA
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Approximately two years ago a revamp of the e2fsprogs build
infrastructure broke the Makefile fragments for building BSD, Solaris,
and Darwin shared libraries, as well as profiling and checker
libraries. Apparently no one had noticed except for
pierre42@users.sourceforge.net.
Addresses-Sourceforge-Bug: #1819034
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When compiling with diet libc, <sys/types.h> must be included in order
to define the types used in asm/types.h. Strange choice, but
workable. This doesn't cause much problems for e2fsprogs except
blkid/tst_types.h, which needed a #include of <sys/types.h>.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When compiling with dietlibc, sys/syscall.h isn't supported; as of
dietlibc 0.30, it exists but it references a non-existent asm/unistd.h
header file. So we have to test for its existence and avoid using it
in lib/uuid/gen_uuid.c if it is not supported.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a configure option which causes the uuidd helper daemon not to be
built or used by the uuid library.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
inode_uid() and inode_gid() weren't getting defined on systems that
were not Linux, Hurd, or Masix.
Addresses-Sourceforge-Bug: #1859778
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add some additional checks, primarily in resize2fs and in the rarely
used (and soon to-be-deprecated) e2fsck byte-swap filesystem function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we fail to create the uuidd daemon after 5 or 6 tries, another
10,000 tries probably won't be successful.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The uuidd process will fork and let the parent process exit to create
the daemon. So use waitpid to reap the zombie, as well as using it to
time when it is safe to try to connect to the daemon.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/var/run can get completely removed at reboot, and uuidd doesn't have
permissions to recreate /var/run/uuidd. So instead use
/var/lib/libuuidd for the unix domain socket and pid files.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also store the clock sequence information in a state file in
/var/lib/misc/uuid-clock so that if the time goes backwards the clock
sequence counter can get bumped. This allows us to completely
correctly generate time-based (version 1) UUID's according to the
algorithm specified RFC 4122.
Addresses-Sourceforge-Bug: #1529672
Addresses-Red-Hat-Bugzilla: #233471
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On 64-bit systems (or anything with sizeof(long) > sizeof(int)), we
sometimes get error codes passed to error_message which have been cast
from an (int) to an (unsigned int). This almost always happens if
you're using libgssapi_krb5, which returns an error code which is less
than 0 but is returned in an (unsigned int).
For example, -1765328377L gets cast to 2529638919, which is
0x96c73a07, not 0xffffffff96c73a07, so error_message() fails to find a
matching error table.
When error_message() then calls the error_table_name() function to get a
name to use in the "unknown code" message, it gets a correct value back.
This happens because error_table_name() drops most of the higher bits of
the parameter it's passed before doing anything else with it (& 077777777f,
or & 0xffffff). If we did the same thing in error_message(), we wouldn't
have a problem there, either.
Problem reported and fixed by: Nalin Dahyabhai
Addresses-Sourceforge-Bug: #1809658
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The "make check" test in lib/ss would fail if '.' is not in the user's
PATH, and if the libss shared library had not yet been installed yet.
Addresses-Sourceforge-Bug: #1848974
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that e2fsck tries to backup the primary superblock to the backups
when the feature sets ar different, it's important when tune2fs writes
out a changed superblock, that we filter out the
EXT3_FEATURE_INCOMPAT_RECOVER feature to the backup superblocks, since
it will be removed from the primary superblock either when the
filesystem is mounted uncleanly or when journal is replayed.
Addresses-Debian-Bug: #454926
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This addresses a potential security vulnerability where an untrusted
filesystem can be corrupted in such a way that a program using
libext2fs will allocate a buffer which is far too small. This can
lead to either a crash or potentially a heap-based buffer overflow
crash. No known exploits exist, but main concern is where an
untrusted user who possesses privileged access in a guest Xen
environment could corrupt a filesystem which is then accessed by the
pygrub program, running as root in the dom0 host environment, thus
allowing the untrusted user to gain privileged access in the host OS.
