If EL3 is not supported in current configuration,
we should not try to get EL3 bitness.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1441208342-10601-2-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the YIELD instruction in the ARM and Thumb translators to
actually yield control back to the top level loop rather than being
a simple no-op. (We already do this for A64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1435672316-3311-3-git-send-email-peter.maydell@linaro.org
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The architecture defines that when taking an exception trying to
access a coprocessor register, the "preferred return address" for
the exception is the address of the instruction that caused the
exception. Correct an off-by-4 error which meant we were returning
the address after the instruction for traps which happened because
of a failure of a runtime access-check function on an AArch32
register. (Traps caused by translate-time checkable permissions
failures had the correct address, as did traps on AArch64 registers.)
This fixes https://bugs.launchpad.net/qemu/+bug/1463338
Reported-by: Robert Buhren <robert@robertbuhren.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1433861440-30133-1-git-send-email-peter.maydell@linaro.org
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of
the 85 DSP instructions (these are all Thumb2). This is enabled for
all non-M-profile CPUs with Thumb2 support, as the instructions are
mandatory for R and A profiles. On M profile they are optional and
not present in the Cortex-M3 (though they are in the M4).
The effect of this commit is that we will now treat the DSP
encodings as illegal instructions on M3, when previously we
incorrectly implemented them.
Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com>
Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com
[PMM: added clz/crc32/crc32c and default case to the early-decode switch;
minor format/spacing fixups; reworded commit message a bit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A LDRD or STRD where rd is not an even number is UNPREDICTABLE.
We were letting this fall through, which is OK unless rd is 15,
in which case we would attempt to do a load_reg or store_reg
to a nonexistent r16 for the second half of the double-word.
Catch the odd-numbered-rd cases and UNDEF them instead.
To do this we rearrange the structure of the code a little
so we can put the UNDEF catches at the top before we've
allocated TCG temporaries.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431348973-21315-1-git-send-email-peter.maydell@linaro.org
Just NOP the WFI instruction if we have work to do.
This doesn't make much difference currently (though it does avoid
jumping out to the top level loop and immediately restarting),
but the distinction between "halt" and "don't halt" will become
more important when the decision to halt requires us to trap
to a higher exception level instead.
Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Extend the ARM disassemble context to take a target exception EL instead of a
boolean enable. This change reverses the polarity of the check making a value
of 0 indicate floating point enabled (no exception).
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: Use a common TB flag field for AArch32 and AArch64;
CPTR_EL2 exists in v7; CPTR_EL2 should trap for EL2 accesses;
CPTR_EL2 should not trap for secure accesses; CPTR_EL3
should trap for EL3 accesses; CPACR traps for secure
accesses should trap to EL3 if EL3 is AArch32]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a CPU state exception target EL field that will be used for communicating
the EL to which an exception should be routed.
Add a disassembly context field for tracking the EL3 architecture needed for
determining the target exception EL.
Add a target EL argument to the generic exception helper for callers to specify
the EL to which the exception should be routed. Extended the helper to set
the newly added CPU state exception target el.
Added a function for setting the target exception EL and updated calls to helpers
to call it.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A32 encoding of LDM distinguishes LDM (user) from LDM (exception
return) based on whether r15 is in the register list. However for
STM (user) there is no equivalent distinction. We were incorrectly
treating "r15 in list" as indicating exception return for both LDM
and STM, with the result that an STM (user) involving r15 went into
an infinite loop. Fix this; note that the value stored for r15
in this case is the current PC regardless of our current mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426015125-5521-1-git-send-email-peter.maydell@linaro.org
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The MMU index to use for unprivileged loads and stores is more
complicated than we currently implement:
* for A64, it should be "if at EL1, access as if EL0; otherwise
access at current EL"
* for A32/T32, it should be "if EL2, UNPREDICTABLE; otherwise
access as if at EL0".
In both cases, if we want to make the access for Secure EL0
this is not the same mmu_idx as for Non-Secure EL0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
We currently claim that for ARM the mmu_idx should simply be the current
exception level. However this isn't actually correct -- secure EL0 and EL1
should have separate indexes from non-secure EL0 and EL1 since their
VA->PA mappings may differ. We also will want an index for stage 2
translations when we properly support EL2.
Define and document all seven mmu index values that we require, and
pass the mmu index in the TB flags rather than exception level or
priv/user bit.