Thanks to the McAfee AVERT Research group for reporting this issue.
Addresses CVE-2007-5497.
Signed-off-by: Rafal Wojtczuk <rafal_wojtczuk@mcafee.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A missing dependency on ss_err.h meant that std_rqs.o could fail when
e2fsprogs was being built using make -j.
Thanks to Robert Kerr for reporting this bug.
Addresses-Sourceforge-Bug: #1842331
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The heuristics in blkid/devname.c probe_all() for scanning whole disks
with no partitions assume that a device name with no digit on the end
will always be present as a delineator, i.e.:
sda
sda1
sdb
sdc
In this case, when sdc is seen, it's the clue to go back and scan sdb.
However, for something like:
sda
sda1
sdb
loop0
this falls down, and sdb is never scanned.
(thanks to Karel Zak for pointing this out).
Addresses-Red-Hat-Bugzilla: #400321
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We cannot merge a removed directory entry to just arbitrary previous
directory entry. The previous entry must be in the same block. So
really bad things can happen when are deleting the first directory
entry in a block where the last directory entry in the previous
directory block is not in use. We fix this bug by checking to see if
the current entry is not the first one in the block before trying to
merge it to the previous entry.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On my FC8 install, ismounted.c fails to build because open(O_CREAT) is
used without passing a mode. The following trivial patch fixes it.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add FLEX_BG as a supported feature bit.
Add support to mke2fs to create filesystems with FLEX_BG.
Add support to tune2fs to add (and remove, if it won't break
filesystem consistency) the FLEX_BG feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
lib/e2p/feature.c | 2 ++
lib/ext2fs/ext2fs.h | 6 ++++--
misc/mke2fs.c | 7 ++++++-
3 files changed, 12 insertions(+), 3 deletions(-)
The FLEX_BG feature allows the inode table, block bitmap, and inode
bitmaps to be located anywhere in the filesystem. Update e2fsck and
libext2fs's checking code to recognize this.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
e2fsck/super.c | 14 ++++++++++++--
lib/ext2fs/check_desc.c | 15 +++++++++++++--
2 files changed, 25 insertions(+), 4 deletions(-)
All files under $(OBJS) and $(SRCS) should be in alphabetical order
but this is not always the case. Let fix some some of these before
applying new files to the list of $(SRCS).
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
lib/ext2fs/Makefile.in | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
According to pkg-config(1) manual page, private libraries should be
defined by "Libs.private:" line. Private libraries are libraries which
are not exposed through our library, but are needed in the case of
static linking.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When fgets() function fails, contents of the buffer is undefined. That
is, fgets() return value needs to be checked, to avoid undefined behavior.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To allow error messages to be reflected up, if the callback function
returns a non-zero value, bump a counter and return the number of
times the callback function signals an error by returning a non-zero
status code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
squashfs has no uuid or labels, so all we need is the magic
(for big-endian too!)
Addresses-Red-Hat-Bugzilla: #305151
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Add macros to support variable-length group descriptors for ext4.
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use ext2fs_group_first_block() instead of the open-coded equivalent in
ext2fs_super_and_bgd_loc() and ext2fs_descriptor_block_loc().
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
libblkid: recognize squashfs filesystems
squashfs has no uuid or labels, so all we need is the magic.
Addresses-Red-Hat-Bugzilla: #305151
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
ext2fs_dblist_dir_iterate() calls ext2fs_dblist_iterate(), which calls
ext2fs_process_dir_block(), which in turn calls the helper function
db_dir_proc() which calls callback function passed into
ext2fs_dblist_dir_iterate(). At each stage the conventions for
signalling requests to abort the iteration or to signal errors
changes, db_dir_proc() was not properly mapping the abort request back
to ext2fs_dblist_iterate().
Currently db_dir_proc() is ignoring errors (i/o errors or directory
block corrupt errors) from ext2fs_process_dir_block(), since the main
user of ext2fs_dblist_dir_iterate() is e2fsck, for which this is the
correct behavior. In the future ext2fs_dblist_dir_iterate() could
take a flag which would cause it to abort if
ext2fs_process_dir_block() returns an error; however, it's not clear
how useful this would be since we don't have a way of signalling the
exact nature of which block had the error, and the caller wouldn't
have a good way of knowing what percentage of the directory block list
had been processed. Ultimately this may not be the best interface for
applications that need that level of error reporting.
Thanks to Vladimir V. Saveliev <vs@clusterfs.com> for pointing out
this problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The FAT filesystem doesn't have its superblock with a set of magic
strings in a fixed location. Therefore, we must also check for the
FAT filesystem if it looks like we have an MBR at the beginning of the
partition. We previously checked if the first byte was a jump
instruction but that missed some USB disks with only one bootable
partition. Now we check for the MBR signature (0x55AA at offset 510)
as well as any partition where byte 0 is \351 or \353.
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Any attempt to open a filesystem with s_inode_size set to zero causes
a floating point exception. This is true for e2fsck, dumpe2fs,
e2image, etc. Fix ext2fs_open2() so that it returns the error code
EXT2_ET_CORRUPT_SUPERBLOCK instead of crashing.
Thanks to Dean Bender for reporting this bug.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch instruments the libext2fs unix I/O manager and adds bytes
read/written and data rate to e2fsck -tt pass/overall timing output.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new functions ext2fs_{set,get}_{inode,block}_bitmap_range()
which allow programs like e2fsck, dumpe2fs, etc. to get and set chunks
of the bitmap at a time.
Move the representation details of the 32-bit old-style bitmaps into
gen_bitmap.c.
Change calls in dumpe2fs, mke2s, et. al to use the new abstractions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the 32-bit specific bitmap code into gen_bitmap.c, and the
high-level interfaces into bitmaps.c. Eventually we'll move the
new-style bitmap code into gen_bitmap64.c, but first we need to
isolate the code with knowledge of the bitmap internals in one place
first.
In this patch we move allocation, free, copy, clear, set_padding, and
fudge_end function into gen_bitmap.c, and make sure that the bitmaps.c
and bitops.c no longer have any knowledge of the bitmap internals.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This changes ext2fs_fast_{mark,unmark,test}_{inode,block}_bitmap() to
be inline functions which calls ext2fs_{mark,unmark,test}_generic_bitmap().
This is part of the preparation to support the new-style bitmaps.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The test in ext2fs_check_desc() is off by one; if the inode table
goes all the way to the last block of the block group, it will
falsely assert that it has extended past it. The last block
of a range is start + len -1, not start + len.
You can create (valid) filesystems that will cause e2fsck to complain
via one of the following mkfs commands:
mkfs.ext3 -F -b 1024 /dev/sdb1 2046000000
mke2fs -j -F -b 4096 -m 0 -N 5217280 /mnt/test/fsfile2 327680
mkfs.ext2 -F -b 1024 -m 0 -g 256 -N 3744 fsfile 1024
Addresses-Red-Hat-Bugzilla: #214765
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For some odd geometries*, mkfs will try to allocate inode tables off
the end of the block group and fail, rather than warning that too
many inodes have been requested.
This is because when ext2fs_initialize calculates metadata overhead,
it is only adding in group descriptor blocks and the superblock
if the *last* bg contains them - but the first bg also has all of
the various metadata bits taking up space.
We need to calculate the overhead both for the first block group and
the last block groups separately, since the two different tests need
to know what the overheads are for those two cases, which may be
different.