This change doesn't update the get_phys_addr() code, so our page
table walking still assumes a simplistic "user or priv?" model for
the moment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
---
This leaves some odd gaps in the TB flags usage. I will circle
back and clean this up later (including moving the other common
flags like the singlestep ones to the top of the flags word),
but I didn't want to bloat this patchseries further.
The documentation states that if LSB > MSB in BFI instruction behaviour
is unpredictable. Currently QEMU crashes because of assertion failure in
this case:
tcg/tcg-op.h:2061: tcg_gen_deposit_i32: Assertion `len <= 32' failed.
While assertion failure may meet the "unpredictable" definition this
behaviour is undesirable because it allows an unprivileged guest program
to crash the emulator with the OS and other programs.
This patch addresses the issue by throwing illegal instruction exception
if LSB > MSB. Only ARM decoder is affected because Thumb decoder already
has this check in place.
To reproduce issue run the following program
int main(void) {
asm volatile (".long 0x07c00c12" :: );
return 0;
}
compiled with
gcc -marm -static badop_arm.c -o badop_arm
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added additional NS-bit to CPREG hash encoding. Updated hash lookup
locations to specify hash bit currently set to non-secure.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-7-git-send-email-greg.bellows@linaro.org
[PMM: fix uses of ENCODE_CP_REG in kvm32.c to add extra argument]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch is based on idea found in patch at
git://github.com/jowinter/qemu-trustzone.git
f3d955c6c0ed8c46bc0eb10b634201032a651dd2 by
Johannes Winter <johannes.winter@iaik.tugraz.at>.
The TBFLAG captures the SCR NS secure state at the time when a TB is created so
the correct bank is accessed on system register accesses.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-5-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor to avoid passing a CPUARMState * to disas_arm_insn(). To do this
we move the "read insn from memory" code to the callsite and pass the
insn to the function instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Passing the CPUARMState around in the decoder is a recipe for
bugs where we accidentally generate code that depends on CPU
state which isn't reflected in the TB flags. Stop doing this
and instead use DisasContext as a way to pass around those
bits of CPU state which are known to be safe to use.
This commit simply removes initial "CPUARMState *env" parameters
from various function definitions, and removes the initial "env"
argument from the places where those functions are called.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Instead of using IS_M(), use arm_dc_feature(s, ARM_FEATURE_M), so we
don't need to pass CPUARMState pointers around the decoder.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-4-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use arm_dc_feature() rather than arm_feature() to avoid using
CPUARMState unnecessarily.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
All the places where we use the ENABLE_ARCH_* and ARCH() macros have a
DisasContext* s, so switch them over to use arm_dc_feature() rather than
arm_feature() so we don't need to pass the CPUARMState* env around too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Renamed the arm_current_pl CPU function to more accurately represent that it
returns the ARMv8 EL rather than ARMv7 PL.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1413910544-20150-5-git-send-email-greg.bellows@linaro.org
[PMM: fixed a minor merge resolution error in a couple of hunks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM ARM requires that the FPINST and FPINST2 VFP control
registers are not accessible to code at EL0. We were already
correctly implementing this for reads of these registers; add
the missing check for the write code path.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1412967447-20931-1-git-send-email-peter.maydell@linaro.org
Add support for HVC and SMC instructions to the A32 and
T32 decoder. Using these for real exceptions to EL2 or EL3
is currently not supported (the do_interrupt routine does
not handle them) but we require the instruction support to
implement PSCI.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412865028-17725-6-git-send-email-peter.maydell@linaro.org
At the moment we try to handle c15_cpar with the strategy of:
* emit generated code which makes assumptions about its value
* when the register value changes call tb_flush() to throw
away the now-invalid generated code
This works because XScale CPUs are always uniprocessor, but
it's confusing because it suggests that the same approach can
be taken for other registers. It also means we do a tb_flush()
on CPU reset, which makes multithreaded linux-user binaries
even more likely to fail than would otherwise be the case.
Replace it with a combination of TB flags for the access
checks done on cp0/cp1 for the XScale and iwMMXt instructions,
plus a runtime check for cp2..cp13 coprocessor accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1411056959-23070-1-git-send-email-peter.maydell@linaro.org
ARMv8 single-stepping requires the exception level that controls
the single-stepping to be in AArch64 execution state, but the
code being stepped may be in AArch64 or AArch32. Implement the
necessary support code for single-stepping AArch32 code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The CPSR has a new-in-v8 execution state bit (IL), and
also some state which has effects in AArch32 but appears
only in the SPSR format (SS) but is RES0 in the CPSR.