*for example "mke2fs -b 1024 -m 0 -g 256 -N 3745 fsfile 1024"
(Note, the test here is a little funky; the expected output is
actually a mkfs failure - but a proper failure instead of the
allocator catching the problem at the last minute)
Addresses-Red-Hat-Bugzilla: #241767
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to set t->i_file_acl before we test it in
ext2fs_inode_data_blocks()
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This particular bit of code has caused problems before, so make it
easier to debug problems caused by the probe verification looping
forever here.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that we are moving to x.y.z version number scheme for maintenance
releases, we ned to change ext2fs_parse_version_string and
blkid_parse_version_string to ignore the second period so we don't
have maintenance releases with a substantially bigger verison number
than the initial x.y release.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When revalidating a partition where there is obsolete information in
/etc/blkid.tab, we end up freeing a the type tag without clearing
dev->bid_type, causing blkid_verify() to loop forever.
Addresses-Debian-Bug: #432052
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On big-endian systems, while swapping, ext2fs_swap_inode_full() swaps
only 128+extra_isize bytes and the EAs if they are present. Now if inode
N has EAs, (and this is the inode in the "scratch inode") then inode N+1
also carries seems to have them since the "scratch inode" was never
zeroed.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix the info-dir line so that the menu name does not contain a .info
prefix. First of all, it's ugly, secondly, it causes the install-info
command to fail to remove the com_err info file from the
/usr/share/info/dir file when the comerr-dev package is removed and
purged.
Addresses Debian Bug: #401711
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for cryptsetup-luks (http://luks.endorphin.org)
UUIDs to libblkid. This is required p.e. to avoid hardcoding device
names for encrypted partitions. Could you please take a look at it and
consider inclusion in the next e2fsprogs release ?
Signed-off-by: Karsten Hopp <karsten@redhat.com>
This patch changes ext2fs_open() to set EXT2_FLAG_MASTER_SB_ONLY by
default. This avoids some problems in e2fsck (reported by Jim Garlick)
where a corrupt journal can end up writing the bad superblock to the
backups. In general, only e2fsck (after the filesystem is clean),
tune2fs, and resize2fs should change the backup superblocks by default.
Most callers of ext2fs_open() should not be touching anything where the
backups should be touched. So let's change the defaults to avoid
potential problems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There have been reported instances of a filesystem having been mounted
at 2 places at the same time causing a lot of damage to the
filesystem. This patch reserves superblock fields and an INCOMPAT flag
for adding multiple mount protection(MMP) support within the ext4
filesystem itself. The superblock will have a block number
(s_mmp_block) which will hold a MMP structure which has a sequence
number which will be periodically updated every 5 seconds by a mounted
filesystem. Whenever a filesystem will be mounted it will wait for
s_mmp_interval seconds to make sure that the MMP sequence does not
change. To further make sure, we write a random sequence number into
the MMP block and wait for another s_mmp_interval secs. If the
sequence no. doesn't change then the mount will succeed. In case of
failure, the nodename, bdevname and the time at which the MMP block
was last updated will be displayed. tune2fs can be used to set
s_mmp_interval as desired.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Store the RAID stride value when a filesystem is created with a requested
RAID stride, and then use it automatically in resize2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fortunately bid_type isn't used much, and bid_label and bid_uuid is
only used by debugging code, so the impact of this bug was very
minor.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mke2fs is supposed to set the uid/gid ownership of the root directory when
a non-rooot user creates the filesystem. This wasn't working correctly
if the uid/gid was > 16 bits. In additional, debugfs wasn't displaying
large uid/gid's correctly. This patch fixes these two programs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The l_i_version field is now defined from the old l_i_reserved1 field in
the ext2 inode. This field will be used to store high 32 bits of the
64-bit inode version number.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a problem byte-swapping fast symlinks inodes that contain extended
attributes.
Addresses Red Hat Bugzilla: #232663
Addresses LTC Bugzilla: #27634
Signed-off-by: "Bryn M. Reeves" <breeves@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The second part of UUID was copied to a wrong place in the buffer.