Add the IL bit to CPSR_EXEC, and enforce that guest direct
reads and writes to CPSR can't read or write the RES0
bits, so the guest can't get at the SS bit which we store
in uncached_cpsr. This includes not permitting exception
returns to copy reserved bits from an SPSR into CPSR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The iwmmxt_msadb helper and its corresponding gen function are unused;
delete them. (This function appears to have never been used right back
to the initial implementation of iwMMXt; it is identical to iwmmxt_madduq,
and is presumably an accidental remnant from the initial development.)
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401822125-1822-1-git-send-email-peter.maydell@linaro.org
Bring the 32-bit CRC helper functions into line with the A64 ones,
by masking the high bytes of the value in the calling code rather
than the helper. This is more efficient since we can determine the
mask at translation time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-7-git-send-email-peter.maydell@linaro.org
Add support for the VMULL.P64 polynomial 64x64 to 128 bit multiplication
instruction in the A32/T32 instruction sets; this is part of the v8
Crypto Extensions.
To do this we have to move the neon_pmull_64_{lo,hi} helpers from
helper-a64.c into neon_helper.c so they can be used by the AArch32
translator.
Inspired-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-4-git-send-email-peter.maydell@linaro.org
The current undefreq field in the neon_3reg_wide handling allows us
to encode "UNDEF if size != 0" and "UNDEF if size == 0". This is
no longer sufficient with the advent of 64-bit polynomial VMULL,
which means we want to UNDEF if size == 1. Change the undefreq
encoding to use separate bits for all of "UNDEF if size == 0",
"UNDEF if size == 1" and "UNDEF if size == 2".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-3-git-send-email-peter.maydell@linaro.org
This adds support for the SHA1 and SHA256 instructions that are available
on some v8 implementations of Aarch32.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-2-git-send-email-peter.maydell@linaro.org
[PMM:
* rebase
* fix bad indent
* add a missing UNDEF check for Q!=1 in the 3-reg SHA1/SHA256 case
* use g_assert_not_reached()
* don't re-extract bit 6 for the 2-reg-misc encodings
* set the ELF HWCAP2 bits for the new features
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These will soon require cpu_ldst.h, so move them out of cpu.h.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h. This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1400980132-25949-12-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid using IS_USER directly as the MMU-idx to simplify future
changes to the MMU layout.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1400980132-25949-5-git-send-email-edgar.iglesias@gmail.com
Message-id: 1400805738-11889-6-git-send-email-edgar.iglesias@gmail.com
[PMM: parts relating to LDRT/STRT moved into earlier patches]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SRS instruction was using a hardcoded 0 for the memory
accesses. This happens to be OK since the SRS instruction is
UNPREDICTABLE in User and System modes, but is awkward if we
want to rearrange the MMU index uses. Switch to using
get_mem_index() like all the other accesses.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1400980132-25949-4-git-send-email-edgar.iglesias@gmail.com
Clean up the mmu index handling for ldrt/strt insns: instead
of a flag 'user' indicating whether to treat the store as user
mode or not, use 'memidx' to indicate the correct memory index to use.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1400980132-25949-3-git-send-email-edgar.iglesias@gmail.com
The smlald (and probably smlsld) instruction was doing incorrect sign
extensions of the operands amongst 64bit result calculation. The
instruction psuedo-code is:
operand2 = if m_swap then ROR(R[m],16) else R[m];
product1 = SInt(R[n]<15:0>) * SInt(operand2<15:0>);
product2 = SInt(R[n]<31:16>) * SInt(operand2<31:16>);
result = product1 + product2 + SInt(R[dHi]:R[dLo]);
R[dHi] = result<63:32>;
R[dLo] = result<31:0>;
The result calculation should be done in 64 bit arithmetic, and hence
product1 and product2 should be sign extended to 64b before calculation.
The current implementation was adding product1 and product2 together
then sign-extending the intermediate result leading to false negatives.
E.G. if product1 = product2 = 0x4000000, their sum = 0x80000000, which
will be incorrectly interpreted as -ve on sign extension.
We fix by doing the 64b extensions on both product1 and product2 before
any addition/subtraction happens.
We also fix where we were possibly incorrectly setting the Q saturation
flag for SMLSLD, which the ARM ARM specifically says is not set.