Now the UUID shown by blkid is the same as shown by /lib/udev/vol_id
(at least with udev-108), but is not in the same form as used by mdadm
(which prints UUID as 4 32-bit words and uses different endiannes).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
MD 0.90 superblock format is host endian - need to check for bith big
endian and little endian magic. Without this change MD components
created on little endian systems were not detected as such, which
could then lead to false positives when detecting filesystems.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Add support for using TDB to store the icount data, so we don't run out
of memory when checking really large filesystems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The following patch addresses a memory leak in libext2fs
that occurs when using ext2fs_write_new_inode() on a file system
configured with large inodes.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Prevent floating point precision errors on really big filesystems from
causing the search interpolation algorithm in the icount abstraction
from looping forever.
Addresses Debian Bug: #411838
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This was actually a bug in libe2p's parse_num_blocks() function. When
handling the 's' suffix, it was ignoring the blocksize information
passed in from the caller and always interpreting the number in terms of
a 1k blocksize.
Addresses Debian Bug: #408298
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use pre-existing early exit label in function to handle proper
error code return and local memory allocation cleanup.
Coverity ID: 23: Resource Leak
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fix a memory leak by freeing the argv[] array if ss_parse_line returns 0
for argc 0 (which will happen if the user his return and sends an empty
line to the application).
Potentially need to free argv before early return since it was allocated
memory. Need to be careful since it may be possible for ss_parse() to have
freed the memory allocated to it if it detects an unbalanced set of quotes
passed to it.
Coverity ID: 21: Resource Leak
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Looks like flawed reasoning. Here if info_dir is NULL then you are
guaranteed to blow up since you will dereference it. It seems like the
correct thing to do here (what the code author meant to do) was to set
*code_ptr = SS_ET_NO_INFO_DIR if info_dir was NULL or if *info_dir was
an empty string (aka *info_dir == '\0').
Coverity ID: 8: Forward Null
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
blkid_dev_has_tag() will immediately return -1 (an error if value is
NULL. Thus at the test later on value cannot be NULL. There are two
possible ways to go about fixing this. The first would be to remove the
first NULL check for value. The second one would be to remove the
second check (and the deadcode).
I chose the second path because the functionality added is something
which a programmer could reasonably expect given the function name, and
it is highly unlikely any existing code is depending on the fact that
blkid_dev_has_tag() will return an error if value is NULL.
Coverity ID: 3: Deadcode
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the environment variable COMERR_DEBUG is set to 1, print out debugging
messages as error tables are added and removed from the com_err library.
If the COMERR_DEBUG_FILE environment variable is set (and the process is
not setuid) the debugging messages may be redirected to a file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This was causing dumpe2fs to crash on the ARM platform when examining
the badblocks list.
Also reverts an incorrect fix made by changeset 38078f692c20
Addresses Debian Bug: #397044
Add support for the new flag EXT2_FLAG_SOFTSUPP_FEATURES flag to
ext2fs_open() , which allows application to open filesystes with features
which are currently only partially supported by e2fsprogs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add support for printing the huge_file, gdt_checksum, dir_nlink,
extra_isize, extent, and 64bit features.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs and kernel implementation of directory hash tree has a
bug which causes the implementation to be dependent on whether
characters are signed or unsigned. Platforms such as the PowerPC,
Arm, and S/390 have signed characters by default, which means that
hash directories on those systems are incompatible with hash
directories on other systems, such as the x86.
To fix this we add a new flags field to the superblock, and define two
new bits in that field to indicate whether or not the directory should
be signed or unsigned. If the bits are not set, e2fsck and fixed
kernels will set them to the signed/unsigned value of the currently
running platform, and then respect those bits when calculating the
directory hash. This allows compatibility with current filesystems,
as well as allowing cross-architectural compatibility.