Reported-by: Christina Smith <christina.smith@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2cddb6f5a15be4ab8d2160f3499d128ae93d304d.1397704570.git.peter.crosthwaite@xilinx.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For system mode, we may have a 64 bit CPU which is currently executing
in AArch32 state; if we're dumping CPU state to the logs we should
therefore show the correct state for the current execution state,
rather than hardwiring it based on the type of the CPU. For consistency
with how we handle translation, we leave the 32 bit dump function
as the default, and have it hand off control to the 64 bit dump code
if we're in AArch64 mode.
Reported-by: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For ARMv8 there are two changes to the MVFR media feature registers:
* there is a new MVFR2 which is accessible from 32 bit code
* 64 bit code accesses these via the usual sysreg instructions
rather than with a floating-point specific instruction
Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The current A32/T32 decoder bases its "is VFP/Neon enabled?" check
on the FPSCR.EN bit. This is correct if EL1 is AArch32, but for
an AArch64 EL1 the logic is different: it must act as if FPSCR.EN
is always set. Instead, trapping must happen according to CPACR
bits for cp10/cp11; these cover all of FP/Neon, including the
FPSCR/FPSID/MVFR register accesses which FPSCR.EN does not affect.
Add support for CPACR checks (which are also required for ARMv7,
but were unimplemented because Linux happens not to use them)
and make sure they generate exceptions with the correct syndrome.
We actually return incorrect syndrome information for cases
where FP is disabled but the specific instruction bit pattern
is unallocated: strictly these should be the Uncategorized
exception, not a "SIMD disabled" exception. This should be
mostly harmless, and the structure of the A32/T32 VFP/Neon
decoder makes it painful to put the 'FP disabled?' checks in
the right places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Add new helpers exception_with_syndrome (for generating an exception
with syndrome information) and exception_uncategorized (for generating
an exception with "Unknown or Uncategorized Reason", which have a syndrome
register value of zero), and use them to generate the correct syndrome
information for exceptions which are raised directly from generated code.
This patch includes moving the A32/T32 gen_exception_insn functions
further up in the source file; they will be needed for "VFP/Neon disabled"
exception generation later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
For exceptions taken to AArch64, if a coprocessor/system register
access fails due to a trap or enable bit then the syndrome information
must include details of the failing instruction (crn/crm/opc1/opc2
fields, etc). Make the decoder construct the syndrome information
at translate time so it can be passed at runtime to the access-check
helper function and used as required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Currently cpu.h defines a mixture of functions and types needed by
the rest of QEMU and those needed only by files within target-arm/.
Split the latter out into a new header so they aren't needlessly
exposed further than required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
This adds support for [UF]RSQRTE instructions. It utilises the existing
NEON helpers with some changes. The changes include an explicit passing
of fpstatus (so the correct one is used between arm32 and aarch64),
denormilzation, more correct error handling and also proper scaling of
the fraction going into the estimate.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-25-git-send-email-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement URECPE and FRECPE instructions in both scalar and vector forms.
The actual reciprocal estimate function is shared with the A32/T32 Neon
code. However in A64 we aren't using the Neon "standard FPSCR value"
so extra checks are necessary to handle non-squashed denormal inputs
which can never happen for A32/T32. Calling conventions for the helpers
are thus modified to pass the fpst directly; we mark the helpers as
TCG_CALL_NO_RWG since we're changing the declarations anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-21-git-send-email-peter.maydell@linaro.org
Implement the PMULL instruction; this is the last unimplemented insn
in the three-reg-diff group.
Note that PMULL with size 3 is considered part of the AES part
of the crypto extensions (see the ID_AA64ISAR0_EL1 register definition
in the v8 ARM ARM), so it isn't necessary to burn an extra feature
bit on it, even though we're using more feature bits than a single
"crypto extension present/not present" toggle.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-2-git-send-email-peter.maydell@linaro.org
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implement WFE to yield our timeslice to the next CPU.
This avoids slowdowns in multicore configurations caused
by one core busy-waiting on a spinlock which can't possibly
be unlocked until the other core has an opportunity to run.
This speeds up my test case A15 dual-core boot by a factor
of three (though it is still four or five times slower than
a single-core boot).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393339545-22111-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Rob Herring <rob.herring@linaro.org>
Add support for AArch32 CRC32 and CRC32C instructions added in ARMv8
and add a CPU feature flag to enable these instructions.
The CRC32-C implementation used is the built-in qemu implementation
and The CRC-32 implementation is from zlib. This requires adding zlib
to LIBS to ensure it is linked for the linux-user binary.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393411566-24104-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that cpreg read and write functions can't fail and throw an
exception, we can remove the code from the translator that synchronises
the guest PC in case an exception is thrown.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several of the system registers handled via the ARMCPRegInfo
mechanism have access trap control bits controlling whether the
registers are accessible to lower privilege levels. Replace
the existing mechanism (allowing the read and write functions
to return EXCP_UDEF if access is denied) with a dedicated
"check access rights" function pointer in the ARMCPRegInfo.
This will allow us to simplify some of the register definitions,
which no longer need read/write functions purely to handle
the access checks.
We take the opportunity to define the return value from the
access checking function in a way that allows us to set the
correct exception syndrome information for exceptions taken
to AArch64 (which may need to distinguish access failures due
to a configurable trap or enable from other kinds of access
failure).
This commit defines the new mechanism but does not move any
of the registers across to use it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Log guest attempts to access unimplemented system registers via
the LOG_UNIMP reporting mechanism (for both the 32 bit and 64 bit
instruction sets). This is particularly useful for debugging
problems where the guest is trying to use a system register that
QEMU doesn't implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Add support for the AArch32 floating-point half-precision to double-
precision conversion VCVTB and VCVTT instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: fixed a minor missing-braces style issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 Advanced SIMD VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 Advanced SIMD VRINTA, VRINTN, VRINTP
VRINTM and VRINTZ instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 Advanced SIMD VRINTX instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VRINTX instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VRINTZ instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VRINTR instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for AArch32 ARMv8 FP VRINTA, VRINTN, VRINTP and VRINTM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VFP conversion helpers for A32 round to zero as this is the only
rounding mode supported. Rename these helpers to make it clear that
they round to zero and are not suitable for use in the AArch64 code.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.
The changes in semantics for the variables are:
exclusive_addr -> extended to 64 bits; -1ULL for "monitor lost",
otherwise always < 2^32 for AArch32
exclusive_val -> extended to 64 bits. 64 bit exclusives in AArch32 now
use the high half of exclusive_val instead of a separate exclusive_high
exclusive_high -> is no longer used in AArch32; extended to 64 bits as
it will be needed for AArch64's pair-of-64-bit-values exclusives.
exclusive_test -> extended to 64 bits, as it is an address. Since this is
a linux-user-only field, in arm-linux-user it will always have the top
32 bits zero.
exclusive_info -> stays 32 bits, as it is neither data nor address, but
simply holds register indexes etc. AArch64 will be able to fit all its
information into 32 bits as well.
Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The cpregs APIs used by the decoder (get_arm_cp_reginfo() and
cp_access_ok()) currently take either a CPUARMState* or an ARMCPU*.
This is problematic for the A64 decoder, which doesn't pass the
environment pointer around everywhere the way the 32 bit decoder
does. Adjust the parameters these functions take so that we can
copy only the relevant info from the CPUARMState into the
DisasContext and then use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the conditional branch (b.cond) instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure,
reused arm infrastructure for checking the flags]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A32/T32 gen_intermediate_code_internal() is complicated because it
has to deal with:
* conditionally executed instructions
* Thumb IT blocks
* kernel helper page
* M profile exception-exit special casing
None of these apply to A64, so putting the "this is A64 so
call the A64 decoder" check in the middle of the A32/T32
loop is confusing and means the A64 decoder's handling of
things like conditional jump and singlestepping has to take
account of the conditional-execution jumps the main loop
might emit.
Refactor the code to give A64 its own gen_intermediate_code_internal
function instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the AESE/AESD/AESMC/AESIMC instructions that
are available on some v8 implementations of Aarch32.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1386266078-6976-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Retain the existing gen_aa32_* inlines, to aid compilation for A64.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1386628626-21627-1-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the ARMv8 Advanced SIMD VMAXNM and VMINNM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Message-id: 1386158099-9239-7-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the ARMv8 floating point VMAXNM and VMINNM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-6-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the VSEL floating point selection instruction
which was added in ARMv8.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Floating point is an extension to the instruction set rather than
a coprocessor, so call it directly from the ARM and Thumb decode
functions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-2-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should translate AArch64 mode separately from AArch32 mode. In AArch64 mode,
registers look vastly different, instruction encoding is completely different,
basically the system turns into a different machine.
So let's do a simple if() in translate.c to decide whether we can handle the
current code in the legacy AArch32 code or in the new AArch64 code.