Addresses Debian Bug: #389772
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE (0x0040?) - add s_min_extra_isize and
s_want_extra_isize fields to superblock, which allow specifying
the minimum and desired i_extra_isize fields in large inodes
(for nsec+epoch timestamps, potential other uses). Needs RO_COMPAT
flag handling, needs e2fsck support, patch complete, little testing.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_INCOMPAT_64BIT (0x0080) - support for 64-bit block count
fields in the superblock (s_blocks_count_hi, s_free_blocks_count_hi),
large group descriptors (s_desc_size), extents with high 16 bits
(ee_start_hi, ei_leaf_hi), inode ACL (i_file_acl_hi). May also grow
to encompass the previously proposed BIG_BG.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_DIR_NLINK (0x0020?) - allow directories to have
> 65000 subdirectories (i_nlinks) by setting i_nlinks = 1 for such
directories. RO_COMPAT protects old filesystems from unlinking such
directories incorrectly and losing all files therein.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_GDT_CSUM (0x0010?) - store a crc16 checksum in
the group descriptor (s_uuid[16] | __u32 group | ext3_group_desc
(excluding gd_checksum itself)). This allows the kernel to more safely
manage UNINIT groups.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE (0x0008) - change i_blocks to be
in units of s_blocksize units instead of 512-byte sectors, use
l_i_frag and l_i_fsize as i_blocks_hi (could also be part of 64BIT).
E2fsck and debugfs changed to support i_blocks_hi instead of l_i_frag and
l_i_fsize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add in randomness based on Linux's thread id (gettid) to avoid race
conditions when two threads try to generate uuid's at the same time.
This shouldn't be an issue if /dev/urandom has proper locking and is
present, so this is just a failsafe.
Addresses SourceForge Bug: #1529672
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check for potential overflow for filesystems contained in regular files
where the filesystem image size is returned by stat64().
Signed-off-by: Eric Sandeen <esandeen@sandeen.net>
Create new ext2fs library inline functions in order to calculate
the starting and ending blocks in a block group.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
There were still some %d's lurking when we print blocks & inodes; also
many of the counters in the e2fsck_struct were signed, and probably
need to be unsigned to avoid overflows.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
For loops iterating over all group descriptors, consistently define
first_block and last_block in a way that they are inclusive of the
range, and do not overflow.
Previously on the last block group we did a test of <= first +
dec_blocks; this would actually wrap back to 0 for a total block count
of 2^32-1
Also add handling of last block group which may be smaller.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Add a new functiom, e2p_percent(), which correct calculates the percentage
of a number based on a given percentage, without worrying about overflow
issues. This is used where we calculate the number of reserved blocks using
a percentage of the total number of blocks in a filesystem.
Based on patches from Eric Sandeen, but generalized to use this new function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
For loops such as:
for (i=1; i <= fs->super->s_blocks_count; i++) {
<do_stuff>
}
if i is an int and s_blocks_count is (2^32-1), the condition is never false.
Change these loops to:
for (i=1; i <= fs->super->s_blocks_count && i > 0; i++) {
<do_stuff>
}
to stop the loop when we overflow i
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new function, ext2fs_div_ceil(), which correctly calculates a division
of two unsigned integer where the result is always rounded up the next
largest integer. This is used everywhere where we might have
previously caused an overflow when the number of blocks
or inodes is too close to 2**32-1.
Based on patches from Eric Sandeen, but generalized to use this new function
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
This patch fixes the blkid.8.in description of the "-l" option. The man
page gives the impression that the first match is the one that is returned.
However, the blkid_find_dev_with_tag() function returns the device with
the highest priority (which is good, because that is what people really want).
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
all lib/blkid/tst* files to be removed with "make clean", in particular
tst_types.c. That was causing a failure of "make check" in an RPM source
tree. Fix is to explicitly list the test binaries, as lib/ext2fs/Makefile.in
does.
As "make check" was only calling test_probe and tst_types (and none
of the other tst_* tests) it was not clear what was going on, and an
"hg update" would always return the old tst_types.c file back so the
problem was only being seen intermittently... It isn't clear whether
you want the other tst_* programs to be run as part of "make check".
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
This patch allows "inode_size" to be specified in the mke2fs.conf file,
and always compiles in the "-I" option. In addition, it disallows
specifying the inode size on rev 0 filesystems, though I don't think
this was much of a danger anyways.
Clean up dead lines in ext2fs.h.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
SPARCs do not like unaligned halfword access and throw SIGBUS.
Read data "manually" instead.
Tested on Solaris 8/SPARC with gcc 2.95.3.
Signed-off-by: Matthias Andree <matthias.andree@gmx.de>
Try DIOCGMEDIASIZE ioctl() if defined, to obtain
the media size on FreeBSD 5.0 and newer.
The binary search fallback doesn't work, as FreeBSD
block devices are unbuffered and refuse reads below
the block size.
Signed-off-by: Matthias Andree <matthias.andree@gmx.de>
When allocating space for the RAID filesystems with the stride parameter,
place each portion of the group's inode table right up after the superblock
(if present) in order to minimize fragmentation of the freespace.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This feature is initially intended for testing purposes; it allows an
ext2/ext3 developer to create very large filesystems using sparse files
where most of the block groups are not initialized and so do not require
much disk space. Eventually it could be used as a way of speeding up
mke2fs and e2fsck for large filesystem, but that would be best done by
adding an RO_COMPAT extension to the filesystem to allow the inode table
to be lazily initialized on a per-block basis, instead of being entirely initialized
or entirely unused on a per-blockgroup basis.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
uuid.c (e2p_is_null_uuid): Fix really stupid bug which could cause dumpe2fs
to fail to display a the journal or hash seed UUID. (Thanks to Guillaume
Chambraud for pointing this out.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This caused FTBFS bugs on AMD64 platforms, since it uses a different
64-bit type when compared with IA64, so we need to make our
autoconfiguration system more intelligent.
Addresses Debian Bugs: #360661, #360317
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the filesystem is opened in exclusive mode, then device will be
busy by definition, so don't return -EBUSY. This caused mke2fs -j to
fail on the 1.39-WIP (29-Mar-2006) release. (Addresses Debian Bug:
#360652)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The x86 assembly instructures for bit test-and-set, test-and-clear,
etc., interpret the bit number as a 32-bit signed number, which is
problematic in order to support filesystems > 8TB.
Added new inline functions (in C) to implement a
ext2fs_fast_set/clear_bit() that does not return the old value of the
bit, and use it for the fast block/bitmap functions.
Added a regression test suite to test the low-level bit operations
functions to make sure they work correctly.
Note that a bitmap can address 2**32 blocks requires 2**29 bytes, or
512 megabytes. E2fsck requires 3 (and possibly 4 block bitmaps),
which means that the block bitmaps can require 2GB all by themselves,
and this doesn't include the 4 or 5 inode bitmaps (which assuming an
8k inode ratio, will take 256 megabytes each). This means that it's
more likely that a filesystem check of a filesystem greater than 2**31
blocks will fail if the e2fsck is dynamically linked (since the shared
libraries can consume a substantial portion of the 3GB address space
available to x86 userspace applications). Even if e2fsck is
statically linked, for a badly damaged filesystem, which may require
additional block and/or inode bitmaps, I am not sure e2fsck will
succeed in all cases.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make the libdevmapper fail quietly if blkid is called without root
privileges or the kernel does not include device mapper support.
(What is the device mapper _library_ doing writing to stderr, anyway?)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This flag when specified to ext2fs_open or ext2fs_initialize indicates
that the application wants the io_channel to be opened in exclusive mode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new io_channel open flag, IO_FLAG_EXCLUSIVE,which requests that
the device be opened in exclusive (O_EXCL) mode. Add support to the unix_io
implementation for this flag.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add missing real-subdirs:: line to lib/Makefile.library, so there is a
default definition of the real-subdirs target.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Users have reported problems on newly installed systems when the
Macintosh's system clock battery is dead and the hardware clock is
returning a date of 1904. Turns out there were some bugs in handling
dates before the Unix epoch.