So far, the translation always complains about unallocated instructions. There
is no emulator functionality in this patch!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-11-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-5-git-send-email-john.rigby@linaro.org
[PMM:
* provide no-op versions of a64 functions ifndef TARGET_AARCH64;
this lets us avoid #ifdefs in translate.c
* insert the missing call to disas_a64_insn()
* stash the insn in the DisasContext rather than reloading it in
real_unallocated_encoding()
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds all the prerequisites for AArch64 support that didn't
fit into split up patches. It extends important bits in the core cpu
headers to also take AArch64 mode into account.
Add new ARM_TBFLAG_AARCH64_STATE translation buffer flag
indicate an ARMv8 cpu running in aarch64 mode vs aarch32 mode.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-10-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-4-git-send-email-john.rigby@linaro.org
[PMM:
* rearranged tbflags so AArch64? is bit 31 and if it is set then
30..0 are freely available for whatever makes most sense for that mode
* added version bump since we change VFP migration state
* added a comment about how VFP/Neon register state works
* physical address space is 48 bits, not 64
* added ARM_FEATURE_AARCH64 flag to identify 64-bit capable CPUs
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want gen_set_pc_im() to work for both AArch64 and AArch32, but
to do this we'll need the DisasContext* so we can tell which mode
we're in, so pass it in as a parameter.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-7-git-send-email-peter.maydell@linaro.org
Correct a few places that were using uint32_t or a 32 bit
only format string to handle something that should be a target_ulong.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-6-git-send-email-peter.maydell@linaro.org
[PMM: split out to separate patch; added gen_goto_tb() and
gen_set_pc_im() dest params to list of things to change.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cpu_env tcg variable will be used by both the AArch32 and AArch64
handling code. Unstaticify it, so that both sides can make use of it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-5-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-3-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need to share the disassembly status struct between AArch32 and
AArch64 modes. So put it into a header file that both sides can use.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-4-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-2-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AArch32 code (ie traditional 32 bit world) expects to be
able to pass a vaddr in a TCGv_i32. However when QEMU is
compiled with TARGET_LONG_BITS=32 the TCG load/store
functions take a TCGv_i64. Abstract out load/store with
a 32 bit vaddr so we have a place to put the zero extension
of the vaddr and the extension/truncation of the data value.
Apart from the function definitions most of this patch is
a simple s/tcg_gen_qemu_/gen_aa32_/.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-3-git-send-email-peter.maydell@linaro.org
In the decode of ARM B and BL insns, swap the order of the
"append 2 implicit zeros to imm24" and the sign extend, and
use the new sextract32() utility function to do the latter.
This avoids a direct dependency on the undefined C behaviour
of shifting into the sign bit of an integer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1378391908-22137-2-git-send-email-peter.maydell@linaro.org
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
aio / timers: use g_usleep() not sleep()
adlib: sort offsets in portio registration
qmp: fix integer usage in examples
tci: Remove function tcg_out64 (fix broken build)
target-arm: Report unimplemented opcodes (LOG_UNIMP)
pflash_cfi02.c: fix debug macro
configure: Remove unneeded redirections of stderr (pkg-config --exists)
configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
configure: Don't write .pyc files by default (python -B)
curl: qemu_bh_new() can never return NULL
slirp/arp_table.c: Avoid shifting into sign bit of signed integers
configure: disable clang -Wstring-plus-int warning
rdma: silly ipv6 bugfix
misc: Fix some typos in names and comments
slirp: Port redirection option behave differently on Linux and Windows
Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
These unimplemented opcodes are handled like illegal opcodes, but
they are used in existing code. We should at least report when they
are executed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add an ARM_CP_IO flag which an ARMCPRegInfo definition can use to
indicate that the register's implementation does I/O and thus
its accesses need to be surrounded by gen_io_start()/gen_io_end()
in order for icount to work. Most notably, cp registers which
implement clocks or timers need this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-3-git-send-email-peter.maydell@linaro.org
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
The ARMv8 SEVL instruction is in the architectural hint space already
emulated as nop. This makes the decoding of SEVL explicit for clarity.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Message-id: 1370606786-5650-3-git-send-email-mans@mansr.com
[PMM: added 'SEVL' to the TODO comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for the ARMv8 load acquire/store release instructions.
Since qemu does nothing special for memory barriers, these can be
emulated like their non-acquire/release counterparts.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also use bool type while at it.
Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Sergey Sorokin