Addresses Red Hat Bug: #182188
probe.c (blkid_verify): Fix the bid_time sanity checking logic,
so that if last verification time is more recent than the
current time, or the comparison between the last
verification time and the current time causes an overflow,
a device verification will take place.
devname.c (blkid_get_dev): Set the initial bid_time to be
INT_MIN, to guarantee that blkid_verify will always be run
even when the system clock is insane.
dev.c (blkid_debug_dump_dev), read.c (debug_dump_dev),
save.c (save_dev): Fix the printf format for dev->bid_time
to match the fact that it is an signed type.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The previous fix which fixed the problem with GNU make 3.81 building
all of the library object files caused GNU make 3.80 fail because the
subdirectories (such as elfshared) were not getting created. This fix
should allow the Makefiles to work with both GNU make 3.80 and GNU
make 3.81.
If the filesystem has an external journal, store the UUID of the
external journal in the tag EXT_JOURNAL.
If the filesystem type has changed, clear all the tags on the device,
not just a preset list of LABEL, UUID, TYPE, and SEC_TYPE.
Fix a bug so that blkid_set_tag will work correctly when freeing a tag
when the input name parameter comes from the tag that we are freeing.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On systems where is multi-path storage device is problem with duplicated
filesystems. The solution is select "the best" device. This is possible
by device-mapper library.
Short quotation from RH bugzilla:
With my patch, all dm devices remains in libblkid cache.
Only the top level dm devices are given high priority
and more appropriate node names (i.e. /dev/mapper/*) are used.
For example, if we have linear mapped dm device "ov1" over
dm device "disk1p3" which is multipath mapped to /dev/sdd3 and /dev/sdh3:
# dmsetup.static ls --tree
ov1 (253:5) <-- /dev/mapper/ov1 or /dev/dm-5
`-disk1p3 (253:4) <-- /dev/mapper/disk1p3 or /dev/dm-4
`-disk1 (253:0)
|- (8:112) <-- /dev/sdh
`- (8:48) <-- /dev/sdd
Original version of blkid will show:
# ./orig/blkid -t LABEL=mpdisk1p3 -l
/dev/sdd3: LABEL="mpdisk1p3" ... TYPE="ext3"
With my patch, blkid will show:
# ./deptree/blkid -t LABEL=mpdisk1p3 -l
/dev/mapper/ov1: LABEL="mpdisk1p3" ... TYPE="ext3"
In blkid cache, all devices are listed:
# ./orig/blkid -t LABEL=mpdisk1p3
/dev/sdd3: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/sdh3: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/dm-4: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/dm-5: LABEL="mpdisk1p3" ... TYPE="ext3"
# ./deptree/blkid -t LABEL=mpdisk1p3
/dev/mapper/ov1: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/sdd3: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/sdh3: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/dm-4: LABEL="mpdisk1p3" ... TYPE="ext3"
For more details see discussion on:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=156324
Addresses Red Hat Bug: #156324
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This avoids a fd leak across an execve() which was causing problems
for the LVM tools.
(Addresses Debian Bug: #345832)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixing the problem of parallel builds sometimes not creating the library
subdirectories caused library object files to get constantly recompiled.
Fix this by remaping how the Makefile subdirectories decide to create
the subdirectories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Makefile.elf-lib, Makefile.solaris-lib: Add $(LDFLAGS) to the command line
argument when generating the shared library, to allow cross-compile
and other builds that might need to specify -L paths to needed
libraries.
Addresses Sourceforge Bug #1261549
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a dependency to make sure that the subdirectories are created before
creating all of the object files.
Addresses Sourceforge Bug: #1261553
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We no longer have the sparc assembly code in the header file any more, so we
shouldn't set _EXT2_HAVE_AS_BITOPS_. This would break compiles on the sparc
architectures when using gcc.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o